meaning: broken pipe

Message from CP1515n printer problem: cannot write the print data, broken. What are the broken pipe?

I'm on a Mac 10.6.8 successfully using my printer C310 until recently when I got into trouble. The most recent message is 'broken pipe '.

I reset the network set up wizard on computer and printer, disconnected, closed, printer dropped and added, received test reports and network configuration, successful printer shows printer is connected, but when I send a print job, the printer is "idle" with employment showing 'impression' and after about 2 minutes, I get a message saying "BROKEN PIPE".

The only answer I found said something on the cusp, but the instructions are for a windows machine. My Mac does ' t have 'right click '. Is there a solution Mac for people using Mac computers, please?

Tags: HP HP Printers

Similar Questions

I try tom open a gz file and get an error message: Broken pipe error 32: can someone tell me how to open the files of theses and recover what is in them, in layman's terms please.

I used a program called by Kivisoft to recover my music files on my hard drive. He recovered their property, but they were in the form of a ZIP file with a gz file. But whenever I tried to open the ZIP file, I get an error message saying broken pipe 32 error. There, someone knows how to open these files and recover music on their part could you explain in simple terms that I'm not good with the user base of coding software. Thank you

Here are some steps for you: http://www.wikihow.com/Extract-a-Gz-File

You can start by trying utility GUI Tar to unzip the .gz file

C7280 all-in-One - download block at 12%, then 45% and prints a page at a time - broken pipe

Print Download hangs at 12% and 45%, then quit printing with error message "order - cannot print data. Broken pipe. This can be corrected?

Hi JGarner98,

An error in conduct broken is a programming construct that is designed for data "pipe" from one point to another. From the description you have provided, it seems that yout said operating system which is has lost the ability to write the date on the printer. This is usually caused by some kind of corruption in the CUPS printing system.

CUPS consists of a print spooler and Scheduler, a filter system that converts the print data in a format that the printer will understand and a back-end system that sends this data to the print device. CUPS uses the IPP (Internet Printing) Protocol as a basis for the management of the work of printing and queues. - Source

To resolve this problem, I think that the best approach is to reset the printing system, repair disk permissions, add the printer using the driver and try to print again.

Reset the printing system
1. Click on the Apple icon ( ), then click on System Preferences.

(Send failed: Broken Pipe) Adobe Muse error when uploading to the FTP host

Help, please
I can not download my adobe site muse at godaddy more.
I tried directly from muse and also with filezilla.
He continues to stop during the download with several errors at different times, but the principal seems to be - send failure - Broken Pipe. »
I think that its to do with assets, but can not see what is the problem with the assets and it seems to not be alone.
I tried to understand me, but there seems no more fixing it.
Can someone help me please? the site took a lot of work to do if its too much work to recreate from scratch. The file is corrupted? is the problem with godaddy? I'm not sure.
I spent time talking with godaddy, but that did not help the problem so far.
Help, please.
screenshots of the errors below.

Try to use the passive FTP connection.

Broken Pipe IOException while sending the last piece of the customer

We receive this intermittent error (presume under load relatively higher than normal in the circumstances), the function runs server-side gets broken while trying to rewrite the answer. His clear customer hung up before is made server function. Trying to understand what customer parameters used to hook / Server uses to complete the connection.
Alert system of distributed system
: [warning 01/02/2013 19:31:52.594 HKT function execution Processor22759 tid = 0x111dd] Exception on the server during execution of function: com.* *. GetPositions@268354ce
com.gemstone.gemfire.cache.execute.FunctionException: IOException when sending the last piece to the customer
at com.gemstone.gemfire.internal.cache.execute.ServerToClientFunctionResultSender65.lastResult(ServerToClientFunctionResultSender65.java:85)
at com.gemstone.gemfire.internal.cache.execute.DistributedRegionFunctionResultSender.lastResult(DistributedRegionFunctionResultSender.java:82)
at com.gemstone.gemfire.internal.cache.execute.DistributedRegionFunctionResultSender.sendException(DistributedRegionFunctionResultSender.java:218)
at com.************************.. GetPositions.execute (GetPositions.java:73)
at com.gemstone.gemfire.internal.cache.execute.AbstractExecution.executeFunctionLocally(AbstractExecution.java:337)
to com.gemstone.gemfire.internal.cache.execute.AbstractExecution$ 2.run(AbstractExecution.java:301)
to java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (unknown Source)
to java.util.concurrent.ThreadPoolExecutor$ Worker.run (unknown Source)
at com.gemstone.gemfire.distributed.internal.DistributionManager.runUntilShutdown(DistributionManager.java:639)
to com.gemstone.gemfire.distributed.internal.DistributionManager$ $8 1.run(DistributionManager.java:1063)
at java.lang.Thread.run (unknown Source) caused by: java.net.SocketException: Broken pipe
at java.net.SocketOutputStream.socketWrite0 (Native Method)
at java.net.SocketOutputStream.socketWrite (unknown Source)
at java.net.SocketOutputStream.write (unknown Source)
at com.gemstone.gemfire.internal.cache.tier.sockets.Message.flushBuffer(Message.java:538)
at com.gemstone.gemfire.internal.cache.tier.sockets.Message.sendBytes(Message.java:514)
at com.gemstone.gemfire.internal.cache.tier.sockets.ChunkedMessage.sendChunk(ChunkedMessage.java:306)
at com.gemstone.gemfire.internal.cache.execute.ServerToClientFunctionResultSender65.lastResult(ServerToClientFunctionResultSender65.java:79)
... more than 10
Observation, we see the message below before the above. Not necessarily, it's just an observation.
Alert system of distributed system
[: [warning 01/02/2013 19:31:50.906 HKT ServerConnection on port 54413 wire 32147 tid = 0x111e9] connection to the server of [identity (***(26906:loner):55257:55 d 79179: ServiceClient, connection = 3; port = 45025)]: Handshake accept failed on socket Socket[addr=/14.129.48.113,port=45025,localport=54413]: java.net.SocketException: Broken pipe
The bells?

You're right - the customer hung up before the server was able to send a response to him. In this case, the server has received the request of the customer and customer was waiting for an answer from him. The duration for which the customer is waiting for a response from the server is set by the customer read-timeout parameter.

In addition, it is worth looking at why the server sometimes (not always) take so long to answer. If some function calls to take more time? In this case, read-timeout to the customer must be increased to take account of this possibility. Or is that sometimes something happens in the server which makes it insensitive? Your previous question, I was just looking at that comes to mind here - in this case the culprit was a break from GC. This problem may be caused by a break from GC as well.

Impossible to turn on the virtual machine with the following error: could not open the disk ' / path/to/vmdk-0001.vmdk ' or one of the Flash disk it depends on. Reason: Broken pipe.

After the movement of virtual machines in VmWare Server 2 for ESX 4i, I get this error when you try to start the virtual machine:
Impossible to turn on the virtual machine with the following error: could not open the disc
"/ path/to/vmdk-0001.vmdk" or one of the Flash disk it depends on.
Reason: Broken pipe.
Anyone's idea what is the problem here?

How did you move virtual machines?

Did you use the converter (https://www.vmware.com/tryvmware/?p=converter)

Otherwise try converter

Solaris error: 32: Broken pipe
Dear Sir.

Yesterday, I found in the log file alert warning bellows.
and in this time some customers tell us they are cannot log on
on-demand. After a few times they could open a session
database automatically.

Oracle Database 10g
Version:-10.2.0.4
OS:-Sun Solaries spark
and
It's dedicated environment.

In the settings file
----------------------

process = 4000

The alert log file content.
===================

Mon Dec 6 16:03 2010
Thread 1 Advanced to record the sequence 67690 (switch LGWR)
Currently Journal # 3 seq # 67690 mem # 0: /d01/oracle/oradata/stlbas/redo03.log
Mon 6 dec 16:20:39 2010
Process J000 died, see his trace file
Mon 6 dec 16:20:39 2010
kkjcre1p: unable to reproduce the jobq slave process
Mon 6 dec 16:20:39 2010
Errors in the /d04/admin/stlbas/bdump/stlbas_cjq0_1885.trc file:

Process J000 died, see his trace file
Mon 6 dec 16:20:45 2010
kkjcre1p: unable to reproduce the jobq slave process
Mon 6 dec 16:20:45 2010
Errors in the /d04/admin/stlbas/bdump/stlbas_cjq0_1885.trc file:

Mon 6 dec 16:21:01 2010
Process J000 died, see his trace file
Mon 6 dec 16:21:01 2010
kkjcre1p: unable to reproduce the jobq slave process
Mon 6 dec 16:21:01 2010
Errors in the /d04/admin/stlbas/bdump/stlbas_cjq0_1885.trc file:

Mon 6 dec 16:21:17 2010
Process J000 died, see his trace file
Mon 6 dec 16:21:17 2010
kkjcre1p: unable to reproduce the jobq slave process
Mon 6 dec 16:21:17 2010
Errors in the /d04/admin/stlbas/bdump/stlbas_cjq0_1885.trc file:

