Use the calendar and reminders without iCloud

Similar Questions

• Date show invites by using the calendar and presentation Variables

  Hi all
  
  That's what it takes...
  
  I need to create a two prompts (from_date and to_date) on a date column so that I can filter the data by using a condition. This is how I do
  
  I created two guests (edited the formula) and passing values to two variables var_from and var_to presentation. In the report, I limit the query on assistance between motor coaches for both the presentation variable. Everything works fine but the problem is I need display var_from and var_to in my report also.
  
  I'm referencing variables like ' @{var_from}' and ' @{var_to}' but I get two columns as white. I don't really know why I get empty values for these two columns only when I am able to filter my report with success on the basis of the date values in the guests...
  
  Just to metion... in my database, I have values in m/d/yyyy format only. So I am able to use the calendar successfully
  
  Any help on this would be much appreciated...
  
  
  Thank you
  -Ronny

  Ronny,
  Drafts of answers do you see? ID wait, but on the dashboard when you set filters, you should see values that crosses?
  You can extend the syntax of the variable closely and provide a default value, so when you work in the answers you can see what it looks like,

  something like @{var_from} {January 1, 2010 ""}

  Also you can reference variables in the title, the subtitle or the narrative views if you want.

• How to clear the calendar and Contacts?

  I convey my oldest E2 to my daughter... How can I clear the calendar and contacts without synchronization?  Obviously, I don't want to do line-by-line date by date.  Is there a reset function that will drain completely?

  Thank you very much.

  A hard reset will clear the device and put it back in the condition of "out of the box.  It will clear the calendar and contacts and anything else you have installed too, so be aware.

  To perform a hard reset: (Palm Knowledgebase article #887)

  By now the power down button, press on and release the Reset button on the back and continue to press the Power button. When the gray Palm logo is displayed, you can release the Power button.

  You should now see the warning in 5 languages page. Press the direction upward on the 5-way keypad to perform the task. The Palm restarts several times as it re - install the original programs and erases all data from your previous.

  WyreNut

• Can I use the dumps and CacheLoader?

  Can I use the dumps and CacheLoader without TopLink?

  Yes, here is an example of dumps...

  http://coherence.Oracle.com/display/COH34UG/sample+CacheStores

• Using the calendar without phone

  Hello world

  Anyone know if it is possible to use the Treo 650 as a PDA without tying it in a phone service?   I bought a 650 a few months ago, so I could have a phone and a coded schedule of color in the same device, but now they have changed the law in my province, except the composition in the car, and I'm learning now that the Treo 650 can support voice dialing with any bluetooth device.  I think I'll switch phones but want to continue to use the calendar in the Treo.

  Any thoughts?

  You were right.  I took out the SIM card and the calendar still works.  I'll just need to get another phone to actually using a phone.  The next time I buy a phone, I'll have to check all the functions that I consider standard features, so I don't get caught like this again...

  Thanks for the help.

• My iMac cursor is stuck in the upper left corner of the login screen and I can't move it and now I can't use my iMac. What can I do? My iMac is a 27-inch 2014 release (one thin without retina display) and uses the keyboard and wireless mouse.

  My iMac cursor is stuck in the upper left corner of the login screen and I can't move it and now I can't use my iMac. What can I do? My iMac is a 27-inch 2014 release (one thin without retina display) and uses the keyboard and wireless mouse. It runs OSX Mountain Lion (not sure which version) and is a model 27 inches.

  have you tried to change the batteries in the mouse?

• I can't open the InDesign program, which I have been using now for over 18 months...  He starts to open then crashes, I uninstalled/re-installed the program and always without success.

  I can't open the InDesign program, which I have been using now for over 18 months...  He starts to open then crashes, I uninstalled/re-installed the program and always without success.

  Hi all

  A hotfix is now available for licensing.

  Please click on the link below and follow the steps.

