MediaSmart Photo and Webcam does not not on HP Pavilion dm1-2150so with Windows 7

Similar Questions

• I am trying to open raw photos and it does not work I have 6 suites and photos taken on a Canon EOS Rebel SL1 creative

  I am trying to open raw photos and it does not work I have 6 suites and photos taken on a Canon EOS Rebel SL1 creative

  Hi irod,.

  Greetings.

  • Latest version of camera raw for CS 6 is 9.1
  • Check now if your camera is to 9.1 or higher
    • Devices supported by Adobe Camera Raw
  • If requires 9.2 or later, then you should switch to PS CC or use the dng converter
  • But if it is support less 9.1 then use this link to install camera aw 9.1 and then try to open pictures
    • Plugin Raw camera setup
  • If still you have questions then please paste a screenshot of the issue in more detail.

  Concerning

  Rohit

• I have photoshop elements 13 on disc, but for some reason, it does not load on the new computer with windows 10 can you help me?

  I have photoshop elements 13, but it does not load on my new computer with windows 10 can help you?

  Copy the contents of the drive in a desktop folder and install from this directory.

  If this fails, explain what you see while trying to install.

• Wireless mouse does not. HP Pavilion dv7-2770us, running windows 7.

  Bought a new mouse and still does not work.  Tried using a different USB port.  Windows gave me a problem code 43.   I tried troubleshooting with Logitech and it did not find the wireless mouse.  Any ideas of what is my problem?

  The problem has been resolved. It was the USB ports that were not working. Disconnected from the computer laptop for a while and then reconnected and all works well.

• No sound from headset and webcam does not start

  original title: headset and webcam.

  When I start my webcam window does not appear to not allowing no not another friend to view my webcam. How to configure to make it work as it should. Hercules webcam.

  Then when I plug in my headset no sound is heard. The button is not muted and the volume is at full capacity. I tried to put nothing works, and the driver works. How to configure it to allow it work correctly. Logitech headset.

  Hi freddychin,

  1. all these latest changes on the computer?

  2. is the web camera detected by windows?

  3. what web camera program do you use?

  4. are you unable to hear the sound with the headset?

  First connect the headset to the USB port or another computer and check if it works.

  See the link below to see the manual for the web camera know how to configure it.

  http://TS.Hercules.com/eng/index.php?PG=files_faq

  Check out the link to the Web from Logitech site and try the steps mentioned only if the helmet works on another computer below.

  http://forums.Logitech.com/T5/Internet-headsets-phones-read/Vista-SP-1-disables-Logitech-USB-headphones/TD-p/220543

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Adobe Flash Player 10.3 does not work on my computer - HP with windows Vista Home Premium 32 bit and Internet Explorer 9.0 32-bit

  When I load Adobe Flash Player 10.3 he says he has successfully installed, but if you go in Panel, programs and features, it shows Adobe Flash Player 10 Active x, the date of installation, but the size of the file is empty. Also in the internet Options tag program, manage add-ons, as it does not appear. I removed Adobe Flash player and tried to download again - same results.

  Hello
  • What were the changes made before the show?
  • How long have you been faced with this problem?
  You can check this link:
  
  http://kb2.Adobe.com/CPS/191/tn_19166.html
   

• Responsive HTML5 with mergedprojects, creates a hyperlink to a file in the project html parent to a child html file and it does not work! The child has with the parent TOC, but need to tie. Help, please!

  Hi group!

  I have a brilliant parent project that serves as a springboard for other projects. Users click a component of software they want and are redirected to a page with a list of all the documentation available for this component. Click on the name of a document and access - a lot of PDF files. BUT I also wish they were able to tie the online help for the component. After having read up on the link through / between projects, I knew that I needed to create a parent project (for the page intro and links brilliant) and projects for children (for software components).

  THEN

  I created a parent sensitive HTML5 project and the projects of two children. I compiled the parent to create mergedprojects files, and then open the projects children and collected to the appropriate mergedprojects folder. I then created a hyperlink to the file list html documentation in the project parent towards the child file software component html (output folder and start page [which is the same as the default theme]) and the link does not work! The child and its table of contents appears in the parent TOC so topics are here, but I can't link to them. If necessary, I can send screenshots.

  Where I am dorking this place?

  Thanks in advance for your time and help!

