Member not pulling formula

Similar Questions

• Report text - member not found problem

  Hello

  The problem I have is very similar to this knowledge base entry: http://digital.ni.com/public.nsf/allkb/2FCAAF080951FCAB86256982007AA16C except that I am experiencing on the target with no development environment machine. I installed the runtime Labview 7.1.1 first, then I had to also run a few old 5.1.1 code so I installed the 5.1.1 runtime. I am currently not able to print, I get the following error: Member not found in value Margins.vi-> simple text Report.vi-> printdata.vi...

  Anyone know how to solve this problem without using the development environment?

  Thank you

  Howard Spec

  CMC electronic

  Canada

  Hillman, I think I've solved the printing problem. That's what I did:

  1. from Add/Remove, I uninstalled OR-report

  2. starting at \Shared, I removed the directory NOR-reports

  3. I checked the registry, but there are no records OR reports to remove - if no change here

  4. I did a repair on the 7.1.1 run the engine. Printing from 5.1 seems OK now. I still have more work to do on my new 7.1.1 application, so if I see more problems, you may hear from me again.

  Thanks again,

  Howard

• Added system ok but as far as I know, powerUp listener not pulling

  Hey. My application, in main(), adds a listening on starting system to cold (battery replaced), without error. However, the powerUp method below does not pull when I switch off my BB and sur-Appuyez the red end button for 5 sec and press once again (a warm start). How do you get powerUp to call? Code is below.

  MSL MySystemListener = new MySystemListener();
  MonthlySpend ms = new MonthlySpend();
  ms.addSystemListener (msl);

  private static class MySystemListener implements SystemListener
  {
  public void batteryStatusChange(int a) {}
  public void batteryGood() {}
  public void batteryLow() {}
  public void powerOff() {}
         
  public void powerUp() {}

  PerformAnyReset... schedule, calls so if not reset, don't program twice
  If (!.) PerformAnyResetWhichWasScheduledWhilePhoneWasSwitchedOff())
  ScheduleTotalResetForStartDateOfNextBillingCycle();
                                 
  SetIconAndTitle();
  ScheduleIconUpdateOvernight();
          
          
  String logMessage = "Warm" started
  If (EventLogger.logEvent (0x4c9d3452d87922f2L, logMessage.getBytes (), EventLogger.ALWAYS_LOG)) {}
  System.out.println ("Log successful!");
  }

  Hey - fixed. The application itself must be a SystemListener, not another class

  J

• Duimension Build the file source and rule of sql (\ member not found in db)

  Hello
  I try to build a sql source dimension.
  I have create a dimension called DIM_TEST (without members only the name) with the service management console.
  I opened the data prep Editor.
  I opened the sql: I used just deptno and empno from EMP (in the scott schema on ora11gr1).
  The results are displayed, and everything is ok.
  I associated the outline.
  Option - Size build generation references (build Dimension settin tab) use.
  Fields - properties (dimensions build properties): ranked number 1: 2nd generation and the field number 2: generation 3.
  I save the rules file.
  load data: select SQL source, the rule files and put the username/password.
  Usually, I have a warning and there is no data loaded.
  I check the log and I have the same problem:------20 Member not found in database (deptno) 20 7369 (empno).
  I tried to change the field empno in the data field, but is the same problem.
  I changed the parent-child method instead of the generation and the more often the same problem.
  Thanks for your help.
  Faouzi.

  Looks like you do a load of data instead of dim build. When you enter the data loading dialog box, there is a drop down that is default to load only. You will need to change to build only

• Method Get JDev 10.1.3.3.0, not pulling on the second visit

  Hello
  
  I'm having a problem with the accessor get and setters of my grain of support not pulling on the second visit to the page. When I visit the page for the first time, it works very well and the calculations are complete but when I revisit the page it doesn't work. Any help would be great. I have setup a custom but phaselistener do not think that is the problem as I tried it on a test page with only field based on him and it works very well.
  
  Thank you.

  "Revisit" a page can mean many things. Are you you speak by using the back button on your browser, or by using the in-application links to access the page? In 10.1.3 ADF is not really compatible back-button navigation. I've seen full button back-support for 10.1.3 House, but it is not easy (basically, it's doing things fantasies with frames, makuing sure that back button always navigates actually a hidden frame and Javascript in this context which submits to having again the previous page request). It's one of these things "I hope 11g coming out soon.