  Easy steps to follow and should help you to solve the problem.

  https://helpx.Adobe.com/InDesign/KB/crash_on_launch.html

  Thanks and greetings

  Kaushik Afonso

• Are the Photos and videos uploaded (iCloud Photo Sharing) equal to the (ios iphoto reviewed)? If not, what is the new equal to that? If so, can I organize the layout as I wish? can I convert (iphoto ios log backup) to the file (iCloud Photo Sharing)?

  I always use the ios 7 because I like my reviews of iphoto, ios 8 and after don't support is not iphoto, I intend to upgrade to the latest version of ios. so my question is:

  Are the Photos and videos uploaded (iCloud Photo Sharing) equal to the (ios iphoto reviewed)?

  -If so, I can arrange the provision in the way I want? What happens if you want to convert my old (iphoto ios log backup) to import (iCloud Photo Sharing) that it is?

  -If not, what is the new equal to that with the possibility of transferring these journals?

  Thank you

  No they are not really the same thing and you can't convert one to the other. When / if you update, you will simply lose your logs. You cannot influence other available photos of the order appear in

• automatic generation of the files using the time and date system

  Hi guys,.

  IAM trying to build a path for the creation of files automatically using system date and time. I'm running into errors with regard to the special characters in the file name. I'm trying to parse the string to get the date and time without the ' / 'and':' but have failed. is there a better way to do it? Help, please! I try to avoid a dialog box for the user to enter a file name.

  Thank you!

  V

  Here's a little experiment... may help build the %d (day) (month) of %m %(year) type stuff.

• When using the merge and when to use updated

  Hi friends,

  Given the best performance... purpose of this discussion is when we should use statement UPDATE and when we should use MERGE statement in oracle update of thousands of records.

  Kindly Guide.

  Kind regards

  Himanshu

  Hello

  Looking for a couple to a few rules that you can use to decide whether to use the MERGE or UPDATE, without actually testing two meanings?

  If so, use MERGE when

  (1) (sometimes) need to add new lines

  (2) it is simpler.  This includes special cases

  (2A) an UPDATE statement uses a subquery in the SET clause and then (mostly) repeats the same subquery in the WHERE clause

  (2B) you want to use the analytical functions or CONNECT BY in a subquery

  These rules are NOT guaranteed to work in all situations.

  Kimmy says:

  Hello

  ... My requirement is only UPDATED records about 200 to 500K (NOT followed by update of insertion).

  So the rule (1) above does not apply in this case.

  What I observed in the update using a MERGE statement and UPDATE is:

  Update with the MERGER was faster however explain the bytes consumed to the query plan MERGE has been compared more update.

  Use the tool that works best for your needs.  If users are complaining that something shows more bytes used in a plan to explain, so maybe it's a reason for the UPDATE.

  Where I work, where is the fastest is usually more important.

  In addition, I want to get clearity

  1. "if I should use MERGE if I need to update recrods using the unique table" as shown below: OR update will be good to use in this case:

  MERGE INTO MKT_DATA inmkt

  C using (SELECT Customer_Code, region, State OF CUSTOMER_DATA)

  ON (inmkt. Distributor_Code = c.Customer_Code AND inmkt. DISTRIBUTOR_CODE IS NOT NULL)

  WHEN MATCHED THEN

  Updated the inmkt VALUE. Distributor_Region = c.Region,

  inmkt. C.State = Distributor_Province;

  UPDATE MKT_DATA inmkt

  SET (inmkt. Distributor_Region, inmkt. Distributor_Province) =

  (SELECT c.Region, c.State OF CUSTOMER_DATA c

  WHERE c.Customer_Code = inmkt. Distributor_Code)

  WHERE inmkt. DISTRIBUTOR_CODE IS NOT NULL;

  2 statements above are not equivalent.

  The UPDATE statement changes all the lines in the table mkt_data that have a distributor_code, this distributor_code be in the table customer_data or not.

