MediaCreationToolx64 didn't create the ISO, updated November

Similar Questions

• Unable to create the support updating with key

  Hello Dominic,.

  I have a key of Windows 8, but not 8.1 key. I upgraded to 8.1 of the store, so I'm not able to create the support updating with the key I. Should which option I now?

  Thank you & good day,

  Ajay

  Split from: this thread

  Hello Dominic,.

  Thanks for your reply, appreciate the time taken by us keep up to date on the State of the question.

  You will need a Windows 8.1 product key in order to create a refresh on your computer Windows 8.1 support. You can activate your Windows 8.1 with your product key Windows 8 operating system after upgrade, but to create refresh media, you need a product key Windows 8.1.

  I recommend you to contact our phone support, our technical support engineers can help you in the creation of a support of refreshment with a key demonstration Windows 8.1.

  http://support.Microsoft.com/contactus/?ln=en-us

  Hope this information is useful. Feel free to write us again if you have any further questions or for any further assistance, we will be happy to help you.

• I'm seeing a class at the University on the program line in my iPad. The file says: index.htm, I went to University and they said that Adobe didn't create the form of FRO us to see this kind of presentations on the iPad or the iPhone. The presentation I h

  I'm seeing a class at the University on the program line in my iPad. The file says: index.htm, I went to University and they said that Adobe didn't create the plug in for us to see this kind of presentations on the iPad or the iPhone. The presentation is in PowerPoint.

  is it possible...

  I am a student of the line and we assume that we could use our currencies everywhere.

  can you give me an and

  Thank you

  Carola

  PowerPoint is a microsoft program and ms and adobe are not the same companies and do not have the same products.

  That said, your class probably uses an adobe product and probably displays a swf file.  the reason why you cannot view SWFs on ios devices is a matter of apple.  Apple won't allow flash on their devices player.

  use a computer with a web browser or a mobile android.  or look over the shoulder of someone who has one of these.

• How to create the ISO image of windows 8 with the help of boot, efi, sources, and support files

  Hello
  I followed folders in my USB key:

  Boot
  EFI
  Sources
  Support,

  and the following files:

  Setup
  Bootmgr.EFI
  Bootmgr

  How can I create an ISO image of windows 8 with the help of these files and folders. I even installed ADK, but I couldn't keep up with it.
  I would be very grateful if someone could help me out here.

  Secondly, I would also like to know how to create a system image of WINDOWS 8, where the hard drive breaks down.

  Concerning
  MAK

  If you have the upgrade key, go here

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  You can go for the use of win8 / win7 / vista to match highlights you want - and download the win8 installation and run the installation with your key to download you need to install windows from that.  Will allow you to have an iso bootable.

  Make a picture of the control panel system / Windows 7 file recovery / system Image.  I certainly wouldn't put it on dvd.  It will be too.   Find an old preference portable hard drive and buy a $ 20 usb box, get an external hard drive.

• Windows Update problem. "Windows didn't start the Windows Update service on Local computer." Error 1067: the process ended unexpectedly. »

  I have a problem with windows update. When I try to start the windows update service, I get this, "Windows could not start the Windows Update service on Local computer. Error 1067: The process ended unexpectedly. I also see this in the event viewer.

  Log name: Application

  Source: Application error

  Date: 21/07/2012 10:40:20

  Event ID: 1005

  Task category: (100)

  Level: error

  Keywords: Classic

  Description:

  Windows cannot access the C:\Windows\System32\wuaueng.dll file for one of the following reasons: there is a problem with the network connection, the file is stored on the disc or the storage drivers installed on this computer. or the drive is missing.  Windows has closed the program host process for Windows Services because of this error.

  Program: For the Windows service host process

  File: C:\Windows\System32\wuaueng.dll

  Tried regsvr32 c:\windows\system32\wuaueng.dll and got "the"C:\windows\system32\wuaueng.dll"module has been loaded but the call to DllRegisterServer failed with error code 0x80004005.

