Satellite P300D connected via HDMI to TV - screen becames black for a second

Similar Questions

• Satellite C660-1J2 - the screen goes black for a second

  Hey everybody.

  I recently changed my HARD drive and did a reinstall fresh, as previous was damaged. What is happening now is that whenever I have connect or disconnect the cable the screen goes black for a second. There is no real consequence of this, I'd rather just if there was an option to make it happen.

  Then, give a shout someone if you know how to deal with this.

  Hello

  > I have recently changed my HARD drive and did a reinstall of fees
  You have installed Windows from Toshiba normal Microsoft Windows disk or recovery disk?

  To me it sounds like that, you forgot to install the display driver. Also check the Manager of devices for the yellow exclamation points or unknown devices.
  Make sure that correct display driver is installed. You can download the latest version of Toshiba's official website:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Check this box!

• Since the upgrade to 8.0, when navigation between screens, my computer screen becomes black for 1 second before the screen is redrawn. This happens regularly and is a major nuisance. It simulates a power failure. It does not happen with IE.

  Since the upgrade to 8.0, when navigation between screens, my computer screen becomes black for 1 second before the screen is redrawn. This happens regularly and is a major nuisance. It simulates a power failure. It does not happen with IE.

  Here I answer to my problem: I upgraded my graphics card and the problem seems to have disappeared.

• my screen go black for a second or two wy?

  "HP Pavilion p6152f desktop computer
    
  Product number: NP220AA. For a second or 2, my screen go black don't any changes made before the beginning of the problem and any error messages. Hope I chose the good advice for this problem.

  Hi mama23, what kind of graphics card you have? Please try to update to the latest drivers for the graphics card, also check that the power cable and the DVI monitor cable are connected, if you have another cable dvi, I want to pass to be sure it is not the cable, thank you, Adi

• Satellite P300 connected via HDMI receiver Onkyo 607 - no sound

  Hello

  I have the Satellite P300 1BB for awhile and I'm very happy with it. But now I have a problem with the P300 HDMI port. I connected with my Onkyo TX - SR 607 5.1 receiver HDMI. The image is there, but there is no sound. If I connect the P300 directly to my plasma tv, then there's sound through HDMI.

  I have updated the Conexant audio driver to version 4.83.1.0. The Panel mixer, audio, the audio driver for AMD HDMI Conexant is not connected when I use the 607. It is connected (and works perfectly) if I use the plasma tv.

  Is it possible to get this working?

  Hello abdoulraak

  Please don't be crazy about me, but how you write that you have problems with port HDMI on Satellite P300 when working with TV. I think you have problem with your receiver Onkyo 607.
  All of these updates will be not useful at all and you should check s manual Onkyo to see how it works and what kind of parameters that you can use the receiver itself.

  You have activated a right channel of the receiver? I have big receiver Technics and all the ports on the back will be used with a separate channel that needs to be enabled.

  See receiver manuals and collect information how it works exactly.

• Lenovo ThinkPad Edge 15 - screen becomes black for a while when connected/disconnected.

  Hey,.

  I have a problem with my Lenovo. The problem is that whenever I have plug or unplug the adapter to my pc, the screen goes black for a second about. I don't encounter this problem before, it started to happen a week or 2 ago.

  I also put in place a video on this topic to get a better overview:

  http://Tinypic.com/player.php?v=2l9r2ts&s=5

  Any help is appreciated!

  OK, I got it fixed now. Turns out it was my old graphics driver. Just updated my driver and woila. This works. Could not even think that this would have been the problem tho xD

  So if anyone else has this problem, then try to update your graphics driver.

• Satellite C660-1RQ cannot connect via HDMI to the NEC projector

  Hello.

  I have laptop Toshiba C660-1RQ.
  It can not connect via HDMI to the NEC projector.
  I tried many drivers - the 268,57 (taken from the Toshiba site) to the new 331.58

  I thought, that it my problem, but the same lapto (my friend work - we have a few these notebooks in company) works well...

  And my HDMI works with monitors, TV (but sometimes!), etc.

  I don't know what to do...

  > And my HDMI works with monitors, TV (but sometimes!), etc.

  If s computer laptop HDMI port works correctly in relationship with other devices, I think that the problem is related to your laptop.

