Memory dump

Similar Questions

• Satellite L755 - 16L gives the blue screen and physical memory dump

  Please advice

  I bought my L755 - 16L in the month of August.
  Until last week it went very well.

  Last week I'm going to visit another country he only has the 240V voltage.
  Normally at home, I use 100V power supply for my laptop.
  After my return when I connect top of laptop and the go blue screen screen work and grant discharge mini information of physical memory.

  Usually, I unplug the charger after the judgment.
  The next day if I start the computer, the computer gives the blue screen and physical memory dump.
  If not unplug the charger after stop down and don't use the next day then no problem.
  Please advice what can I do to stop this problem.

  This is the report of errors in Event Viewer.

  "The system has rebooted without judgment properly first. "This error can be caused if the system unresponsive, crashed or unexpected power loss.
  System

  -Supplier

  [Name] Microsoft-Windows-Kernel-Power
  [Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}

  Event ID 41

  Version 2

  Level 1

  Task 63

  Opcode 0

  Keywords 0 x 8000000000000002

  -TimeCreated

  [SystemTime] 2011-11 - 27 T 10: 43:19.248036500Z

  EventRecordID 48763

  Correlation

  -Execution

  [ProcessID] 4
  [ThreadID] 8

  Channel system

  Computer toshiba-TOSH

  -Security

  [User name] S-1-5-18

  -EventData

  BugcheckCode 30
  BugcheckParameter1 0xffffffffc0000005
  BugcheckParameter2 0xfffff80003717ce5
  BugcheckParameter3 0x0
  BugcheckParameter4 0xffffffffffffffff
  Fake SleepInProgress
  PowerButtonTimestamp 0

  Hello

  In general the BSOD is the product of the problem of hardware or software problem. To check if it of software or hardware associated with deliver its necessary to reinstall the OS and check if the BSOD will appear using the new OS preinstalled.
  Of course, it s painful to do that because the recovery procedure would format the HARD drive and therefore the data backup is necessary!

  I don t think that the different input voltage might affect the functionality of the laptop computer because the laptop uses the universal adapter that supports entry 100V-240V.

  BSOD can be caused by faulty memory modules so I think that this test of memory could be useful also

• BlueScreen: Physical memory dump

  Yes, until recently (18-20 November) my phone worked relatively well. I had a few updates around the 10 that I was not being updated with, and having done, I started to receive discharges of physical memory. My first solution was restoring to before I updated my computer, which worked. I reinstalled my updates after a good 4-5 hours, but ends up with the blue screen 10 minutes after a session shortly after. I looked at the thread of August, but these updates caused no memory dumps. On the side, I removed the update causing a bluescreen different I still have to meet, and I don't know if it's the Manager of my dump (KB9XXXXX, lost the related forum). I also try to avoid that at ALL COSTS because I know that damage dumps physical memory can make a computer to test.

  And somehow my question of Windows Vista to put in Windows 7... ?

  CriticalComp,
  Here are a few things I would say.

  Run the Windows Memory Diagnostic to ensure that there is not a problem with the RAM.

  And then perform a clean boot and test.  This can help determine if there is a conflict with a 3rd party software.

  You can also run System File Checker to search all of the corrupted system files.
   
  BTW - the update of Windows (and a few other forums) are combined forums, so all versions of Windows go on the forum itself.  Sorry for the confusion.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Server Terminal Server 2000 running, Memory Dump, restarting and checking bug error 0x0000007f

  I've been to dump memory and blue screen on a Windows Server 2000 Terminal Server running.

  I had to change the server for a complete memory dump to just check bug 64 MB because memory dumps were fill the C drive and it is the same mistake each time it fails.

  It is a production server and is vital to my business.

  I don't want to just install the 5 or 6 different patches from Microsoft that references the same exact error code, error message stop and symptoms for Server 2000.

  I just replace the memory new inside with two sticks and I even changed the boxes it was with one that has no hardware problem as I have a few of them.

  So he this 2000 Server had the motherboard, processor, memory, network, Audio card, changed video cards and I always get this accident a few times a day.

  I can't find anything definitive on this so if anyone has had the same problems and found a solution, then I'd be very happy to help.

  I am doing a complete network upgrade in the next month or two.

  My work is located in the middle of the busy season and I cannot take the server down and impossible to install anything that could cause a hard accident and not to start again.

  I'm in the middle of an upgrade of the network and we'll go virtual with this server with as many others as I can.

  I need to this Terminal Server to stop crashing and to find a solution for it, while the summer crowd is full swing at my work and it will improve after this summer.

  Any help would be awesome.

  Thank you and sorry for the long post.

