Measure the height of liquid without contact

Similar Questions

• How can I change the height of text without converting them vectorised text?

  I work in a sign company and often need to put in place the text in a specific size. When the text is CAPS, it isn't so bad, but in the case of title case, it can be a pain...

  For example, if I need letters 2 "high, it would generally be compared to the uppercase version of the first letter of the word (no matter the ascending and descending).

  A few times I need to make several at once, so change them individually are very tedious when I cPV every word to outlines, then aletters of each word to make up for the ascendants and descendants of aresurrection.

  I wonder if there is a faster way to do this without convert curves?  In addition, I notice that when I change the size of the font (in the character palette) to 2 ", for example, when describing the text is actually smaller.

  signguy (There),

  You can:

  (1) tick Edit > preferences > General > use overview of limits;

  (2) select the Type and the effect > path > describe the object.

  Which will reduce the Bounding Box to the real limits of the letters and keep the editable Type.

  Don't forget to uncheck the Edit > Preferences > General > use limits Preview until you get a reverse problem.

• Rectangle problems can not see the height of cel

  Can someone help me?

  I use the celheight to measure the height of a text?

  For some reason he disappeared. I would add a picture for what I want to say that I have lost.

  
  

  the guides are lit? (View > Smart Guides)

• Get the height and width of the jpg or png of bitmap without loading the file

  Is there a way to get the height and width of a bitmap, such as jpg or png file, without loading the complete file of the image first.

  Thank you!

  Hi JamesColeman,

  While you can't get the width and height of the jpg or png without access to the file, you can get this information without access to the entire file. A PNG for example (in raw hex) indicates the width and height of the image it contains. The first 21 bytes contain the file-specific information such as name, etc, but just after the IHDR header 4 bytes indicate the width and the other 4 bytes indicate height. If enough for you to read the first 29 bytes of the PNG to be able to get its dimensions, which, while it still requires access to the file is much easier.

  I have the code to read this information here and if you want to learn more about the specifications you can find information on this site.

  Best wishes

  André

• You can timestretch without changing the height in first?

  You can timestretch without changing the height in first?

  anyone?

  You can change the speed/duration without changing the pitch by ticking the 'Preserve Audio Pitch' to clip speed / duration dialog.

  If you use time-remapping (which is a fixed effect), it is n/a, because the time remapping effect only affects the video track.

  Adobe Premiere Pro - maintenance Audio Pitch (VOXLAB tutorial) - YouTube

• contact form, you cannot change the height

  I have a contact form that got sort of a height more 21 000 pixels. The height box is greyed out no matter how to select the contact form, so I can't change it in the box, and there is no way to recover the bottom of the form and move it to the top. Any help much appreciated.

  Found the answer here: Re: How do I resize a form

• How to design a report that all display the name of the account without Contacts?

  What is the best/better way to create a report that all display the name of the account without contacts?
  
  Thank you!

  Tim,

  Create:

  Report 1 - account ID, account name, name of the Contact - save it in the shared company folder
  Report 2 - ID account, the account name - it save anywhere

  Report 1 will give you a list of accounts with contacts (the integrated join should remove accounts with no contacts)
  Report 2 will give you a list of accounts
  Add a filter on the report ID 2 account - advanced - filter based on the results of another report.
  Find your report 1 and account ID does not match the account ID

  Report 2 will give you now all accounts - accounts of Report 1 is with no contact.

  see you soon
  Alex

• Make the iframe automatically adjust the height according to the content without using the scroll bar?

  Hello

  I develop the site (www.meninasreais.com.br) and have a doubt. I created the basic html - menu, header - in Adobe Muse. I'm trying to insert an iframe that automatically adjust the height according to the content of the blog.

  I tried with different codes, the framework is installed on the same domain as the site and none of them worked. What can I do it wrong? Thank you.

