measuremnt of vibration: SVT versus SVMS

Similar Questions

• Purchase / upgrade of LabVIEW with more Sound and Vibration

  Hi, supporters OR Forums,

  I'm new in LabVIEW but I'm working on a project that needs to use LabVIEW in these toolkits: DAQmx, PID and then Sound and Vibration Control.

  In order to experience on the vibrations, I need to use screws of Suite Sound and Vibration, which was not purchased in my Institute. We had the license for LabVIEW 2009 SP1. Unfortunately, I have a VI file written in LabVIEW 2010 my partner. According to the records of view VI, there is a lack of following screws:

  -SVFA Power Spectrum.vi
  -Application Directory.vi
  -SVT FFT .vi spectrum (Mag-Phase)
  -Frequency response (Mag Phase) .vi SVT
  -SVFA amplitude and Phase Real and Imaginary.vi
  -SVL get spectrum subset.vi
  -SVT UFFT58 write.vi
  -SVT UFFT58 write record 6 vi
  -SVT HFFT58 close file.vi

  I would like to confirm if these screws are supplied in the detroit and Viration Suite or / and other toolkits. If all of them can be found in the following Sound and Vibration, what I have to do is to buy the offer away from NOR, is it not? How much should I pay for this Suite.

  On the other hand, if we upgrade from LabVIEW 2011 (which is said to be able to deal with better timer - for the function of data acquisition), how much in total so also buy us more Sound and Vibration 2011.

  In comparison, which of the above two options is preferable in terms of price.

  For your information, I am working on my thesis at University in this means we would like to have a university degree.

  Plesea give me ideas on this subject. I'm sorry if my post is not fit to be posted here but I sent 2 emails to NI Germany (1 for the customer on the Web page Service NOR) and 1 in the Sales Department, but there is no response after more than 3 weeks.

  Thank you very much.

  Kind regards.

  Thinh Vo

  Hi thinhvo,

  All of these VI are included in the Suite Sound and Vibration, which means it's the only additional package that you would need to buy.  On the site OR in the States, the Sound and Vibration Measurement Suite USD $4119 costs.  Since I'm an applications engineer, I'm not in a position where I can advise you on the price, and I am sorry to say that it will be easier for you to contact your engineers in sales in Germany (I guess you are in Germany).  You may have better luck calling into lines of support rather than by e-mail.

  Thank you

  Lisa

• 3D Touch Vibration does not

  3D touch vibration stops and does not work, but tactile 3D works fine, when I restart the phone then the vibration on tactile 3D starts to work again.

  Hi aksh6591,

  Thanks for your post in the communities of Support from Apple! I understand that you are able to use Touch 3D without any problem, but have you noticed that the vibration stops working. To resolve the problem, you have restarted your device and it seems to have the tactile 3d vibration function to function normally again. I know that it is important to ensure that everything works as expected; I'm happy to help you.

  As you have noticed that the restart is only a temporary solution, I would recommend that you restore your iPhone using iTunes. Before doing this, it is strongly recommended that you back up your iPhone using the instructions here:

  The backup of your iPhone, iPad and iPod touch - Apple Support

  Once you're done, take a look at this website for instructions on how to restore your device:
  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

  Once the restoration is complete, choose the option "set up as new" so that you can test the issue before restoring your backup. After you are done testing, you can use the instructions here to restore from your backup:
  Restore your iPhone, iPad or iPod touch from a backup - Apple Support

  See you soon!

• iPhone 3d 7 touch vibration does not

  My vibration tactile 3d stop random work... ive tried all settings like turn touch 3d and vibrating, too much accessibility. The only thing that will fix this restart my phone but he ends up back in a few hours... im thinking it might be a bug. Ive already restored my entire phone to see if that is the question, but it continues to be.

  I have the same question. I restarted my iPhone and it solved the problem, but he was back the next day. It's just not practical to have to reboot your phone whenever it stops working. I think it's probably just a bug. Apple please get on it. I often use Touch 3D and I got used to doing a back vibrations every time.

• My iPhone 7 does not sound it just vibrates?

  Just picked up my new iPhone 7 last night.  When I get a call it just vibrates and has no audible ring.  The Bell Rings when I test it and the volume is high.  It downloaded all my settings from my old iPhone 5 in the cloud.  How can I fix this please?

  Have you checked the key "secret" along the edge, close the external volume controls? Orange = mute.

• New iPhone 7 more - silence button vibrating not?

  Hello, I have the new iPhone 7 more.  On my 6 Plus, while I had the button to silent, silent, I hear a buzzer sound every time I received a call or text. (I use it at work). Now I hear that at all. I then noticed when I change the rear silencer silent steps tab, there is no vibration as he used to do. Is it broken or what? It is in fact a function that I really need.

  Thank you!

  Have you checked the settings > sounds and haptic to see if 'Vibrate to silent' is enabled?

• iPhone 7 vibrating during audio playback

  Hello

  my iphone Black 7, that 128 GB on the last iOS 10.0.1 vibrates a lot when I play audio (music, videos, YouTube etc), it is so annoying because it vibrates on the screen and on the back and the operation of the touch screen or simply hold it's unpleasant. If I reduce the volume to 2 or 3 white dots, the problem will fade and become barely noticeable. And I don't mean high sound volumes (4-5 points is enough to be obvious).

  is it something normal that happens to everyone because of the new front speaker?

  Or is it for lack of an assembly?

  Thank you

  I have it on mine, same model as yours.