  Scottie 'needs help' gear

  What is your relationship like? And how did you create the link?

  A typical reactive merged help is structured as follows:

  index.htm (Master home page)

  mergedProjects

  childName

  index.htm (starting page for child)

  A child from the index.htm page link would look like this:... /... index.htm

  Kind regards

  Willam

• Family safety does not work on a new laptop with windows 8 preinstalled

  Hello, I previously used Family Safety (FS) on my daughters netbook and it worked very well. I took my cell phone account that she does not have an account on. So for Christmas we he bought a new laptop (win8) of full size. I created myself as the admin, and him as a standard user with a different username than its netbook, and I configured FS for the new account on the new laptop. Well, I am not sure if more FS works on the netbook, but I am sure that it does not work on the new laptop to 100%. I tried over and over reconfiguring, sometimes it won't save even my applications updated. It simply doesn't get it. The only thing I can think is that, in the implementation of his account, it doesn't have an e-mail address, and I was forced to create a local account. Could it done than the FS functionality?

  Hi, I had family security to work by removing the local account that I wanted to monitor and adjust it upward with a hotmail instead of just local account. Family safety has started working immediately and exactly as expected. I always think that theres a problem when people are trying to implement local accounts. Thank you for trying to help me in any case, if I need help in the future I will contact you guys once again.

• MediaSmart Photo/video/music does not load in Win7

  I almost can't wait to submit this.  The thread that applies, but after 5 months no response, I saw.

  The Support Agent HP said I needed a new version of the MediaSmart MVP.  Tried several times, it failed with no error report.

  Contacted a real HP AE, he told me to remove MVP and install sp47676.exe.  I did, it failed, now I have no MVP at all, just the links in the bar.

  Must be 6 or 7 different versions, I tried sp44642.exe and sp44615.exe.  Error 259 on the installation.  I can try to restore but do not know what other download I lose.

  Does anyone know the * good * version of software to download?  These are not small, 160 at 324 m.

  I am on Windows 7, 64 bit, HP installed at the factory.  e9270t quad, 8 G.  Only a few months.

  MediaSmart DVD installed new version without problem

  Help!

  Thanks for the info.  sp44429 did load it for me, I have Blue Ray but no HP, third party add in.

  I think it could have been Norton, I don't know.  The above charge.  After what Deputy support told me that I had to update.  Again I turned off Norton, and he did load.  So I don't know if it was Norton or if the first recharge solved the problem.  The confounding factor that the version number has not changed on MediaSmart, so I don't know really not what has been fixed.

  I wish really that:

  1) there are a few newspapers or something error.  Very little info has been given, just that SA said that it would not load.

  (2) some correlation between SP444xxx and the software.  All the research my HP has not turned upward from these figures, I had to find them through these forums.  Also put this number in the software.  What is 3.0.3228 version, sp what.

  (3) if Norton is a problem, I hope SA turns off what it takes it to load.

  (4) when I go to e9270t page, nothing of this software is listed.  A search of better engines or some info what software I need to load.

  So the problem is solved, unfortunately I do not know quite what the fix was.  Probably a new facility with Norton turn off.  Just hope it doesn't happen.

• HP-101 webcam does not; After I updated its os to windows 7 (64 bit) to windows 8 (64-bit).

  I urgently need my webcam this week for a place of encounter of the celebrity, and I'm upset.
  I tried several measures then 15 and already spent a day on same; Please if anyone can help me through teamviewer; I'll give him some good buys online and owe him a big hug.

  Here is my pc name and number-
  HP Pavilion Notebook PC g6
  LP235EA #ACB

  All the drivers are updated

  the cam is nt shown under imaging devices; He has appeared in other devices Port_ #0005.Hub_ #0004

  Please msg me; If anyone can help me through teamviewer; Please

  hard reset, running on cmd, uninstalling the driver, analysis of material changes in the imaging devices, then reinstall etc etc; I've tried everything

  Here I found the solution at last
  http://h30434.www3.HP.com/T5/hardware-upgrades-replacements/HP-101-webcam-not-working-after-i-updated-OS-it-from-Windows/m-p/2732469#M21848

• Fresh install on Bootcamp does not properly look book on Mac with windows 8

  the Apple Store in shanghai recently reinstalled Bootcamp and Microsoft office.  I didn't check it before you leave the store and won't come back for two weeks but discovered a few problems I hope to be able to stare at me.

