Media Player 12 "play to" missing option in trying to sink from PC to TV

Similar Questions

• How to convert an mp3 file to a file rtext? Can I use windows media player to play mp3 and have the recigition speech to convert to text?

  Can I use windows media player to play mp3 and have the recigition speech to convert to text?

  You can get on a conversion of 70% in reading a file in Windows Media Player using something like Dragon Naturally Speaking to convert. If you set the playback speed to slow in Windows Media Player to play > play speed, you will get a better result. The best option is to download the file to an audio transcription service, but which generally costs 0, 50-1, 00 per minute of audio.

• Cannot read DVDs, error: Windows Media Player cannot play the DVD because no compatible DVD decoder is not installed on your computer

  DVD playback problem started today.  SE message: Windows Media Player cannot play the DVD because no compatible DVD decoder is installed on your computer ot.  I have not had this problem before.

  Hi RosemaryHanna,

  Thanks for posting in the Microsoft community!

  I understand that you are unable to read the DVD. I will try to help you with this question.

  (1) did you make any changes before the show?

  (2) the video works fine when playing any video recorded or audio files on the computer?

  Method 1: Solve the video issues in Windows Media Player and other media or library

  http://support.Microsoft.com/mats/windows_media_player_diagnostic/?WA=wsignin1.0

  Method 2: You can see the steps mentioned in the article below

  Supported decoders MPEG - 2 software DVD in Windows Media Player for Windows XP and Windows Vista

  http://support.Microsoft.com/kb/306331

  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Let us know the status of the issue. I will be happy to provide you with the additional options that you can use to get the problem resolved.

• Windows media player11.error windows media player cannot play dittos theplayer might not support the file type or might not support the codec used to compress the file

  • y at - it software that could help me.which will work with my Media Player to convert almost any format or find the good codec.so I can watch my videos, I have downloaded on my documents.there need some software out there that would do this work.so my media player 11 play my videos.

  Hi Bbdunford,

  O what is the file format?

  O if it works well before?

  Today, there are hundreds of audio and video codecs in use. Some were created by Microsoft, but the vast majority of codecs have been created by other companies, organizations or individuals. By default, the Windows operating system and the player includes a number of the most popular codecs, such as MP3, Windows Media Audio and Windows Media Video.

  There might be times, however, when you want to read the content that is compressed with a codec that does not include Windows or the default player. In many cases, you can download the necessary codec on the web for free or for a fee. And, in some cases, the player can automatically use the codecs installed by other reading programs and the creation of digital media on your computer.

  You may encounter this error message for the following reasons:

  1. the file type is supported by the drive, but the file was compressed by using a codec that is not supported by the player.

  2 - the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player cannot play the file.

  You can try the steps and check if it makes a difference.

  1. in order to determine what codec was used with a specific file, play the file in the player, if possible. When the file is playing, right-click the file in the library, and then click Properties. On the file tab, look at the sections of video codec and Audio codec.

  2 download and install Codecs by clicking on the PLAYER tab and check. To connect to the Internet and automatically download Codecs player

  3. configure the protocol settings

  On the Tools menu, click Options, and then click the Network tab.

  In the Streaming protocols area, select all the check boxes Protocol.

  When connecting to a server running Windows Media Services, Windows Media Player tries to use all selected protocols.

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  http://Windows.Microsoft.com/en-US/Windows/downloads/wmplugins+.

  Previous post: the result.

  Bindu S - Microsoft Support
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• DVD & will not play... or power dvd or windows media player will play them...

  PUT THE DVD IN THE CAR DOES NOT START DEFAULT PLAYER "POWER DVD... REINSTALLING "POWERDVD" USING THE DISC DID NOT WORK... WHEN WINDOWS MEDIA PLAYER IS IMPLEMENTED AND 'NOW PLAYING' HIT... WILL NOT PLAY.  USING THE WINDOWS MEDIA VERSION 10 PLAYER... SYSTEM SAYS "INSERT DISC" IN THE DRIVE E... MEDIA PLAYER WILL PLAY LIBRARY STUFF. ALSO EVEN FOR CDS.

  CDS PLAY WITH MEDIA PLAYER... I FORGOT TO REMOVE THE DVD FROM THE DRIVE... OOPS

  Hello

  1. what exactly happens when you try to install POWERDVD?
  2. what version of Power DVD software do you use?
  3. do you have Power DVD option on the window of Autorun?
  4. are you able to play the content of the DVD if the windows Explorer?
  5. What is the format of the video?

