Menu background looping stops and black for a second before you begin the movement again

Similar Questions

• Since the upgrade to 8.0, when navigation between screens, my computer screen becomes black for 1 second before the screen is redrawn. This happens regularly and is a major nuisance. It simulates a power failure. It does not happen with IE.

  Since the upgrade to 8.0, when navigation between screens, my computer screen becomes black for 1 second before the screen is redrawn. This happens regularly and is a major nuisance. It simulates a power failure. It does not happen with IE.

  Here I answer to my problem: I upgraded my graphics card and the problem seems to have disappeared.

• PS CC load and freezes for 45 seconds before anything can be done.

  PS CC load and freezes for 45 seconds before anything can be done. Even the red x in the upper right is frozen during those 45 seconds, then everything is gone. I'm running on Windows 7 Professional with 32 GB of ram.

  It makes no difference if the GPU is enabled or disabled.

  Can anyone help?

  Thanks in advance

  Paul

  Hi raffeld,.

  I suggest you to please disable the Welcome screen and also do you have images in the library of Photoshop or not?

  Kind regards

  Tanuj

• How to clear the output buffer, possibly resize and burn again, before you begin the task of output

  I use PyDAQmx with a USB-6363, but I think the question is generic to DAQmx.

  I have an output buffer that I want to be able to (re) write to without starting the task output.

  More specifically, I have a graphical interface and a few sliders, the user can move.  Whenever the slider changes, a new set of values is loaded into the buffer output through DAQmxWriteAnalogF64.  After you set the value, the user can click on a button and start the task output.

  In some cases the change in cursor does not require a change in buffer size, only a change in the data.  In this case, I get the compalint following DAQmx as they tried writing:

  The generation is not yet started, and not enough space is available in the buffer.

  Set a larger buffer, or start the generation before writing data more than content in the buffer.
  Property: DAQmx_Write_RelativeTo
  Value: DAQmx_Val_CurrWritePos
  Property: DAQmx_Write_Offset
  Corresponding value: 0
  Property: DAQmx_Buf_Output_BufSize
  Corresponding value: 92

  In other cases the change in cursor requires both change in the size of the buffer and data modification.  In this case, I get the following, but only after that do a few times each time increase the size of the writing.

  DAQmx writing failed because a previous writing DAQmx configured automatically the size of output buffer. The size of the buffer is equal the number of samples written by channel, so no additional data can be written before the original task.

  Start the generation of before the second writing DAQmx or set true in all instances of writing DAQmx Auto Start. To gradually write to the buffer before starting the task, call DAQmx Configure an output buffer before the first writing DAQmx.
  Task name: _unnamedTask<0>

  State code:-200547
  function DAQmxWriteAnalogF64

  I tried to configure the output via DAQmxCfgOutputBuffer buffer (in some cases, by setting it to zero or a samples, then save again, in an attempt to clear it) but that doesn't seem to do the trick.

  Of course, I can work around the problem by loading data only when the user clicks the end button, but not what I'm asking here.

  Is it possible to "remake" the writing of output before you begin the task?

  Thank you

  Michael

  Today I have no material practical to validate, but try unreserving task before writing the new buffer:

  DAQmxTaskControl (taskHandle, DAQmx_Val_Task_Unreserve);

  With a simulated device, he made the error go away in case the buffer is the same size.  You will need to validate if the data are in fact correct, but I think it should be (unreserving I would say reset the write pointer so the old buffer are replaced with the new data).

  I always get errors when you try to change the size of buffer if (on my 6351 simulated).  I posted some similar mistakes about the reconfiguration of the tasks here, I guess it is possible that this issue has also been set at 9.8 (I always use 9.7.5 on this computer).  If the behavior is still present in the new driver, and also appears on real hardware (not just simulated), then it seems that this is a bug of DAQmx someone at OR should be considered.

  I wrote a simple LabVIEW VI that captures the error in order to help people to NOT reproduce it:

  

  The best solution at the moment would be likely to re-create the task if you need to change the size of the buffer (or avoid writing data until you are sure what will be the size of buffer).

  Best regards

• How can I fix iphone and ipad to recognize my printer air.  I t o disconnect the printer and wait for 30 seconds before reconnected and then they both recognize the printer

  How can I fix 6s iphone and ipad air when they do not recognize my printer air.  After unplugging the printer for 30 seconds, they can connect to the printer

  Hey robertafromnull,

  Thank you for using communities Support from Apple. We can see from your post that you are having problems with printing of your devices on a printer of Air and that it would be happy to provide advice to solve this problem.

