Menu expands with each mouse click
Hey guys,.
my muse menu grows with each mouse click (open/close) in design mode, this only happens on the new version 2015.2.1
I think it's a bug. It also happens with the Accordion widget. I think they already know about it as well.
Tags: Adobe Muse
Similar Questions
-
each mouse click, I get a sound. I tried everything to turn off this function and rebooting my computer, m ais that nothing works. It is driving my crazy. Maybe I need to reinstall my Windows 7?
I can't cut my sound. Each mouse click, I get a sound. Have you tried everythin, computer rebooted, none works. Help! It's driving me crazy!
Helloa. don't you get the sound when you click in internet explore or anywhere in windows like windows explore etc. ?Follow the ateps below to turn off the clicking sound in Internet Explore.1. click on the Start button in the Windows 7 menu bar.
2. on the start menu, click Control Panel.3. in the Control Panel dialog box, click hardware and sound.
4. on the hardware and the sound dialog box, click change system sounds.
5. in the sound dialog box, use the scroll bar until you see the event entitled: Start Navigation
6 click on Start Navigation7. in the drop-down list select None sounds
8. click on OKThat's all. Your nattering of Internet Explorer (IE) should now be disabled.I hope this helps.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
Captivate 5 Mac: How to get rid of the little star associated with each mouse click
Hello
I recorded a new project and only use the mouse, without noises from klick or select box before you click.
When I look at the saved project, Captivate shows me before each mouse click on a small star, which I don't want to see.
Unfortunately, I can't do a screenshot of it, because it is not visible on the slide at the beginning. It shows the second just before the mouse clicks. I'm sure, I can turn it off, but I don't know where.
Thanks for any help, Miriam
Hello
If you click on the object of the mouse to select and look at the properties panel, is there that something set to display the mouse click?
See you soon... Rick
Useful and practical links
Begin to learn Captivate 5 times now! $29.95
Captivate wish form/Bug report form
-
My XI Acrobat Standard 11.0.09 lost menu bar (F9) and crazy jumps full screen, losing windows buttons high bar, passing just above the menu bar with the mouse cursor, without clicking.
Yes, it's important somehow. Kapersky broke it somehow and fixed. http://Forum.Kaspersky.com/index.php?showtopic=307391&HL=Adobe
-
Problem with 'if - ElseIf' statement with the mouse, click.
I'm having a problem with the code IF ELSE use with a mouse click. I want whenever a user 'clicks' I want to run a particular block of code, up to 3 clicks, then nothing. I tried var meter click local and global but can't seem to cross the first '' if. '' That's what I have now (I use console.log () to keep track.
Ready model I create a global var...
Enter the code to run when the composition is fully charged here
sym.getComposition () .getStage () .setVariable ('clickcnt', 1); //Set 1 metervar i = sym.getComposition () .getStage () .getVariable ('clickcnt');
Console.log ("count starts at"+ i ");
on the stage, I create an event 'click '...
Insert the code for the mouse, click here
var i = (sym.getComposition () .getStage () .getVariable ('clickcnt');)
If (i = 1) {}
Console.log ("counter is =" + i);
c code
sym.getComposition () .getStage () .setVariable ('clickcnt', 2); //Set against 2
}
ElseIf (i = 2) {}
Console.log ("counter is =" + i);
c code
sym.getComposition () .getStage () .setVariable ('clickcnt', 3); //Set against 3
}
ElseIf (i = 3) {}
Console.log ("counter is =" + i);
c code
sym.getComposition () .getStage () .setVariable ('clickcnt', 4); //Set against 4 to take away
SYM. Play (100); //play scenario animation
}
else { //I'm using it to deny any additional clicks.} I don't know there is a good way to do this. I don't know him
SYM. Stop (1000);
Console.log ("End");
}
;I when I run this it never happened the first if it's like the 'clickcnt' var is not getting updated or read correctly.
Thank you
Joel H
try if (I == 1) double equal.
-
Intercept each mouse click event in application
Hello
I would like the world catch each mouse click event in my Flex application. Also, I would like to get the ID of the element (checkbox, button, etc.)? Items in my application are static, but there are many. Then writing functions for all elements is not an option. Is it possible to catch each click event?
Thnx in advance
Hello
It is very easy.
Add the click event handler for Application Manager and you will get all the events so they don't collapse (using event.stopPropagation ())
-
Drawing line with the mouse clicks on picture indicator
Hello
I need to import a JPG file in an image control, draw a line in 2 clicks, read bothe XY positions and perform some basic trigonometry. Any simple or striaghtforward way to draw the line with the mouse and read thos passay on the bitmap (positions relative pixel)?