  Please answer these questions and provide more information clearly on the issue. This will help us assist you better.

  Windows vista has windows MediaPlayer 11 integrated. You must use the windows media player 11.

  To determine the version of Windows Media Player, click onwords in the menuhelp in Windows Media Player and note the version number below the copyright notice. If the menuhelp does not appear, open windows media player, press ALT + H and then click on towords.

  Also, please take a look at the below items that could you.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

  How to ask a question
  http://support.Microsoft.com/kb/555375

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Error: Windows Media Player has encountered an error when it tried to play music

  Original title: Windows media player

  my pc crashed and I lost all my data. A colleague fixed it for me, but the copy of windows is not validated. However it works reasonably well, except that windows media player does play not any pop music box says that it has encountered a problem. How can I fix this and get my Media Player?

  Hi billybluegum,

  1. it occurs when you play a particular file type or all types of files?

  As Windows is not validated, it may be that some features do not work correctly.

  Step 1: Try the steps mentioned in this article and check the result:http://support.microsoft.com/kb/279242

  Step 2: We recommend that you scan sfc (System File Checker) to see if any system file is missing or damaged. To do this, try the following steps:
  a. visit http://support.microsoft.com/kb/929833
  b. run the scan successfully.
  c. restart the computer so that the changes take effect and check the result.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows media player does not automatically open a video file on a Web site but I save it and open the file with Windows media player to play the video or audio recording.

  Windows media player does not automatically open a video file on a Web site but I save it and open the file with Windows media player to play the video or audio recording. I used to be able to play any video or audio file in any site!

  Hello

  Try resetting the default associations for WMP and IE.

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
  How to associate a file Type of Extension to a program under Vista
  http://www.Vistax64.com/tutorials/69758-default-programs.html

  If necessary:

  How Unassociate a Type of Extension file in Vista - and a utility to help
  http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.html
  Restore the Type Associations by default Vista file extensions
  http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html
  How to view and change an Extension of filename on Vista
  http://www.Vistax64.com/tutorials/103171-file-name-extension.html

  ====================================

  Also follow these steps:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ------------------------------------------------------------

  Then, if necessary:

  Have you recently installed another player?

  Reset your associations for WMP and IE.

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
  How to associate a file Type of Extension to a program under Vista
  http://www.Vistax64.com/tutorials/69758-default-programs.html

  ---------------------------------------------

  Do this to reregister the Jscript.dll and Vbscript.dll files.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  type or copy and paste-> regsvr32 jscript.dll
  Press enter

  type or copy and paste-> regsvr32 vbscript.dll
  Press enter

  Restart and if all goes well, it will run now.

  --------------------------------------------------------------

  Have you recently added stores or ANY application from Stardock?

  Using 64-bit Vista?

  Can you think of recent things you did in WMP which could be the cause? You added another
  reader recently or an add-on for WMP?

  When I try to use Windows Media Player 11, the program does not start, or some UI elements
  are empty - a Mr Fixit
  http://support.Microsoft.com/kb/925704/en-us

  Maybe something here
  http://msmvps.com/blogs/chrisl/articles/17315.aspx
  and here
  http://msmvps.com/blogs/chrisl/Archive/2004/10/30/17399.aspx

  Check here the news of WMP11
  http://zachd.com/PSS/PSS.html

  I hope this helps.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Windows Media Player 12 plays not DVD

  Hello, I have a new Windows 7 Ultimate, 64-bit system, running on a Gigabyte motherboard / Intel Core i7 920, built in the last days. I try to read commercial standard DVDs (e.g. Titanic) on the drive to DVD Samsung through a high-end Nvidia 1 GB graphic card, through Windows Media Player Version 12.0.7600.16415.

  NOTE: VLC Player works fully, showing that the material (audio / video) is properly installed.

  When you use the media player in Windows 7, I received the message "Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Try to install a driver available for your video card. The options are 'Close' or 'Web Help', where the latter gave no information.

  This situation occurs through the display of several DVD media are OK.

  I downloaded a lot of codecs on the Net, ending up with very pixelated video and distorted sound under Windows 7 Media Player.

  I have now uninstalled these Codecs and VLC Player still works AOK.

