With each mouse click sound

Similar Questions

• Menu expands with each mouse click

  Hey guys,.

  my muse menu grows with each mouse click (open/close) in design mode, this only happens on the new version 2015.2.1

  

  I think it's a bug. It also happens with the Accordion widget. I think they already know about it as well.

• Captivate 5 Mac: How to get rid of the little star associated with each mouse click

  Hello

  I recorded a new project and only use the mouse, without noises from klick or select box before you click.

  When I look at the saved project, Captivate shows me before each mouse click on a small star, which I don't want to see.

  Unfortunately, I can't do a screenshot of it, because it is not visible on the slide at the beginning. It shows the second just before the mouse clicks. I'm sure, I can turn it off, but I don't know where.

  Thanks for any help, Miriam

  Hello

  If you click on the object of the mouse to select and look at the properties panel, is there that something set to display the mouse click?

  

  See you soon... Rick

  Useful and practical links Begin to learn Captivate 5 times now! $29.95 Captivate wish form/Bug report form Certified Adobe Captivate training SorcererStone blog Captivate eBooks

• Problem with 'if - ElseIf' statement with the mouse, click.

  I'm having a problem with the code IF ELSE use with a mouse click. I want whenever a user 'clicks' I want to run a particular block of code, up to 3 clicks, then nothing. I tried var meter click local and global but can't seem to cross the first '' if. '' That's what I have now (I use console.log () to keep track.

  Ready model I create a global var...

  Enter the code to run when the composition is fully charged here
  sym.getComposition () .getStage () .setVariable ('clickcnt', 1); //Set 1 meter
  

  var i = sym.getComposition () .getStage () .getVariable ('clickcnt');

  Console.log ("count starts at"+ i ");

  
  

  on the stage, I create an event 'click '...

  Insert the code for the mouse, click here
  var i = (sym.getComposition () .getStage () .getVariable ('clickcnt');)
  If (i = 1) {}
  Console.log ("counter is =" + i);
  c code
  sym.getComposition () .getStage () .setVariable ('clickcnt', 2); //Set against 2
  }
  ElseIf (i = 2) {}
  Console.log ("counter is =" + i);
  c code
  sym.getComposition () .getStage () .setVariable ('clickcnt', 3); //Set against 3
  }
  ElseIf (i = 3) {}
  Console.log ("counter is =" + i);
  c code
  sym.getComposition () .getStage () .setVariable ('clickcnt', 4); //Set against 4 to take away
  SYM. Play (100); //play scenario animation
  }
  else { //I'm using it to deny any additional clicks.} I don't know there is a good way to do this. I don't know him
  SYM. Stop (1000);
  Console.log ("End");
  }
  ;

  I when I run this it never happened the first if it's like the 'clickcnt' var is not getting updated or read correctly.

  Thank you

  Joel H

  try if (I == 1) double equal.

• Intercept each mouse click event in application

  Hello

  I would like the world catch each mouse click event in my Flex application. Also, I would like to get the ID of the element (checkbox, button, etc.)? Items in my application are static, but there are many. Then writing functions for all elements is not an option. Is it possible to catch each click event?

  Thnx in advance

  Hello

  It is very easy.

  Add the click event handler for Application Manager and you will get all the events so they don't collapse (using event.stopPropagation ())

• Drawing line with the mouse clicks on picture indicator

  Hello

  I need to import a JPG file in an image control, draw a line in 2 clicks, read bothe XY positions and perform some basic trigonometry. Any simple or striaghtforward way to draw the line with the mouse and read thos passay on the bitmap (positions relative pixel)?

  Thanks in advance,

  
  

• Contact information for return pixel Imaq image with the mouse click event

  Hello

  I'm trying to get the coordinates in pixels of an image Imaq based on a mouse click event, similar to this post and this post. The problem is that with the first post, I get the coordinates in the image control and hesitate to trust them, they seem to have the Center origin, may return negative coordinates and do not represent the actual size of the detector that I use (512 x 512). It also returns the coordinates outside the actual data when it is clicked on the image control framework. The second method returns simply null coordinates. What I want are the coordinates of the pixel displayed when hovering the mouse imaq image control framework.

  What baffles me, is that I tried the second method with a png stock file and it works fine, it is only when I create an image from the data of my camera than the coordinates are returned null. Note data views of camera under control of image very well.

