Media Player won't let me burn CD

Similar Questions

• Windows Media Player won't let me burn CD, "connect a burner and restart the player."

  I use to be able to copy CDs on my computer. Windows Media Player now, says "connect a burner, then restart the player."

  There must be something simple that I know, I'm just bad at computers :)

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Media Player won't let me record cd.

  Media player11 won't let me record cd. He always tells me to put on a recordable cd. I've changed several times. the computer keeps saying to recordable cd?

  Hello

  1 did you change your computer, after which the issue started?
  2 - is your able to play other CDs CD '?
  3 have you tried with different brands of CD?
  4. have you tested the recordable CD on another computer?

  If your CD/DVD drive does not read or write media, please click 'Run Now' of this article and check if it helps.
  http://support.Microsoft.com/mats/cd_dvd_drive_problems

  See also:
  Burn your own custom CDs

• Windows media player won't let me sync my music on my mp3 player and I've never had a problem before

  whenever I try to sync the music on my mp3 player today it says that windows media player cannot find the file. If you are trying to play, burn, or synchronize an item in your library, the element can point to a file that has been moved, renamed, or deleted. and I nothing marked c and can not understand this please help

  What version of Windows are you using?
  What version of Media Player?

  Did you move all the music files recently?

  Check that the music you are trying to synchronize are playable, if they are not, check their location of file to see if they are still there. You may need to re - add to the library.

  The following may be useful: http://support.microsoft.com/mats/windows_media_player_diagnostic

• my windows media player won't let me play movies or download them.i cannot find a way to solve this problem.

  I use vista home 64.eu if I try to use another media player you need on my entire system. I hope someone can help me.thanks.

  Hi Kathy,

  What happens when you try to play or download them? Nothing at all? You get an error message? If what makes say exactly Word for word including all codes? What version of WMP are you using?

  Despite your comment about other media players "support for the entire system" (what means exactly what it means and what other media players are helps you - names and versions)?, I would suggest you download and try free VLC Media Player: http://vlc-media-player.en.softonic.com/.  He helped a lot of people with problems WMP.

  If it does not or you do not want to use a different media player, so you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.vistax64.com/tutorials/76905-system-restore-how.html.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  I hope this helps.

  Good luck!

• Windows Media Player won't let me rip a CD, the error message indicates that they cannot find the file

  Is watching the guys, I think not that this is a 7 days without some kind of sleep problem, but I can't work out why Windows Media Player 12 will not rip a CD I put it in, I get an error message saying that Windows Media Player cannot find the file I'm tearing and maybe it is moved renamed or deleated in the meantime that my CD is in the CD/DVD drive waiting to be fooled on my laptop Windows 7 64-bit. I ripped the CD loads before but I had to reinstall a complete a month ago, and this is the first time I tried to extract anything on my laptop. If anybodys got any ideas on how to solve this problem, my inner peace would be much more peaceful MCE! Cheers and Happy New Year to the United Kingdom, I wish you a good and peaceful 2014.  Rich.T

  Hi Rich!

  This might help: http://www.fixkb.com/2010/07/when-ripping-musing-with-media-player.html

  See you soon
  Julia

• XP Media Player won't burn CDs

  I have Windows XP PRO, and most of the time, I like the formats. My problem with Windows Media Player, is that no matter what I do, it won't let me burn a cd. I was getting the message "database is corrupt" and followed the instructions to fix this, and it worked. Now the database is ok, and it still won't let me burn CD. Any help would be appreciated!

  Hello

  1. have you installed any third party burning software?

  2. do you receive an error message when burning the disc?

  3 have you tried using different disks?

  4 have had any changes made to the computer before the show?

  Please follow the methods and check if it works very well.

  Method 1:

  Follow the steps in the link.

  How to troubleshoot problems that occur when you copy data on a CD - R or CD - RW optical disc in Windows XP
  http://support.Microsoft.com/kb/324129

  See also:
  How to copy information to a CD in Windows XP
  http://support.Microsoft.com/kb/306524

  Method 2:

  Follow the steps in the link.

  How to troubleshoot Audio CD creation in Windows Media for Windows XP player
  http://support.Microsoft.com/kb/306319

• Windows media player won't recognize that my cd/dvd burner, so will not burn anything even if during 3 years, until now

  Windows Vista operated computer that has worked well so far, now Winsows Media Player does not recognize my burner. Tried to do the upadting for my burner,

  but said that everything is up to date, can someone help me?

