Media Center and WMP 12 does not not my MP3 files, two strange errors

Similar Questions

• Media Center or the player does not work

  I am running Windows 7 Home Premium 64-bit. Saturday things seem to change. I have no update on my end, but does not have the Media Play/Center and IE8 does not work properly. I don't see even the media player in the list of programs. I uninstalled the media player and the IE8 and reinstalled them, no luck. I went through the Event Viewer logs and don't see one thing that means nothing. Everything worked until Saturday. I can't think of a thing that happened Saturday outside the normal conditions of use. Any suggestions?

  I am running Windows 7 Home Premium 64-bit. Saturday things seem to change. I have no update on my end, but does not have the Media Play/Center and IE8 does not work properly. I don't see even the media player in the list of programs. I uninstalled the media player and the IE8 and reinstalled them, no luck. I went through the Event Viewer logs and don't see one thing that means nothing. Everything worked until Saturday. I can't think of a thing that happened Saturday outside the normal conditions of use. Any suggestions?

  azism,

  Do a system restore as soon as possible. Take Windows 7 back to the way it was Friday, before the end of the world!

  :)

  Carlos

• 2005 media center edition dvd player does not read Dvd

  My support 2005 Centre of dvd player will not play any Dvd code error indicates "can not read the dvd.

  Probably, it is because you do not have a compatible MPEG2 decoder installed.
  Could install you the Decoder Checkup Utility from MS, launch it and display the results?

  Kind regards
  Chris MS - MVP (Media Center) [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Media Center problem because it does not change the channel

  I recently changed my dish satellite Direct who changed the channel to 3 4.  My Media Center on my desk, I cannot change just the channel without going through the entire installation, which also requires a configuration for "Câble IR" which, for some reason, it does not.  Therefore, the only option I have given is 'back' or 'Cancel '.  'Back' has no effect except to find the IR cable, in vain.  'Cancel' I shot with no changes!  I'm stuck.  All I want to do is change the channel to receive the TV signal.  Help, please.

  Thank you, Ernest Smith

  Sorry, stupid.  All I had to do was change the channel with the remote control.

• WMP 11 does not add the files in folders, I got to watch, and does keep a record of the aforementioned files.

  When trying to get windows media player to watch records, going "file > add to library > advanced options > add" WMP responds in any way and when I reopen it add it to the dialogue of the library, the files I've selected are no longer in the box. Apparently, there is no record of me even after selecting the folders. I restarted WMP several times, and I get the same result. Any help is appreciated. I'll answer all the questions, if not immediately, then soon.

  Hello

  (1) do you have made no changes before this problem?

  (2) you get an error message?

  You can try the following steps and check.

  Method 1: You cannot view, add, or delete items in the library of Windows Media Player 11

  http://support.Microsoft.com/kb/925718

  Method 2:

  You can try to turn off and turn on Windows media player and check if it helps.

  Step 1:

  a. go to start and in the search type 'Turn Windows has or not'.

  b. click on "Turn Windows features on or off".

  c. find multimedia and uncheck the brand in the face of Windows Media player.

  d. restart the computer

  Step 2:

  a. go to start and in the search type 'Turn Windows has or not'.

  b. click on "Turn Windows features on or off".

  c. find the multimedia functions and place a check mark in front of the Windows Media Player.

  d. restart the computer.

  Check out the link:

  Turn on or off Windows features

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-features-on-or-off

  Hope this information is useful.

• Windows media player 11 in XP does not play DRM files

  I have a new installation of SP3 and the latest WMP11 on XP Home.

  I get this error when I try to play any DRM file any provider:
  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5262&ID=C00D11B1&ContextId=71&OriginalID=80070057
  You met the C00D11B1 error message when you use Windows Media Player.
  Original Original error error Code
  80070057 one or more arguments are invalid.

  All other types of video or audio files that are not protected by DRM play without problem, so there is no problem with the audio device or the ID3 headers because none of the DRM files I've tried are MP3s.

