Server Terminal Server 2000 running, Memory Dump, restarting and checking bug error 0x0000007f

Similar Questions

• What is error in system memory dump files and is it ok to delete

  can someone tell me what are the system error memory dump files and mini dump files and is it OK to remove them to give me more memory hard drive

  They are for when your computer blue screens, it exports the files of the ram disk for troubleshooting.  Yes, it is safe to remove them if you do disk cleanup.

• Windows 8 refreshment stops at 77% and then restarts and displays an error

  I can't update my Windows 8 Pro because when I do, it stops at 77% and then restarts and displays an error (there was a problem during the update of your PC)

  Hey Sajjad,

  I understand that you cannot update your computer Windows 8.

  1. did you of recent changes to the computer?
  2. Why are you trying to refresh Windows 8?
  I suggest you follow the steps mentioned below and check if it helps.

  Method 1:
  
  I suggest to disable all external devices except the mouse and keyboard and try to refresh.

  Method 2:

  Use the check disk command for all errors on the hard drive.

  Warning: We recommend not to interrupt the CHKDSK process. Microsoft does not guarantee the integrity of the disk if the CHKDSK program is interrupted. Security, you can back up your data before using check disk drive.

  Use the drive control as follows:
  a. press the Windows key + X, and then choose command prompt (Admin) on the shortcut menu.
  (b) in the search box type 'cmd' and ENTER. Right click and select "Run as Administrator".
  c. type at the prompt in the command CHKDSK/p and press ENTER to scan the drive.
  d. type CHKDSK C: /F /R and press ENTER to repair corrupt sectors, if there are.

  NOTE: The root drive must be C: and drive can schedule a task to start the system, if this is the case, press on is to schedule a task, and then restart the computer to run chkdsk.
  When chkdsk is finished, boot up to the desktop, and then check.

  Important: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk to be lost

  You can follow the links below for more information.

  How to restore, refresh or reset your PC:

  
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to create the installation media for a PC refresh or reset:

  
  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  Refresh and reset your PC:

  
  http://blogs.msdn.com/b/B8/archive/2012/01/04/refresh-and-reset-your-PC.aspx

  Warning for update: the applications that came with your PC or you installed on Windows Store will be reinstalled, but all the apps you have installed other Web sites and DVD is deleted. You will find a list of applications on your desktop after you refresh your PC.

  Warning for the Reset: all your personal files will be deleted and your settings will be reset. All the apps that the is come with your PC will be reinstalled, but all other applications will be deleted.

  Hope the above information helps.

  Let us know if you have other questions about Windows in the future. We will be happy to help you.

• Oracle 10.2 64-bit to SQL Server 2000 (32-bit) through DG4ODBC and DBLINK

  Hi all
  
  I need to connect from Oracle to SQL Server through DB-LINK, and since my installation Oracle does not contain of HSODBC, I installed DG4ODBC.
  
  My current setup SW is:
  
  (1) oracle Server (64-bit):
  Operating system: Windows Server 2008 Standard SP2
  DB: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production 64-bit
  Gateway: Heterogeneous Agent 11.2.0.1.0 - 64 bit Production version built with Oracle Database Gateway for ODBC
  Oracle home: E:\oracle\product\10.2.0\db_1\
  Gateway home: D:\apps\product\11.2.0\tg_1\
  In addition, he performs a 10.0 ArcGIS/ArcSDE on Oracle.
  
  (2) MS SQL Server (32-bit):
  OS: Windows NT 5.2 SP2
  DB: Microsoft SQL Server 2000-8.00.2065 (Intel X 86)
  
  There are two headphones running (one of each installation, 10.2 and 11.2) which, I suppose, can lead to conflicts or reduce performance. As a restriction, I need the listener from 10.2 to continue
  
  unchanged running from ArcSDE Service use and re-create them is a pain.
  
  So my question is, how do I configure a (10.2) or two listeners (10.2 and 11.2) use DG4ODBC to connect to a remote SQL Server to Oracle?
  
  I have followed several threads in this forum, try different configurations but I can not connect successfully with the DATABASE LINK. In most cases, I get error ORA-28545 and ORA-02063.
  
  Can someone help me solve this problem? What I need to send more information, for example {SID} init. now, listener.ora, tnsnames.ora, clarifications etc?
  
  Thank you much in advance.
  