  If you actually go back to the page by using the links on the page, it's a little more surpsising. It is certainly the getter which is not put to fire, and not, say, code in the constructor of the Get accessor is dependent on? If the latter, make sure your scope of bean; It must be set to 'request', or you will be reusing an old bean rather than make a new. Otherwise, I'm at a bit of a loss.

• Member of ASO formula - Concat

  Hi all

  First of all, please forgive me because it is my first stab at MDX ever.  My experience is only with BSO.

  I'm trying to concatenate a part of a member name and a string in a member of a cube ASO formula.  The dimension that I'm referencing is 'DATE' and I'm trying to concatenate the first 15 characters of the Member with a '01 '.  For example, the member name ' DATE. Day.20110115' really has to come as a "DATE. Day.20110101' because I am concatenating ' DATE. Day.201101 'and '01'.  The member formula that I have written includes the following elements do not validate:

  STRTOMBR (concat ([DATE].) (([CurrentMember.Member_Name, '01']))

  I'm trying to fix the first day of the month after the user is the recovery and cross (tuple) dim with a reporting line

  Thanks in advance!

  You will need a command of substring to get the 15 character and then concatenate something like STRTOMBR (concat (substring ([DATE].)) (CurrentMember.Member_Name,1,15) '01'])).

  Another way is to add an attribute to these members and get their value from the attribute for you tuple.

  Concerning

  Celvin Kattookaran

• Not calculation formula

  Hi all

  1. I am facing a problem. I'm figuring a member (BC54500.100) dimension in two different ways, one way, then the SCENARIO dimension member selected in the screen is "TRAFFIC" and a different way for each other Member of the SCENARIO dimension.

  BC54500.100 has two children, a BT54500.100 who has the percentage of data type and BT54500.110 which is used to store the actual for this calculated, real Member coming from the EBS.

  For this I need an IF clause, so I did:

  If (@CURRMBR ("Scenariu") is "TRAFFIC")

  BC54500.100 = 5 * BT54500.100 / 100;

  ON THE OTHER

  BC54500.100 = (BC54110.100 + BC54110.200 + BC54420.100 + BC54420.200 + BC54410.100 + BC54410.200 + BC54110.300 + BC55300.700 + BC54210.600 + BC55300.900) * BT54500.110;

  ENDIF;

  The Colombia-British... and BT. are all members of the dimension account.

  The problem is that it never calculates the ELSE condition. I tried to move the formulas in order to have an answer, I also tried:

  If (@CURRMBR ("Scenario") <>'TRAFFIC')

  BC54500.100 = (BC54110.100+BC54110.200+BC54420.100+BC54420.200+BC54410.100+BC54410.200+BC54110.300+BC55300.700+BC54210.600+BC55300.900)*BT54500.110/100;

  ELSEIF (@CURRMBR ("Scenariu") == "TRAFFIC")

  BC54500.100 = 100 * BT54500.100 / 100;

  ELSEIF (@CURRMBR ("Scenariu") == "Revizie1")

  BC54500.100 = (BC54110.100+BC54110.200+BC54420.100+BC54420.200+BC54410.100+BC54410.200+BC54110.300+BC55300.700+BC54210.600+BC55300.900)*BT54500.110/100;

  ON THE OTHER

  BC54500.100 = (BC54110.100+BC54110.200+BC54420.100+BC54420.200+BC54410.100+BC54410.200+BC54110.300+BC55300.700+BC54210.600+BC55300.900)*BT54500.110/100;

  ENDIF;

  
  

  Each time, the last condition is not respected in the calculations. I moved the formulas between them over and over again, whenever that is the last is not calculated... Any ideas?

  
  

  
  

  
  

  2. another another minor issue, is that as I have said before that I have some members as BT54500.110, who have the percentage data type. And I have 10 entities, with a parent entity. When I view the data in the form that sums the values which lie on all BT54500.110 members for all entities, even if at the level of plan type, I selected medium. I do not have the sum, ideas?

  We have Hyperion Planning 11.1.2.2.0.7790

  
  

  Thank you very much for your time!
  

  Thank you Philip for your reply and thank you all.

  I managed to solve the problem.

  The solution was:

  SET UPDATECALC ON / OFF;

  
  

  before the formula correction...
  

• Member not found when loading data with SQL

  Hello everyone:
  
  I created a cube map extract all information with SQL statements and it works perfectly. Now I'm trying to load data in the same way, but I can't.
  