  Many hours of research I find that the error is returned for various problems. I tried all the solutions, and none of them solve the problem.  It may be missing or conflicting codecs like all types of files not DRM play without problem. The quartz.dll is recorded and uncorrupted. I reinstalled WMP11 several times. I have reset the DRM with Microsoft tools both Netlix and individualized WMP11 using several MS individualazition sites and by force using the command-line of the several times with each reinstall.

  The last thing I tried is to use the resetDRM tool and not to individualize and then installed Amazon Unbox for rentals and video purchases. I ran the troubleshooting included in Unbox and let individualize WMP11, then troubleshooting reported no problems with my set-up. I downloaded a free file short Amazon and although he'll play the Amazon unbox player, trying to read the file in WMP11 always returns the same error as before and therefore trying to play one of the other DRM files I have.

  If someone has another solution or an idea of what to check that the usual suspects?

  Hello

  Sometimes, this problem can be caused contributions file included with the MP3 ID3 headers. Make a copy of the file and then use an ID3 tag non - editing program Microsoft to remove or reset the file's ID3 headers.

  Caution:

  • Try to remove ID3 headers might damage the file and make it unplayable. Therefore, always make a copy of the file before editing.
  • Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Reference link:

  Windows Media Player C00D11B1

  http://Windows.Microsoft.com/en-us/Windows7/C00D11B1

  Note: This link implies the Player Windows media 11 and 12.

• Sony music and album app does not find the files on the device,

  Like new the music app Sony Z5 found all the music on my SD card

  I downloaded now more through music amazon app, but they do not appear in the app sony music. Any ideas how to get new music appears in the application Sony Music?

  Never had this problem with my Xperia Z

  Thank you

  Hello

  I have tired a few things and understand the problem - it's the Amazon app

  1. I opened Commander file and could see the files, but they are stored in a different folder of Android/data/com.amazon.mp3/files/Music. I copied the files in the folder media/Android/media /, then the files are repeatedly maximum and so that works.

  2. / android/data/a a .nomedia file that I deleted, but the file is restored back automatically

  Technically the Amazon app should store the files in/Android/media, but is not

• After loading of Roll Up 2 for Media Center and WMP 11 TV is not only audio signal of work remained.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  You use Windows Vista or XP?

  Try to download the latest drivers from the manufacturer of your tuner card and check if you get your video signal.

  We can't wait to hear back on your part.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Firewall, Security Center and Windows updates does not

  Hey guys

  Original title - I really need help with my computer

  I really need help, my firewall will not turn on when I try to turn it on it says that "firewall Windows was unable to make a requested update.
  When I try to turn on my Security Center it says "the Security Center service can not be looked at" and it's the same problem with my Windows Update
  When I click on "Find updates", it says "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer. "I don't know what the problem with my computer, but if there is still someone can help me I would be really appreciated.

  Download and install Windows Repair:

  http://www.bleepingcomputer.com/download/Windows-repair-all-in-one/>

  UTC/GMT is 02:29 Sunday, November 25, 2012

  DAF

• Windows Media Player 12 (WMP 12) does not respond when you use "Find Album Info".

  Dear friends,

  I notice a problem to update my album information. I recorded a small screen cast for so I hope this helps to demonstrate.

  Link: http://cid-0ebe23e0057cf637.office.live.com/self.aspx/.Public/WMP%2012%20Not%20Responding%20 ^ 5Full ^ 6.wmv

  I tried to reset the library, are most of the songs/music to AAC (iTunes, no DRM) format.

  Any suggestions would be greatly appreciated. It eventually will come back so I don't know if it is a bug or just design.

  Thank you, in advance.

  Hello

  1. are you able to update the information of the album for other types of files?

  Try to read the file in the clean boot state and then update the info from the album and check.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

  I hope this helps.

• I just upgraded to 3.6.10 3.6.8 and now FF does not start. It gives an error message saying version 1.9.2.8 platform is not compatible with 1.9.2.10

  Read the question!