Mon 6 dec 16:36:24 2010
Process J000 died, see his trace file
Mon 6 dec 16:36:24 2010
kkjcre1p: unable to reproduce the jobq slave process
Mon 6 dec 16:36:24 2010
Errors in the /d04/admin/stlbas/bdump/stlbas_cjq0_1885.trc file:

Process J000 died, see his trace file
Mon 6 dec 16:36:30 2010
kkjcre1p: unable to reproduce the jobq slave process
Mon 6 dec 16:36:30 2010
Errors in the /d04/admin/stlbas/bdump/stlbas_cjq0_1885.trc file:

Mon 6 dec 16:36:41 2010
Process J000 died, see his trace file
Mon 6 dec 16:36:41 2010
kkjcre1p: unable to reproduce the jobq slave process
Mon 6 dec 16:36:41 2010
Errors in the /d04/admin/stlbas/bdump/stlbas_cjq0_1885.trc file:

Mon 6 dec 16:38:18 2010
Thread 1 Advanced to record the sequence 67691 (switch LGWR)
Currently Journal # 4, seq # 67691 mem # 0: /d01/oracle/oradata/stlbas/redo04.log

the trace is - file content
==========================

/D04/Admin/stlbas/bdump/stlbas_cjq0_1885.TRC
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production 64-bit
With partitioning, Oracle Label Security, OLAP, Data Mining engine of rating
and Real Application Testing options
ORACLE_HOME = / d04/oracle/ora102
Name of the system: SunOS
Name of the node: badb1
Version: 5.10
Version: Generic_142900-07
Machine: sun4v
Instance name: stlbas
Redo thread mounted by this instance: 1
Oracle process number: 26
The Unix process PID: 1885, image: oracle@badb1 (CJQ0)

SERVICE NAME:(SYS$BACKGROUND) 2010-12-01 13:24:30.248
SESSION ID: (2191.1) 2010-12-01 13:24:30.248
2010-12-01 13:24:30.248
Process J000 died (pid = 25006, 3 = State):
2010-12-01 13:24:37.277
Process J000 died (pid = 25012, State = 3):
2010-12-01 13:59:56.397
J000 process is dead (pid = 1185, State = 3):
2010-12-01 15:55:42.277
Process J000 died (pid = 15686, 3 = State):
2010-12-06 16:20:39.526
J000 process is dead (pid = 9458, State = 3):
2010-12-06 16:20:45.565
J000 process is dead (pid = 9480, State = 3):
2010-12-06 16:21:01.641
J000 process is dead (pid = 9518, State = 3):
2010-12-06 16:21:17.712
J000 process is dead (pid = 9550, State = 3):
2010-12-06 16:36:24.213
Process J000 died (pid = 11942, State = 3):
2010-12-06 16:36:30.238
Process J000 died (pid = 11970, State = 3):
2010-12-06 16:36:41.289
Process J000 died (pid = 11998, State = 3):

content of the file log listener as bellows (at that time only)
=====================================

December 6, 2010 16:16:21 * (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = STLBAS) (CID = (PROGRAM = D:\OraNT\BIN\ifrun60. (EXE) (Host = app-07) (User = 001zohur))) * (ADDRESS = (PROTOCOL = tcp)(HOST=10.11.1.36) (PORT = 1771)) * establish * STLBAS * 0
December 6, 2010 16:16:21 * (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = STLBAS) (CID = (PROGRAM = D:\OraNT\BIN\RWRBE60.exe)(HOST=APPLICATION-02)(USER=154shahadat))) * (ADDRESS = (PROTOCOL = tcp (PORT = 1528))(HOST=10.11.1.32)) * establish * STLBAS * 0)))
December 6, 2010 16:16:21 * (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = STLBAS) (CID = (PROGRAM = D:\OraNT\BIN\RWRBE60.exe)(HOST=APPLICATION-07)(USER=043sathekur))) * (ADDRESS = (PROTOCOL = tcp (PORT = 1758))(HOST=10.11.1.36)) * establish * STLBAS * 12518)))
TNS-12518: TNS:listener could not hand off client connection
AMT-12547: TNS: lost contact
AMT-12560: TNS:protocol adapter error
AMT-00517: lost contact
Solaris error: 32: Broken pipe
December 6, 2010 16:16:21 * (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = STLBAS) (CID = (PROGRAM = D:\OraNT\BIN\ifrun60. (EXE) (Host = app-07) (User = 038alfee))) * (ADDRESS = (PROTOCOL = tcp (PORT = 1772))(HOST=10.11.1.36)) * establish * STLBAS * 12518
TNS-12518: TNS:listener could not hand off client connection
AMT-12547: TNS: lost contact
AMT-12560: TNS:protocol adapter error
AMT-00517: lost contact
Solaris error: 32: Broken pipe
December 6, 2010 16:16:22 * service_update * stlbas * 0
December 6, 2010 16:16:24 * service_update * stlbas * 0
December 6, 2010 16:16:25 * (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = STLBAS) (CID = (PROGRAM = D:\OraNT\BIN\ifrun60. (EXE) (Host = app-07) (User = 003aftab))) * (ADDRESS = (PROTOCOL = tcp (PORT = 1794))(HOST=10.11.1.36)) * establish * STLBAS * 12518
TNS-12518: TNS:listener could not hand off client connection
AMT-12547: TNS: lost contact
AMT-12560: TNS:protocol adapter error
AMT-00517: lost contact
Solaris error: 32: Broken pipe
December 6, 2010 16:16:25 * (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = STLBAS) (CID = (PROGRAM = D:\OraNT\BIN\RWRBE60.exe)(HOST=NEW-SUN-APP)(USER=023sohel))) * (ADDRESS = (PROTOCOL = tcp (PORT = 4291))(HOST=10.11.1.37)) * establish * STLBAS * 12518)))
TNS-12518: TNS:listener could not hand off client connection
AMT-12547: TNS: lost contact
AMT-12560: TNS:protocol adapter error
AMT-00517: lost contact
Solaris error: 32: Broken pipe
December 6, 2010 16:16:27 * (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = STLBAS) (CID = (PROGRAM = D:\OraNT\BIN\ifrun60. (EXE) (Host = app-07) (User = 038alfee))) * (ADDRESS = (PROTOCOL = tcp)(HOST=10.11.1.36) (PORT = 1796)) * establish * STLBAS * 0
December 6, 2010 16:16:27 * (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = STLBAS) (CID = (PROGRAM = D:\OraNT\BIN\ifrun60. (EXE) (Host = app-07) (User = 038alfee))) * (ADDRESS = (PROTOCOL = tcp (PORT = 1797))(HOST=10.11.1.36)) * establish * STLBAS * 0
December 6, 2010 16:16:28 * (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = STLBAS) (CID = (PROGRAM = D:\OraNT\BIN\RWRBE60.exe)(HOST=APPLICATION-11)(USER=030salah))) * (ADDRESS = (PROTOCOL = tcp (PORT = 3982))(HOST=10.11.1.33)) * establish * STLBAS * 0)))
December 6, 2010 16:16:29 * (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = stlbas) (CID = (PROGRAM = D:\OraNT\BIN\ifrun60. (EXE) (Host = REPORTS_APP) (User = 504refayet))) * (ADDRESS = (PROTOCOL = tcp (PORT = 4995))(HOST=10.11.1.233)) * establish * stlbas * 0
December 6, 2010 16:16:29 * (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = STLBAS) (CID = (PROGRAM = D:\OraNT\BIN\ifrun60. (EXE) (Host = app-07) (User = 019aporna))) * (ADDRESS = (PROTOCOL = tcp (PORT = 1800))(HOST=10.11.1.36)) * establish * STLBAS * 0
December 6, 2010 16:16:29 * (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = stlbas) (CID = (PROGRAM = D:\OraNT\BIN\ifrun60. (EXE) (Host = REPORTS_APP) (User = 504refayet))) * (ADDRESS = (PROTOCOL = tcp (PORT = 4996))(HOST=10.11.1.233)) * establish * stlbas * 0
December 6, 2010 16:16:30 * (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = STLBAS) (CID = (PROGRAM = D:\OraNT\BIN\ifrun60. (EXE) (Host = app-07) (User = 003aftab))) * (ADDRESS = (PROTOCOL = tcp)(HOST=10.11.1.36) (PORT = 1801)) * establish * STLBAS * 12518
TNS-12518: TNS:listener could not hand off client connection
AMT-12547: TNS: lost contact
AMT-12560: TNS:protocol adapter error
AMT-00517: lost contact
Solaris error: 32: Broken pipe
December 6, 2010 16:16:30 * (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = STLBAS) (CID = (PROGRAM = D:\OraNT\BIN\ifrun60. (EXE) (Host = app-07) (User = 019aporna))) * (ADDRESS = (PROTOCOL = tcp (PORT = 1802))(HOST=10.11.1.36)) * establish * STLBAS * 12518
TNS-12518: TNS:listener could not hand off client connection
AMT-12547: TNS: lost contact
AMT-12560: TNS:protocol adapter error
AMT-00517: lost contact
Solaris error: 32: Broken pipe
December 6, 2010 16:16:30 * service_update * stlbas * 0
December 6, 2010 16:16:30 * (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = stlbas) (CID = (PROGRAM = D:\OraNT\BIN\ifrun60. (EXE) (Host = REPORTS_APP) (User = 501azad))) * (ADDRESS = (PROTOCOL = tcp (PORT = 4997))(HOST=10.11.1.233)) * establish * stlbas * 0
December 6, 2010 16:16:31 * (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = stlbas) (CID = (PROGRAM = D:\OraNT\BIN\ifrun60. (EXE) (Host = REPORTS_APP) (User = 501azad))) * (ADDRESS = (PROTOCOL = tcp (PORT = 4999))(HOST=10.11.1.233)) * establish * stlbas * 0
December 6, 2010 16:16:32 * service_update * stlbas * 0