  What happens exactly when the projector is connected? Can you pass to the external video using the FN + F5 key combination?

  The use of Fn + F5 keys can toggle between internal and external display.

• U2715H, connected via HDMI or through DP?

  Hello.

  I have a U2715H monitor and consider buying a more. My video card has only one output port of DP. Where my questions:

  1. If I connect the second monitor via HDMI, the U2715H still will work at maximum capacity?

  2 would it not be better to use a CDM (male) to HDMI Cable (male) to connect the monitor instead of a (male) HDMI to HDMI Cable (male)?

  3. how worth it would be that would buy a new video card (which has several ports of DP) it?

  Note: I hesitate to do that because I met major problems after installing a new map recently and had to revert to the original. But I'll try again, if my monitors don't work 100% connected via HDMI.

  Thank you!

  Display port will give you 4K.  HDMI will not

• SP2309W won't go into energy saving mode when connected via HDMI

  Hello

  I just got 2 SP2309W, and I love them, the only problem I encounter is just one of them (the one connected via HDMI) is not in power saving mode, even when I turn off my laptop. Is anyone else having the same problem?

  I have connected the monitor via VGA and DVI and the energy saver works fine but it does not work with HDMI

  I have a XPS 1530, Intel Core 2 Duo processor T9300with a 256 MB NVIDIA GeForce 8600 M GT video card.

  My XPS has a HDMI and VGA input so I have a monitor connected via VGA and the other via HDMI and even when I go around, always one connected via HDMI is not in the standby power mode even if the laptop is turned off (or when he goes to sleep).

  Thanks for your help,

  Ivan

  We left three SP2309Ws on all night to disconnect the HDMI cable and in STFC mode and came this morning to see the message from MONIQUE always there. They all didn't say, 'no HDMI cable. This is normal. In fact, we have tested on several other models of monitors and they all do the same thing.

• HP Pavilion g7 screen became black all in use.

  Help, I was using my HP Pavilion g-7 the other day, while the game and the screen became black without reason appairent.  I have not loaded down recently and I run the anti-virus software.

  We went to the HP support website and went through several diagnotics.  When you restart the laptop the screen on the laptop starts flashing images of my top of counter, but once the machine starts the screen remains empty.  You can see the glow on the edges, but that's all.  I have another connected currently monitor and the system works fine except for that.  We also have the following, hard reset, Test for memory modual problems, test the hard drive.  I also tried to update the video drivers, but the system tells me that the drivers do not work properly.

  It's very frustrating because I'm a student and really need my laptop.  Any help would be greatly appreciated!

  Thank you in advance,

  ACameli

  Hi ACameli,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP Pavilion Notebook g7 and get a blank screen or black at startup. Try perform a reset. When you perform a hard reset note remove all USB devices and remove cards memory card reader location. Disconnect all non-essential devices. If that doesn't help try to turn on the computer, on which you begin to press F11 repeatedly until the menu opens. You can do a System Restore. System Restore will restore the computer to a time when it worked correctly. If you are able to see the book then connect to a monitor, it is not the graphics card or HARD drive. It could be the LED. The only way to find out is to check with a repair shop. LED can be tested in the DMM and they would have to this device. I'd be happy to help you to give you a number if necessary. How can I find my model number or product number?

  Please let me know.
  
  Thank you.

• Pavilion 11 x 360: my screen goes black for a while after plugging my charger

  After upgrading to Windows 10 whenever I insert my charger the screen goes black for a few seconds and comes back again, and the system takes a long time to start with a black screen before the lock screen... Please help... his frustration

  Hello

  I found this microsoft article that covers some common troubleshooting steps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-performance/black-screen-when-charger-is-plugged/a96fdb19-4745-4513-b889-c6cfd34413d8

  You can also check to see if your computer has switchable graphics. Here's another thread that might help with this question - http://h30434.www3.hp.com/t5/Notebook-Display-and-Video/Switchable-Graphics-Cards-on-Windows-10-8-1-8/td-p/5161345

  I hope this helps!

• * Media Player stops. My drive stops, then recovers itself after a few seconds. Screen goes black for 1-3 seconds, BUT Audio continues!