  Where are you offering me I have Windows 7, 64-bit codecs, Windows Media Player Version 12.0.7600.16415 player?

  Hello

  This error "Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Try to install a driver available for your video card"is normally related to the video driver being unsigned. If your driver is not signed, you will not be able to play protected content, including DVDs.

  Try to install the latest video driver and see if the problem persists.

  Thank you
  Archana

• How to make Windows Media Player to play music files in a specific folder?

  Can I have Windows Media Player to play music files in a particular folder without creating a playlist of this folder?

  Hi again-, I was simply responding to your other post on the album art.

  Yes - you should be able to select "Play with WMP" just by selecting the folder, then right click (as in the photo below) If you don't see your needed looking for reception settings not this option... that's what you found?

  Thanks - Ric.

  

• Impossible to play a video file, error: Windows Media Player cannot play the file because the required video codec is not installed on your computer.

  I am unable to play the video file and get the error "Windows Media Player cannot play the file because the required video codec is not installed on your computer."

  Can someone help me how to solve this problem. Thank you

  I am unable to play the video file and get the error "Windows Media Player cannot play the file because the required video codec is not installed on your computer."

  Can someone help me how to solve this problem. Thank you

  May be that the video file format is not compatible with Windows Media Player.

  Options: -.

  1] download and install VLC Player. It's free and supports file formats more than WMP.

  2] download and install the codecs

  Personally, I prefer VLC Player-if you have that then not need to download and install the codec of any third party.

• I can't play DVDs in Windows Media Player 12 on Windows 7 Pro and get this error msg: Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection.

  Hello, thanks for reading and helping me.

  I try to play a legitimate, belonging to DVD, but Windows Media Player 12 will not play on my computer Windows 7 Professional.  The DVD worked a few days ago, but all of a sudden, I get the following error message:

  "Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD player and the video card protection decoder. Try to install a driver available for your video card.

  I did a lot of research of these forums and on the ' net.  Here are the suggested steps I tried without success:

  • I tried VLC player.  This works.  However, rather than use this workaround, I wish to find a solution to my problem WMP/WMC.
  • I tried several DVD for years over the last decade.  These DVD works on my laptop, also running Windows 7 Professional and the shark 007 codec.
  • I uninstalled my Shark 007 codec
  • I tried other codecs (K-Lite)
  • I assured that the latest drivers are installed on my video card, XFX ATI Radeon 5850
  • I tried to uninstall Nero 9
  • I tried to use the Windows 7 troubleshooting options:
  • > Reading and burning CD, DVD and Blu - ray (no problem)
  • > Windows Media Player DVD (no problem)
  • > Windows Media Player Settings (detects a problem, wants to restore factory settings, every time, no matter what happens)
  • A system restore to a time when the DVD was working did not resolve the issue
  • The different links in Microsoft, I found in this forum about this problem do not seem to be useful.  There is a link that points to the set-top boxes, but this page just says: "Windows 7 comes with a decoder.
  • I assured the latest driver is available by going to "Device Manager", right click on the drive, then click on "update driver software".
  • I assured that the latest firmware is installed directly from the manufacturer's website.
  • I tried to reset my DRM by renaming the DRM under C:\ProgramData\Microsoft\Windows folder and by going to this Web site to upgrade:http://drmlicense.one.microsoft.com/Indivsite/en/indivit.asp?force=1
  • I've uninstalled and reinstalled Windows Media Player 12 and Windows Media Center via the function "functionality in Windows.

  I would be very grateful if a Microsoft technology could chime.  Thanks for your help!

  MY COMPUTER:
  DVD drive: TSSTcorp CDDVDW SH-S203N ATA Device (Samsung)
  Driver: Microsoft 6.1.7600.16384, dated 06/21/2006
  Graphics card: XFX ATI Radeon 5850 Black
  Motherboard: Gigabyte GA-X58A-UD3R
  Processor: Intel i7-920

  -Intel i7-920, Corsair 6 GB of RAM, ATI Radeon HD 5850, Gigabyte GA-X58A-UD3R, Corsair 800 d case

  Hello

  Try this free program:

  http://www.DVDFab.com/passkey-Lite.htm

  Carlos

• Windows Media Player cannot play the file because of a problem with the network or firewall settings.

  Windows media player cannot play the file because a prblem with the network or firewall settings, you can help me solve this problem?

  original title: windows media player

  Hello

  1. you remember to make changes to the computer before this problem?