  You want something that is equivalent to the MERGE statement, you can use:

  UPDATE MKT_DATA inmkt

  SET (inmkt. Distributor_Region, inmkt. Distributor_Province) =

  (SELECT c.Region, c.State

  OF CUSTOMER_DATA c

  WHERE c.Customer_Code = inmkt. Distributor_Code

  )

  WHERE THERE ARE

  (SELECT 1

  CUSTOMER_DATA C2

  WHERE the c2. Customer_Code = inmkt. Distributor_Code

  )

  ;

  It basically uses the same auxiliary request 2 times (article 2 (a), so I would use MERGE if these are the results I wanted.

  If you have a foreign key constraint, which ensures that each distributor_code in mkt_data will match a line in customer_data, then the 2 statements above will produce the same results.  In this case, I find the UPDATE statement simpler and probably use it rather than MERGE.

  2. to Updating huge amount of records MERGER must be used instead of update?

  I don't know of all short reign as the "use X whenever you have more than 100,000 lines".

  3. If in the update, I need to use several tables then I have to use MERGE?

  MERGE IN MKT_DATA2 t

  WITH THE HELP OF)

  SELECT DISTINCT srt. Sales_Id, tmkt. Cust_Code, srt. PRODUCT_CENTER

  OF srt, CUSTOMER_DATA c, MKT_DATA2 tmkt SALESTERR_PL

  WHERE tmkt.state_Id = 10423

  AND tmkt. Business = 'MARKETING'

  AND c.CUST_CODE = tmkt. Cust_Code

  AND c.Rollup_Code = srt. CUST_CODE

  AND srt. PRODUCT_CENTER = tmkt.PL

  ) d

  WE (t.state_Id = 10423

  AND t.BA = 'MARKETING'

  AND t.Cust_Code = d.Cust_Code

  AND t.PL = d.PRODUCT_CENTER

  AND t.Cust_Code IS NOT NULL

  )

  WHEN MATCHED THEN

  UPDATE SET t.Sales_Id = d.Sales_Id;

  UPDATE MKT_DATA2 tmkt

  SET Sales_Id = (SELECT SALES_ID OF SALESTERR_PL srt

  WHERE the srt. CUST_CODE = (SELECT ROLLUP_CODE FROM CUSTOMER_DATA c

  WHERE c.CUSTOMER_CODE = tmkt. Cust_Code)

  AND srt. PRODUCT_CENTER = tmkt.PL)

  WHERE business = 'MARKETING'

  AND state_Id = 10423;

  Once again, those who are not equivalent.  The UPDATE statement can change more lines than the MERGE statement.

  In addition, you can use the MERGE statement:

  MERGE IN MKT_DATA2 t

  WITH THE HELP OF)

  SELECT DISTINCT srt. Sales_Id, tmkt. Cust_Code, srt. PRODUCT_CENTER

  OF srt, CUSTOMER_DATA c, MKT_DATA2 tmkt SALESTERR_PL

  WHERE tmkt.state_Id = 10423

  AND tmkt. Business = 'MARKETING'

  AND c.CUST_CODE = tmkt. Cust_Code

  AND c.Rollup_Code = srt. CUST_CODE

  AND srt. PRODUCT_CENTER = tmkt.PL

  ) d

  WE (t.Cust_Code = d.Cust_Code

  AND t.PL = d.PRODUCT_CENTER

  )

  WHEN MATCHED THEN

  UPDATE SET t.Sales_Id = d.Sales_Id

  WHERE t.state_Id = 10423

  AND t.BA = 'MARKETING'

  - AND t.Cust_Code IS NOT NULL - does not need, said subquery 'c.CUST_CODE = tmkt. Cust_Code ".

  ;

  If you would care to publish the sample data, I was able to test this.

  4. when the UPDATE is preferred over the MERGER?