  Gaston.

  Hi, Gaston,.
  The following note describes the setting up Dg4ODBC on 64-bit Windows-

  How the installer DG4ODBC (gateway for ODBC Oracle database) on 64-bit Windows operating systems (Doc ID 1266572.1)

  You definitely need 2 separate listeners - one for the 10.2 RDBMS and one for the 11.2 Dg4ODBC. There should be no concern about the performance or other conflicts. The only thing to know is that listener DG4ODBC must use a different port than the 10.2 listener.

  Heike referred to as using a file odbc.ini, but it is necessary when setting up Dg4ODBC on Unix/Linux platforms. Under Windows, the database non-Oracle information in the system DSN that is used for the HS_FDS_CONNECT_INFO parameter in theinit .ora file DG4ODBC.

  Do the following-

  -Configure the gateway as Note 1266572.1 with a listener running of the ORACLE_HOME bridge, in your case D:\apps\product\11.2.0\tg_1\
  -create tnsnames.ora entry in the 10.2 RDBMS directory $ORACLE_HOME/network/admin for the gateway
  -create the database link in the RDBMS using the tnsnames.ora entry.

  If you still have problems then view the files following and information-

  -Gateway listener.ora
  -gatewayinit .ora
  -RDBMS tnsnames.ora
  -create database link statement

  Another point, because you're running on Windows 64 bits, then the ODBC driver that is referred to in the system DSN for the connection must be a 64-bit driver. You cannot use the 32-bit drivers with 64-bit DG4ODBC.

  Kind regards
  Mike

• Windows keeps freezing, then running dskchk to restart and still then freezes Help!

  Last night I've used Skype and some other Web pages open as well when my computer suddenly froze and I had to reboot. When I did, he worked briefly, but froze again. On the second reboot, he said he had to check the drive for consistency. Everything went well and was able to use it again for a few minutes, but when you type in a document in word, I got the blue screen of death, which said BAD_POOL_HEADER. However, after restarting, I not had the BSOD again. It freezes just up during use, runs the check of the drive even again and again, but continues to freeze later. The arrow works, but absolutely nothing else. I can't even run the computer in safe mode.

  I also noticed it says "recovering orphaned files" and "error correction in the index $I30 in file 50705" throughout the dskchk. There was something to find 19 unindexed files as well. In addition, the last time that I have restarted, he said that Skype is a corrupted file. I uninstalled Skype but this does seem to doing nothing at all.

  Looks like there's a LOT of different things going on here and I'm not that great with computers so I don't know what to do. All I can find are forums online and none were particularly useful. I live in the South of Senegal, so I can't exactly go to a workshop to repair either...

  Is - fixable? Please help me!

  Hello

  You did changes to the computer before the show?

  
  Method 1:
  Start in safe mode and then try to run chkdsk.
  See this link for the how to start in safe mode:
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
  See the link to check your hard disk for errors:
  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors
  WARNING: Microsoft does not recommend interrupting the CHKDSK process. Microsoft does not guarantee the integrity of the disk if the CHKDSK program is interrupted. For security, you can back up your data before using check disk drive if you can. Defective sectors found while making the disk check would result in a loss of data.
  
  Method 2:
  I also suggest you to run chkdsk utility fromWindows recovery (WINRE) enviornment and check if that helps you solve the problem.
  Follow the steps below to start the computer using the WINRE and run the chkdsk utility.
  a. Insert the Windows Vista installation disc.
  b. restart your computer.
  c. If prompted, press any key to start Windows from the installation disc.
  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.
  d. choose your language settings, and then click Next.
  e. click on repair your computer.
  f. Select the operating system you want to repair, and then click Next.
  g. on the System Recovery Options menu, select command prompt.
  h. type the command chkdsk C: /f /r and press enter
  Access the link below to learn more about Windows recovery options in Windows Vista.
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

• Computer restart and display BSoD error constantly

  My computer restarts and gives me a blue screen error message.

  Minidump:
  https://SkyDrive.live.com/redir?RESID=27EED93B82BAB133! 120 & authkey =! AFPe1f7a4LP64IA
  
  "It is not a true crash, in the sense that the blue screen was launched only because the combination of material and video driver video was to be insensitive and not because of any exception processing synchronous".