  Do a clean reinstall and download a new copy of Firefox since http://www.mozilla.com/firefox/all.html and save the file to the desktop.

  Uninstall your current version of Firefox and remove the Firefox program folder before installing this copy of the Firefox installer.

  It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  You can skip the step to create a new profile, which is not required on this issue.

  See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• Update of the freezing window and windows 8 does not upgrade to 8.1 with error code 80070103

  ORiginal title: Update window point of freezing and windows 8 not upgrading to 8.1

  When I try to check the updates of the window is blocked and I cannot nor click on any other button or can I close the window. I can also go to 8.1 I get on an error 80070103

  Hey Watson,

  Run the Windows update troubleshooting tool can help get the problem solved.

  Question: Computer crashes when checking for Windows updates

  Method 1: run Windows Update Troubleshooter and check if it helps.
  a: press the logo Windows + O to open the search box.
  b: Type Troubleshooting, press ENTER.

  c: now, click on System and Security.

  d: Now click on Windows Update

  Method 2: Follow the steps in the link provided.

  
  Windows Update crashes when the download or installation of updates
  http://support.Microsoft.com/kb/2700567#Method1

  Note: The applications that came with your PC or you installed fromWindows Store will be reinstalled, but all the apps you have installed other Web sites and DVD is deleted. Windows puts a list of applications on your desktop after you refresh your PC.

  Question: Get the error code 80070103 0 x during the upgrade to Windows 8.1 of Windows 8

  Click on the link below and see if it helps.

  http://Windows.Microsoft.com/en-us/Windows-8/update-from-Windows-8-tutorial

  I hope the information helps solve the problem. If you have any additional questions or for any question related to Windows, feel free to post. We're here to help.

• openScript and jfsl openDocument does not find a file while there are

  I have C:\flash\FlashApplication1\FlashApplication1\FlashApplication1.as

  package {}
  
  import flash.display. *;
  
  SerializableAttribute public class FlashApplication1 extends MovieClip {}
  
  public void FlashApplication1() {}
  Super();
  }
  }
  }

  and C:\flash\FlashApplication1\FlashApplication1\bin\Debug\FlashApplication1.jsfl

  var uri = "file:///C:/flash/FlashApplication1/FlashApplication1/FlashApplication1.as";
  var swf = uri.substr (0, uri.length - 4) + ".swf";
  var target = "file:///C:/flash/FlashApplication1/FlashApplication1/bin/Debug/FlashApplication1.swf";
  var doc = fl.openDocument (uri);
  fl.compilerErrors.clear ();
  doc. Publish();
  If (FLfile.exists (swf)) {}
  If (FLfile.exists (target)) {}
  FLfile.remove (target);
  }
  FLfile.copy (swf, target);
  FLfile.remove (swf);
  }
  fl.compilerErrors.save ("queue: / / / C:/flash/FlashApplication1/FlashApplication1/bin/Debug/Fl ashApplication1.err'");
  FLfile.write ("file: / / / C:/flash/FlashApplication1/FlashApplication1/bin/Debug/FlashApplica tion1.amethyst', 'done'");

  
  When you run jfsl in flash command run it says it can't find file:///C:/flash/FlashApplication1/FlashApplication1/FlashApplication1.as on the 7 line (var doc = fl.openDocument (uri);) while there is at this location. Do you see why and how to remedy?

  I looked at the official doc on openDocument
  http://help.Adobe.com/en_US/Flash/10.0_ExtendingFlash/WS5b3ccc516d4fbf351e63e3d118a9024f3f-7b97.html

  It shows a weird path syntax:

  var doc = fl.openDocument("file:///c|/Document.fla");

  I tried to use file:///c| instead of file:///c: but it didn't work either.

  I also tried openScript, and it didn't work either too.

  put a test file on the root of c and access.  Then put the test file in c:\flash.  then in c:\flash\FlashApplication1 etc.

• Unable to sync music using Windows Media Center and Windows Media Player will not open

  Media Center will not sync music!