  Here's the info I get from BlueScreenViewer when you look at the minidump

  Bug UNEXPECTED_KERNEL_MODE_TRAP control chain

  Bug check code: 0x0000007f

  Parameter 1: 0x00000008

  Caused by the driver ntoskrnl.exe

  Plant address: ntoskrnl.exe + 66e09

  32 bit processor

  This forum is for the support of end users, the users of the computer at home, have problems with Windows.  People server all hang out them in the TechNet forums then you might want to try this post it there instead.

• Computer crash: memory dump

  After a system update to install KB973879, KB970653 and KB972036 on 8-26), the system has crashed 3 times on its own, and twice when I removed the Flash DRIVE to the printer with an error message about the memory dump (I don't remember exactly what he said at this point.)  This never happened before the update.  Is it safe to uninstall updates?  My computer is Dell nine, 2 weeks, running Vista.  Thank you...

  Hello

  Clickable link to pictorial fix:

  http://www.techerator.com/2009/08/fix-HP-Pavillion-DV-series-gets-blue-screen-after-Windows-updates/

  More here if necessary:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/e4987701-14fc-4769-9410-1db06616a90a

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Unable to generate a memory dump - here's how...

  To review an appeal by blocking of the system for when a USB stick is connected to the computer system AFTER power, asked me to provide a complete picture of the memory. I install XP for so much BUT never could get a generated image (Rt Clk Desktop / Properties/Advanced/startup & recovery / settings / writing debugging information.)

  The KB below includes a section on creating MANUAL of a dump of memory and it worked for me.  FYI suff...

  http://KB.eset.com/esetkb/index?page=content&ID=SOLN380

  Hello

  Thanks for the sharing of information, because that would help the other members of the community. You can also check this article for memory dump files in Windows XP.

  How to use Dumpchk.exe to check a memory dump file

  http://support.Microsoft.com/kb/315271

• How to remove obsolete downloaded programs files, memory dump window, error reports window xp

  How to remove obsolete downloaded programs files, memory dump window, error reports window xp

  Use the disk cleanup tool in Windows XP to clean several types of files and folders are no longer, you want or need.

  "lauraschenberg" wrote in the new message: * e-mail address is removed from the privacy * _xp...

  How to remove obsolete downloaded programs files, memory dump window, error reports window xp

  http://answers.Microsoft.com/message/422fde34-2f99-464c-B6C9-a36c63e2155b
  Tags meta-tags: performance; windows_xp

  Monday 9 April 2012 08:05:37 + 0000: CreateMessage lauraschenberg

• 0x000000F4 beginning physical memory dump, this is the error message I got when I perform the adaptation of data operation or run heavy programs, and when I play the music of his tempo becomes slower.

  Original title: 0x000000f4 beginning physical memory dump

  STOP: 0x000000f4 (0 x 00000003, 0x89cb3a18, 0x89cb3b8c, 0x805d29b4) beginning physical memory dump

  This is the error message I got when I perform the adaptation of data operation or run heavy programs, and when I play the music of his tempo becomes slower... What do I do? Help, please...

  Hello

  You did changes to the computer before this problem?

  Step 1: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• Computer does not start after falling, goes to the memory dump to the place

  Computer was hit, begins a boot process but that heads directly to the memory dump.

  Info that I hope is relevant:

  Page_Fault_In_Nonpaged_Area

  Stop: 0 x 00000050 (0XCB900000, 0 x 00000000, 0 x 00000000, 0X8053A923)

  Hello

  · What is the number and the model of the computer?

  Follow the steps from the link and check if it helps: you may receive an error message on a Windows-based computer: "STOP 0 x 00000050" or "STOP 0x0000008e": http://support.microsoft.com/kb/903251

• STOP: 0x0000009C (0 x 00000004, 0x80546EF0, B 0, 2000000, 0x00070F0F) States beginning physical memory dump in Windows XP Media Center 2005.

  Original title: MS XP Media Center OS MCE errors Stop.

  Need help to resolve the error on screen blue stop, MS Windows XP Media Center 2005, M_C_E... STOP: 0x0000009C (0 x 00000004, 0x80546EF0, B 0, 2000000, 0x00070F0F) States beginning physical memory dump.

  Measures already taken, not removed MS register of scanning tools, disk cleanup and defragmentation; safe mode and start to the last point of the working configuration.

  Any help with a fix is appreciated before last resort reinstallation of the operating system

  HI T Dawg,

  You did it of any material changes or software on the computer before this problem?

  This problem occurs because the processor of your computer detected and reported an unrecoverable hardware error to Windows XP.

  You can follow this link and check if the problem persists.

  Stop error message in Windows XP, you may receive: "0x0000009C (0x00000000, 0 x 00000004, 0 x 00020151, 0xb2000000).

  Hope the helps of information.

  Please post back and we do know.

• win xp repair not finish, get a physical memory dump BAD_POOL_CALLER

  original title: win xp repair not finish, get a physical memory dump

  I have a PC that would not start so I tried last good start, no luck. Tried safe mode, still no start. So I went to the CD to do a repair, now it happens about 34 minutes (installation of driver/devices) left and it crashes, dump of physical memory (BAD_POOL) the CALLER).