  Since Vista, the components of "Timeout detection and recovery" (TDR) of the subsystem video OS have been able to do some really impressive things to try to find issues that would have led to the earlier OS like XP to crash.

  As a last resort, the TDR subsystem sends a video driver command "Please restart you now!" and wait a few seconds.
  If there is no answer, the BONE concludes that the combo of driver/hardware video has really collapsed in a heap, and it fires at this stop 0 x 116 BSOD.

  If playing with video driver versions did not help, make sure that the box is not overheated.
  Try to remove a side panel and a fan of big sector directly to the motherboard and GPU.
  Run it like that for a few hours or days - long enough to check whether the cooler temperatures make a difference.

  If so, it could be as simple as dust accumulation and inadequate cooling afterwards.

  I download cpu - z and gpu - z (both free) and keep an eye on the video time

  For more information please read this blog http://captaindbg.com/bug-check-0x116-video_tdr_error-troubleshooting-tips/  

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff557263%28V=vs.85%29.aspx

• ORA-04031: unable to allocate 32 bytes of shared memory ('shared pool'.  Check your error messages for the cause of the error. (= < POINTER >)

  Dear team,

  We have for instance R12.

  DB - 11.2.0.3

  12.1.2 - application

  in this concurrent instance depressed frequently when checking of log file showing the error as

  List of errors encountered:

  .............................................................................

  _ 1 _

  Systematic FDPCRQ met an ORACLE error. ORA-04031: unable to

  allocate 32 bytes of shared memory ('shared pool'.

  Check your error messages for the cause of the error. (= < POINTER >)

  .............................................................................

  APP-FND-01388: cannot read the value for the profile FND_MGR_STRTUP_THRES_TIME option in the routine, and routine.

  List of errors encountered:

  .............................................................................

  _ 1 _

  Routine AFPCAL has received the code of failure while running or analysis of your

  simultaneous program CPMGR

  
  

  Examine your log file of concurrent application for more information.

  Make sure that you pass arguments in the correct format.

  Post: WARNING: mail_queue_enter: create file maildrop / 379309.437: permission denied

  Please guide me to solve this problem.

  Concerning

  Kumar V

  Dear Kumar,

  I suggest you to check the FND_NODES table

  1) connect to SQLPLUS as the APPS user and execute the following statement:

  Select CONCURRENT_QUEUE_NAME in the FND_CONCURRENT_QUEUES where CONCURRENT_QUEUE_NAME like '% FNDSM ';

  (2) If you have found that FND_NODES table with entries incorrect node (old node from the Source Instance), and then run the query to clean below

  EXEC FND_CONC_CLONE. SETUP_CLEAN;
  COMMIT;

  (3) then run AutoConfig on all stages, firstly on the DB layer then APPS and webtiers levels to repopulate the necessary system tables,

  and make sure that you are now able to see the correct entries in the FND_NODES table and start the application services.

  Kind regards

  S27

• I've been running Movie Maker OK. I stopped and restarted and now getting error not specified

  I've been running Movie Maker on Acer ASpire 5920 - Vista 32 - Home premium. I had imported from my Sony cameras via firewire 3 hours of recording in multiple files - because of hits from 3 hours. In the end, I closed Moviemk. Subsequently, I clicked on the shortcut to run again and it failed with an error whenever I tried the box "unknown error." I'm under v6.2006 18273.  What can I do now?

  I've been running Movie Maker on Acer ASpire 5920 - Vista 32 - Home premium. I had imported from my Sony cameras via firewire 3 hours of recording in multiple files - because of hits from 3 hours. In the end, I closed Moviemk. Subsequently, I clicked on the shortcut to run again and it failed with an error whenever I tried the box "unknown error." I'm under v6.2006 18273.  What can I do now?

  =======================================
  No guarantee, but the info may be worth...

  Good luck...

  Movie Maker does not start - unknown error - a solution
  http://www.eggheadcafe.com/software/ASPNET/33780259/Movie-Maker-does-not-start--unspecified-error--a-solution.aspx

  =====

  Windows Movie Maker - unspecifed error
  http://forums.Lenovo.com/T5/IdeaPad-Y-U-B-and-Z-series/Windows-Movie-Maker-unspecifed-error/m-p/43365

  =====

  Posted by: Alistair

  Re: Movie Maker does not start - unknown error - a solution

  I too struggled to find the simple answer of any of this info - but it
  boils down to:

  (1) type "Cmd" in the start search box, this will open a black
  DOS command window - it will probably be already in your
  User name of "c:\Users\" directory

  Type 2) in CD AppData\Local
  (you should now show as in)

  "c:\Users\\AppData\Local)

  (3) type Attrib - r press Temp... Come in
  ... and that's it - Movie Maker must start now ok.

