Similar Questions

• Sony Mediago installation problems

  I recently bought a Sony Walkman.  Downloaded the Walkman guide successfully since the walkman via USB connection.  But had problems with Media go. I called the hotline and gave the link to download from the internet.  I managed to download, but not install.  The Green install bar fills almost immediately (while it is generally quite progressive - in line with the speed of installation).  And as he goes.  I tried several times and come back later quite awhile to my laptop and the situation does not change.  The taskbar is always 'unpacking '!  If I try and cancel, I can't - the 'installation' process is frozen.  The only way out is to close my computer, which takes more time than usual "installation" something is slowing the process.  I'm not IT savvy, know although a bit. I have run scans and don't seem to have any virus etc. Can someone help?  My OS is Windows XP, SP2.

  I googled how to check for errors in Event Viewer.  I got to the event viewer, but as I said, I'm not IT savvy and don't know how to interpret the data.

  I know how to do the little control panel and don't see listed mediago.

  I already have the link that you gave me.

  No doubt I should be able to download a program of good reputation without disabling the AV etc?  I'm afraid to do something stupid!

  The last suggestion - I don't know how to do.  First, it is said to add the installation of applications on desktop - where I would find it.

  I checked with Sony and the walkman is compatible with Windows vista.  The packaging says Vista SP1, even if I have SP2.  This would necessarily make a difference in low load capacity...

  I am grateful for your advice, but it might be better to stop there?  I think I need more IT experience to benefit from your help!.

  Sorry,

  This shows how to use Event Viewer

  http://www.bleepingcomputer.com/forums/topic40108.html

  When you open the event viewer

  Click on the > next to Windows logs

  Click on the > next to the Application log

  In the lower center pane, you will see a general tab and a Details tab

  Error will result in a message in the lower window as well as

  The journal name

  Source

  Event ID

  Event log online help link

  You must select the error that coincided with the approximate time that you are trying to install Mediago.  Click on the details tab which can have Mediago listed in the details of the error.

  Repeat installation Mediago, then open the event viewer if the installation fails.  Error should show immediately in Application or log files

  Sometimes the AV software and firewalls interfere with download / install.  Deactivation will be during the time it takes to install the application.  If you save it on the desktop, your software can have a scan option in your right click menu.

  Right click on the file that you saved and select ' scan this file. "

  It will determine if the file is safe

  When you click Download, you should be able to select Save as

  A window will open and you can Browse and select Office to save the download to

  See the illustration

  http://www.cod.edu/people/faculty/grantm/dsktopsave.htm

  The file will be there until you double-click it to execute an installation process

  Service Packs should not question

• My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

  My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

  Hello brooksm549,
  Thank you for using communities of Apple Support.

  I got your message which, since updating your iPhone 6 to iOS 10.0.2 your iPhone stops when it is 40% and the power to empty very quickly. I understand your concern with the iPhone turn off and drains the battery. I recommend you to review the use of the battery to see what app contributes more to the battery drain. The following article will provide you with steps on how to check the use of the battery:

  On the use of the battery on your iPhone, iPad and iPod touch

  When you know about the soft uses more battery, you can change your settings in order to optimize the battery life:

  Maximize the life of the battery and battery life

  Best regards.

• App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  After upgrade 'OS X El Capitan' to "macOS Sierra" window only empty "App store" and page "Safari" made its appearance, no error message shows. store "iTunes" and "Dictionary" does not connect too.

  But Google chrome works well.

  So have you tried the next steps in your original post that Safari does not work after installing macOS Sierra:

  (1) x OS: "Unable to connect" or "unable to connect to the App Store. An internet connection is required"- Apple Support

  2) Advanced the steps to correct the problems with the iTunes Store - Apple Support connection

• My App Store did not work... When I try to update or install apps it does not work. Can you please fix this?

  Can you please fix the problem? Appstore cannot update or install apps... App Store not worked yesterday.

  We cannot solve a problem for you, but we can make suggestions of troubleshooting...

  Have you tried restarting your iPhone yet?

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

• Safari does not work after installing macOS Sierra

  Safari and apple store does not work after installing macOS Sierra

  Alas, my crystal ball is in the shop for cleaning, so you will need to provide more details on what "doesn't work" and above all error messages. First of all, let's start the App Store. Provide as much information as possible for those of us who do not sit on your shoulder.

• How to restore a security entrancecode that was not installed by updating to ios10?

  Work with the 5s iphone I recently could update to ios10. I did it during the evening. In the morning, I was told the update required an entrycode that was not installed.

  I use an entrycode before this and the same works after that.

