MechCommander 2 gives an error '0 bytes of RAM video' in XP mode

Similar Questions

• Error: Invalid byte 2 of 4-byte UTF-8 sequence. BlackBerry_App_Descriptor.xml

  Hello

  I have a special "o" character in the 'description' of the App descriptor attribute. Eclipse gives me this error: "Invalid byte 2 of 4-byte UTF-8 sequence. BlackBerry_App_Descriptor.xml ".

  How can I solve this problem? Thank you.

  Delete this character.  4 bytes in the BlackBerry_App_Descriptor.xml characters are not supported.

• WAP 2.0 ERROR SENDING BYTES ON CHANNEL

  In my apliatication I read a Web page and display them in browser works fine on the emulator

  When I use the wap connection it hangs displays data of bytes and it gives the error what will be the best approach here is the code

  If (srWAP2! = null & coverageWAP2)
  {
  String baseURL = _UrlBuscar;
  _UrlBuscar = getWAP2URL();
  }
  HttpConnection connection = (HttpConnection) Connector.open (_UrlBuscar);
  InputStream input = connection.openInputStream ();
  DataBuffer buffer = new DataBuffer();
  temp of Byte [] = new byte [1024];
  for (;) {
  int bytesRead = input.read (temp);
  If (bytesRead ==-1) {}
  break;
  }
  buffer. Write (temp, 0, bytesRead);
  }
  Input.Close ();
  Connection.Close;
  ByteArrayOutputStream output = new ByteArrayOutputStream();
  Base64OutputStream boutput = new Base64OutputStream (output);
  output. Write ("data: text / html;base64,".getBytes()); ")
  boutput. Write (buffer.getArray ());
  boutput. Flush();
  boutput. Close();
  output. Flush();
  output. Close(); Invoke the browser with the encoded HTML content.
  Private theory = Browser.getDefaultSession ();
  bSession.displayPage (output.toString ());
  } catch (IOException e) {}
  System.out.println ("IOException:"+ e ");
  }

  I found that it was a mistake to return the wap2url as in direct tcp on emulator works never goes through here tks anyway

• Numbers gives an error of syntax for all equations

  I don't know what is happening, but I keep getting errors in syntax for multiple equations and no matter where I put it or how, he always gives the syntax error. Example B2 has 500 in there. Enter B3 B2x2 and it gives an error of syntax instead of 1000.  I leave numbers and re-open the file with the same results. I even opened a new worksheet, and when you enter anything except the Scriptures, I always get the syntax error. It seems that there is something wrong with the numbers himself. Can someone explain why I can't use the formulas at all. They used to work in the past, so I am confused, what can happen.

  Salvation of,

  Did you B2x2 = or = B2 * 2?

  Number change * to x, but seems not to recognize x as the multiplication operator when he entered directly.

  Kind regards

  Barry

• When you access Intranet sites that use SSL certificates issued by our internal PKI, FF for Windows gives an error of "incorrectly put in the form of message coded DER"

  When to access Intranet sites who have the SSL certificates issued by our internal PKI, FF for Windows gives an error message - an error occurred when connecting to myshaw. Security Library: improperly formatted DER encoded message. (Error code: sec_error_bad_der)

  Chrome and IE work fine. This is a PKI again using the signature SHA-2 algorithm.

  I was able to identify the problem. Our public key infrastructure has been using some signature algorithms that FF did not support.

• Sir please help me with my home page. When I put my Home Page about: welcome it gives an error saying invalid Url... Please tell Me how to fix it!

  Question
  Sir please help me with my home page. When I put my Home Page about: welcome it gives an error saying invalid Url... Please tell Me how to fix it!

  Subject: House = without capital letters

• My 3.6.14 keeps trying to update and gives this error message: "the update could not be installed. Please make sure that there are no other copies of Firefox running on your computer and restart Firefox to try again. »

  My OS is Windows XP service pack 3 version. I even tried to install FF4 but he never settle. As I mentioned my FF continues to try to update, but it gives the error message that I set out in the title. Now I don't have access to my FF browser and my life stopped because I have all my saved passwords on FF. I restarted my laptop but it stills try to update himself giving the same error message. I can not also improved my Adobe reader 7.0.7-10 I tried more than 10 times, but it is never up to date. I had this problem Adobe for a long time.