  Let's start by going to the section called "If you can not print on your AirPrint printer" in this link here: Topic AirPrint. This should contribute to help you get started with you back to printing from your iPhone / iPad. Let us know if this can help, or if you encounter any problems.

  Kind regards.

• Whenever a new window (or even Firefox windows program such as Add-ons, bookmarks, settings, etc.) is opened, Firefox hangs for 30 seconds before you open it.

  I have reset Firefox, then reinstalled, removed all extensions and plugins, uninstalled and reinstalled Flash Player, Java updated, etc. I also created new profiles, which have the same problem.

  The problem does not appear in Mode safe, which is strange because I have disabled all of the built-in extensions and you run the program in normal mode, and the problem persists. At the moment I don't use any extensions, plugins and none of the themes and Firefox still freezes for a short period of time whenever I try to open a new window.

  This problem does not occur in IE or Chrome. I have not installed any programs recently; the problem started happening randomly.

  Hello

  Safe mode also disables themes (appearance) in (Alt + T) Tools > Add-ons. and hardware acceleration - the manual setting is in Tools > Options > Advanced > general > use hardware acceleration when available. All these settings/options/additional custom modules can also be individually or collectively disabled/enabled/changed to normal mode of Firefox to see if a theme, or hardware acceleration is causing issues. Deactivation/activation of hardware acceleration and some types of modules in normal mode may require a restart of Firefox - is a fast way to restart Firefox press SHIFT + F2, type reboot and Enter.

• I used Windows registry free edit and there no return upwards before you make the changes, and now my compyuer is SLOW

  Can anyone recommend a good registry Fixer-fix?   I've used Windows free Registry repair and she saved before it changed things, but there is no thought. My machine would hardly do anything, so I restored back upward by the software registry repair that I used to use. That has helped some, but my system is still VERY slow, almost like he wants to plant. Give me advice? Or to recommend program?

  Windows XP Professional SP3 32-bit

  I haven't used this registry cleaner, or use Registry cleaners at all because it can mess up your pc if you know exactly what you are doing.

  Malwarebytes is not an antivirus, it is a removal of malicious software, if you don't have an antivirus, you should not be connected to the internet. However, MSE is a software free antivirus you can download it here:

  Microsoft Security Essentials download

  http://www.Microsoft.com/security/PC-security/MSE.aspx

  I watched most of tutorials for Macrium reflect, and most of them say they are to restore the entire disk, the free version.

  The pro version offers replacement of individual files, I assume you are using the free version.

  If your system is backed up, then I just restore the version that has a good record, if it is backed up nightly registry should be also.

  I don't know how to restore the registry, I recommend that you restore the entire disk, however, if your system was executed without an antivirus, I would make a perfect relocation with full formatting.

  Or you can run the following tests:

  Download, install, update and scan with these full free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  http://www.Microsoft.com/security/scanner/en-us/default.aspx Security Scanner   

  http://www.eset.com/us/online-scanner/ eset online scanner

• The video file can be published to the specified location. Check that the publishing location is still available, that there is enough free space on the disk, and then republish the movie again.

  It happened once before, but it somehow went away after I restarted my laptop. I restarted my laptop, this time, but it has not worked.

  ~*~

  OK, so I just finished put a video together. It consists of a Hypercam 2 record (which means it's a .avi file), a PNG image, text and a song (which is a WMA file).

  ~*~

  I save the file, and then click Publish Movie. Everything goes well until the last step where the video is actually published. The window made a break for a while before you receive the following message;

  ~*~

  "Cannot complete the movie publish .

  The video file cannot be published to the specified location. "Check that the publishing location is still available, that there is enough free space on the disk and then republish the movie again."

  ~*~

  I know there are a lot of free space on the drive on my laptop (it's an Inspiron 1520), and that there is nothing wrong with any of my files. I tried to change places without result. It simply doesn't get it. It would be a great help to me if someone could tell me what is the problem :)

  ~*~

  Thank you very much

  Len

  Microsoft Windows Movie Maker is not to let me publish my movies

  Hello

  I suggest you try the steps mentioned in the link given below.

  Error message when you try to publish a movie using Windows Movie Maker in Windows Vista: "cannot complete publish movie.

  http://support.Microsoft.com/kb/930435

  Additional information:

  Solve problems with publishing a movie to your computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-publishing-a-movie-to-your-computer

• How I continuously loop frames with pause for 20 seconds in each image of the scene even without going to the next scene?

  How I continuously loop frames with pause for 20 seconds in each image of the scene even without going to the next scene? There are buttons for other scenes in these images. The below works well until I got to the last frame of the scene, then he goes to the next scene and plays. How can I make one loop continuously.