  In simple cases, including situations where all you need to know are on the line itself, such as:

  UPDATE emp

  SET sal = sal * 1.05

  Job WHERE NOT IN ('MANAGER', 'PRÉSIDENT')

  ;

• Tables: using the loop and delivery

  I'm not very good with tables. Here is my broken code:

  //Create array with 4 movieclips
  var invArray:Array = new Array("i_greenLine", "i_orangeDot", "i_yellowBlock", "i_brownThing");
  //repeat this code for every item (+1)
  for (i=0; i<invArray.length; i++) {
       trace(invArray[i]);
       //Outputs:
       //i_greenLine
       //i_orangeDot
       //i_yellowBlock
       //i_brownThing
       invArray[i].onPress = function() {
            trace("hit");
       };//the movieclips are not clickable.
  }
  

  Is there a way to get the clips on the stage to be clickable via a table? There are many, many clips.

  Help?

  Thank you?

  If you use strings of the instance for the table names, then you will need to use the support rating to target instances with them...

  var invArray:Array = new Array("i_greenLine", "i_orangeDot", "i_yellowBlock", "i_brownThing");
  for (i=0; i}
  
  

  An alternative would be to use only the instance names and no channels to them...

  var invArray:Array = new Array(i_greenLine, i_orangeDot, i_yellowBlock, i_brownThing);
  for (i=0; i}
  
  

  If you plan to have a large number of them, so a better approach would be to name them all with digital ending (mc0, mc1, mc2, mc3, etc..)  You can then use the notation of support without the need for table...

  for (i=0; i}
  
  

• How create/use a calendar and date through it?

  Hi all...
  
  I have two questions about the Date...
  
  1st quarter) I want to create and use the calendar shaped 10 g. How can I do it.
  
  Please tell me the steps so that i can try n successfully complete...
  
  I got to know that this java bean can be used to do this with java coding...
  
  
  Please give me the coding and the steps how to implement it in my application.
  
  juice I want to get the date on the calendar and throw it into a field when the user selects a date.
  
  Q2), I also want to know if a user tries to enter a date in a textbox control after its entry on the SD, he must raise a slash (/) and
  then after entering MY he must raise a slash automatically.
  
  is there an option in the property palette or we have code...
  
  timely help needed here...
  
  Thanks in advance...

  Hello

  I don't know if that's what you're looking for

  If I put the date Format DD/month/rrrr mast then when I enter 20janauary2009 and leave the field by pressing on the date field to enter is January 20, 2009. It is what you are looking for or you want / to appear when the user wants to enter the date.

  You can also try to divide the field date in thre keeping three fields and putting / between the two and then concatenate when you insert or ask.

• How to use the capture and the print button

  I tried to figure out how to use the capture and the "print" button, or add or what you call. I press it and the whole page of a different color changes, so I try to cut the section I want but I don't know how to send it to the printer. Can someone help me with this. I'm not at savvy with tech stuff, but when I find a recipe or something and it doesn't have an option to print a certain area, I can't understand how to use it?

  Thank you

  Andi Starbuck

  That happens to me is, I click and drag to make a rectangle of yellow selection, and as soon as I raise my finger on the mouse button, the part I've selected is captured as an image, a new tab opens and preview before printing, the image display. I can use the installation of the Page or simply print. But if I close the preview, this temporary image vanishes and I'm back on the page where I started. You see something different?

• The new buttons to switch on the calendar (and duties) tab placed on the title bar can be customized (deleted)

  shortcut keys are available for the calendar and tasks features. The buttons should be removable via customize like any other icon on the toolbar.

  No sorry I have installed lightning because I have no need of this feature.

  You could mention as before.
  Just uninstall Flash through the Add-ons Manager.
  Tools (Alt - T) - Add-ons-Extensions

• Using the MF and the "open a new tab" + sign opens a new page with a list of site visited recently, which is a very useful tool. It works fine on my two desktop computers, but

  Using the MF and the "open a new tab" + sign opens a new page with a list of site visited recently, which is a very useful tool. It works fine on my two desktop computers, but I can't it to work on the laptop.

  I downloaded "New tab Pro" on the laptop (do not even see on desktop computers so don't think about) such that she was like the real deal but nope... do not work. Running the latest version of MF, ideas on how activate it please?

  Thank you guys are going to mark as 'resolved' BTW it is no "folder on the desktop named old data from Firefox. Hmmmmmm.