   

  SOLVED!

  Hello

  Follow these methods.

  Method 1: Try to re - register the file c:\windows\system32\wuaueng.dll

  To save the c:\windows\system32\wuaueng.dll file, follow these steps:

  a. click Start, type run.

  b. now, tin the window run, type regsvr32 c:\windows\system32\wuaueng.dll and then click OK.

  c. When you receive the following message appears, click OK:

  DllRegisterServer in successful c:\windows\system32\wuaueng.dll.

   

   Method 2: If this does not help, you can reset Windows update components and check.
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

• I didn't miss the Windows updates the following... Please help. KB2288621 (MS 2007 Office System), KB2277947 (MS 2007 Office System), KB2251419 (MS Office Word 2007), KB2092914 (MS Works 9).

  Have permanently an error when you try to run these updates.  I tried to update each of them at a time and have failed at each.

  Please advise... Thank you.

  A KB was created for 646 error code that appears during the installation of the updates of Microsoft Office. The KB includes an automatedMicrosoft fix 50461 that corrects the problem. Look at the following KB:http://support.microsoft.com/kb/2258121>

  Please let us know if that helps.

• PowerEdge 2850 - How can I join the ISO from Dell (v.6.5.0) all files?

  Hello

  I downloaded the Dell DVD ISO - Dell Systems Management Tools and Documentation, v.6.5.0, A01 files

  OM_6.5.0_SMTD_A01. ISO.001 and OM_6.5.0_SMTD_A01.iso.002

  but can't seem to find instructions on how to make a large ISO file.

  Help would be appreciated. Thanks Andrew

  Instructions are on the download page for each ISO, under the Instructions of Installation image:

  After downloading all the segments of the file, run the following command to create the ISO file:

  Copy /b OM * OM_6.5.0_SMTD_A01.iso [Windows]

  Note: If the generic format above does not bring the segments of the file in the right order, run the following command instead to create the ISO file:

  copy/b OM_6.5.0_SMTD_A01.iso.001 + OM_6.5.0_SMTD_A01.iso.002 OM_6.5.0_SMTD_A01.iso [Windows]

  Use your DVD burning software to create a DVD from OM_6.5.0_SMTD_A01.iso.

• Wizard Boot Camp invites not to create the Windows ISO

  Hi all.

  I have a new MacBook Pro (15-inch, mid-2015 retina) with El Capitan 10.11.3 (15 d 21) installed and fully updated. I'm trying to use Boot Camp to install Windows 10, how ever when I load the Boot Camp, he goes to the option to partition disk and wonder where the ISO file is located, but it never gives me the ability to create a Windows ISO on my USB key as did previous versions of Boot Camp.

  Don't know not what Im doing wrong here, but it doesn't recognize it even with the version I have all my ISO files even when they have been downloaded from the Web Microsoft MSDN site as when I click on continue after that point to the ISO file, I get an error message saying "Boot Camp only supports installation of 8 or a later version of Windows 64 bit on this platform." Please use an ISO for 64-bit Windows 8 or later installation file. "I get it despite trying everything I have or do.

  My version of boot Camp is Version 6.0.1 (522)

  BootCamp does not create the Windows ISO, he asks, you will need to provide it.

• Downloaded SP3 of XP on a USB to update XP computer without internet connection, computer, failed to read the iso file?

  I downloaded the SP3 of XP on a USB to update an XP computer that is not connected to the internet.  The computer cannot read the file, any suggestions on a download that will help you... the file is a. ISO file

  Hello

  Install SP3 by downloading and running from...

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24

  You can ignore the text which says that it is for network installations and also ignore the text informing Windows/Microsoft Update If a single update of a PC.

  It is an executable file (.exe) that must just run and install, i.e., it is not an iso file that will be used to create a CD which included the executable.

  Just like the iso file, it can be saved to a Flash DRIVE on another PC before running on the PC to update.

  So try and get up-to-date with the Windows updates.