  The code that was inserted below:

  < script language='JavaScript'>

  <!--

  Function autoResize (id) {}

  var newheight;

  var NewWidth;

  if (document.getElementById) {}

  newHeight = document.getElementById (id). contentWindow.document. body.scrollHeight;

  NewWidth = document.getElementById (id). contentWindow.document. body.scrollWidth;

  }

  document.getElementById (id) .height = (newheight) + 'px';

  document.getElementById (id) .width = (newwidth) + 'px';

  }

  ->

  < /script >

  < IFRAME SRC='www.meninasreais.com.br' width='600px' height='200px' id='iframe1' marginheight='0' frameborder='0'onLoad="autoResize ("iframe1");" > < / iframe >

  Hi, I successfully did this for my blogging engine.

  I use jquery.autoheight.js

  In the property of my page:

  In my html box:

  This work in Adobe muse. My iframe it set itself with the content of my blog.

  Example: http://www.solutionsip.ca/blog.html

• Menus and toolbars are 3 times the height they were. Re-install is not change things, nor is "default".

  Unexpectedly, the toolbars became three times the height. At the same time came in the drop-down menus of the same question.
  After searching for a "setting" and finding nothing, I uninstalled and then reinstalled two times without resolution. Reset default "" also failed to restore normality.

  The text in the tabs and toolbars is a normal height, as it is in the menus, but try to select from a menu makes empty options.

  At this point, I wouldn't worry Crash Reports.

  It seems to me as a matter of Windows theme or it is related to video drivers, and troubleshooting information you provided says 'Try to update your driver graphic version 182.65 or later.'

  This should be your first step.

• Navigation of Firefox 13.0.1 bar changes the height when you click tabs

  Only happened today, no changes made to the system.
  When I click on a tab, the height of the Navigation toolbar icons icon decreases to a square for half a second and then returns to the height the deeper (rectangle). What makes the page below the menu jump bar. Rather distracting.
  Hide the Navigation toolbar obviously solves the problem, but is not practical for obvious reasons.
  The people of ideas; someone at - he heard of this before?
  Thanks in advance,
  Mike.

  If you close Firefox, and then start Firefox in Mode without failure, in the problem? To start Safe Mode, go to help > restart with disabled modules.

  If the problem does not occur in Mode safe, then you can disable your extensions one by one until you find out that one is at the origin of the problem. See Troubleshooting extensions and themes and problems of hardware acceleration to resolve common Firefox problems.

• Can I use Apple pay even though my card is not without contact?

  So I have a Apple Watch and an iPhone 6, compatible both for Apple payroll. I was wondering, even if my card is not Apple contactless pay will work in the stores where I hold my watch in front of the card reader and it pays wireless? My phone and watch both I will add my card to pay Apple, and if I double tap on the back on my Apple Watch button it brings my card and it says to "hold close reader to pay." I just always thought that since my card is not without contact it will not work with Apple pay...

  Thank you!

  Hi Ben

  Yes, you can use Apple pay / it will work.

• Use the calendar and reminders without iCloud

  I have the calendar, reminders, and Contacts on my MBP on synchronize with iCloud.  I have now decided I prefer to use independently of iCloud applications, i.e. with data stored locally on my computer and not sent to iCloud.  The problem is when I disable each iCloud in the system preferences application, all my events etc. disappear applications, only to reappear when I check the new box for iCloud syncronisation.  I even tried the backup of the archives before "unsyncing" and then restoring from archives of said, but the archives appear to be blank without any event etc..

  Any ideas?  How can I get data from iCloud on my computer and then stop synchronizing my computer with iCloud?

  Reminders - in the application of reminders, drag the item in the section on my Mac. To move several items at once, hold down the SHIFT key after selecting the first reminder.

  Contacts and calendar - file/export and choose your desktop. Turn off sync iCloud. Then file/import the file appropriate to your computer.

