Hot flashes black for a second opening alarm application

Similar Questions

• Since the upgrade to 8.0, when navigation between screens, my computer screen becomes black for 1 second before the screen is redrawn. This happens regularly and is a major nuisance. It simulates a power failure. It does not happen with IE.

  Since the upgrade to 8.0, when navigation between screens, my computer screen becomes black for 1 second before the screen is redrawn. This happens regularly and is a major nuisance. It simulates a power failure. It does not happen with IE.

  Here I answer to my problem: I upgraded my graphics card and the problem seems to have disappeared.

• Satellite C660-1J2 - the screen goes black for a second

  Hey everybody.

  I recently changed my HARD drive and did a reinstall fresh, as previous was damaged. What is happening now is that whenever I have connect or disconnect the cable the screen goes black for a second. There is no real consequence of this, I'd rather just if there was an option to make it happen.

  Then, give a shout someone if you know how to deal with this.

  Hello

  > I have recently changed my HARD drive and did a reinstall of fees
  You have installed Windows from Toshiba normal Microsoft Windows disk or recovery disk?

  To me it sounds like that, you forgot to install the display driver. Also check the Manager of devices for the yellow exclamation points or unknown devices.
  Make sure that correct display driver is installed. You can download the latest version of Toshiba's official website:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Check this box!

• After install flash player for IE in the win10 Application, which contains the webbrowser will crash at startup loading Flash.

  After install flash player for IE in the win10 Application, which contains the webbrowser will crash at startup loading Flash.

  How to solve it? Thanks for any help.

  Hello

  Microsoft has released the patch today to win 10. Please update and try it on FP 20.0.0.272.

  Thank you

• Satellite P300D connected via HDMI to TV - screen becames black for a second

  I have the Satellite P300D.
  But now I have a problem with the P300 HDMI port.

  I have connected to my TV via HDMI.
  The photo is here.
  Every two minutes the black screen for a seconds fue becames, then the picture comes back.
  It is very annoying when I watch a movie.

  Is there a problem with a hdmi cable or with drivers?

  Is it possible to get this working?

  Thanks for any help

  > Is there a problem with a hdmi cable or with drivers?
  Who knows?  :| I think that you will have to test it.

  You could try to reinstall the HDMI Control Manager. This driver is required for your HDMI controller.
  If the question will always be, I recommend that you test different HDMI cables.

• my screen go black for a second or two wy?

  "HP Pavilion p6152f desktop computer
    
  Product number: NP220AA. For a second or 2, my screen go black don't any changes made before the beginning of the problem and any error messages. Hope I chose the good advice for this problem.

  Hi mama23, what kind of graphics card you have? Please try to update to the latest drivers for the graphics card, also check that the power cable and the DVI monitor cable are connected, if you have another cable dvi, I want to pass to be sure it is not the cable, thank you, Adi

• Why my compputer screen will go black for a second on stratup office and when I open the NVIDIA Control Panalpina?

  It does just once after the start, but it do not do again until the next boot. It does start a few seconds after displaying the desktop when all go and whenever I open NVIDIA control Panal.

  I lost the NVIDIA Control Panalpina once I have updated my audio drivers once and I wanted to come back so I uninstalled my NVIDIA GeForce 7800 GT
  display driver. I even downloaded before you uninstall it and put it on the desktop. After uninstalling I went in remaining boot safe and deleted the files and the registry using Driver Sweeper and then booted back to normal startup. I reinstalled the NVIDIA drivers and then I had no internet, so I searched what was wrong and I found that he had removed my Chipset drivers, so I tried one I have downloaded a driver from memory card and it didn't work so I tried another and he got my internet connection to the Local network then turn it on and working.  Now he's doing a short black screen after startup, and he always had the short black screen when I had the front Panal control for NVIDIA. Why does do that?
  I have a NVIDIA Settings program in the taskbar that starts at startup. Could this be why? When I click on it, there is no less than a second before black screen indicating the icon options.

  you said this is because NVIDIA Control Panel to try to detect if there is any exist dual screen or any what extraordinary out - put connected devices.