  I tried different CDs, computer and the memory test. I can see the HD as a second HD on my other computer and it scans clean. When I tried to see if it would end the repair connected on the other computer as the main HD, I get the same thing.

  Any suggestions? Wondering if I need to get a new HD or is there another problem? Thanks in advance!

  It is most often caused by having unnecessary USB devices
  devices connected during installation.

  Setup stops responding with 34 minutes remaining

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;828267

• Problem has been detected and windows has been shutdown error STOP: 0x0000008E. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

  Original title: problem has been detected and windows has been shut down. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

  Computer Message: Check if you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video cards.

  Check with your suppliers of material, updates the BIOS. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to start advance startup options, and then select Safe mode.

  Technical information: * STOP: 0x0000008E (0xC0000005, 0x8054556C, 0xADB78A98, 0x00000000)

  Beginning physical memory dump

  Total physical memory dump. Contact technical support for further assistance group.

  Hi fernandomventura,

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: Follow the steps mentioned in the articles below which deals with a similar question

   

  General troubleshooting for an error message that you receive randomly in Windows XP: "Stop 0x0000008E"-restore the system to achieve ".

  http://support.Microsoft.com/kb/945658/

  You receive a random "0x0000008E" error message on a blue screen in Windows XP

  http://support.Microsoft.com/kb/827663

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• System error memory dump files

  Is it safe to delete system error memory dump files after you run a cleaning disc?  Also what are system error memory dump files?

  Hi Cookie5354,

  Basically, error, say a blue screen of death (BSOD) Windows gathers all available information stored in memory at the time of the incident and that she "pours" in a file. The file can then be used by a support technician to determine what could perhaps have the error in the first place. Sometimes, when an error occurs on Windows will ask you if it can information additional NMCS to Microsoft. If you press the Yes button on the request message that appears, then Windows will download the dump to Microsoft Server files.

  Dump files are useful "but" they have the bad habit of taking a lot of space, so it is beneficial remove files to recover the space they occupy. Personally, I use a freeware thrid party application called CCleaner (www.piriform.com) If you use this and look at the bottom of the left side of the window of CCleaner, you will see a list of options what it removes. "Remove Windows error reports" is not checked by default, but I it check every few weeks or so, so that it clears the resports old error that are no longer needed.

  So, in answer to your question, yes they can be deleted.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Physical Memory Dump questions - how do I fix it?

  original title: dump of physical memory

  I am not at all computer savvy, I know how to activate and use the every - word, internet basics. I don't know where post a question so if it is in the wrong place please excuse my mistake.

  I have computer problems... physical memory dump.  It seems this is a common problem so why microsoft does not have a free repair to fix the problem.  If there is one, please report it.  If there is no repair Microsoft how to make fixing it without having to pay $50?  Thank you

  When a BSOD (Blue Screen of Death) the system failure occurs, for most users, there not enough time to fully record what he says. the exact text is important for anyone trying to diagnose what is wrong. You can save time when the error occurs then by following the procedure described below.

  If you already did it disable the auto reboot system error. This should help by allowing the time to write the code to Stop error and related information correctly. Select Start, do a right-click on computer select Properties, advanced, system settings startup and recovery, system failure and uncheck the box before automatically restarting. Re-do not enable automatic restart in the event of system failure after obtaining this information, this setting is the best left to not allow an automatic restart.

  If the failure occurs during the initialization of the computer, you need to try a different approach. You can access the Advanced Options Menu of Windows on multiple computers by constantly pressing the F8 (key) key when starting and selecting the option - disable automatic restart in case of system error. This method is not always easy to use because it may be difficult to press the F8 key at the right time. Try again if it doesn't work the first time. On some computers, a different key must be used.

  Send a copy of your dumpfile as a shared file on your disc of sky with a link here.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

• Cleaning disc does not remove "debug dump and system error memory dump files".

  Original title: clean windows vista disk

  on my drive clean I have 112 mb on the debug dump files and 112 mb on system error memory dump files. My problem is when I try to delete these files from my cleaning disc will not remove these files. could help me with this problem?

  Hello

  1. what happens when you try to delete the files of debugging bump?

  2. do you get any error code or error message?

  3. have you made changes on the computer before this problem?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Start in safe mode and then try to perform a disk cleanup and check if it works.

  Step 1: Start Windows Vista in safe mode:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: Delete files using Disk Cleanup:

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  Method 2:

  Run the scan tool (SFC) System File Checker and check if it helps.

  How to use the tool File Checker system to troubleshoot missing or corrupted on Windows Vista system files: http://support.microsoft.com/kb/929833

  Also check the event viewer on the program that is causing the problem.

  Event Viewer is a tool that displays detailed information about important events on your computer.

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  Hope the information is useful.