  I created a view that returns data in this format:
  
  Dimension 1 < tab > axis 2 < tab > member... Member of dimension 5 < tab > measure 1 < tab > 2 < tab > measure 3
  
  I designed a new rule, indicating for each column in the dimension; and for each measure which specific member of dimension of accounts must be used. I have check and everything is ok, but when I try to load data, it does not work and tells me error:
  
  + "Data value [3.5] met before that all the selected Dimensions, [1] Records duly filled.
  + Essbase error unexpected 1003007 "+"
  
  If I get the names of the members with quotes (because they contain spaces, and it is perhaps the reason for the previous error, although the rule analysis correctly) with the SQL statement, when Essbase import, it deletes these quotes. I must use another symbol, and as a rule change this another symbol quotes. Is this normal? I know that this issue when importing formulas, but not here.
  
  Why in 'Dimension building' I don't have this problem with quotes?
  
  And when changing the symbols of quotes, this error occurs:
  
  + "Member x not found in the database" +. " But I check the Member and there are in general terms. What's wrong with that? »
  
  
  Thanks in advance
  
  Concerning
  
  Javier
  
  Published by: Javi M on 26-mar-2011 05:52

  Yes, the SQL files and data (of all kinds) are supported by more than one column of data. As you noted, you just point to the Member that represents the column.

  That said, I bet that if you look at your view/table and load the rule against your outline, I bet you find a dimension be mismapped, for example, you think that this column 4 points to the scenario, but you really repointe it produces and which purported to be the column 1, or you missed a dimension. Happens to me all the time.

  Kind regards

  Cameron Lackpour

• On the conversion of the Member of BSO formula helps ASO

  Hello
  
  I'm new to MDX and got stuck on the conversion of function @IsMbr to ASO.
  
  Here's what my formula BSO
  
  JFK
  @ISMBR ("a") AND @ISUDA ("Account", "L"))
  « C » = « D » ;
  ENDIF
  
  Note: A, C, D and L are of different sizes.
  
  I am able to generate the formula of the BSO and I've tagged dynamic members top member. I have therefore been able to data aggregated.
  Formual to ASO works on lower-level members, but I can do together to ASO. She says all dynamics.
  
  Thanks for your suggestions.

  Hello

  There is a very good article in the MDX > Aggregate Storage topics > MDX contour forms Essbase technical reference which are necessary to carry out certain functions of BSO calculator examples of the MDX, the link to the 9.3.1 version is attached here.

  [http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_esb_techref/techref.htm]

  The @ISMBR example is slightly more complicated than what you need, what it is looking for a range of members, where you don't need one Member, so it should work (which assumes that you calculate 'Member C'):

  IIF (is ([Dim]. CurrentMember, [A member]) AND IsUda ([account]. (CurrentMember, 'L'), [member], missing)

  Please note that when the words are underlined in what above, they must appear in [but here assumes that it is a link and notes.] This formula is perhaps not optimal but it works for me.

  I'm afraid that my MDX skills probably don't extend far enough to help with your other point, it sounds as if you need a the IIF formula that performs a calculation if at level 0 and children are current Member if, at a level higher than 0, but I think that could involve a lot of orders "Crossjoin" and I have not tried those of front.

  Hope this helps
  Stuart Game

• Do not run formula until the full input cells

  Hello ladies and gentlemen

  I'm not a user of regular broadcast sheet, there must be a good few years since I changed the numbers you use...

  But I plug just your new car and I wanted a spreadsheet for just about track mileage and fuel MPG etc.

  Self created one and it works very well in my goals.

  I copied the formulas in cells, but the lines that have not been provided for future end of refuelling upward with being supplemented with nonsense

  How can I avoid the form "in cell formulas' filling the cells up to that there are entries in the column of the figure of supply?

  Perhaps easier if I show a picture

  Yellow cells I get my numbers

  Green cells contain formulas.

  How can I stop the numbers filling in the Green columns until I enter numbers in the yellow?

  As you see, the-9800 the ones and zeros of formula errors

  I did some research... but no idea what word I'm looking for able to conduct a successful search. Tried such research than the job title and multiple similar on the same theme... but all from a blank test.

  Here is the worksheet that I created:

  http://paisnel.co.UK/upload/KIA.numbers

  Thank you

  

  Hi Neil,

  This approach is to test your yellow column to see if it has a value. Len() will be taken into account the characters in a cell.