  Tricky

• Apple created a new update ios for the iphone 4

  IPhone 4 stuck in ios 7.1.2. Ios need 8

  Apple created a new update ios for the iphone 4?

  No, they won't. If you use a later version of the iOS, then you will need to buy a new phone.

• TB 31.5.0 Win 7 after the TAB key for the automatic update no longer creates new address line "write" (enter the done key) but I want the TAB key! Why this keep happening after

  TB 31.5.0 Win 7 after the TAB key for the automatic update no longer creates new address line "write" (enter the done key) but I want the TAB key! Why is - this seems to happen after each automatic update? Cant we get 'option' to use the TAB key to navigate through the lines of address "write"?

  TAB through the fields that exist. It is the function of the TAB.

  Otherwise you could never use TAB to go out in a field for example: subject. It would create an indefinate number of fields and are unable to function as a TAB key.

  TAB does not back to THE fields,
  New crests to THE fields or donkey typing/selection enter/return address, you can use the selection of mouse click.

• "file > create new version" missing in the latest update to iTunes

  I used to use the Menu command file > create new version to convert the movies so that they will play on my 1st gen iPad. (The fact that he made them smaller was an added bonus).

  This function seems to be missing or moved in the last update. In its place is a Spartan function convert . If you hold down the option key, you can select «Convert to AAC...» ' which is useful in its own way, but what I'm looking for.

  Does anyone have an idea where the conversion of film went?

  Apple dropped this feature in the last update, because they think classic iPod is obsolete. But you can use the Handbrake or Apple Compressor to do the same job and then mark the files using MetaX or MetaZ, works for my 8th generation iPod classic.

• The .iso file I created with the Windows DVD 7 Professional 32 64 BIT is not installed using BootCamp because it says that it requires a 64 BIT .iso?

  Hello

  I try to have a system dual boot on a 2012 end iMac 27 inches with Intel i7 under OS X El Capitan v10.11.4 who had replaced running Fusion HD. I created files .iso files to both a .cdr WIndows 7 all-in-one 32/64 BIT DVD and a DVD from 32 to 64 BITS of Windows 7 Professionaland also downloaded the BootCamp5.1.5621 drivers. I created the files .iso on a USB disk ejector WD Passport 160 GB ATA. When I try to use BootCamp to create a WIndows 7 install disk from the selected .iso files, it is said that this version is not 64-BIT and it requires 64-BIT install on my iMac. What Bootcamp, look in the files of la.cdr/.iso it determines that it is not 64 bit?

  Please use your product key and download an ISO only 64 bits from https://www.microsoft.com/en-us/software-download/windows7 and place it in your Documents folder. Find a 8 + GB USB Flash drive, which will be in the format / erased by BCA. Run BCA and use the option create USB Installer (it should automatically check the software download option). When you are prompted, point to the ISO. This installer from USB can be used repeatedly.

  El Capitan will create Setup with BC6 USB drivers. Please follow install Windows 7 and previous versions on your Mac with Boot Camp - Apple Support and follow steps 1 through 16 in the Windows 7 installation section. Pay attention to step 11 in particular.

• partition created but empty how to restart windows installation of the ISO file?

  Hello

  I partitioned the drive using bootcamp but I didn't have the product key to the House. So I had to cancel Setup to reinstall later.

  So now I have the product key. Partition is ready to be installed. So what to do now? Can someone help me with this?

  Thanks in advance.

  FIRAT

  MacBook Pro with the retina, OS X El Capitan (10.11.3)

  1. in what year is your MBP?

  2. what version of Windows?

  3. do you have a USB installer created?

• After the last update of the operating system and iMovie it seems I can't create a movie in the PAL standard. Can anyone help?

  After the last update of the operating system and iMovie it seems I can't create a movie in the PAL standard. Can anyone help?

  NTSC and PAL are analog standards and don't apply to the share or export settings in iMovie.

  It creates the same FPS and dimensions as your source file.

  What you trying to create?