Thanks in advance,
-
Contact information for return pixel Imaq image with the mouse click event
Hello
I'm trying to get the coordinates in pixels of an image Imaq based on a mouse click event, similar to this post and this post. The problem is that with the first post, I get the coordinates in the image control and hesitate to trust them, they seem to have the Center origin, may return negative coordinates and do not represent the actual size of the detector that I use (512 x 512). It also returns the coordinates outside the actual data when it is clicked on the image control framework. The second method returns simply null coordinates. What I want are the coordinates of the pixel displayed when hovering the mouse imaq image control framework.
What baffles me, is that I tried the second method with a png stock file and it works fine, it is only when I create an image from the data of my camera than the coordinates are returned null. Note data views of camera under control of image very well.
Any ideas would be useful. Enclosed is a picture of the offending code and the Panel before displaying the camera data is coming (I know it needs some cleaning).
Thank you
Tyler
for help, please send your vi
but I think that this example vi is your solution
check this vi
-
InDesign objects are not locked and will not move with the mouse click.
I rebooted, uninstalled and reinstalled. Objects interact with when the mouse is clicked. The contours of the block came and the object can be selected and changed, however it will not move with a mouse. Objects respond to the arrows when the issue is raised; but it's heavy at best.
I gave in my computer image. What was the origin of the problem, is now gone. Thanks for your help.
-
Spry menu bar change the mouse click
Hello...
I've created a Spry menu bar, and it works fine. But on phones and tablets the submenu does not work because it's a passage from the mouse, is it possible to change a mouse click?
Thank you!
I found this one and it's great for what I want
-
Howdy, all.
I develop a form by using the API of the RIM, and for some reason, whenever I click outside of a field in the storm, a submenu appears with several choices (show the keyboard, exit, etc.). It's embarrassing. It also happens when I push a new screen in the stack. How can I avoid this?
Here is an example of code, but I think it's more a question of a general nature.
VerticalFieldManager vfm = new VerticalFieldManager(Field.FIELD_VCENTER); vfm.setPadding(20, 20, 20, 20); // Continue Button ButtonField exit = new ButtonField("Agree and Continue", Field.FIELD_HCENTER); FieldChangeListener exitListener = new FieldChangeListener() { public void fieldChanged(Field field, int context) { UiApplication.getUiApplication().pushScreen(Screens.sCallButtons); } }; exit.setChangeListener(exitListener); exit.setMargin(20, 0, 0, 0); vfm.add(exit);
To be clear, replace the line with this:
ButtonField exit = new ButtonField("Agree and Continue", Field.FIELD_HCENTER | ButtonField.CONSUME_CLICK);
-
Hello!
I recently acquired an Officejet Pro 8600 and immediately connected to my network wireless as stated in the manual. No other type of connection has been used beforehand and the operating system is Windows 7 64 bit.
After that the installation of the printer driver appears twice each time that a program asks me to select a printer from the drop of the printing devices in the typical menu of preparation of printing.
There is an entry for "Officejet Pro 8600 (network)" and something in the sense of 'HP95CDN' (Officejet Pro 8600). I can't remember the exact names off the top of my head, but it is the name of the printer with the 'network' in brackets in one case and a kind of shortcut ID printer with full name in parentheses in the other case.
According to the program, one of the options gives the desired impression while the other simply causes a queue of indelible impression for the name of the unit in question that is stuck to a few KB of data transmission.
Usually printing works with the device with the identification of the printer in its name, but I recently had a case where with LibreOffice printing only works with the other choice.
Can someone explain to me exactly means?
See you soon,.
Pete
Direct entry Wireless will be visible under menu so direct wireless is on... However, since you are able to print another icon (not the network icon) I assume direct wireless is off coz you will not be able to print from wireless directly on the printer if you are connected to the router.
I believe that the icon of the printer (not the network icon) has a port WSD assigned and is automatically detected by the operating system and installed.
Go to service window and check if you have any input that says function Discovery Provider Host and see if it is started. Try to stop the service, and remove the icon of the printer (not the network icon) in the print server properties.
Restart the PC and check if the icon comes back or try to uninstall and reinstall
Let us know the result -
Windows operating system gets stuck on each mouse click.
I own a hp pavilion dv6-7039tx computer laptop wid 1 TB hdd, 8 GB ram, 2 GB gpu.
Ive used it for about 6 months.i installed edition ultimate to win7. its been working great...recently I lived a few problems while watching videos, playing games, etc.
now my phone is blocked for just 2 seconds n each clik.
I use an original antivirus and am sure no virus problem.
later, I formatted the laptop for win 8 pro.
now the same problem persists here too... on each clik, I mean I guess just clik, then the system becomes non-responsive for multiplexer 2 then proceeds... This is the case with every click. I'm fed up wid this problem... well kindly help me to solve the problem... someone.Don't do not format the drive. Formatting the drive will erase your data.