  Stop();

  var: timer = new Timer (20000,0); / / <--

  timer.addEventListener (TimerEvent.TIMER, timerHandler);

  Timer.Start ();

  function timerHandler(event:TimerEvent):void {}

  this.nextFrame ();

  or if you want to jump for example 5 executives

  this.gotoAndStop(this.currentFrame+5);

  }

  Thanks for any help.

  If you want to stop your timer, use the stop() method:

  Timer.Stop ();

  PS when you use the adobe forums, please check the useful/correct, if there is.

• Satellite C660-1J2 - the screen goes black for a second

  Hey everybody.

  I recently changed my HARD drive and did a reinstall fresh, as previous was damaged. What is happening now is that whenever I have connect or disconnect the cable the screen goes black for a second. There is no real consequence of this, I'd rather just if there was an option to make it happen.

  Then, give a shout someone if you know how to deal with this.

  Hello

  > I have recently changed my HARD drive and did a reinstall of fees
  You have installed Windows from Toshiba normal Microsoft Windows disk or recovery disk?

  To me it sounds like that, you forgot to install the display driver. Also check the Manager of devices for the yellow exclamation points or unknown devices.
  Make sure that correct display driver is installed. You can download the latest version of Toshiba's official website:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Check this box!

• Satellite P300D connected via HDMI to TV - screen becames black for a second

  I have the Satellite P300D.
  But now I have a problem with the P300 HDMI port.

  I have connected to my TV via HDMI.
  The photo is here.
  Every two minutes the black screen for a seconds fue becames, then the picture comes back.
  It is very annoying when I watch a movie.

  Is there a problem with a hdmi cable or with drivers?

  Is it possible to get this working?

  Thanks for any help

  > Is there a problem with a hdmi cable or with drivers?
  Who knows?  :| I think that you will have to test it.

  You could try to reinstall the HDMI Control Manager. This driver is required for your HDMI controller.
  If the question will always be, I recommend that you test different HDMI cables.

• Hot flashes black for a second opening alarm application

  Z3 compact, since updating to 6.0.1, Marshmallow everytime, I open clock/alarm app the screen flashes black for a second or 2 before showing open

  Hi, tried your suggestion that did not help, then I realized the smarter app permission because the clock was turned off & that fixed the issue.
  Thanks for your help anyway

• When windows update (KB968930) power Shell2.0 and WinRm20 for win Vista tries to install the thugs of the computer then restarts and crashes again and again

  • When windows update (KB968930) power Shell2.0 and WinRm20 for win Vista tries to install the thugs of the computer then restarts and crashes again and again

  Hello LisaQuaranto,

  I suggest that you configure the computer to start in minimum mode, download the update from the Download Center and try to install the update.

  To perform a clean boot on a computer that is running Windows Vista:

  a. Click Start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  b. on the general tab, click Selective startup.

  c. under Selective startup, clear the check box load startup items.

  d. click OK.

  e. When prompted, click on restart.

  f. after the computer starts, check if the problem is resolved.

  If your problem is resolved after the clean boot, and then follow the steps in the following article to narrow down the exact source:

  http://support.Microsoft.com/kb/929135

  In addition, refer to the section on how to restore your computer to a Normal startup mode by following the steps under "Reset the computer to start as usual", after performing the clean boot troubleshooting.

  You can download the update following the link below:

  http://support.Microsoft.com/kb/968930

  Thank you
  Irfan H, Engineer Support Microsoft Answers

• Discovered that I can't attend Photoshop World Expo unless I have sign up for PSW and pay for classes. I have attended the past 2 years and have learned a lot about the mini classes at the Expo, so why I'm not welcome this year?

  Discovered that I can't attend Photoshop World Expo unless I have sign up for PSW and pay for classes. I have attended the past 2 years and have learned a lot about the mini classes at the Expo, so why I'm not welcome this year?

  Hi Thomas,

  I'm afraid that you ask in the wrong place. Photoshop World is organized by Kelby Media, and the web site is

  http://PhotoshopWorld.com/

  On this site, there are a few suggestions (e-mail and telephone) contact:

  

  I hope this helps!

  Mike

• Hi, I bought a new laptop and I would like to install Photoshop 5.5 Extended for the new laptop computer. Something to consider before you begin to install?

  Hi, I bought a new laptop and I would like to install Photoshop 5.5 Extended for the new laptop computer. Something to consider before you begin to install?

  The reason is to avoid any inconvenience. What do I need to uninstall Photoshop beforehand?

  Thanks for the tips

  The mobile fact have separate start-up and data readers?  If so and the boot drive has limited space, you may want to consider relocation of things like bridges on the data disk cache.  I can't think another thing to consider from the start, however.