  Run the program Firefox once as an administrator (right click: run as administrator).
  
  If this does not help, then do a clean reinstall.

  Do a clean install (re)-:

  • Download a new copy of Firefox and save the file to the desktop.
  • http://www.Mozilla.com/Firefox/all.html
  • Uninstall your current version of Firefox and remove the Firefox program folder before installing this copy of the Firefox installer.
  • Do not erase personal data if you uninstall the current version.
  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data is stored elsewhere (not in the Firefox program folder) and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

• Satellite M100 gives me error TFncKy when I turn it on

  I have problem with my laptop M100 with shortcut keys.
  It gives me error TFncKy when I turn it on. I did a restore point before I install internet explorer 7 and the problem wasn't there after I installed it, it appeared, it must relate I narrowed down it that much.

  I've got RegCure which is recommended for this kind of problem and it does not work once I've done so many scan. I will not buy another Remover spyware, unless I'm absolutely sure, he will do the job that they want us to pay each one individually.

  If I need to uninstall and reinstall the program, I need to be guided through it, because I did a search in the recovery cd and I can't find the exe program to reinstall

  Sincerely,
  Linda B

  Hello

  I know which is really annoying to you, but I recommend you do the following:

  Back up all your data and recover your computer because you will spend just a few unnecessary time and nerves to find out what the real problem is.
  After retrieving your machine, you should do your updates as usual and set whenever you install new software, a new restore point (as you already :)), then it would be easier for you to find the malicious software that causes this error.

  Maybe you shouldn´t install the IE7, better grab a copy of Mozilla Firefox because they don t cause so many problems with the operating system and other software on your hard drive. (I read today on "plugged in" firefox has been download 400,000 times and I think that 400,000 downloads won´t lie..)  ;))

  Would appreciate comments on your part.

  See you soon

• Satellite A215-7422 - restore DVD gives the error "03-EEEE-0000" 'press 'OK' to restart.

  Hi all!

  I'm trying to restore my Toshiba A215 in the way that it comes from the factory, because I messed with it so that it is not worth of clean install myself if I want to do a clean install of Vista original.

  But for some reason when I booted from the DVD and then chose the "Restore Wizard" or what ever and then it gives me error and makes me reboot. The only things I changed from the factory are a stick 2 gig of ram, latest version of bios and updated firmware for the DVD drive.

  I'm starting to think that the firmware of the DVD drive can affect the DVD because it is not a material commonly updated. I guess right here, but that might be the problem.

  Any thoughts?

  -A_DoNuT

  Hmm... Do you have you have downloaded and used the firmware and the BIOS from the Toshiba page we?
  Satellite A215-7422 belongs to the American TV series and therefore you must use the drivers from the Toshiba driver page we.

  Have you tried to install the OS by using the original CD of Microsoft Windows?

  This allows to know if this problem could be linked to the issue of CD/DVD drive (firmware) or corrupted RAM modules.

  According to your post above, the new RAM 2 GB module has been inserted.
  Perhaps you should withdraw and should try to install the operating system using the original modules were installed in the laptop from the beginning.

  Check it out

• HP p6245d gives error beeps after installing RAM

  My HP Pavilion p6245d desktop computer that has a motherboard of Foxconn H-I41-Μatx gives an error beep code of a short and a long beep after that I installed a 2 GB 1333 MHz DDR3 DIMM on it. The code of the RAM is KVR1333D3S8N9 / 2G, manufactured by Kingston. My system has a 2 GB installed RAM origin, but I would like to install an another 2 GB as it says that the motherboard can support up to 4 GB of RAM. I tried to clean the slots, reseatting RAM, reset the CMOS, etc., but not from their work. I also checked through the internet and I found out there a lot of people have the same problem. Hope someone can help on this issue. Thank you!

  P/S: Operating system is Windows 7 Ultimate 32 bit.

  Hello..
  I would like to ask you something.
  
  The motherboard gives you a beep sounds when the original RAM is installed on the other slot?
  
  If your answer is Yes, then the slot is faulty.
  
  It has only two instances when your PC gives you a beep sounds when the memory stick is plugged.
  
  1. when the memory stick (live RAM) is defective.
  2. his slot memory on the motherboard that is defective.
  