What is the cause?
and
why he showed "error on Solaris: 32: Broken pipe"? Please

Best regards
Halim
>

RESOURCE_NAME CURRENT_UTILIZATION MAX_UTILIZATION INITIAL_AL LIMIT_VALU
------------------------------ ------------------- --------------- ---------- ----------
process of 1607 4000 4000 4000
1596 4005 4405 4405 sessions

You have reached your maximum use of the process parameter.

Therefore, increase the setting of sessions and processes and take the rebound in the database to reflect the changes.

Concerning
Rajesh

Published by: Rajesh on December 7, 2010 15:52

test code doesn't have a hard drive (305) made this means broken hard drive

I did diagnostic check laptop cos running rough. get message saying failed the test of hard drive full hard disk1 (305)

This means my hard drive is broken also get rather awkward ideas noise type please?

Hello

305 error code is a failure of the complete (Full) disk Self Test (DST) and would indicate that hard is defective and must be replaced.

If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

If you live in the United States, contact HP here.

If you are in another part of the world, begin here.

If you are out of warranty and would like a guide to replacing the hard drive yourself, please let me know - include the full model number and the laptop Nr - see here for an explanation.

Kind regards

DP - K

Pipe broken errors
Just something I noticed in my logs of earphone apex.

I continue to see what is happening again and again. Any suggestions on her back?

-15/2/11 09:52 (31 minutes 13 seconds ago).
Pipe broken
Hello David,.

just do you see it in the newspapers, or you have users complaining that something doesn't quite work?
The reason the most common "Broken pipe" are users who stop at an application in their browser before the response was completely submitted. To stop, the user has not even need explicitly press a button of browser or escape key: If you have fairly complex pages with a relatively long loading time or response time longer due to a higher load, a user can continue to click the next target, without waiting for the loading of the page complete.
If everything works as expected, I keep on this message.

-Udo

IPS - Segmentation fault

Hi all

I'm running out of 2 IPS, I've updated them, with a signature.

The one loaded properly, the other... Well basically gave me the following

Connection ICCIPS:

Password:

Last login: my Jul 11 11:38:25 on ttyS0

NOTICE *.

This product contains cryptographic features and is under the United States

and local laws governing the import, export, transfer and use. Delivery

Cisco cryptographic products does not imply permission to third parties to import,

export, distribute or use encryption. Importers, exporters, distributors and

users are responsible for compliance with U.S. and local country. With the help of

This product you agree to comply with the regulations and laws in force. If you

are unable to meet the United States and local laws, return the product.

A summary of U.S. laws governing Cisco cryptographic products to:

http://www.Cisco.com/WWL/export/crypto/tool/stqrg.html

If you need assistance please contact us by mail at

[email protected] / * /.

Error: Unable to communicate with mainApp (getVersion). Please contact your system administrator.

You want to run cidDump? [No]: Yes

Transfer file to remote server or display it on the screen? [transfer]: display

/ usr/CIDS/idsRoot/bin/cidDump: line 233: 20371 Broken pipe cat $IDSROOT/etc/config/signatureDefinition/default.xml

Segmentation fault 20372 | d gzip - > $TMPDIR/cidDump.output

Is there an easy way to solve this, or is this average recreate the image?

Hi Martin,

The message "error: cannot communicate with mainApp (getVersion).» Please contact your system administrator. "you had means that there was a failure of software on your IPS.

Reset the module deletes it (and he did), but he might come back then I advise you to upgrade to the latest version on the train, you're running to pick up all the patches that have been integrated to the it and prosecute TAC if you are interested in the exact cause of the problem.

Kind regards

Nicolas

Dell XPS 8500 switched HDs, no boot, the stable yellow power light

I was constantly making messages on my hard drive (T SATA 1) default so I bit the bullet and went and bought a new drive (2 T SATA). I left the original disc in its original configuration and installed my new drive as a secondary drive. I used Macrium reflex to try to clone the old drive to the new. I kept getting "failed to clone - broken pipe" message after about 93 percent of cloning. So I thought I would try to start using the new disc and dial-up connectors to entire hard drive after power off the power. After trying to reverse, all I get is a constant power of light yellow. The fans, the optical drive, etc are all performed, but nothing else happens. I turned off and turned back on the connection to the original installation. Same thing: only a yellow light. I know that a steady yellow light usually means some sort of failure of a component, but I believe that food is OK that everything in the case is running. Any help?

Have you tried to erase the BIOS?
1. Power off, unplug
2. Power button press / hold for about 15 seconds
3. Open the case and remove the motherboard battery
4. Power button press / hold for about 30 seconds
5. Connect your drive HARD bootable SATA0 port on the motherboard
6. Replace the battery and close the case. NOTE: may be time to install the new CR2032 battery, ~ $2
7. See if it boots now
Fixed Orange LED motherboard is not identical to a touch of solid amber power at the edge of the tower. I assume that your motherboard the saw is turned on (it's a good thing) but the Start button / stop is Orange fixed.

UNDER THE DIRECTION

Message error "arrested -"filter"has failed."

After upgrading to Mac OS Sierra, when you attempt to send a test print my Epson Stylus Photo 2200, I get the message error "stop -"filter"failure" in my print queue.

I have left clicked on the printer-> error log menu item, and I have the following in the error log.

E [27/Sep / 2016:10:04:40-0500] [Job 3] Job is stopped due to errors in filter; For more details, see the error_log file.

D [27/Sep / 2016:10:04:40-0500] [Job [3] the following messages have been saved since 10:04:38 to 10:04:40

D [27/Sep / 2016:10:04:40-0500] banner of start-up [Job 3] adding page 'none '.

D [27/Sep / 2016:10:04:40-0500] [Job 3] queued on the "EPSON_Stylus_Photo_2200" by "derekberube".

D [27/Sep / 2016:10:04:40-0500] file [Job 3] seized automatic...

D [27/Sep / 2016:10:04:40-0500] [Job 3] request file type is application / vnd.cups - banner.

D [27/Sep / 2016:10:04:40-0500] [Job 3] file of type application / vnd.cups - banner in queue 'derekberube '.

D [27/Sep / 2016:10:04:40-0500] [Job 3] end banner add page 'none '.

D [27/Sep / 2016:10:04:40-0500] [Job 3] time to processing = 1474988678

D [27/Sep / 2016:10:04:40-0500] [Job 3] 3 filters for task:

D [27/Sep / 2016:10:04:40-0500] [Job 3] cgbannertopdf (application / vnd.cups - banner to application/pdf, cost 33)

D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster (application/pdf in the application / vnd.cups - raster, cost 100)

D [27/Sep / 2016:10:04:40-0500] [Job 3] /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII (application / vnd.cups - raster to printer/EPSON_Stylus_Photo_2200, 0 cost)

D [27/Sep / 2016:10:04:40-0500] [Job 3] job-sheets = none, none

D [27/Sep / 2016:10:04:40-0500] [Job 3] argv [0] = "EPSON_Stylus_Photo_2200".

D [27/Sep / 2016:10:04:40-0500] [Job 3] argv [1] = '3 '.

D [27/Sep / 2016:10:04:40-0500] [Job 3] argv [2] = "derekberube".

D [27/Sep / 2016:10:04:40-0500] [Job 3] argv [3] = "testprint.

D [27/Sep / 2016:10:04:40-0500] [Job 3] argv [4] = "1".

