MediaSmart software - blu - ray

Similar Questions

• HP mediasmart DVD & Blu ray?

  I tried to play a blu ray dvd player and I get the following message:

  "Mediasmart DVD does not support playback of Blu - Ray disc on a virtual device. A Blu - Ray disc must be inserted into a BD - ROM drive for reading. »

  any ideas on how to make if it is possible to solve this problem?  Thank you!!

  Hello

  You have a virtual drive installed on the laptop software?  If so, uninstall it (at least temporarily) and restart the computer before trying the following.

  HP now provides a version of PowerDVD 10 Cyberlinks which seems to be a better solution.  Download the latest installer for it on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56904.exe

  Once the download is complete, open windows control panel, open programs and features, make a right click the entry for HP MediaSmart DVD and select uninstall - when this process is complete, restart the laptop.

  When windows has reloaded, open your downloads folder and double-click Setup for PowerDVD 10 start the installation.  Once this done, see if your Blu - ray disc now plays OK.

  If it play Ok now and you didn't need to uninstall any virtual drive software, try to reinstall right now to see if the issue Returns or not.

  Kind regards

  DP - K

• HP Mediasmart DVD - Blu Ray problem

  Hi I have a HP Pavilion dv6t-2300.

  Last month I had a problem when trying to play a few blurays with smart media. It was as if the Player tries to rplay disc, but after some time nothing happened, if I tried to update the software, but it shows an error during installation (something on this topic couldn't find a dll file in the folder of mediasmart dvd), I tried to uninstall it but displayed the same problem. After struggling with it, I decided to restore my laptop with the recovery discs.

  It worked, I was able to watch my blurays, but recently the same problem came back. So I did a little research and I found that the PC or device manager sees 2 readers of comics (F and H). I also found that I can see all the files on disc bluray but I can't play any of them media smart dvd.

  I also installed the Power DVD 10 to test as a trial and it cannot read the movies either, it says that the disk has a format of media unrecognize, or something like that.

  So I decided to try to update with the latest version (4.2.4701), but the error I mentioned earlier, appeared once again, I have the previous version (4.1.4328).

  As the media smart dvd worked until now I run only a few updates of windows and the HP updates (like the quick launch buttons and chipset). I wonder if these updates have something to do with the problem.

  BTW: I can watch DVD movies without problem in the DVD Smart Media, the problem occurs only with the BD discs.

  I hope you can help me...

  Thanks in advance.

  You can post a screenshot of what you see in 'computer '?

  You use a virtual drive?

  Here's what yours should look like.

  

  Drive 'E' is the second last next to drive Clone as appropriate so that DVD MS is going to see it.

• Where can I download the software of Toshiba Blu - ray disc player to win 8.1?

  Hello

  I installed my Toshiba P70-A-104 completely new with Win 8.1. The company. The software Toshiba Blu-ray disc player isn't anymroe availabe which was available on the original installation of Win 8.

  Anyone know where I can download this software?

  Hello

  I don't know why this utility is not listed on the page of the Toshiba UE driver but I found the reading software Blu - ray Toshiba on the Toshiba driver page Australian Windoiws 8.1:
  http://support.Toshiba-tie.co.jp/windows81/drivers/PSPLP_Up_au.htm

  The software is released for Satellite P70 - A series
  But these utilities are not released for specific cell phone model.

  The only restriction is the availability of the disc Blu - ray (optical disc) drive
  In case your laptop supports the Blu - ray disc player, this software might be installed on your device.

• is there any blu - ray FREE decent players for a win764bit pc software please?

  Hello

  I'm finally burning standard blu - ray DVD files

  and play them on a bluray set top player...

  However, for the control of quality before burning, I wish I could

  to read the files exported from MediaEncoder

  without having to load the images in still enjoy

  of is the possibility of sequences with sound playback bluray...

  are there any (hopefully it Freeware) readers software blu - ray PC win7 64 bit

  like vlc player or something?

  Thank you

  Jeffrey

  I have no trouble visualizing the mts files in Power DVD (I think you need the Ultra version) and I'm still on version 8. Make sure you have the latest updates.

• Satellite A-P70-11R - drive Blu - Ray from Toshiba does not work after windows 10

  Hello

  Please can someone help with my Satellite P70-A-11R

  I have upgraded to Windows 10
  My Blu - Ray player would not work but the DVD worked,
  All drivers OK

  I tried to update and it said to remove old version first.
  I uninstalled it, then says cannot install the update as the program was deleted!

  I could not find the full program file to reinstall, so has restored a system.
  The program will be same not open even if its there and shown in the Task Manager.

  I asked Toshiba if they could send me the link to the full program (not an update or a patch)
  They sent me this link below, however its been said patch when you try to install it...