  No longer is my ability to import on my Imac out of the photo on my iphone, it says in Iphoto: cannot import as device is held by entrancecode, you need to unlock the device to import the photo.

  My unlock does not work. I tried to connect to itunes, tried to reset, but so far nothing works.

  What can I do?

  Hello

  Go to settings touch id & password if you can't do this support.apple.com contact

  See you soon

  Brian

• Need to install Java command line tool

  

  I get this error after the installation of the new OS sierra. Java is up to date. How can I fix it?  Thank you.

  The most likely cause is the program that wants to use Java's only request the use of Apple legacy Java 6. That the developers didn't like enough to have use Java the right way, you need to install Apple legacy Java 6 or uninstall the program that wants to use Java - likely produced Adobe or a Facebook video chat program.

  Download Java for OS X 2015-001

  Maybe it's that the program requires a JDK be installed instead the JRE from Java.com. So, if you download the SDK Java Oracle of Oracle's Web site, then you might try that if you have a recent version of Java. However, I don't think I've seen someone declare that as successful as the program who need Java so poorly designed.

• iPhone 6 problem after installing IOS 10.0.2 - phone app keeps freezing for 30 seconds

  After installing IOS 10.0.2 on my iPhone 6, the phone app keeps freezing when I open it and remains frozen for about 30 seconds.  Then it closes its doors.  Then only can open and use the phone/directory.  Does anyone else have this problem?

  My husband and my phone do the same thing. We are constantly reset. Very frustrating!

• I can not install app purchased in ios 10

  I can't uninstall an app purchase (no current app) in ios 10

  You want to install an application or uninstall?  Your title and your post show different things.

• registered e-mails lost when I installed sierra

  I installed sierra this morning and that you do not have boxes of saved e-mails that were on my mac mailbox. I guess I'm not the only when I saw others when Googling this issue.

  This is the Mac Pro desktop forum, I asked that your post moved to the Sierra forum

  macOS Sierra

  What type of e-mail account? Exchange/IMAP or POP3?

  What version of Mac OS updated you go?

• Cannot install Sierra because updating Photos at a standstill

  Apparently, the new Sierra OS included an update of Photos.  Started Photos updated first, it worked for ~ 30hours 'building a library '.  Tried to complete installation of Sierra, which requires a reboot - of course all Apps must close to restart, pictures will not close because the library construction!  But now the small progress whirly ball is not swirling and there is no options in the Photos menu-all gray, Photos Version 1.0.1 (215.65.0).  I'm afraid force quit closing snack takes pictures of my 16000 images with it.  Have they the time machine upwards.

  Should I force Quits Photos and install the Sierra, then restart photos or is there something else to do?

  I'm confused by the title of your topic, then the body of your message.  Did you install Sierra?  Or are you trying to rebuild your current photo library with your current Photos app before moving on to the Sierra? Photo is part of the upgrade of the Sierra and cannot prevent the installation of Sierra.

  What is your library?  If it is very large that this moment may be offline.  It is small and because you have a TM backup go and force quit Photos.

  Where is your library?  If it's on an external hard drive that is how HD formatted and connected to your Mac?

  

• How to install windows 8 or 7 Sierra?

  Tried to install 7 or 8, since the installation of sierra what it messed my partitions where bootcamp windows 10, but now had to work I have to use an old Olympus Studio tool for project work/uni which works only on windows 7.

  It seems that apple has control over what you do on a machine and the system I have invested important sums of money in. Very close to sale until the installation of all mac and return to windows. El Capitan was buggy on my machine before and cling endlessly.

  installs Windows 7 is not fully supported in Sierra bootcamp

  http://www.Apple.com/support/Bootcamp/getstarted/

  Install Windows 7 and earlier Apple Support on your Mac using Boot Camp -

  MS dropped support for Win 7.

• Sierra of downloaded OS but have not installed. What should I do now?

  I downloaded macOS Sierra, but it has not installed. I rebooted the MacBook Air without success. What should I do now to get installed it.

  Download and installation are separate steps. You should be able to find 'Install macOS Sierra' in your Applications folder. Double-click it to start the installation. It would really be a good idea to first make a backup complete and bootable.

• Cannot install itunes, iCloud for Windows

  I tried to update iTunes for Windows, and then uninstall it and then install again iTunes and iCloud for Windows, but I can't do any. I'm mainly getting the security file error when I try both uninstall and reinstall. Works fine on my laptop, but not in my office. I've recently updated to version 10 of Windows Home 1607, build 144393.222 - don't know if that has anything to do with the problem.

  Follow the suggestions If you can't install or update iTunes for Windows - Apple Support