  Hello

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  This troubleshooting could not help if there is alignment and/or wear issues however it
  a shot.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• What is error C00D1197 in windows media player when you try to burn a CD.?

  What is error C00D1197 in windows media player when you try to burn a CD.?

  Hello

  These should help:

  WMP - C00D1197
  http://Windows.Microsoft.com/en-us/Windows7/C00D1197

  Windows Media Player Error Message help
  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5145&ID=C00D1197&ContextId=71&OriginalID=80070002

  Also check this KB which could apply to other versions of WMP
  http://support.Microsoft.com/kb/834483

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• My Media Player is not let him come his pass. I tired FixIt and followed all the links there and I still can't get media player to read.

  My Media Player is not let him come his pass. I tired FixIt and followed all the links there and I still can't get media player to read suggestions?
  original title: Windows Audio recording

  Hello

  (1) what version of the Windows operating system is installed on your computer?

  (2) did you of recent changes to the computer before the show?

  (3) what is the file format of the files you are trying to play?

  (4) you get an error message?

  (5) you are able to hear the sound of Windows and other applications?

  (6) that Microsoft Fixit ran?

  You can try the following methods and check if it helps.

   

  Method 1: No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

   

  Method 2: Problems running Windows Media Player

  Open the troubleshooting Windows Media Player settings Troubleshooter by clicking the Start button, then Control Panel. In the search box, type Troubleshooting, and then click Troubleshooting. Click view all, and then click the Windows Media Player settings.

  See this link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 3: Solving problems run Windows Media Player library

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter

• Windows Media Player won't play the .zip files. How to see or play these files?

  Media Player

  Windows Media Player won't play the .zip files. How to see or play these files? I'm 67 and not tech savvy thanks for the help.

  Hello

  ZIP files are compressed, so you need to unzip and then play the content if the
  content is of type WMP files.

  Compress and uncompress files (zip files)
  http://Windows.Microsoft.com/en-GB/Windows7/compress-and-uncompress-files-ZIP-files

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Serious CD - r media player won't play in my CD player

  The CD I burned media player will not play in my CDR compatible CD player.  I had success in the past with my CD player, but now they will not play in my CD player.  Yes, the CD drive is compatible with the CD - Rs.  I use this system to work much as a music teacher and I really need to burn several CDs for a class that I teach on Saturday.  Heeellpp!

  Hi, Rascaro,

  Did you use regular CD or CD - RW discs?  Regular use for traditional players such as auto or hifi cd player, etc...

  Have you burned the CD in the form of data?

  The tab burn in your software, make sure you have checked that Audio CDs not data Cd

  My burned music Cd will not play.

  http://www.ehow.com/how_7838523_burned-music-CD-wont-play.html

  Burn a CD or DVD in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player

  Change settings for burning a CD or DVD in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-settings-for-burning-a-CD-or-DVD-in-Windows-Media-Player

  CD burning without problem

  http://www.freeopenbook.com/win-XP-Hacks/CHP-10-sect-3.html#CHP-10-fig-3

• Windows Media Player won't rip CD more. I put it in MP3 format. I get the COOD1OD2 error message.

  Windows Media Player won't rip CD more. I put it in MP3 format. I get the COOD1OD2 error message, and by virtue of the clarification it indicates that the error message is COODOFBO which says that the setting of the CD in Device Manager do not match parameter of cd in the drive. I use to be able to rip the CD months ago. I just upgraded to WMP 11 because the sansa clip has not been recognized and updated WMP. How can I fix this.

  Thank you

  Chemtech111

  original title: don't rip CD in WMP

  Format Factory free software is good for ripping
  Music CD.  It might be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup295.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)
  (Windows XP / Vista / 7)

  Format Factory - the easiest way to convert CD to MP3
  http://www.thesimplest.NET/PC/simplest-way-convert-CD-MP3
  (scroll to the bottom and start: ("1) Start Format Factory")

• my windows media player will not let me update my imformation media

  my windows media player will not let me update my song information after a windows update

  Come and find that my pc was missing some updates

• Windows Media Player won't start!

  My media player won't start. He made over the years, but not today.

  EU in my taskbar and I can play but I can't maximize it upward on my screen.
  No idea why?
  JOH.

  Hi JOH,.

  I suggest you to see the links and check.

  http://support.Microsoft.com/mats/windows_media_player_diagnostic

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/getting-started-with-Windows-Media-Player

  I hope this helps.