• iPhone 5 s no ring or vibrate for calls after update IOS 10

  I have a 5 s iPhone that worked perfectly for over 2 years until I've done 10 IOS updated.  Now it won't ring or vibrate for incoming calls.  It will give sound advice for all applications, but not the phone.  I checked the switch on the side, the sound settings, the mute under accessibility, do not disturb and alert by phone settings.  Everything is as it should be to have audibles.  This phone was in a box of Otter for protection since I got it.  Any ideas of what anything else I could do to fix this?  Miss me him each call unless I happen to look at the screen.

  Have you tried to change the ringtone in the sounds? Try using set a different ringtone temporarily. In addition, with the phone unlocked, press the volume buttons on the side and see what shows on the home screen. You see the volume and it does not show ring or something else? You use a custom or purchased ringtone, or a ringtone native iOS? Some people have reported problems of ringtone on various devices when you try to use the House or purchased made ringtones.

• Map of vibration fade when you drive?

  Hi all. I'm new to watch . While card walk vibration turning is nice it is positively distracting when driving. Here is a means outside the airplane mode to disable vibrations for cards al together or by function for example not do when you are driving? Thank you

  Hello

  On your iPhone, in the application of the watch, go to: My Watch (tab) > maps > disable alerts to turn.

• Need to keep custom ringtone and vibrate

  1. I need to keep a song as my ringtone in iPhone 5 s. I searched on the internet and that moved the songs to iTunes for mobile-> tones. But it does not work.
  2. "Vibrate on ring" is also enabled, but still it does not vibrate on call.

  Can anyone help with this?

  Thanks in advance.

  OK so a lot of people have problems with this part to make a ringtone, it's hard to explain with words if you FaceTime using messenger?

• Vibration

  Hello

  in my iphone 6 vibration never work her make a little noise, but in sittinge is on! ?

  Hello dahyhamed,

  Thank you for using communities Support from Apple!

  Looks like you want to have your iPhone vibrates under notifications.  This vibration can be great to let you know if something is received on the iPhone, especially when you don't want to disturb others by making a sound. I'll be happy to try to help you with this.

  The first thing to check is vibrating.  To access it, tap Settings > general > accessibility.  Scroll to the Vibration and make sure it is turned on.  So you want to go to settings > sounds.  Under the section of vibrate, make sure 'Vibrate on the Ring' and 'Vibration on Silent' are also on, then restart the iPhone and the test.

  If these settings are enabled and the phone is still not vibrating, then the next step would be to reset all settings.  Before you do this, it is preferable that you have a backup.  Nothing that I will propose should result in no data loss, but it's always a good idea to have a backup.  If you follow this link, you will find instructions on how to make a backup:

  The backup of your iPhone, iPad and iPod touch

  Once you have a backup, then perform the reset all settings.  Reset preference files resets all parameters that may be problems. This step will not delete your contacts, photos or personal information. It deletes all your preferences for Wi - Fi, Bluetooth, do not disturb, Notifications, general, sounds, brightness & wallpaper and privacy and removes your Touch ID & password.

  Do you this by clicking on settings > general > reset > reset all settings.

  Once you have done this, test the iPhone and see if the vibration works as expected.

  See you soon!

• Small vibrations cause damage to Macbook Air?

  MacBook Air 13 "early 2015. When I work on my mac on different tables, a small movement can cause a small table vibration that makes Macbook screen, shake (very little, but when even he shakes). It is not very noticeable, but I was wondering if these vibrations can damage the hinges of the Macbook and affect the ability to hold the screen in the future. I also noticed that the Macbook Pro hinges are more difficult, than Air (probably due to the fineness of the Air).

  Any movement causes stress and eventually lead to the failure of the given element.  It's a question of degree and frequency.  According to your description. continue to use your MBA and ignore this issue.  It is to small to worry.

  Ciao.

• iPhone 5 value stopped silent vibrate with incoming text

  Noticed that with iPhone5 set to silent, vibration-free wanted me text messages alerts.

  tried the reset and still nothing

  tried next series/top of another iPhone 5 which worked well...

  But still not vibrating while on silence, for text messages...

  very strange only texts have been affected

  Thanks in advance for any help

  Go to settings > sounds and make sure that this vibration on silent is set on "on".

• Can we get a vibration instead of a haptic on Apple Watch on trips?

  Most sports watches will give a double vibration or something more obvious than a haptic to let you know that you have reached another mile/km.  Apple Watch has just a single haptic.  This is easily missed when running outside.  I think that a more important alert would be appropriate, that similar to what you'd get for a phone call, except just a single/double vibration. Haptic makes sense for iMessages and small things, but need more of an obvious during execution alert when each mile/km is reached.

  Hello

  You can send your comments directly to Apple here > http://www.apple.com/feedback/watch.html

  You can also make a suggestion to Apple on Twitter: @AppleSupport

• Problem with vibrations of the Iphone 5 and SE

  Hello, my name is Alexander, im of the Brazil and I speak very well English. I owned an Iphone 5 purchased in Italy in September 2012 and I used it until today 02/08/16 when I decided to buy a SE 64 GB my iphone because Iphone 5 was a problem that could not be resolved. I used it and noticed the battery was swelling and suddenly the Iphone 5 continues to vibrate in all operations. I took it to the interview and they changed the vibrating motor and the power cable, cable, but does not work. I thought it might be a problem with the motherboard by the blown battery occurried. So I decided to buy a SE 64 GB and when I restored the Iphone 5 in SE, it runs with the same problem. The store give me another a 64 and after the restored backup, the same problem occuried. They had upgraded the operating system, but the only way to solve it was a complete reset of fabric and make a backup of restore contacts and photos through the Icloud

  Can someone help me?

  There are a few app couldn't stop the iphone vibrates? without all my applications and files, the SE Iphone works fine

  I don't know if you want vibration on or off. Anyway, this is the setting you are looking for...

  Settings > general > accessibility > vibrations