  C3 = IF (LEN (B3) "> 0, B3−B2," "")

  This formula will test a B3 value and if there is one subtract it from B2. If there is no value it returns "" which resembles a cell empty.

  If B is always going to be a numeric value, you could simplify the test:

  IF(B3>0,B3-B2,"")

  Quinn

• Member not found error when trying to add the generic script in the windows 2003 cluster

  I tried to add a generic script in the cluster windows 2003, I've already done a script with the extension .vbs, but when I tried to add the path of the script file its gives me an error indicating that the Member could not be found. Can you help me about this error?

  Hello ishuvbaidhya,

  Your question may be the best answer in the forum TechNet for Windows Server.

  Please transfer your question in forum Windows Server below.
  http://social.technet.Microsoft.com/forums/en-us/winserverManagement/threads

  They will be better able to help with your problem.

  Sincerely,

  Marilyn

• do not pull on my EOS 70 d

  My EOS 70 D won't all take pictures. When I take a picture, it will act as it concentrates in flashing and others, but he won't never through. He always busy. I tried all modes, and none does not work even without flash.

  I also pulled the battery out the card reformatted it and erased all settings of the device.

  Violetas wrote:

  My EOS 70 D won't all take pictures. When I take a picture, it will act as it concentrates in flashing and others, but he won't never through. He always busy. I tried all modes, and none does not work even without flash.

  I also pulled the battery out the card reformatted it and erased all settings of the device.

  Development of a sudden camera mode must have the focus before he can take a picture. Looks like you try to take a picture where it's too dark, and there is not enough contrast for the camera to the point to get. I suggest that you watch these videos if you have a understanding of the functioning of the AF system of your camera.

  Join a two-hour session which will remove the veil of mystery surrounding their Canon EOS camera autofocus system for many photographers, Rudy Winston of Canon USA.

  A glance at the part of Autofocus system Canon 1

  A glance at the part of Autofocus system Canon 2

  A glance at the part of Autofocus system Canon 3

• Select the Member not level 0 in the form of Hyperion Planning

  Hello

  I have the next dimension:

  Total product (Lev 3)-> product-> product-> product (Lev 0) (Lev 1) (Lev 2)

  In the form of selecting members, I need to dynamically select ALL AND ONLY members of level 1 (range). How can I do this?

  I can't use a filter on an attribute, because the product range is not level 0 and the member functions (ancestors, children, Parents,...) do not seem to apply in my case.

  I thank you,

  Federico

  I don't think that there is a simple approach. If your rating is sparse, then you can assign attributes to the level 1 members and use the form.

  Concerning

  Celvin Kattookaran

• Not pulling not updated on the Server internal Flash

  Hello

  Two years, I configured an internal server to distribute Flash updated to Windows endpoints. It works well, until he appears, this month of May.  My end points are so stuck on 13.0.0.214. If something has changed

  Check that I did:

  1. update script on the server always pulls files. Destination folder indicates v14 has been downloaded

  Pulling the version.xml from the update server to update internal (via https) confirms this.

  For info:

  < version >

  "" < ActiveX major= "14" " minor="0" buildMajor="0"" buildMinor= "145"/ >

  "' < Plugin major="14"" minor= "0" buildMajor= "0" " buildMinor="145"/ >

  "" < MacPlugin major= "14" " minor="0" buildMajor="0"" buildMinor= "145"/ >

  "< SAUConfig checkFrequency="1"/ >"

  < / version >

  2 CNAME 'flashupdate' is always in the DNS system

  3 domain wildcard cert is valid and linked to HTTPS such that I get no warning of the cert when you browse the internal update server https://flashupdate.domain.local (IIS 7)

  On an endpoint, here is a sample flashinstall.log (could not find the error codes mean!) for about the last 30 minutes. I used FlashPlayerUpdateService.exe to start manually.

  2014 7-9 + 14-45 - 44.830 [info] 1628 flashupdate.domain.local

  2014 7-9 + 14-45 - 44.830 [info] flashupdate.domain.local 1629

  2014 7-9 + 14-45 - 44.831 [info] 1614

  2014 7-9 + 14-45 - 44.831 [info] 1616

  2014 7-9 + 14-45 - 44.832 [info] 1618

  2014 7-9 + 14-45 - 44.835 [info] 1608

  2014 7-9 + 14-45 - 44.835 [info] 1612

  2014 7-9 + 14-45 - 44.837 [info] 1620

  2014 7-9 + 15-18-0, 225 [info] 1628 flashupdate.domain.local

  2014 7-9 + 15-18-0, 236 [info] 1629 flashupdate.domain.local

  2014 7-9 + 15-18-0, 238 [info] 1614

  2014 7-9 + 15-18-0, 239 [info] 1615

  2014 7-9 + 15-18-0, 240 [info] 1618

  2014 7-9 + 15-18-0, 242 1619 1063 [info]