D [27/Sep / 2016:10:04:40-0500] [Job 3] argv [5] = "AP_ColorMatchingMode = AP_VendorColorMatching AP_D_InputSlot = nocollate com.apple.print.DocumentTicket.PMSpoolFormat=application/pdf com.apple.print.JobInfo.PMJobName = testprint com.apple.print.PrinterInfo.PMColorDeviceID... n. = 23775 com.apple.print.PrintSettings.PMCopies... n = 1 com.apple.print.PrintSettings.PMCopyCollate... b. com.apple.print.PrintSettings.PMFirstPage... n = 1 com.apple.print.PrintSettings.PMLastPage... n = 2147483647 com.apple.print.PrintSettings.PMPageRange... a.0... n = 1 com.apple.print.PrintSettings.PMPageRange... a.1... n. = 2147483647 fit-to-page media = letter requested by pserrorhandler = standard job-uuid=urn:uuid:8781dff0-21e9-31ef-5b09-534d193452be job-originating-name of host = localhost to-date-time-create = date-time-to-processing = time-to-creation" time processing 1474988678 = 1474988678 = document-name-supplied testprint PageSize = letter»

D [27/Sep / 2016:10:04:40-0500] [Job 3] argv [6] = "/ private/var/spool/cups/d00003-001.

D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [0] = "< CFProcessPath >".

D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [1] = "CUPS_CACHEDIR = / private/var/spool/cups/cache '.

D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [2] = "CUPS_DATADIR = / usr/share/cups.

D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [3] = "CUPS_DOCROOT = / usr/share/doc/cups.

D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [4] = "CUPS_FONTPATH = / usr/share/cups/fonts.

D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [5] = "CUPS_REQUESTROOT = / private/var/spool/cups.

D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [6] = "CUPS_SERVERBIN = / usr/libexec/cups.

D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [7] = "CUPS_SERVERROOT = / private/etc/cups.

D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [8] = "CUPS_STATEDIR = / private/etc/cups.

D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [9] = "HOST = / private/var/spool/cups/tmp".

D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [10] = "" PATH = / usr/libexec/cups/filter: / usr/bin: / usr/sbin: / bin: / usr/bin ""

D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [11] = "[email protected]".

"D [27/Sep / 2016:10:04:40-0500] [Job 3] envp[12]="SOFTWARE=CUPS/2.2.0 ".

D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [13] = ' TMPDIR = / private/var/spool/cups/tmp ".

D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [14] = "USER = root"

D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [15] = "CUPS_MAX_MESSAGE = 2047"

D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [16] = ' CUPS_SERVER = / private/var/run/cupsd.

D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [17] = "CUPS_ENCRYPTION = IfRequested"

D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [18] = 'IPP_PORT = 631'

D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [19] = "CHARSET = utf-8"

D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [20] = "LANG = fr_FR. UTF - 8"

D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [21] = "APPLE_LANGUAGE = en - en"

"D [27/Sep / 2016:10:04:40-0500] [Job 3] envp[22]="PPD=/private/etc/cups/ppd/EPSON_Stylus_Photo_2200.ppd ".

D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [23] = "RIP_MAX_CACHE = 128 m"

D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [24] = "' CONTENT_TYPE = application / vnd.cups - banner" "

D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [25] = "DEVICE_URI = 0 usb://EPSON/Stylus%20Photo%202200?serial=L5602021107061925"

D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [26] = "PRINTER_INFO = EPSON Stylus Photo 2200"

D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [27] = "PRINTER_LOCATION = MacBook Pro Derek Berube\"

D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [28] = "PRINTER is EPSON_Stylus_Photo_2200"

D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [29] = "PRINTER_STATE_REASONS = none"

D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [30] = "CUPS_FILETYPE = document"

D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [31] = "" FINAL_CONTENT_TYPE = vnd.cups - raster/application ""

D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [32] = "AUTH_I."

D [27/Sep / 2016:10:04:40-0500] [Job 3] Started filter/usr/libexec/cups/filter/cgbannertopdf (PID 2075)

D [27/Sep / 2016:10:04:40-0500] [Job 3] Started filter /Library/Printers/EPSON/InkjetPrinter2/Filter/pdftopdf2.app/Contents/MacOS/pdft opdf2 (PID 2076)

D [27/Sep / 2016:10:04:40-0500] [Job 3] Started filter/usr/libexec/cups/filter/cgpdftoraster (PID 2077)

D [27/Sep / 2016:10:04:40-0500] [Job 3] Started filter /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII (PID 2078)

D [27/Sep / 2016:10:04:40-0500] [Job 3] Started backend/usr/libexec/cups/backend/usb (PID 2079)

"D [27/Sep / 2016:10:04:40-0500] [Job 3] Message catalog filename is \"/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Framework s/PrintCore.framework/Versions/A/Resources/English.lproj/cups_apple.strings\.

D [27/Sep / 2016:10:04:40-0500] [Job 3] load_banner(filename=\"/private/var/spool/cups/d00003-001\")

D [27/Sep / 2016:10:04:40-0500] [Job 3] usb: AppleLanguages =-"en - US\".

D [27/Sep / 2016:10:04:40-0500] [Job 3] STATE: + connection-device

D [27/Sep / 2016:10:04:40-0500] [Job 3] looking for \'EPSON Stylus Photo 2200\'

D [27/Sep / 2016:10:04:40-0500] [Job 3] open connection

D [27/Sep / 2016:10:04:40-0500] [Job 3] PID 2078 (/Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacO S/rastertoescpII) was arrested with the 206 State (output Interface queue is full)

D [27/Sep / 2016:10:04:40-0500] [Job 3] Tip: try to set the LogLevel "debug" to learn more.

D [27/Sep / 2016:10:04:40-0500] [Job 3] Page = 612 x 792; 9.40 at 603-783

D [27/Sep / 2016:10:04:40-0500] [Job 3] directory ' / Library/Printers/EPSON/CIOSupport/EPSONUSBPrintClass.plugin ' permissions OK (040755/uid = 0/gid = 80).

D [27/Sep / 2016:10:04:40-0500] [Job 3] directory ' / System/Library/Printers/Libraries/USBGenericPrintingClass.plugin ' permissions OK (040755/uid = 0/gid = 0).

D [27/Sep / 2016:10:04:40-0500] [Job 3] load_classdriver(/System/Library/Printers/Libraries/USBGenericPrintingClass.plu gin) (kr:0 x 00000000)

D [27/Sep / 2016:10:04:40-0500] [Job 3] load_classdriver(/Library/Printers/EPSON/CIOSupport/EPSONUSBPrintClass.plugin) (kr:0 x 00000000)

"D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: copy to temp \"/private/var/spool/cups/tmp/0081d57f93b5a\ print file '.

D [27/Sep / 2016:10:04:40-0500] [Job 3] STATE:-connecting-to-device

D [27/Sep / 2016:10:04:40-0500] [Job 3] sending data to the printer.

D [27/Sep / 2016:10:04:40-0500] [Job 3] sent 0 bytes...

D [27/Sep / 2016:10:04:40-0500] [Job 3] STATE: + cups-wait-for-work-over

D [27/Sep / 2016:10:04:40-0500] [Job 3] align for banner 1.

D [27/Sep / 2016:10:04:40-0500] [Job 3] PID 2075 (/ usr/libexec/cups/filter/cgbannertopdf) came out without error.

D [27/Sep / 2016:10:04:40-0500] [Job 3] PID 2076 (/Library/Printers/EPSON/InkjetPrinter2/Filter/pdftopdf2.app/Contents/MacOS/pdf topdf2) came out without error.

D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: \"/private/var/spool/cups/tmp/0081d57f93b5a\"has 1 pages.

D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: open \"/private/etc/cups/ppd/EPSON_Stylus_Photo_2200.ppd\ file PPD «...»

D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: PreferredRotation = - 90

D [27/Sep / 2016:10:04:40-0500] [Job 3] cupsPageSize = [612 792], cupsImagingBBox = [9 40 603 783]

D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: width = 612, length = 792, high = 9, low = 40, left = 9, right = 9

D [27/Sep / 2016:10:04:40-0500] [Job 3] cupsWidth = 2970, cupsHeight = 3715

D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: languageLevel = 3, mediaBox.size.width = 612, mediaBox.size.height = 792

D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: colorspace = 1, bitsPerColor = 8

D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: the seller matching mode is turned on and the requested transfer color space is sRGB.

D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: skipBytesPerRow = 8

D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: bandwidth = 2970, bytesPerRow = 11888, band height = 3715, height = 3715

D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: width of the frame = 2970, height = 3715 bitsPerComponent is 8, bitsPerPixel = 32 bytesPerRow = 11888, bitmapInfo = 5, resolution = (360.000000, 360.000000)

D [27/Sep / 2016:10:04:40-0500] [Job 3] HWResolution = [360 360]

D [27/Sep / 2016:10:04:40-0500] [Job 3] ImagingBoundingBox = [9 40 603 783]

D [27/Sep / 2016:10:04:40-0500] [Job 3] margins = [9-40]

D [27/Sep / 2016:10:04:40-0500] [Job 3] PageSize = [612 792]

D [27/Sep / 2016:10:04:40-0500] [Job 3] cupsWidth = 2970

D [27/Sep / 2016:10:04:40-0500] [Job 3] cupsHeight = 3715

D [27/Sep / 2016:10:04:40-0500] [Job 3] cupsBitsPerColor = 8

D [27/Sep / 2016:10:04:40-0500] [Job 3] cupsBitsPerPixel = 24

D [27/Sep / 2016:10:04:40-0500] [Job 3] cupsBytesPerLine = 8910

D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: rasterWriteHeader: unable to write the header streams raster: Broken pipe

D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: bytes written for the side 1 = 0, err = 5

D [27/Sep / 2016:10:04:40-0500] [Job 3] PID 2077 (/ usr/libexec/cups/filter/cgpdftoraster) came out without error.