  I recently opened Media Center and I had no music in the library. I have constantly played music from the library so I didn't know what is happening. When I try installing the library again once it tells me that a necessary component for Windows Media Center is not available. I have not changed or downloaded something different. I went to check if Windows media Player is the multimedia file sharing. The message I get from that is, basically, that something is missing.  Now my Windows Media Player is not even opened. I wonder if my Zune Player (80 GB) has nothing to do with the problem. I charge my player when this has happened, but I do this all the time so I am at a loss. I went to the page "problem reports and Solution." It is the symbol of the Media Center window and says that the problem is caused by Windows. The solution is to update to windows; which I am fully updated. I tried to restore the system to an earlier date, but that doesn't work anymore. I'm at a loss to know what being of any help would be appreciated.

  As a side note video playback, TV and photos also works very well in Media Center.

  Thank you

  Shay

  Thank you, Shay

  Hi Shay,

  You can try the following steps and check the result:

  Step 1: Run the sfc scan to repair system files missing and corrupt.

  a. Click Start, click programs, accessories principally made, right click Guest and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  b. type the following command and press ENTER: sfc/scannow

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information, visit this link:http://support.microsoft.com/kb/929833

  If the problem persists, try the reconstruction of the library:

  Step 2: Library rebuild Windows media player.

  This problem can also occur if the library is corrupted. Rebuild the library and check if this solves the problem.

  Follow these steps:

  1. exit Windows Media Player.

  2. click on start, run, type %LOCALAPPDATA%\Microsoft\Media Player, and then click OK.

  3. Select all the files in the folder and then click on Delete on the file menu.

  Note: You don't have to remove the folders that are in this folder.

  4. restart Windows Media Player.

  Note: Windows Media Player automatically rebuilds the database.

  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

  1. exit Windows Media Player.

  2. click on start, run, type % LOCALAPPDATA%\Microsoft, and then click OK.

  3. Select the Media Player folder, and then click on Delete on the file menu.

  4. restart Windows Media Player.

  You can also view the following green button and check if it helps:

  http://thegreenbutton.com/forums/t/38766.aspx

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Media Center and Windows media player 11 will not work on my Gateway (Vista) computer

  On my windows media player, I get the following comment after I try to read the dvd:
  Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Try to install a driver available for your video card.

  On my media center to windows, I get the following comment:
  The dvd can be used by other players, need to change resolution b/c it is too high.

  But Tuesday, I played the DVD without problem and now, I am confused and I need help to understand what is happening.

  Hello texanbelle,

  Thank you for using the Microsoft answers Forum.

  I am including instructions below a scan to help repair the system files related to some components of Windows, including Windows Media Center, and Windows Media Player.

  Repair Windows Vista Media Center files

  You can use the following steps to repair files that are part of Windows Vista Media Center:

  1. click on the Start menu, choose all programs, then Accessories, then right-click on the item to the command prompt and select run as administrator

  2. click on continue to allow it to open a prompt with administrator privileges

  3. run this command in the cmd prompt: sfc/scannow

  4. the cmd prompt should list text stating "start system analysis. This process will take time. »

  5. wait for the scan to complete (this may take several minutes, so be patient).  This command will scan all protected system files and attempt to replace the incorrect versions by appropriate Microsoft versions

  6. once the analysis is complete, the SFC tool will indicate whether or not it found no problems and whether or not he was able to correct

  7. If any errors are reported that SFC could not resolve, there are steps in this knowledge base article which explain how to locate and attempt to correct errors

  8. after fixing errors that are found, try to use Windows Vista Media Center again.

  Fix Windows Vista Media Center registry entries

  Unfortunately, there is no easy way to fix key/registry values that are installed by Windows Vista, as there are files.  If you want to try to repair the registry values/keys that are part of Windows Vista Media Center, you will need to re-run the installer of Windows Vista operating system and repair the operating system.

  Try this and tell us if it helps with your question.

  Judd
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.