  Following our previous phone conversation please select the link below to install new software Blue Ray
  http://Support1.toshiba-tro.de/Tedd-...0213143736.zip

  When I try to install it says.
  Build version of the source is not build target error 2

  Now I'm stuck
  Thank you

  P70-A-11R satellite belongs to the PSPLP series.

  Windows 10 drivers and updates to tools Toshiba (update of the Blu - ray Toshiba disk drive) can be downloaded from this page:
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

  

• Drive Blu - ray for g62-455dx

  I would like to replace my DVD drive internal stock (599062-001) with a Blu - ray player.  Partsurfer site does not list a Blu - ray drive for my computer laptop, g62-455dx, but I don't see Blu - ray discs for other models g62.  Specifically, I see the drive 599063-001 listed, but I don't know if it will work with my laptop.

  Is drive compatibility just make to it the device physically fits in my laptop?  Or are there other requirements of the machine, such as the BIOS support or discrete video adapter?  I understand that I need software Blu - ray.

  It's just a matter of physical compatibility. Even if you have the Intel HD video which is sufficient to support playback of Blu - Ray. Caveat that if you have a display of 1366 x 768 Blu-Rays looks not very different from DVDs. Windows will provide a generic driver optical drive to a very basic layer of the operating system that you want to mount as a volume and a function higher as DVD and Blu - Ray playback and burning disc is provided by Windows or third-party software.

  As long as the drive is the right thickness (9.5 to 12 mm) and SATA (like all Blu - Ray players) it will slide into the hole and connect. You may need to Exchange facades to maintain perfect chassis and color coordination.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• drivers sony blu ray BDU X10s windows 7

  Hello!

  I need drivers for a SONY BLU RAY X10S DBU for Windows 7 64 bit, Icant find it, can you helpme.

  Thank you

  Should be included in Windows - but you need software Blu Ray to PLAY a video.  Personally I use Cyberlink PowerDVD (www.cyberlink.com), but you can have something different.

• HP mediasmart dvd - play the blu - ray disc Avengers

  Hello

  I have a hp laptop with win 7 Home premium 64-bit.

  I use the HP Mediasmart DvD version 4.2.2.5122 of the software and I can not play the Avengers Blu - ray disc - all other bd drives works fine (tintin, avatar, etc.). Does anyone know if there will be an update for Mediasmart dvd software support disk Avengers?

  Hello

  If you use HP MediaSmart DVD to read Blu - ray disc, try the following.

  HP now provides a version of PowerDVD 10 Cyberlinks which seems to be a better solution.  Download the latest installer for it on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56904.exe

  Once the download is complete, open windows control panel, open programs and features, make a right click the entry for HP MediaSmart DVD and select uninstall - when this process is complete, restart the laptop.

  When windows has reloaded, open your downloads folder and double-click Setup for PowerDVD 10 start the installation.  Once this done, see if your Blu - ray disc now plays OK.

  Kind regards

  DP - K

• Not Surround sound more on Blu - ray player after upgrade by MediaSmart

  When I used the Blu - ray player in my home theater, I selected the mode "HDMI pass" to get a sound surround. I came across a few new films that would not play and after the update from HP, the player would simply freeze as soon as there is audio present. I had to go to the Task Manager to close it.

  MediaSmart works fine on the laptop, but it only freezes when I use the parameter "pass through HDMI.

  I tried mode "HDMI pcm" and who does not work either. This Denon receiver there are five channels work but I get stereo sound on front speakers left and right. This seems to indicate that the Blu - ray player is not released in 5.1 surround sound and the laptop and the Denon receiver works fine.

  Supports the HP solution was to reinstall the older driver or try a system restore. I know that a system restore won't do anything. The problem is in the new software. The new software does not work on my HDX18 when he was under Vista, it did not work when I upgraded to Windows 7 and it does not work on my new dv8.

  I tried to contact CyberLink to let them know that the upgrade is giving problems, but I think they ignore me.

  Personally, I think that HP or Cyberlink just forgot to add the drivers for a 5.1 and 7.1 surround sound.

  If anyone find a solution to this one that I wouldn't be surprised. I'm quite sure I've covered all the possibilities, but you never know.

  Any help would be appreciated.

  Thank you

  HP had me download a software called K-Lite which is a software codec repairs and replacement. After the upgrade of the software more returned to get my blu - ray movies to work, I ran K-Lite and that did the trick.

  http://www.codecguide.com/download_kl.htm

  I used the mega version, but you can probably use the standard.

  It is a software complex with many choices and I changed it to accept a sound audio surround and DTS 7.1. There were several boxes prompting me to remove the broken codec which continued for some time and when it was all thanks to I was surprised that it worked.

  Meanwhile CyberLink itself actually got back to me and I was given some temporary free software provide I run their diagnostic tool for them on my dv8 for helping them understand my problem. It is still pending.

• HP mediasmart dvd will not play blu - ray discs. Just asking if I want to check the updates.