  Find a stick of memory work on all locations on the motherboard. And mark that on which working memory is to give tone to the PC.
  
  It would prove the functionality of your memory locations.
  
  If you have any other questions or if this does not correct the problem, ANSWER.

• I'm doing a Shell call Firefox in the directory C:\Program Files (x 86) of \Mozilla FireFox\ and LabView shell call gives an error.

  I'm doing a Shell call Firefox in the directory C:\Program Files (x 86) of \Mozilla FireFox\ and LabView shell call gives an error. I can go to the BACK shell and make the fine call, but Labview Shell gives several errors. Anyone know how to get around the problem of directory with the name of the Program Files (x 86) directory with space and the (x 86) BACK doesn't seem to like?

  You must use quotation marks.

• Vista - Windows Update fails and defender gives the error code: 0 x 80080005

  Well, I downloaded Veoh Web Player and DivX player (with a driver package) almost the exact same time, so I don't know who caused the problem. (Guessing Veoh done.) I restored system which usually solves it for me and then uninstalled both programs and even if my computer is not nearly as slow as it was when they were both installed, it's always problems. Windows open frequently stops responding. As I said, the system restore only makes it better for a short time while longer I go without eating, the freezier my computer becomes. I also noticed that for about 2-3 days (after which my computer almost completely freezes and I have to startup repair) most minor cosmetic changes.

  I use Firefox, so the first change I noticed was that left side of the address bar in a small half circle in a regular square. Tiny. Then the scroll bars on all the programs I've used lost their Aero look and returned to normal, old style Windows. Eventually good menus click lose their new look, then all the start menu, and finally Windows Explorer stops working and all the windows, when not in use, become small tabs at the bottom of the screen. After that the computer hangs almost entirely.

  Each time I restart or system restore the first thing I see is a little box that says that a Windows host process has stopped working. Windows Update continually fails and Windows Defender gives the error code 0 x 80080005. What can I do? I looked for answers before coming here to help and what I read it looks like a downloaded driver can interfere with the host process, even if I uninstalled it (supposedly) all. Thank you.

  Applications, (Norton and McAfee) are known to not uninstall (or upgraded) themselves.

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. now to reset Windows Update by...

  How to reset the Windows Update components?
  [Access KB971058 via Internet Explorer only;] Run the difficulty in DEFAULT and AGGRESSIVE mode]
  http://support.Microsoft.com/kb/971058

  5. restart & test.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Alpine Ski 2007 gives the error "ERROR in LOADING X 64 DRIVER. YOU FORGOT TO RESTART? »

  Alpine Ski 2007 gives the error "ERROR in LOADING X 64 DRIVER. YOU FORGOT TO RESTART? "I have restart after the installation of the program on Windows 7 for a Dell PC. The demo version has worked on this computer, but after buying the DVD, it doesn't. I tried all the switches compatibility under properties, but nothing works. Thanks for any help.

  Hello SQUARKMAN,

  I did a little research, trying to determine the compatibility with Windows 7. It doesn't seem to be compatible, since its last update compatible with Windows 2000/XP shows.

  You could try running in compatibility mode, or if you have the XP mode, you can try to run in there also determine if you have better success.

  Hope this helps

  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I've got an important update that I can't install it because the continuous computer give the error 80070666

  I'm the only user on my computer and so I should have all the priveliges needed to install the update, but it still gives the error =)

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file that you saved in #1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. If the Office 2003 SP3 still fails to install, see...

  Description of the update for Office 2003 (December 9, 2008)
  [Download/install manually, if necessary & not already installed)
  http://support.Microsoft.com/kb/949074

  You can not install a service pack for Office 2003
  http://support.Microsoft.com/kb/884298

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Security update for Windows XP downloads but fails during installation that gives 0x8007F0F04 error code

  Security update for Windows XP downloads but fails during installation that gives 0x8007F0F04 error code

  FixIt, reboot, try again not useful

  How can I get the security properly installed?  or what happens if I don't?

  Original title: 0x8007F0F04

  Hello

  1. what day you're talking about?

  2. what Microsoft fixit you talking?

  3. don't you make changes to the computer before the show?

  Please follow the steps from the link below.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/958051