There is another option that I used myself until I find it quite easy. It allows you to access the failed hard disk much like you acceding to a flash/USB and remove data.
- Put the hard drive failing in the computer where it was originally
- Burning a Live CD with a second computer (there are several types of Live CD there. Knoppix is my favorite. Here is a link with lots of information about Knoppix and how to use it. Best part is it's free!)
- Place the Knoppix disc in the original computer
- Connect an external hard drive to the original computer
- Turn on the computer
- Change the start option on your CD/DVD drive (by pressing F9 to the power of)
- Start under Knoppix and use it to access your hard drive failed as a USB and copy and paste the files on the external hard drive
Given that Knoppix does not install on your hard drive and must be read on a disc, it will be much slower because the speed of the optical drive access is slower than the speed access to internal hard drive. So please be patient while it starts up and even if it is copy and paste files from your old hard drive to the outside.
In addition, as a warning, you may not be able to remove 100% of your files, because there may be physical problems with the hard drive, thus preventing the reading of certain areas. Each case is different. However, I can say that I was able to recover about 95% of the data from a hard drive in a computer that had been abandoned about 3 ft, using Knoppix.
If you have any questions at all about it please let me know. In my view, it is the most stable and reliable way to transfer files in a situation like this. Let me know if it helps!
-
Final Cut 10.2.3 spinning wheel to each mouse click
10.2.3 editing does more (spinning wheel) whenever I click on a clip, timeline, etc. I'm Mac OS 10.11.3 on the MacPro (mid-2012). In the latest copy of the days, he has been making more slowly from day to day. Spinning for a few seconds, then I could continue, but now never move results in the spinning wheel. I'm not sue if the problem resulted, after upgrading, the operating system or Final Cut as the two that happened recently.
you have already tried some of these tips, but it is good to see if there is any more, you can try:
Final Cut Pro x: basic troubleshooting
-
Default with the mouse, click on?
Hi guys,.
I'm fairly new to LabVIEW, and indeed this forum, so I hope you can help. I guess this is a simple problem, but I can't understand how do.
I have a cRIO taking 4 analog voltages. Each voltage comes from a linear potentiometer which is the displacment of suspension on a formula student race car.
I have a simple formula set up to convert the voltage to displacment. I created a table of entries that allows me to the maximum, minimum, value (from the previous probe calibration) and "stationary" value of each sensor.
The "stationary" value, is what the sensor should be read when the car is stopped. This is then used as the basis for positive or negative displacments.
My problem is that whenever a different driver gets in the car, the susspension is adjusted or fuel is added, the "stationary" value will be different. I then have to manually define the stationary value to whatever the current value is when the car is stopped, press "default current worth" and save the VI before continuing.
What I would like to, is a "calibrate" button that I can support on that sets the "stationary" regardless of the current input voltage is. In this way, I wouldn't reset the 4 values each time the car has been modified.
If you have any ideas on how to do this, please let me know.
I will attach my VI as soon as I return to the laptop where it is saved!
Thank you
Kevin Irving
Kevin,
As you have discovered, you cannot change the default values on a VI running.
The best way to do what you want is to use a configuration file. There are a set of screws specifically designed for this purpose in the palette file IO. When the user presses the button "calibrate", the values are stored in the file. When the program starts, it reads the file and sets controls on the values in the file. You can even keep different for each driver sets, if the data are fairly consistent.
Read the help detailed for the screw configuration files and look at the examples. It will show you how to get started.
Lynn
Maybe you are looking for
-
I installed 4 Fox under Windows (7), on a PC. My top toolbar goes like this. Upper line: file, edit, etc.. Second line: open tabs. Third line: normal search and address bar. Fourth line: favorite icons. Fifth line: Google toolbar. I can see my DESKTO
-
An error of virus gadcom.exe/wininstall satellite series
Hey I was wondering if someone could help me with my problem of virus/malware. Well earlier in the day I looked around on the internet then it said I had a virus (AVG) and I clicked on "move to the Vault" then it says path not specified not and I tho
-
My Thunderbolt screens have the possibility to be connected in Garland and get their signal on a single cable Thunderbolt, an iMac in target Display Mode should not also have this capability? Is an iMac in target Display Mode capable of simulating a
-
I've been reading and research on the Microsoft forums and support sites, and nobody has provided definitive guidance on how to upgrade XP Home to XP Pro on-site (both editions are SP-3). I have too setups/configurations and software to deal with the
-
Help please with Photoshop CS2
HelloI just got a new laptop and I try to install Photoshop CS2. I love this version. I installed it and I can not open.The file is there, but it used to open. Can someone help me?Thank you.