D [27/Sep / 2016:10:04:40-0500] [Job 3] waiting for read thread exits...

D [27/Sep / 2016:10:04:40-0500] [Job 3] PID 2079 (/ usr/libexec/cups/backend/usb) came out without error.

D [27/Sep / 2016:10:04:40-0500] [Job 3] end of messages

D [27/Sep / 2016:10:04:40-0500] [Job 3] printer - state = 3 (idle)

D [27/Sep / 2016:10:04:40-0500] [Job 3] printer-State-message = "Sending data to printer."

D [27/Sep / 2016:10:04:40-0500] [Job 3] - printer-motivation = none

Line 66 # in the above seems to indicate the rastertoescpII utility failed with a status code of 256 and the error message "output Interface queue is full.

Troubleshooting steps

To try to solve this problem, I followed the steps described in the article «problems of printer on your Mac» I have reset the printing system and it does not work. I have also unplugged the printer, deleted the contents of the folder/library/printers/and then plugged the printer into.

You will need to check with Epson to see if there is a new driver for your device compatible with macOS Sierra. The old drivers are not compatible. Even with the new driver, some people state that the error is not fixed :-( YMMV.

How to Power Nap, sleep & AutoPowerOff play together?

Hello

Configuration & system background: This is related to a network of small business for which I wrote a custom backup script that I have tested before deploying. The script rsyncs selected files from the workstation (2013 Mac Pro, OS X 10.11.6) on the server via wifi with an Airport Extreme. SSH without password is used by root to connect from the desktop to the server. The server is a Mac Mini (OS X 10.11.6/Server 5.1.7) 2014 end set not to sleep.

The script is loaded from launchd and is set to run at designated times throughout the day and night. It seems to work fine when my computer is awake. I read launchd to run programmed events when a computer wakes from sleep. What seems really do experience during the night (when I'm personally in mode "sleep"), it's that the script will run intermittently (i.e., not to the regular time) but it fails because the first use of SSH (of rsync) will expire. Full hostname of the server is used in the script, Vice President of the IP address.

On the workstation, Power Nap is enabled and the computer is allowed to sleep. pmset standbydelay = 10800 (3 hrs) and autopoweroffdelay = 14400 (4 hours). My understanding is that information in Mail, Notes, Contacts, etc., will be updated only if these applications are running. on my computer, I think that Notes was the only one running all night.

Assumptions:

(1) power Nap allows the script runs because the computer has partial wake up during the night.

(2) the script is falling in the night economy modes of energy of the workstation do not allow DNS queries.

Then test: I got standbydelay and autopoweroffdelay every 12 hours and see if the script runs correctly this evening.

Issues related to the:

(1) my assumptions seem valid?

(2) which of these modes of standby energy disables searches DNS or other network activity?

(3) someone has a link to the proper documentation describing the technical inter-agency interactions when Power Nap is active?

Thanks in advance.

UPDATE: change the standbydelay and autopoweroffdelay every 12 hours seems to allow the script to run. Execution does not at the scheduled time, so in my opinion, it happens when something else wakes the computer (the NAP is enabled). However, it seems much more likely to be broken pipes at night that I do during the day, and I'm this troubleshooting.

On the server, I confirmed by the newspaper pmset that computer don't is not reported as being put to sleep, so now I am bad shooting other things which could cause a part of the network to not work properly.

So I think that I have answered my first question (i.e., valid assumptions), I'm still looking for help to question 3.

Thank you.

Firefox hangs at random times

Firefox crashes at random times (especially when java or flash is launched), especially after some time
killing a process plugin-container doesn't release not firefox, firefox trial of murder is the only solution for now
I have catchy to launch ff console and use ff until is freezes, but no error is printed in the console or in the file wiritted when its freezes ecept standard warns and massages, I used "firefox & > ~ / temp/firefoxcrashlog.log.