  I have Vista Ultimate, but I'm not very smart PC!   When I try to watch a video clip, etc., SEE above EDIT.  My drive stops, then recovers itself after a few seconds.  Screen goes black for 1-3 seconds, BUT Audio continues!  Then Visual back for a while until that the same thing never happens again anywhere!  Also the FAN spins-up like a jet plane taking off!   Help, please.  Thank you.

  Hi Peter,.

  1 have had any changes made on the computer before the show?

  2. which media player you use to play the video?

  3. the problem occurs on all the video clips?

  I would say as update you the video card drivers and check if the problem persists:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the problem is not resolved, please respond with more information to help you best.

  Thank you.

• The bottom half of my screen became black - how get rid of it?

  original title: we pick up the Windows forum for a background of vocation, half of my screen became black - how get rid of it?

  I probably pushed a wrong button, but... the bottom of my screen is back and I lost the buttons "file, editing, etc, as well as all the icons at the bottom of the screen.

  Hello

  have you changed the screen resolution?

  Right-click anywhere on your desktop, and then select the screen resolution.

  What is your screen resolution on?

  -What was she before the value?

  B Eddie

• Black screen when going for a second AC adapter / CC is plugged or unplugged.

  Hi all

  I tried to contact the HP support with the issue, but their technicians say that this problem is a problem so here goes from Windows:

  I use PC HP ProBook 4540 s (Energy Star) with Windows 8 x64bit. All of my drivers, BIOS, and compatible HP drivers are updated with the latest versions of the Windows updates. The problem I encounter is that the goes to black for a second or two screen when the power adapter is Plugged-in or unplugged.

  Personally, I think that the problem is related to graphics switchable but don't know how. So far the HP gave me and I tried the following, but to no avail solutions:

  HP has proposed the following

  1. check and see if the problem persists in safe mode

  Result: There is no such a problem in safe mode. Nothing happens when the power adapter is plugged in or unplugged. Screen does not change its brightness or black,

  2. update your BIOS to the latest version

  Result: BIOS is already up-to-date

  3 follow these steps:

  (a) turn off PC

  (b) remove the adapter and any attached external devices

  (c) remove the battery

  (d) press and hold the Power button for 20-30 seconds (this will ensure to remove any residual current)

  (e) turning on the PC using only the AC power

  Result:  Has not made a difference, the problem persists

  Share there is a problem with my laptop, its brand new I bought it last month. I would appreciate a solution and please do not ask me to run to troubleshoot because it has not helped OR nor did reinstall Windows 8 makes all the difference. Thank you

  I just bought this laptop yesterday and I had the same problem as you.   But I think I found the solution.

  What you need to do is 1) go into your power settings, by clicking on the icon of your battery.

  (2) then choose change settings of either "star power balance and energy" or "Energy saving" matter which.

  (3) once you do this, go to "change advanced settings" (must be higher where you adjust the brightness of the screen).

  (4) then go to the left and choose the option that says "Intel HD graphics" and click there and CHANGE the setting to 'maximize the battery' and change to 'optimize performance '.

  It was fixed without 'maximize battery' on mine.

  Once you do this, the problem will be completely solved!

  I hope this helps.

• Satellite A100-062 - connect via HDMI LCD monitor

  Hello

  I wish I could connect my laptop Satellite A100-062 to LCD TV.
  The TV has a HDMI input. I understand that I could get a cable to connect DVI to HDMI, but I'm not sure I'd be able to output/DVI laptop computer.

  Is it possible to connect the laptop to a TV LCD with HDMI? If so, how would that be better achieved? Do I need a series of cables converters?

  Any comments on this would be greatly appreciated.
  Concerning
  Ben milk

  Hello

  As much as I know this laptop can't stand out DVI, or HDMI port.
  It supports only s-video and RGB (monitor) output port.

  My Satellite phone supports a HDMI port output. The external monitor supports DVI and HDMI.
  I connected my laptop via a DVI-HDMI laptop/DVI HDMI cable on my monitor.

  I don't know if there is a RGB to HDMI adapter I doubt m
  But I found another solution;
  You can use a cable S-video to SCART and was able to connect the converter as Lindy - SCART to HDMI between laptop and TV or LCD display.
  This converter is not cheap, but it s about 120Euros