• at the same time production and measuring the pulse

  Hello everyone,

  I'm generates a pulse for specific time. Now, I want to measure within the same daq card. I've done Vi for him but he has an error. I have USB daq-6343. I enclose my Vi here.

  The problem is I am able to get pulses generated at PIN 6 PFI but reading Vi watch time-out error.

  I plugged the wire between PFI 1 pin and PFI 6 pins on the DAQ card.

  So please suggest me what to do to eliminate this error.

  Thanks & best regards,

  I just looked at your original vi, I had looked only at the most distant (corrected) a previously.  I don't see a good reason to read timeout error you have immediately.  Record of an error timeout on your attempt reading suggests that the code was executed without error so far, including the beginning of the generation of pulses.  That would leave wondering on physical cable connection or possibly some undesirable side effects caused by your cleanup code when you three States a PFI lines.

  The other issue was my suggestion to leave DAQmx Timing.vi outside of the configuration string entirely for cases like this where you only want to build a single pulse.  To be honest, it's a habit & practice I adopted a long time ago.  I thought one of the reasons was that the finished pulse trains required a minimum of 2 samples.  A bit of test code showed me that it isn't true, if my memory tells me there was a time when it * used * to be true.  I don't remember if I have errors or if the task has chosen to generate 2 pulses with just a warning, or something.  I just remember that, while he was working on a module that was supposed to be able to produce any number of pulses from 1 to N, I found that I wasn't actually able to support the case of 1 pulse by asking just 1 sample over sample mode.

  * Anyway *, the other reason to avoid sampling over for a single pulse mode is that in the past, this would consume actually 2 counters on DAQ cards.  Generated the pulse (s) while the other was a help that triggered the first to control the number of generated pulses.  It was unnecessary as you could * also * generate a single pulse leaving the DAQmx Timing.vi out of the config, a method that used only 1 meter.

  X-series cards (like yours) don't consume over 2 programmable counters of the user to generate finite pulse trains, so the lesson I learned a long time ago and was trying to convey is perhaps not so important in your case.  I recommend it even if you know that you will always generate a single pulse, simply because he considered the standard way to generate a single pulse (as seen in examples of navigation).

  -Kevin P

• Measure the current and voltage using DMM sharing a port

  I want to measure pressure several times on a pcb, where I connect the ports of digital multimeters to the card using simple cards. Switching between the different voltages is done using simple. If the black port of DMM (the second from the top photo) is connected to the Earth to give the measure correct volt.

  

  And then I want to measure current through different lines. The problem is here. Given that two measurement types share a port, how do I get the correct voltage and current measurement? The second port of top would be grounded, so I can't use the method of measuring the voltage across the line through a resistance with a known value, since then the second port must not be connected to the ground. How can I use the current state of the DMM measurement? How measure current? Are there examples of this? Tried looking through manuals, but could not find the good starting points.

  

  so I can't use the method of measuring the voltage across the line through a resistance with a known value, since then the second port must not be connected to the ground.

  On all of my games to test I have to mux my land of the signal along with the salvation of my signals.

  All my mux test sets are set up for the topology 2-wire because there is no other way to do it without the weak side of switch also.

• Measuring the pulse

  Hai all the...

  I'm using the port Usb-6009 meter to measure the engine for each 0.1 s and save it in the file lvm. Aquistion and and logging of data at the initial stage say 10 minutes generated pulse is acurate and data is stored for each 0.1 s, after the 10th minute acquistion speed and recording speed goes slow and instead of data for each 0.1 s acquisition it measures for 0.12,0.14,0.16, and... 0.2, 0.3 S... and stores. For this reason, I'm bored n number of impulses and I could not provide appropriate time resolution.

  After analysis, I found that the acquisition depends on material used and the system used.

  My System Configuration is

  Intel core 2 Duo processor

  2.67 GHz, 1 GB of Ram

  anyone can suggest a solution for the above problem, is there another way to measure signals without loss or delay. ?

  Check the attachment. You can get an idea.