but I have firefox causing g and used until freez and look what I got

hav0ck@hssm:~$ firefox -g
GNU gdb (Ubuntu/Linaro 7.4-2012.04-0ubuntu2.1) 7.4-2012.04
Copyright (C) 2012 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <" rel="nofollow">http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.  Type "show copying"
and "show warranty" for details.
This GDB was configured as "i686-linux-gnu".
For bug reporting instructions, please see:
<" rel="nofollow">http://bugs.launchpad.net/gdb-linaro/>...
Reading symbols from /usr/lib/firefox/firefox...(no debugging symbols found)...done.
(gdb) start
Function "main" not defined.
Make breakpoint pending on future shared library load? (y or [n]) n
Starting program: /usr/lib/firefox/firefox
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/i386-linux-gnu/libthread_db.so.1".
[New Thread 0xb4132b40 (LWP 6922)]
[New Thread 0xb3221b40 (LWP 6923)]
[New Thread 0xb26ffb40 (LWP 6924)]
[New Thread 0xb1d3ab40 (LWP 6925)]
[New Thread 0xae4ffb40 (LWP 6938)]
[New Thread 0x9f3ffb40 (LWP 6939)]
[Thread 0xae4ffb40 (LWP 6938) exited]
[Thread 0x9f3ffb40 (LWP 6939) exited]
[New Thread 0xae4ffb40 (LWP 6940)]
[New Thread 0x9f3ffb40 (LWP 6941)]
[New Thread 0xa00fdb40 (LWP 6942)]
[New Thread 0x90efeb40 (LWP 6949)]
[New Thread 0x902ffb40 (LWP 6950)]
[New Thread 0x8fafeb40 (LWP 6951)]
[New Thread 0x8f2fdb40 (LWP 6952)]
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
[New Thread 0x8a6e0b40 (LWP 6975)]
[Thread 0x8fafeb40 (LWP 6951) exited]
[New Thread 0x8fafeb40 (LWP 6976)]
[New Thread 0x886ffb40 (LWP 6977)]
NOTE: child process received `Goodbye', closing down
[Thread 0x8fafeb40 (LWP 6976) exited]
[Thread 0x886ffb40 (LWP 6977) exited]
[New Thread 0x873ffb40 (LWP 6991)]
[New Thread 0x886ffb40 (LWP 6992)]
[New Thread 0x8fafeb40 (LWP 6993)]
[New Thread 0x86efeb40 (LWP 6994)]
[New Thread 0x85affb40 (LWP 6997)]
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
[Thread 0x85affb40 (LWP 6997) exited]
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
[New Thread 0x85affb40 (LWP 7171)]
[Thread 0xa08feb40 (LWP 6934) exited]
[New Thread 0xa08feb40 (LWP 7172)]
[Thread 0xa08feb40 (LWP 7172) exited]
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
[New Thread 0xa08feb40 (LWP 7210)]
[New Thread 0x9067cb40 (LWP 7220)]
[New Thread 0x9e0ccb40 (LWP 7222)]
[New Thread 0x8ea6fb40 (LWP 7223)]
[New Thread 0x898ffb40 (LWP 7224)]
[New Thread 0x898aeb40 (LWP 7226)]
[New Thread 0x8985db40 (LWP 7229)]
[Thread 0x918ffb40 (LWP 7219) exited]
[New Thread 0x918ffb40 (LWP 7251)]
[New Thread 0x81fb0b40 (LWP 7684)]
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
[Thread 0x81fb0b40 (LWP 7684) exited]
[Thread 0x85affb40 (LWP 7171) exited]
[New Thread 0x85affb40 (LWP 7708)]
[Thread 0x85affb40 (LWP 7708) exited]
[New Thread 0x85affb40 (LWP 7714)]
[New Thread 0x81fb0b40 (LWP 7724)]
[New Thread 0x8138ab40 (LWP 7729)]
[Thread 0x81fb0b40 (LWP 7728) exited]
[New Thread 0x81fb0b40 (LWP 7734)]
[Thread 0x81fb0b40 (LWP 7734) exited]
[New Thread 0x81fb0b40 (LWP 7735)]
[Thread 0x80b89b40 (LWP 7740) exited]
[New Thread 0x81fb0b40 (LWP 7744)]
[New Thread 0x80b89b40 (LWP 7745)]
[Thread 0x80b89b40 (LWP 7751) exited]
[New Thread 0x80b89b40 (LWP 7753)]
[New Thread 0x706ffb40 (LWP 7754)]
[New Thread 0x85affb40 (LWP 7846)]
NOTE: child process received `Goodbye', closing down
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
[Thread 0x706ffb40 (LWP 7844) exited]
[Thread 0x85affb40 (LWP 7846) exited]
[Thread 0x80b89b40 (LWP 7845) exited]
[New Thread 0x80b89b40 (LWP 7911)]
[Thread 0x80b89b40 (LWP 7911) exited]
[New Thread 0x80b89b40 (LWP 7912)]
[New Thread 0x85affb40 (LWP 7913)]
[Thread 0x85affb40 (LWP 7913) exited]
[Thread 0x80b89b40 (LWP 7912) exited]
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
[New Thread 0x80b89b40 (LWP 7917)]
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
[New Thread 0x85affb40 (LWP 7954)]
[Thread 0x85affb40 (LWP 7954) exited]
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
[New Thread 0x85affb40 (LWP 7964)]
[Thread 0x85affb40 (LWP 7964) exited]
[Thread 0x80b89b40 (LWP 7917) exited]
[New Thread 0x80b89b40 (LWP 8013)]
[New Thread 0x85affb40 (LWP 8014)]
[New Thread 0x706ffb40 (LWP 8015)]
[Thread 0x706ffb40 (LWP 8015) exited]
[Thread 0x80b89b40 (LWP 8013) exited]
[Thread 0x85affb40 (LWP 8014) exited]
[New Thread 0x85affb40 (LWP 8016)]
[Thread 0x85affb40 (LWP 8016) exited]
[New Thread 0x85affb40 (LWP 8018)]
[New Thread 0x80b89b40 (LWP 8019)]
[New Thread 0x706ffb40 (LWP 8020)]
[Thread 0x80b89b40 (LWP 8019) exited]
[Thread 0x706ffb40 (LWP 8020) exited]
[Thread 0x85affb40 (LWP 8018) exited]
NOTE: child process received `Goodbye', closing down
[Thread 0x81fb0b40 (LWP 7755) exited]
[New Thread 0x81fb0b40 (LWP 8062)]
[New Thread 0x81fb0b40 (LWP 8114)]
[New Thread 0x81fb0b40 (LWP 8151)]
[Thread 0x81fb0b40 (LWP 8151) exited]
NOTE: child process received `Goodbye', closing down
[Thread 0x85affb40 (LWP 8123) exited]
[New Thread 0x85affb40 (LWP 8158)]
[New Thread 0x81fb0b40 (LWP 8159)]
[Thread 0xa00fdb40 (LWP 8113) exited]
[Thread 0x81fb0b40 (LWP 8159) exited]
[Thread 0x85affb40 (LWP 8158) exited]
[New Thread 0x85affb40 (LWP 8167)]
[New Thread 0x81fb0b40 (LWP 8172)]
[Thread 0x81fb0b40 (LWP 8172) exited]
NOTE: child process received `Goodbye', closing down
[New Thread 0x81fb0b40 (LWP 8175)]
[New Thread 0xa00fdb40 (LWP 8176)]
[Thread 0xa00fdb40 (LWP 8176) exited]
[Thread 0x81fb0b40 (LWP 8175) exited]
[Thread 0xa08feb40 (LWP 7210) exited]
[New Thread 0xa00fdb40 (LWP 8190)]
[New Thread 0xa08feb40 (LWP 8191)]
[Thread 0x85affb40 (LWP 8167) exited]
NOTE: child process received `Goodbye', closing down
[New Thread 0x85affb40 (LWP 8614)]
[Thread 0x85affb40 (LWP 8614) exited]
[New Thread 0x85affb40 (LWP 8618)]
[Thread 0x85affb40 (LWP 8618) exited]
[New Thread 0x85affb40 (LWP 8619)]
[Thread 0x85affb40 (LWP 8619) exited]
[Thread 0x90efeb40 (LWP 6949) exited]
[Thread 0xa00fdb40 (LWP 8190) exited]
[New Thread 0xa00fdb40 (LWP 8621)]
[New Thread 0x90efeb40 (LWP 8622)]
[New Thread 0x85affb40 (LWP 8623)]
[New Thread 0x81fb0b40 (LWP 8624)]
[New Thread 0x6faffb40 (LWP 8626)]
[Thread 0x6faffb40 (LWP 8626) exited]
[New Thread 0x699ffb40 (LWP 8627)]
[Thread 0x699ffb40 (LWP 8627) exited]
[Thread 0x916ffb40 (LWP 8112) exited]
[Thread 0x90efeb40 (LWP 8622) exited]
[Thread 0x81fb0b40 (LWP 8624) exited]
[New Thread 0x81fb0b40 (LWP 8629)]
[Thread 0x81fb0b40 (LWP 8629) exited]
[New Thread 0x81fb0b40 (LWP 8634)]
[New Thread 0x90efeb40 (LWP 8635)]
[Thread 0x90efeb40 (LWP 8635) exited]
[New Thread 0x90efeb40 (LWP 8643)]
[New Thread 0x916ffb40 (LWP 8662)]

(firefox:6918): libnotify-WARNING **: Failed to connect to proxy
[New Thread 0x699ffb40 (LWP 8663)]
[Thread 0x699ffb40 (LWP 8663) exited]
[Thread 0xa00fdb40 (LWP 8621) exited]
[New Thread 0xa00fdb40 (LWP 8702)]
[New Thread 0x699ffb40 (LWP 8703)]
[Thread 0x699ffb40 (LWP 8703) exited]
NOTE: child process received `Goodbye', closing down
[Thread 0xa00fdb40 (LWP 8702) exited]
[New Thread 0xa00fdb40 (LWP 8737)]
[New Thread 0x699ffb40 (LWP 8738)]
[Thread 0x699ffb40 (LWP 8738) exited]
[New Thread 0x699ffb40 (LWP 8739)]
[Thread 0x699ffb40 (LWP 8739) exited]
[Thread 0xa00fdb40 (LWP 8737) exited]
[Thread 0x81fb0b40 (LWP 8634) exited]
[New Thread 0x81fb0b40 (LWP 8787)]
[Thread 0x81fb0b40 (LWP 8787) exited]
[New Thread 0x81fb0b40 (LWP 8790)]
[New Thread 0xa00fdb40 (LWP 8791)]
[Thread 0x81fb0b40 (LWP 8790) exited]
[New Thread 0x81fb0b40 (LWP 8792)]
[New Thread 0x699ffb40 (LWP 8793)]
[New Thread 0x68fffb40 (LWP 8807)]
[Thread 0x68fffb40 (LWP 8807) exited]
[Thread 0x699ffb40 (LWP 8793) exited]
NOTE: child process received `Goodbye', closing down
[New Thread 0x68fffb40 (LWP 8815)]
[New Thread 0x699ffb40 (LWP 8816)]
NOTE: child process received `Goodbye', closing down

Program received signal SIGPIPE, Broken pipe.
[Switching to Thread 0xb26ffb40 (LWP 6924)]
0xb7fdd424 in __kernel_vsyscall ()
(gdb)

The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
Note: This will make you lose all the Extensions, open Web sites and preferences.

To reset Firefox, perform the following steps:

Go to Firefox > help > troubleshooting information.
Click on the button 'Reset Firefox'.
Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
Firefox opens with all the default settings applied.

Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

This solve your problems? Please report to us!

Unable to connect to the Cisco VPN you use native client: El Capitan

I'm unable to connect to the Cisco VPN using native client server Cisco OSX via IPSec. Before the upgrade for connections VPN El Capitan has worked without any problems. VPN uses the shared secret of group. It seems, I get the error "raccoon [2580] ': could not send message vpn_control: Broken pipe ' during the connection."

When I upgraded to El Capitan, VPN connection has stopped working. I tried to do the following:

* connect using the old work VPN connection: without success

Config: Hand [server address, account name],

AUTH settings [shared secret, the Group name].

Advanced [mode to use the passive FTP = TRUE]

errors:

"authd [124]: copy_rights: _server_authorize failed.

"raccoon [2580]: could not send message vpn_control: Broken pipe"

...

* Add new VPN connection using L2TP over IPSec: without success

Config: Hand [server address, account name],

Authentication settings [user authentication: password, identification of the Machine: Shared Secret].

Advanced [send all traffic on the VPN = TRUE]

errsors:

"pppd [2616]: password not found in the system keychain.

"authd [124]: copy_rights: _server_authorize failed.

...

* Add new connection using Cisco via IPSec VPN: without success

Main config: [server address, account name].

AUTH settings [shared secret, the Group name].

Advanced [mode to use the passive FTP = TRUE]

errors:

"authd [124]: copy_rights: _server_authorize failed.

"raccoon [2580]: could not send message vpn_control: Broken pipe"

VPN server is high and does not work and accepts connections, this problem is entirely on the client side.