  It is a new problem.  Played before blu - ray discs without any problem.  I have a HP Pavilion dv7 notebook.  Windows 7.

  I was able to solve my problem by downloading and installing the latest version of the HP Mediasmart DVD software.  I left the installer to uninstall the previous version and everything went well.  Thanks for the help.

• Can anyone recommend a reliable blu ray software for use with a MacBook?

  Hello world

  I've been watching Blu - Ray software for Mac, but I thought I would check here first of all for the recommendations?

  Can anyone suggest a software reliable blu - ray.

  Thank you

  http://www.macblurayplayer.com/features.htm

• Recommend Blu - Ray burning software

  Hi all

  I can find a BLu - Ray burner, but the software that allows you to burn BLu - Ray still seems a bit sketchy.

  One below looks good, but many say that you must purchase additional software for blu - ray burning.

  I have toast, but an older version and do not want to pay just to be able to burn blu = ray.

  Is it safe to burn it to Blu - Ray in the FCX? This option requires no other software right? The iMac and FCX

  has everything what to do?

  Thank you
  Al

  B & H recommended:

  http://www.bhphotovideo.com/c/product/1051656-reg/samsung_se_506cb_rsbd_sam_slim _exterior_blue_ray.html

  What do you do with your DB? If you need to create sophisticated, you may need a Windows machine. If all you need is a reliable compiler and running something that reliable external combustion of FCPX, Toast gets my nod.

  Burn inside FCPX works very well but it is facing issues like burning DVDs, especially subtle graphics or menu glitches that are difficult to track down or weird user errors.

  From the FCPX help system:

  DVD and Blu - ray

  Use these destinations to burn your project or the clamp to standard definition (SD) DVD or Blu-ray-compatible disk, or to create a disc image (.img) file, you can copy on an external drive or burn to a disc later.

  Note: The destination of Blu - ray does not appear by default. To add it to the list of Destinations, see create and edit the destinations on the part of.

  The DVD and Blu - ray destinations include the following parameters:

  • Output device: Display output devices appropriate to your system including the optical drives and hard drive of the computer. You can use your hard drive to create a disc image (.img) file that you can copy to an external drive or burn it on a DVD media more later.
  • Layers: Displays the available layers on the destination media.
    • Auto: Automatically detects the type of disc you can use.
    • Single layer: Identifies the disc as a single-layer disc. You can use this option to force a disc double layer is treated as a single-layer disc.
    • Double layer: Identifies the disc as a double-layer disc. You can use this option to force the disk image is formatted for a disc double layer when you choose the hard drive as your output device. Important: Depending on the duration of the project, choosing Double layer when you use a disc single layer can cause an error when burning the disc.
  • Drive model: Displays the available disk models.
  • Disk when loads: Displays the automatic action when you play the disc.
    • The menu: Displays the main menu.
    • Movie Play: Immediately starts playing the movie.
  • Markers: Not available for Blu - ray when using a peripheral output AVCHD. Select the check box to include the text of chapter markers as subtitles on the output disc. Users can navigate between chapter markers by pressing the button next chapter or previous chapter on the DVD or Blu - ray drive. For more information on chapter markers, see Manage chapter markers and their thumbnails.
  • Loop: Available for Blu - ray only. Check this box to add an icon to the loop on the menu.
  • Background: Click the Add button to add a background image.
  • Chart of the logo: Available for Blu - ray only. Click the Add button to add a graphic logo.
  • Title graphic: Available for Blu - ray only. Click the Add button to add a chart title.
  • Preview: Click on the main Menu to display an overview of the main menu; Click on the chapter Menu to preview the chapter menu.

• Software disc drive Blu - Ray doesn't play new Blu - Ray!

  Rather disappointed with the Blu - Ray drive at this moment!

  My machine is a Qosmio X 870, running under Windows 7 64-bit. It comes with the Blu - Ray disc player, which so far I've used with my previous purchase - the next Star Trek generation season 2, which presents - and continues--work very well.

  However, the season 3 Blu-Rays that are just out, do any work! As far as I know, the discs are not defective - they are recognized, and the structure of the file is there. I tried multiple disks, but all simply freeze them the player when he tries to load them. The screen is black (flickers sometimes) and unresponsive. There is no error message. As far as I know, this isn't a hardware problem - disks are fine and the laptop drive can play the old blu - ray without problem.

  However, these news do nothing.

  * Solved * -after a lot of searching around, managed to find a software update for the player on the Australian Toshiba site (why doesn't the European site list the Bluray Player among the software updates?).

  http://www.MyToshiba.com.au/support/...download?OS=25

• Updated Corel WinDvd Blu Ray software player?

  Now we all know that Sony Vaio sold, how about software update for your laptop in the future... especially a lot of us have coral blu - ray software player /WinDvd...?

  THX

  p.s. I checked.... last update was June 2013.