  2. do you get this error when you try to play a specific file or all files?

  Follow these methods.
  
  Method 1: Open the troubleshooting Windows Media Player settings Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2: I suggest that you disable Antivirus software and firewall temporarily and check.
  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software Tour

  Enable or disable Windows Firewall
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  Note: Firewall and antivirus to protect your computer against viruses and other security threats.  In most cases, you should not disable it.  If you have to disable it temporarily, you should reactivate as soon as you are finished.  If you are connected to the Internet or a network while the firewall and anti-virus are disabled, your computer is vulnerable to attacks.

  
  Method 3: try to change the proxy settings.

  a. open Windows Media Player, press the Alt key to bring up the file menu.

  b. click on the Tools menu and select Options. Click the network tab.

  c. Select a Protocol (HTTP and RSTP), click Configure , and then select Autodetect proxy settings or use proxy settings of the Web browser (available for HTTP protocol only). Do this for each protocol.

• Windows Media Player cannot play audio files

  Hi, I have Toshiba laptop, this is my baby, and all of a sudden I can't play sounds! When I click to play a song in windows media player, it says:

  Windows Media Player cannot play the file because there is a problem with the audio device. It might not be a sound device installed on your computer, it can be used by another program, or it may not work properly.

  I tried everything and I'm on my last nerve! Basically, I'm rubbish with computers, I do not understand this at all, I followed all the ways suggested by the section 'aid' in my computer and I can't always listen to 'The Feeling!' Please help, I'm going crazy here!

  Yes my friend. The computer world is really not easy to understand, and sometimes I wish that I could no longer live the island of computer.
  but you know, the development never stop.

  OK, now your problem; have you checked the Device Manager?
  You don't see any yellow exclamation next to the sound card?

  I think that you should first try reinstalling the audio driver. Of course, it s a very tips but especially it works essentially ;)

• DVD Windows media player cannot play this dvd because it is not possible to activate the ANALOG on the output display copy protection try to install a driver available for your video card

  When you try to play a dvd it (above) is displayed. Anyone know where I can be able to get a updated driver free for my video card, or in any other way to solve this problem. your help would be greatly appreciated. Thank you.

  When you try to play a dvd it (above) is displayed. Anyone know where I can be able to get a updated driver free for my video card, or in any other way to solve this problem. your help would be greatly appreciated. Thank you.

  =======================================
  What version of Windows are you using?

  The free VLC Media Player may be worth a try...

  It will play anything.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (32-bit Version)
  http://www.filehippo.com/download_vlc_32/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.5 - win32.exe)

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (64-bit Version)
  http://www.filehippo.com/download_vlc_64/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.5 - win64.exe)

  And the following links may be worth a visit:

  (2004673) Windows Media Player cannot
  read the DVD because it is not possible to
  turn on analog copy on the output protection
  view
  http://support.Microsoft.com/kb/2004673

  Windows Media Player cannot play the DVD because it is not
  possible to put on the protection against analog copying on the output screen
  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=12.0.7100.0&ID=C00D1167&ContextId=61&OriginalID=C00D1167

• Get an error "Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. "

  * Original title: wrong Region

  Windows Media Player will not play CD - advise

  "Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. "

  Note I am eager to play a CD and it is recognizing a DVD?

  can anyone help

  Hello

  1. what version of Windows is installed on the computer?

  2. what version of Windows Media Player is installed on the computer?

  3. what region is your currently defined DVD player on?

  4. are you able to play other DVDs?

   

  Please follow the provided steps and update us with the results.

  Note: All the steps apply to Windows 7

  Method 1: Try to change the region of the DVD player and check the result. To do this, try the following steps:

  a. Click Start, click computer.
  b. right click on the DVD drive, and then click Properties.
  c. click on the Hardware tab, click the properties button and modify the DVD of the region.

   

  Method 2: Uninstall the DVD player and check.

  a. Click Start, type devmgmt.msc and press to enter.

  b. develop DVD players, right click on the sub element and click on uninstall.

  c. restart the computer and check the result.

  Once you restart the computer, the DVD driver will be loaded automatically.

  d. try to play the DVD and check the result.

   

  You can run the troubleshooting Windows Media Player DVD Troubleshooter and check that it helps.

  Open the Windows Media Player DVD Troubleshoot utility

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-DVD-Troubleshooter

  Let us know if it helps!