I. Journal of Console app existing/Legacy VPN connection:

26/03/16 10:24:01, 000 syslogd [40]: sender ASL statistics

26/03/16 10:24:01, nesessionmanager 311 [2112]: NESMLegacySession [VPN_CONN_NAME$: B7816CCC-2D2C-4D6D - 83 D 9-B2C8B6EB8589]: received an order to start SystemUIServer [2346]

26/03/16 10:24:01, nesessionmanager 311 [2112]: NESMLegacySession [VPN_CONN_NAME$: B7816CCC-2D2C-4D6D - 83 D 9-B2C8B6EB8589]: changed to connecting status

26/03/16 10:24:01, nesessionmanager 313 [2112]: IPSec to connect to the server $VPN_SERVER_IP

26/03/16 10:24:01, 316 nesessionmanager [2112]: phase 1 of the IPSec from.

26/03/16 10:24:01, racoon 338 [2580]: agreed to the takeover of vpn connection.

26/03/16 10:24:01, racoon 338 [2580]: agreed to the takeover of vpn connection.

26/03/16 10:24:01, racoon 339 [2580]: IPSec to connect to the server $VPN_SERVER_IP

26/03/16 10:24:01, racoon 339 [2580]: IPSec to connect to the server $VPN_SERVER_IP

26/03/16 10:24:01, racoon 339 [2580]: connection.

26/03/16 10:24:01, racoon 339 [2580]: IPSec Phase 1 started (initiated by me).

26/03/16 10:24:01, racoon 339 [2580]: IPSec Phase 1 started (initiated by me).

26/03/16 10:24:01, racoon 349 [2580]: IKE Packet: forward the success. (Initiator, Aggressive Mode 1 message).

26/03/16 10:24:01, racoon 350 [2580]: > > > > > status of phase change = Phase 1 began by us

26/03/16 10:24:01, racoon 350 [2580]: > > > > > status of phase change = Phase 1 began by us

26/03/16 10:24:01, racoon 381 [2580]: no message must be encrypted, 0x14a1, side 0 status

26/03/16 10:24:01, racoon 381 [2580]: no message must be encrypted, 0x14a1, side 0 status

26/03/16 10:24:01, 381 nesessionmanager [2112]: Controller IPSec: IKE FAILED. phase 2, assert 0

26/03/16 10:24:01, 381 nesessionmanager [2112]: Controller IPSec: retry the aggressive mode IPSec with DH group 2

26/03/16 10:24:01, nesessionmanager 404 [2112]: phase 1 of the IPSec from.

26/03/16 10:24:01, racoon 404 [2580]: IPSec to connect to the server $VPN_SERVER_IP

26/03/16 10:24:01, racoon 404 [2580]: IPSec to connect to the server $VPN_SERVER_IP

26/03/16 10:24:01, racoon 405 [2580]: connection.

26/03/16 10:24:01, racoon 405 [2580]: IPSec Phase 1 started (initiated by me).

26/03/16 10:24:01, racoon 405 [2580]: IPSec Phase 1 started (initiated by me).

26/03/16 10:24:01, 407 raccoon [2580]: IKE Packet: forward the success. (Initiator, Aggressive Mode 1 message).

26/03/16 10:24:01, 407 raccoon [2580]: > > > > > status of phase change = Phase 1 began by us

26/03/16 10:24:01, 407 raccoon [2580]: > > > > > status of phase change = Phase 1 began by us

26/03/16 10:24:01, racoon 436 [2580]: port 62465 anticipated, but 0

26/03/16 10:24:01, racoon 436 [2580]: port 62465 anticipated, but 0

26/03/16 10:24:01, 463 raccoon [2580]: IKEv1 Phase 1 AUTH: success. (Initiator, aggressive-Mode Message 2).

26/03/16 10:24:01, 463 raccoon [2580]: > > > > > status of phase change = Phase 1 began with a peer

26/03/16 10:24:01, 463 raccoon [2580]: > > > > > status of phase change = Phase 1 began with a peer

26/03/16 10:24:01, 463 raccoon [2580]: IKE Packet: receive a success. (Initiator, Aggressive Mode 2 message).

26/03/16 10:24:01, 463 raccoon [2580]: initiating IKEv1 Phase 1: success. (Initiator, aggressive Mode).

26/03/16 10:24:01, 463 raccoon [2580]: IKE Packet: forward the success. (Initiator, Aggressive Mode 3 message).

26/03/16 10:24:01, 463 raccoon [2580]: IPSec Phase 1 established (initiated by me).

26/03/16 10:24:01, 463 raccoon [2580]: IPSec Phase 1 established (initiated by me).

26/03/16 10:24:01, 484 raccoon [2580]: IPSec Extended requested authentication.

26/03/16 10:24:01, 484 raccoon [2580]: IPSec Extended requested authentication.

26/03/16 10:24:01, nesessionmanager 485 [2112]: IPSec asking extended authentication.

[26/03/16 10:24:01, 494 nesessionmanager [2112]: NESMLegacySession[$VPN-CONN-NAME:B7816CCC-2D2C-4D6D-83D9-B2C8B6EB8589]: status changed by disconnecting

26/03/16 10:24:01, 495 nesessionmanager [2112]: IPSec disconnection from the server $VPN_SERVER_IP

26/03/16 10:24:01, racoon 495 [2580]: IPSec disconnection from the server $VPN_SERVER_IP

26/03/16 10:24:01, racoon 495 [2580]: IPSec disconnection from the server $VPN_SERVER_IP

26/03/16 10:24:01, racoon 495 [2580]: IKE Packet: forward the success. (Information message).

26/03/16 10:24:01, racoon 495 [2580]: IKEv1-Information Notice: pass success. (Delete the ISAKMP Security Association).

26/03/16 10:24:01, racoon 495 [2580]: could not send message vpn_control: Broken pipe

26/03/16 10:24:01, racoon 495 [2580]: could not send message vpn_control: Broken pipe

[26/03/16 10:24:01, 496 nesessionmanager [2112]: NESMLegacySession[$VPN-CONN-NAME:B7816CCC-2D2C-4D6D-83D9-B2C8B6EB8589]: status changed to offline, last stop reason no

26/03/16 10:24:01, racoon 496 [2580]: glob found no match for the path "/ var/run/racoon/*.conf".

26/03/16 10:24:01, racoon 496 [2580]: glob found no match for the path "/ var/run/racoon/*.conf".

26/03/16 10:24:01, racoon 496 [2580]: IPSec disconnection from the server $VPN_SERVER_IP

26/03/16 10:24:01, racoon 496 [2580]: IPSec disconnection from the server $VPN_SERVER_IP

$VPN_SERVER_IP

II. new VPN connection using L2TP over IPSec Console app log:

26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextSetFillColorWithColor: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextSetStrokeColorWithColor: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextGetCompositeOperation: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextSetCompositeOperation: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextFillRects: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextSetCompositeOperation: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextClipToRect: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextGetShouldSmoothFonts: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextGetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextGetFontAntialiasingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetDefaultUserSpaceToDeviceSpaceTransform: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextConcatCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextDrawImages: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetShouldSmoothFonts: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetDefaultUserSpaceToDeviceSpaceTransform: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, com.apple.preference.network.remoteservice [2539 295]: CGContextConcatCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextDrawImages: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetDefaultUserSpaceToDeviceSpaceTransform: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, com.apple.preference.network.remoteservice [2539 295]: CGContextConcatCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextDrawImages: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:28, [2539 339] com.apple.preference.network.remoteservice: error in CoreDragRemoveTrackingHandler:-1856

26/03/16 10:37:28, [2539 339] com.apple.preference.network.remoteservice: error in CoreDragRemoveReceiveHandler:-1856

26/03/16 10:37:28, com.apple.xpc.launchd [1 393]: (com.apple.SystemUIServer.agent [2346]) Service was released due to the signal: Broken pipe: 13

26/03/16 10:37:28, Spotlight 461 [459]: spot: logging agent

26/03/16 10:37:28, [2539 487] com.apple.preference.network.remoteservice: service - area of the one error ERROR = NEConfigurationErrorDomain Code = 9 "configuration is unchanged" UserInfo = {NSLocalizedDescription = configuration is unchanged}

26/03/16 10:37:28, [2539 487] com.apple.preference.network.remoteservice: service - area of the one error ERROR = NEConfigurationErrorDomain Code = 9 "configuration is unchanged" UserInfo = {NSLocalizedDescription = configuration is unchanged}

26/03/16 10:37:28, nesessionmanager 519 [2112]: NESMLegacySession [VPN_CONN_NAME$: 04c 10954-16 b 2 - 40BB - B3F1 - 9288F968029E]: received an order to start com.apple.preference.network.re [2539]

26/03/16 10:37:28, nesessionmanager 519 [2112]: NESMLegacySession [VPN_CONN_NAME$: 04c 10954-16 b 2 - 40BB - B3F1 - 9288F968029E]: changed to connecting status

26/03/16 10:37:28, com.apple.SecurityServer [75 536]: rules of problem opening the file "/ etc/authorization ': no such file or directory

26/03/16 10:37:28, com.apple.SecurityServer [75 536]: sandbox has denied authorizing the right "system.keychain.modify" customer "/ usr/libexec/nehelper" [184]

26/03/16 10:37:28, 536 pppd [2616]: NetworkExtension is the controller

26/03/16 10:37:28, 538 pppd [2616]: NetworkExtension is the controller

26/03/16 10:37:28, nehelper 540 [184]: 10954-16 b 2 - 40BB - B3F1 04c - 9288F968029E: cannot copy content, returned SecKeychainItemCopyContent user interaction is not allowed.