  ====================

  Original thread:

  Movie Maker does not start - unknown error - a solution
  http://www.Vistaheads.com/forums/Microsoft-public-Windows-Vista-music-pictures-video/321576-Movie-Maker-does-not-start-unspecified-error-solution.html

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Blue screen and continuous restarts and repeat. Error code given: ___STOP: 0x00000007E (0XC0000005. 0X87F23B2, 0XF793D26C, 0XF793CF68)

  Today, I started my computer as usual worked well. After about 30 minutes of use it has restarted without having to provide me at all. When the computer reboots, it starts as usual, after the XP loading screen, it goes to blackscreen for a second, then a blue screen error message appears, then disappears. The error code given is:

  STOP: 0X00000007E (0XC0000005. 0X87F23B2, 0XF793D26C, 0XF793CF68)

  I managed to take a picture of him just during one of the reset and got this. Incase you need to see the full message. http://img21.imageshack.us/img21/9268/1image0421.jpg

  Initially I thought it was a stick of RAM going bad, so did reinstall each stick etc. to know who does what, and all the sticks started the computer at this point where I get the blue screen. Then maybe this issue is not a RAM? I have NO idea what this error code is... Does anyone have an idea? I did my share of research on the internet and that you have not really found any answers for my situation.

  Solved. I put in my XP CD and booted from it, press ENTER for a new installation, then to the next option, press 'R' or a repair installation. After he went on his own thing, its up and running again, and all my files/preferences have been saved too. The only thing that was wiped out was my WINDOWS folder, so I just need to download IE8 and updates for XP etc.

• XPS 8700 suddenly slow restart and check

  My 8700 previously fast Dell with 12 GB of ram has suddenly slowed to a crawl when restarting or commissioning. The problem occurs before any hard drive activity starts.  So, when I reboot, and after that the shutdown procedure occurs, the screen goes into mode "Eve" (orange), white light button / stop of the Tower remains on. The computer is then silent for about five minutes before the screen comes alive, turns on the led drive activity, and the start-up procedure occurs.  From this point, start-up is fast.

  If I turn off completely, when I boot, the power light turns white, the display shows a Dell logo in a circle.  There is no Caterpillar goes in a circle of about five minutes. There is no disk activity.  Suddenly, after having sat there, the Caterpillar appears and the computer starts up quickly from that moment.  Basically, the Dell logo without Caterpillar takes several minutes when it is used to take a few seconds.  If I hit F12, it won't beep until after five minutes is complete.  So, the problem is very early in the boot process, I guess.

  I shut down the computer, pulled out the plug.  Removed all USB cords.  Holding the switch down for thirty seconds, then re-inserted all the cords and propelled upwards. That does not solve the problem.

  I have the BIOS A03 delivered installed on this machine that was purchased almost exactly a month ago. I have not tried to update the BIOS for fear that I might make things worse because the computer was fast a week or two ago.

  Online diagnostics refuses to start. Have not knowingly changed anything in the BIOS settings. Did not run diagnostics from the F12, but will.  Cannot see how to activate the detailed MESSAGE.

  See my similar thread with a couple of possible solutions (doesn't sound like your question but maybe there's some common ground there):

  http://en.community.Dell.com/support-forums/desktop/f/3514/t/19537836.aspx

• 0x000000F4 beginning physical memory dump, this is the error message I got when I perform the adaptation of data operation or run heavy programs, and when I play the music of his tempo becomes slower.

  Original title: 0x000000f4 beginning physical memory dump

  STOP: 0x000000f4 (0 x 00000003, 0x89cb3a18, 0x89cb3b8c, 0x805d29b4) beginning physical memory dump

  This is the error message I got when I perform the adaptation of data operation or run heavy programs, and when I play the music of his tempo becomes slower... What do I do? Help, please...

  Hello

  You did changes to the computer before this problem?