  2014 7-9 + 15-18-0, 282 [info] 1628 flashupdate.domain.local

  2014 7-9 + 15-18-0, 283 [info] 1629 flashupdate.domain.local

  2014 7-9 + 15-18-0, 283 [info] 1614

  2014 7-9 + 15-18-0, 284 [info] 1615

  2014 7-9 + 15-18-0, 284 [info] 1618

  2014 7-9 + 15-18-0, 287 [info] 1608

  2014 7-9 + 15-18-0, 288 [info] 1612

  2014 7-9 + 15-18-0, 289 [info] 1620

  2014 7-9 + 15-18-0, 289 [info] 1604

  This is an output of LS endpoint for C:\Windows\SysWOW64\Macromed\Flash showing that nothing moves

  43871 total

  -r - r - r - 1 usergroup 16435888 May 15 12:18 Flash32_13_0_0_214.ocx

  -rw-rw-rw-1 user group 4609272 9 Jul 16:18 FlashInstall.log

  Usergroup - rwxrwxrwx 1 1863856 15 May 13:18 FlashPlayerPlugin_13_0_0_214.exe

  -rwxrwxrwx 1 user group 257712 May 15 13:18 FlashPlayerUpdateService.exe

  Group of users - rw-rw-rw-1 511152 May 15 12:18 FlashUtil32_13_0_0_214_ActiveX.dll

  Usergroup - rwxrwxrwx 1 847536 May 15 12:18 FlashUtil32_13_0_0_214_ActiveX.exe

  Usergroup - rwxrwxrwx 1 847536 15 May 13:18 FlashUtil32_13_0_0_214_Plugin.exe

  -rw-rw-rw-1 user group 16361136 May 15 13:18 NPSWF32_13_0_0_214.dll

  Group of users - rw-rw-rw-1 1583299 May 15 12:18 activex.vch

  Usergroup - rw-rw-rw-1 856 15 May 13:18 flashplayer.xpt

  -rw-rw-rw-1 user group 0 9 Jul 16:25 ls.txt

  -rw-rw-rw-1 user group 135 9 Jul 15:52 mms.cfg

  -rw-rw-rw-1 user group 1598803 May 15 13:18 plugin.vch

  The mms.cfg looks like:

  AutoUpdateDisable = 0

  SilentAutoUpdateEnable = 1

  SilentAutoUpdateServerDomain = flashupdate.domain.local

  SilentAutoUpdateVerboseLogging = 1

  I know that

  1. the internal update server is able to communicate with Adobe and download the updates (I used wget in verbose mode to check the result).

  2. on the verge of ending, I manually browse and download files update v14 without problem, so config and web hosting permissions looks ok

  3. the update of the endpoint for a reason any still refuses to remove the updated files. So, the idea seems to be in the mysterious error codes?

  So I'm stuck - please help!

  Hello

  I'm glad it works for you now.

  The Setup log file you posted contains any errors, codes just information that indicates the proper functioning of the background update features.

  To clarify one of your points, the internal update server does not communicate with Adobe servers to download the update package.  As an administrator, you or someone else, would need to download the update package (fp_background_update.cab) and send the files (in the structure provided) on your internal server.  It is a process unless automate you it.  Once the files are displayed on your server, it can take up to an hour for updates start to appear on your machines users (of course, depending on how your environment is configured, you can to clear the cache of your server so that the new files to download).

  --

  Maria

• Dynamic Calc'd member not to pick up the void Var changes - 11.1.1.3

  Hello
  
  We have a Dyn Calc formula member using a void var on a member. Void var update, values in the formula of Member referencing the void var don't update. We must stop and start the application so he can pick up the sub new var in the formula of Member.
  
  any ideas?

  Unfortunately we must live according to the definition given in the SER60 which is in the post that Tim has provided the link to but no one seems to follow the links in our days :)
  "To ensure that a new value of variable substitution is available in formulas, definitions of partition and security filters, stop and restart the application. All other uses of the substitution variables are resolved dynamically when it is used. »

  See you soon

  John
  http://John-Goodwin.blogspot.com/