26/03/16 10:37:28, nehelper 540 [184]: 10954-16 b 2 - 40BB - B3F1 04c - 9288F968029E: SecKeychainItemFreeContent returned the user interaction is not allowed.

26/03/16 10:37:28, 570 pppd [2616]: password not found in the system keychain

26/03/16 10:37:28, 572 pppd [2616]: publish_entry SCDSet() failed: success!

26/03/16 10:37:28, 573 pppd [2616]: publish_entry SCDSet() failed: success!

26/03/16 10:37:28, 573 pppd [2616]: pppd 2.4.2 (Apple version 809.40.5) started by $VPN_SERVER_USER, uid 501

26/03/16 10:37:28, SystemUIServer 620 [2615]: [BluetoothHIDDeviceController] EventServiceConnectedCallback

26/03/16 10:37:28, SystemUIServer 620 [2615]: [BluetoothHIDDeviceController] EventServiceDisconnectedCallback

26/03/16 10:37:28, authd 720 [124]: copy_rights: _server_authorize failed

26/03/16 10:37:28, sandboxd 748 [120]: nehelper (184) ([184]) refuse the authorization-right-get system.keychain.modify

III. New connection of Cisco VPN through IPSec Console app log:

26/03/16 10:18:26, 917 WindowServer [172]: _CGXRemoveWindowFromWindowMovementGroup: 0x10d of window is not attached to the window 0x10f

26/03/16 10:19:43, 975 WindowServer [172]: _CGXRemoveWindowFromWindowMovementGroup: 0x10d of window is not attached to the window 0x10f

[26/03/16 10:19:56 nesessionmanager 265 [2112]: NESMLegacySession[$VPN-CONN-NAME:72874CC0-2A89-4B61-80F1-9BB4F3EA953B]: received an order to start SystemUIServer [2346]

[26/03/16 10:19:56 nesessionmanager 265 [2112]: NESMLegacySession[$VPN-CONN-NAME:72874CC0-2A89-4B61-80F1-9BB4F3EA953B]: changed to connecting status

26/03/16 10:19:56, nesessionmanager 267 [2112]: IPSec to connect to the server $VPN_SERVER_IP

26/03/16 10:19:56, nesessionmanager 270 [2112]: phase 1 of the IPSec from.

26/03/16 10:19:56, authd 284 [124]: copy_rights: _server_authorize failed

26/03/16 10:19:56, 295 raccoon [2576]: agreed to the takeover of vpn connection.

26/03/16 10:19:56, 295 raccoon [2576]: agreed to the takeover of vpn connection.

26/03/16 10:19:56, 295 raccoon [2576]: IPSec to connect to the server $VPN_SERVER_IP

26/03/16 10:19:56, 295 raccoon [2576]: IPSec to connect to the server $VPN_SERVER_IP

26/03/16 10:19:56, racoon 296 [2576]: connection.

26/03/16 10:19:56, racoon 296 [2576]: IPSec Phase 1 started (initiated by me).

26/03/16 10:19:56, racoon 296 [2576]: IPSec Phase 1 started (initiated by me).

26/03/16 10:19:56, racoon 308 [2576]: IKE Packet: forward the success. (Initiator, Aggressive Mode 1 message).

26/03/16 10:19:56, racoon 308 [2576]: > > > > > status of phase change = Phase 1 began by us

26/03/16 10:19:56, racoon 308 [2576]: > > > > > status of phase change = Phase 1 began by us

26/03/16 10:19:56, 352 raccoon [2576]: no message must be encrypted, 0x14a1, side 0 status

26/03/16 10:19:56, 352 raccoon [2576]: no message must be encrypted, 0x14a1, side 0 status

26/03/16 10:19:56, nesessionmanager 352 [2112]: Controller IPSec: IKE FAILED. phase 2, assert 0

26/03/16 10:19:56, nesessionmanager 353 [2112]: Controller IPSec: retry the aggressive mode IPSec with DH group 2

26/03/16 10:19:56, nesessionmanager 373 [2112]: phase 1 of the IPSec from.

26/03/16 10:19:56, 374 raccoon [2576]: IPSec to connect to the server $VPN_SERVER_IP

26/03/16 10:19:56, 374 raccoon [2576]: IPSec to connect to the server $VPN_SERVER_IP

26/03/16 10:19:56, 374 raccoon [2576]: connection.

26/03/16 10:19:56, 374 raccoon [2576]: IPSec Phase 1 started (initiated by me).

26/03/16 10:19:56, 374 raccoon [2576]: IPSec Phase 1 started (initiated by me).

26/03/16 10:19:56, racoon 376 [2576]: IKE Packet: forward the success. (Initiator, Aggressive Mode 1 message).

26/03/16 10:19:56, racoon 376 [2576]: > > > > > status of phase change = Phase 1 began by us

26/03/16 10:19:56, racoon 376 [2576]: > > > > > status of phase change = Phase 1 began by us

26/03/16 10:19:56, racoon 404 [2576]: port 62465 anticipated, but 0

26/03/16 10:19:56, racoon 404 [2576]: port 62465 anticipated, but 0

26/03/16 10:19:56, racoon 432 [2576]: IKEv1 Phase 1 AUTH: success. (Initiator, aggressive-Mode Message 2).

26/03/16 10:19:56, racoon 432 [2576]: > > > > > status of phase change = Phase 1 began with a peer

26/03/16 10:19:56, racoon 432 [2576]: > > > > > status of phase change = Phase 1 began with a peer

26/03/16 10:19:56, racoon 432 [2576]: IKE Packet: receive a success. (Initiator, Aggressive Mode 2 message).

26/03/16 10:19:56, racoon 432 [2576]: initiating IKEv1 Phase 1: success. (Initiator, aggressive Mode).

26/03/16 10:19:56, racoon 432 [2576]: IKE Packet: forward the success. (Initiator, Aggressive Mode 3 message).

26/03/16 10:19:56, 433 raccoon [2576]: IPSec Phase 1 established (initiated by me).

26/03/16 10:19:56, 433 raccoon [2576]: IPSec Phase 1 established (initiated by me).

26/03/16 10:19:56, racoon 453 [2576]: IPSec Extended requested authentication.

26/03/16 10:19:56, racoon 453 [2576]: IPSec Extended requested authentication.

26/03/16 10:19:56, 454 nesessionmanager [2112]: IPSec asking extended authentication.

[26/03/16 10:19:56, nesessionmanager 464 [2112]: NESMLegacySession[$VPN-CONN-NAME:72874CC0-2A89-4B61-80F1-9BB4F3EA953B]: status changed by disconnecting

26/03/16 10:19:56, nesessionmanager 464 [2112]: IPSec disconnection from the server $VPN_SERVER_IP

26/03/16 10:19:56, racoon 465 [2576]: IPSec disconnection from the server $VPN_SERVER_IP

26/03/16 10:19:56, racoon 465 [2576]: IPSec disconnection from the server $VPN_SERVER_IP

26/03/16 10:19:56, racoon 465 [2576]: IKE Packet: forward the success. (Information message).

26/03/16 10:19:56, racoon 465 [2576]: IKEv1-Information Notice: pass success. (Delete the ISAKMP Security Association).

26/03/16 10:19:56, racoon 465 [2576]: could not send message vpn_control: Broken pipe

26/03/16 10:19:56, racoon 465 [2576]: could not send message vpn_control: Broken pipe

[26/03/16 10:19:56, nesessionmanager 465 [2112]: NESMLegacySession[$VPN-CONN-NAME:72874CC0-2A89-4B61-80F1-9BB4F3EA953B]: status changed to offline, last stop reason no

26/03/16 10:19:56, 466 raccoon [2576]: glob found no match for the path "/ var/run/racoon/*.conf".

26/03/16 10:19:56, 466 raccoon [2576]: glob found no match for the path "/ var/run/racoon/*.conf".

26/03/16 10:19:56, 466 raccoon [2576]: IPSec disconnection from the server $VPN_SERVER_IP

26/03/16 10:19:56, 466 raccoon [2576]: IPSec disconnection from the server $VPN_SERVER_IP

It seems that I solved the problem, but I'm not sure it helped.

After restart of the operating system, the two connections: old and new Cisco via IPSec connection, began to work.

meaning: broken pipe

Similar Questions

Maybe you are looking for