• Menu background looping stops and black for a second before you begin the movement again

  Help. I don't know that I did it before without a hitch. Yet CS4 I have a video file in a loop as background to the main menu. When it finishes its first loop, it stops, goes black comes back on the first image, suspends momentarily and then starts again. I created a perfect video loop. I thought that this could well be the preview but it did the same thing when I burn on a DVD.

  Any ideas as to why it isn't seamless loop? Any suggestion would be appreciated.

  There's always a break when a motion menu loop, even on DVD of Hollywood.  Generally however, a fixed framework of the last frame of the clip is displayed while the laser seeks at the beginning of the clip.

  Without doubt, I misunderstood the problem initially.  I thought the OP was black during the break.  If the OP is to do a flash of black before the fixed image, maybe there is an extra frame included in the clip at the end of the sequence of Pr.  It is useful to check.

  I recommend some sort of fade out/fade upward for the video of the menu query because the break when a loop is run is impossible to avoid.

  -Jeff

• Using a USB flash drive for backup more driver and application backup recovery

  I have a 32 GB flash drive I used to create a recovery for my Aspire S7 backup using Windows 8.1. I understand that in creating this backup everything on the flash drive is deleted before creating backup. Can I now use this drive for other purposes, e.g., pilots and backup applications, pictures, documents, etc., or this flash drive now should he remain dedicated to the sole purpose of being a backup recovery?

  Hi zimmerbob

  I keep as a backup to dedicated recovery flash drive and use one for drivers & applications.

  It is always wise to keep the recovery discs, as well as the recovery disks. Flash memory is quite inexpensive for the moment!

• Pavilion 15-AK085SN: HP Pavilion AK085SN 15 all minutes of the display flashes (black Flash for a second)

  Hello
  
  All few minutes my computer screen blinks laptop 15-AK085sn Pavilion. It flashes black for a second. It seems to happen much more often when the captain suited is not connected and about every 15 minutes, or when the captain suited is connected.
  
  I thought maybe Windows 10 installed so Linux alongside Windows and the same thing happens in Linux.
  
  Help, please. Thank you.

  Hi there @jjturneruk,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that the screen of your HP Pavilion Notebook - 15-ak085sa flashes.

  Have you connected the laptop to an external monitor or TV? Please try this step first to see if the flashing happens on the external device also.

  You have all connected external USB devices? If so, please remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  Have you tried perform a hard reset?

  Did you do a BIOS reset?

  Have you tried to do a Test hardware?

  Here is a document for you to try. There a few major steps of troubleshooting in it, regardless of whether or not this happened because of Windows 10. It's called blinking or flashing screen after upgrade to Windows 10.

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

  Thank you!

• P2715Q, black flicker for a second, every now and then

  Nice day

  A few months ago I bought the Dell P2715Q, and with some delay, he finally delivered. Well, it appeared the first monitor was broken and had a blue vertical line on the screen. Reference Dell replaced without any trouble, thank you very much for this. However, now with my second P2715Q I got a new problem. Works in 4 k resolution, 3840 x 2160 60 Hz, every now and then the monitor turns black for a second and then it goes back new. It happens randomly, but it seems to happen more often when playing or watching films/series. It happen to rest so so, or only during navigation. It happens sometimes only once in 15 minutes about, sometimes twice or three times in one minute. Oh yes, connected with a cable of DP. So, any idea what could be the problem? Does anyone else have this problem? I'm probably going to soon test the monitor on a friends place, see if my gpu (new) could be causing it, but I doubt it. I had him flickers black on my previous so P2715Q and tested my friends place aswell. There, blacks of ejection happened too.

  The problem has been resolved, it was cable that was the issue. Had a DisplayPort to Clicktronic cable high quality 4K but apparently it wasn't enough good, bought a cable Premium GOLD of Lindy who certified DP1.2 and the problem doesn't happen more.

  It's funny, although considering THAT VESA said in a blog post that it doesn't matter what cable you use, but it is obviously false.