  Step 1: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• Convert an Esxi 4 2 Server VM runs extremely slow

  Hello

  I am very new to virtualization and have just the configuration server ESXi 4 that will replace the VM Server 2 systems we tested.  Recently, I tried to convert one of my server-2 VMs (Using the 'Converter Standalone Client') a VM (Version 7) Infrastructure.  After two days of continuous operation, the converter was only 5% finished and was transferring data to 24 kb/s (the server is ~ 150 GB in size).  This seems to be extremely slow and I hope that there is something that I can do to speed up that this server should run during opening hours and I like that, I can't take it down more than the weekend.

  I ran the converter Client on the server that hosts the virtual machine, and that server and the ESXi have dual network adapters connected to a managed switch of FD 100 MB.  (They are both on the same switch).  The virtual machine was not working and there was almost no other network activity going on during the conversation.

  Any help is appreciated

  The goal is to eliminate the things that it is not. Download your installation as simple as possible. I don't know what your problem is, but it certainly seems like a network problem. A single 100 MB network adapter should work much faster than the speed you receive.

  Other things to eliminate are pass the port problems, configuration issues, cable issues, NIC

  Run something like wireshark as you begin your conversion. See if you notice any problems in the capture.

  Create a new fresh installation of the VM on the ESXi host and check the flow rate etc. You don't want to go to production if you have problems. Monday will not be fun if you do.

• error message saying "TESV.exe - bad Image. d3dx9_42.dll not is either not designed to run on Windows or it contains an error.

  original title: Skyrim .dll error
  When I press play on the Skyrim Launcher button, nothing happens. I tried to open the folder and run the TESV.exe and got an error message saying "TESV.exe - bad Image. d3dx9_42.dll not is either not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the software vendor"I run Windows 7 Ultimate, and I've updated all my drivers and directX and uninstalled and reinstalled Skyrim repeatedly. I replaced the DLL in question and also organize sfc/scannow. Nothing seems to work, I tried all of the solutions I found online, nothing helps.

  I really want to start playing this game... huge fan of Elder Scrolls...

  Hi MattHamlyn,

   

  1. did you do with the last changes made to your computer before this show?

  2 you are logged as administrator?

  3 you are installing the game online or using a CD/DVD?

   

  
  

  I suggest you to follow the steps below and check.

   

  Method 1:

  I guess that your operating system is Windows 7 64 bit.

  1. click on the Start button.

  2. Select computers

  3. click on your C: drive

  4 program Files (x 86)

  5 steam
  6 Steamapps

  7 common

  8 Skyrim

  9 TESV
  TESV is the game itself.

   

   

  Method 2: put the computer to boot and check if you can play the game:

  http://support.Microsoft.com/kb/929135

  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

   

   

  I hope this helps.

  Thank you.

• Terminal Server license EXPIRING under Advanced Server 2000 Services

  We will be upgrading to a new server (using windows Server2008) S/W & hardware with a new provider in the next 6 months. However, we need to use Terminal Server services for the next 6 months on our current Server 2000 advance server until we have transitional...

  We just started having this message when logging in remotely: "your Server Terminal services temporary client license will expire in 13 days. Please contact your system administrator to get a permanent license. »

  Although advanced server 2000 is not supported, we need to access the remote server for about 6 months until we do the transition...  We are a very small medical office and if we cannot access the server remotely, we are in big trouble! Our doctor S/W is old and is no longer sold or taken in charge by the seller.  We were told that it would not go on the latest server software that is available.

  Is it possible to temporarily reactivate (period 6 months) the license for Terminal Server services?  I thought we had a permanent license and have never seen this message before. My guess it is initially set to expire at that time.

  Is there something we can do?  Registry editing? Y at - it another software that we could use instead of the Terminal services Server to temporarily access the Advanced server 2000 remotely, once the Terminal Server services license expires? Can we buy a license 'enewal"for a period of 6 months/1 year until we have to transition?

  I hope someone can help us, any help is greatly appreciated!

  Hello

  You can ask your question on Windows Server here on the TechNet forums. They are a team who assists the server problems.

  https://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer

  Hope the helps of information.

• all domain controllers are running windows server 2000 with the company wants to set up a more secure network server OS the company will modernize the ADS?

  you are the network administrator for abc.com domain. All domain controllers are running windows server 2000 with the company wants to set up a more secure network server OS the company will modernize the ADS?

  Please repost your request in the appropriate in the Windows Server Forum.  Thank you!