  The speakers do not work, and it seems that the drivers are not up to this day somehow.  also, I can see ms is listed in the programs being installed, but there are no apps for it on the desktop computer or another screen that windows 8 comes with.  Not sure what other screen is called but looks like an iPad.

  Can someone give me a link to update the audio drivers and tell me how to find ms office? Am in ningbo China and no one in the Apple Store it includes English Windows and I really don't want to wait two weeks before returning to shanghai.

  Satisfaction on the work in advance.  :-)

  the Apple Store in shanghai recently reinstalled Bootcamp and Microsoft office.  I didn't check it before you leave the store and won't come back for two weeks but discovered a few problems I hope to be able to stare at me.

  The speakers do not work, and it seems that the drivers are not up to this day somehow.

  You can try to download the latest version of the Boot Camp software which includes the latest available drivers:

  https://support.Apple.com/kb/DL1720?locale=en_US

  also, I can see ms is listed in the programs being installed, but there are no apps for it on the desktop computer or another screen that windows 8 comes with.

  See: How find all your Microsoft Office apps and more... 

  Not sure what other screen is called but looks like an iPad.

  Can someone give me a link to update the audio drivers and tell me how to find ms office?

  See https://support.Apple.com/kb/DL1720?locale=en_US

  Am in ningbo China and no one in the Apple Store it includes English Windows and I really don't want to wait two weeks before returning to shanghai.

  Satisfaction on the work in advance.  :-)

• Webcam does not work with the Dell Webcam Central software

  My videos with the extension Bup, IFO and VOB does not play

  My computer came with Windows XP and Dell sent me the CD of Vista to install Vista. With XP my Webcam would now work with vista my Webcam Central will recognize not my built in webcam. My web cam works simply with Webcam Central. I uninstalled the Webcam Central software and reinstalled it but nothing has worked so far.

  Hello

  Step 1: Try the steps outlined in the article below and check out them.
  http://support.Dell.com/support/topics/global.aspx/support/DSN/document?c=us&CS=04&l=en&s=BSD&docid=783CEDEE4C48A2CFE040AE0AB8E119D6

  Step 2: If you still face the same problem then, I would recommend you contact Dell support team to check if the webcam is compatible with windows vista.

  http://en.community.Dell.com/support-forums/default.aspx
  http://support.Dell.com/
  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Satellite L350 - Webcam does not work, BUT NOW IT DOES

  Hi all

  Very recently, I bought a L350 pre-installed
  On the first day of use then the webcam does not work

  I always get a window with the header "HELL."
  The text: "webcam driver open fail. Please restart camera or computer.
  All you can do is to click on an "OK" button to close the window and that is it!

  Any help to solve this problem with is welcome...

  Thanks in advance

  I HAVE THE SOLUTION!

  Just update the driver, I got the version 6.0.6001.18000 from 21/06/06
  After update: version 6.2.238.214 02/14/08

  The webcam works!

  How early?

  Start--> Panel--> System-->--> Imagedevices--> Chicony USB2.0 device--> use tab Manager driver--> updated... Windows Vista looks like an update, believes that it is and install...
  And the thing doesn't work!

  Hope I was of any help

  Post edited by: mvereecken

  Here in the forum are already discussing this issue.
  A user named Akuma posted an interesting solution to this problem then try it. Maybe it will help you.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=136549

  In addition it could be useful too:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=154131

• Satellite C855-1GF - webcam does not work

  Hello

  I need help how do I get my webcam back to work, I checked on Device Manager and the imaging device is no longer on the list. I also did a system restore it does not always think that he could will to help save the lost files that has disabled the webcam application.

  Can someone help me pls?
  How to solve this problem?
  Thank you!

  Stand by. You have installed recovery image again and webcam does not work with the factory settings, right?

• I opened a photo in an excerpt from my email and it does not close

  I sent pictures to my email, so I could record in the photos from iPhoto app did not work. In the middle of my project. I opened an image in the preview to save and it will not save or close. It shows just running and running. How can I force it to close?

  I am trying to install the update for my software, but this application is not closed so it can install.

  I don't know, but looks like the preview, Photos or mail does not. If you go to the Apple in your menu bar and select force quit, it should identify and allow you to force quit the application is not responding.