  Also the cable which is included in the box with the monitor at Dell, the DP-> CDM works also, but it is very lose in the connections and the screen lights up and turn it back on as soon as you touch the cable or set the monitor a lack of contact.

• Black screen when going for a second AC adapter / CC is plugged or unplugged.

  Hi all

  I tried to contact the HP support with the issue, but their technicians say that this problem is a problem so here goes from Windows:

  I use PC HP ProBook 4540 s (Energy Star) with Windows 8 x64bit. All of my drivers, BIOS, and compatible HP drivers are updated with the latest versions of the Windows updates. The problem I encounter is that the goes to black for a second or two screen when the power adapter is Plugged-in or unplugged.

  Personally, I think that the problem is related to graphics switchable but don't know how. So far the HP gave me and I tried the following, but to no avail solutions:

  HP has proposed the following

  1. check and see if the problem persists in safe mode

  Result: There is no such a problem in safe mode. Nothing happens when the power adapter is plugged in or unplugged. Screen does not change its brightness or black,

  2. update your BIOS to the latest version

  Result: BIOS is already up-to-date

  3 follow these steps:

  (a) turn off PC

  (b) remove the adapter and any attached external devices

  (c) remove the battery

  (d) press and hold the Power button for 20-30 seconds (this will ensure to remove any residual current)

  (e) turning on the PC using only the AC power

  Result:  Has not made a difference, the problem persists

  Share there is a problem with my laptop, its brand new I bought it last month. I would appreciate a solution and please do not ask me to run to troubleshoot because it has not helped OR nor did reinstall Windows 8 makes all the difference. Thank you

  I just bought this laptop yesterday and I had the same problem as you.   But I think I found the solution.

  What you need to do is 1) go into your power settings, by clicking on the icon of your battery.

  (2) then choose change settings of either "star power balance and energy" or "Energy saving" matter which.

  (3) once you do this, go to "change advanced settings" (must be higher where you adjust the brightness of the screen).

  (4) then go to the left and choose the option that says "Intel HD graphics" and click there and CHANGE the setting to 'maximize the battery' and change to 'optimize performance '.

  It was fixed without 'maximize battery' on mine.

  Once you do this, the problem will be completely solved!

  I hope this helps.

• Screen flashes black when playing games

  When I play the games. The screen flashes black for a few seconds then goes back and re-offend?

  After reading this description of problem a single sentence, it is not easy to tell a lot about your problem.

  Perhaps you should tell us something about your machine, pre-installed OS, display driver you are using and of course, be a bit more detail on this subject.

• My cursor has recently started to disappear when im not using it but when I press a key it flashes back to a second... How can I solve this?

  Well, I'm a frequent user Firefox announcement recently that my cursor began to disappear when I'm not moving it. However when I press a key it flashes back for a second, when I move it sparkles a lot (one moment sound here awhile it isn't). How can I fix it?

  This has happened

  Each time Firefox opened

  Is earlier today (20 July 2010)

  One of your modules could be the culprit. Try running Firefox in questions to troubleshoot Firefox in Safe Mode with all disabled add-ons. If that solves the problem, see Troubleshooting extensions and themes and problems of hardware acceleration to resolve common Firefox problems and possibly troubleshoot issues with plugins like Flash or Java to solve common Firefox problems

• BlackBerry smartphone Email through Bridge suddenly stopped working - flashing black and white screen only

  Used email Bb bridge successfully for about a month since the purchase of the playbook. Then halfway through sending an e-mail response, the screen suddenly started flashing black and white. All bridge applications work perfectly, that e-mail is on BB Curve 9300.

  Tried all the solutions I can find it is similar on the forums, including delete 9300 battery, bridge etc., making the RST, re-installing but no solution.

  It was the main reason that I bought the playbook, so pretty useless.

  Any ideas how to behave?

  After trying all the options for similar problems listed in the forums without success, I finally found the security reset to factory settings PB sort the problem, at the expense of the loss of various data and downloads.

  Fortunately all relatively easy to recover from other sources, just in time.

  I hope this helps if someone else gets the same question.