  Any ideas would be useful. Enclosed is a picture of the offending code and the Panel before displaying the camera data is coming (I know it needs some cleaning).

  Thank you

  Tyler

  for help, please send your vi

  but I think that this example vi is your solution

  check this vi

• InDesign objects are not locked and will not move with the mouse click.

  I rebooted, uninstalled and reinstalled. Objects interact with when the mouse is clicked. The contours of the block came and the object can be selected and changed, however it will not move with a mouse. Objects respond to the arrows when the issue is raised; but it's heavy at best.

  I gave in my computer image. What was the origin of the problem, is now gone. Thanks for your help.

• Windows operating system gets stuck on each mouse click.

  I own a hp pavilion dv6-7039tx computer laptop wid 1 TB hdd, 8 GB ram, 2 GB gpu.
  Ive used it for about 6 months.i installed edition ultimate to win7. its been working great...

  recently I lived a few problems while watching videos, playing games, etc.
  now my phone is blocked for just 2 seconds n each clik.
  I use an original antivirus and am sure no virus problem.
  later, I formatted the laptop for win 8 pro.
  now the same problem persists here too... on each clik, I mean I guess just clik, then the system becomes non-responsive for multiplexer 2 then proceeds... This is the case with every click. I'm fed up wid this problem... well kindly help me to solve the problem... someone.

  Don't do not format the drive. Formatting the drive will erase your data.

  There is another option that I used myself until I find it quite easy. It allows you to access the failed hard disk much like you acceding to a flash/USB and remove data.

  1. Put the hard drive failing in the computer where it was originally
  2. Burning a Live CD with a second computer (there are several types of Live CD there. Knoppix is my favorite. Here is a link with lots of information about Knoppix and how to use it. Best part is it's free!)
  3. Place the Knoppix disc in the original computer
  4. Connect an external hard drive to the original computer
  5. Turn on the computer
  6. Change the start option on your CD/DVD drive (by pressing F9 to the power of)
  7. Start under Knoppix and use it to access your hard drive failed as a USB and copy and paste the files on the external hard drive

  Given that Knoppix does not install on your hard drive and must be read on a disc, it will be much slower because the speed of the optical drive access is slower than the speed access to internal hard drive. So please be patient while it starts up and even if it is copy and paste files from your old hard drive to the outside.

  In addition, as a warning, you may not be able to remove 100% of your files, because there may be physical problems with the hard drive, thus preventing the reading of certain areas. Each case is different. However, I can say that I was able to recover about 95% of the data from a hard drive in a computer that had been abandoned about 3 ft, using Knoppix.

  If you have any questions at all about it please let me know. In my view, it is the most stable and reliable way to transfer files in a situation like this. Let me know if it helps!

• Final Cut 10.2.3 spinning wheel to each mouse click

  10.2.3 editing does more (spinning wheel) whenever I click on a clip, timeline, etc.  I'm Mac OS 10.11.3 on the MacPro (mid-2012).  In the latest copy of the days, he has been making more slowly from day to day.  Spinning for a few seconds, then I could continue, but now never move results in the spinning wheel.  I'm not sue if the problem resulted, after upgrading, the operating system or Final Cut as the two that happened recently.

  you have already tried some of these tips, but it is good to see if there is any more, you can try:

  Final Cut Pro x: basic troubleshooting

  https://support.Apple.com/HT203477

• Default with the mouse, click on?

  Hi guys,.

  I'm fairly new to LabVIEW, and indeed this forum, so I hope you can help. I guess this is a simple problem, but I can't understand how do.

  I have a cRIO taking 4 analog voltages. Each voltage comes from a linear potentiometer which is the displacment of suspension on a formula student race car.

  I have a simple formula set up to convert the voltage to displacment. I created a table of entries that allows me to the maximum, minimum, value (from the previous probe calibration) and "stationary" value of each sensor.

  The "stationary" value, is what the sensor should be read when the car is stopped. This is then used as the basis for positive or negative displacments.

  My problem is that whenever a different driver gets in the car, the susspension is adjusted or fuel is added, the "stationary" value will be different. I then have to manually define the stationary value to whatever the current value is when the car is stopped, press "default current worth" and save the VI before continuing.

  What I would like to, is a "calibrate" button that I can support on that sets the "stationary" regardless of the current input voltage is. In this way, I wouldn't reset the 4 values each time the car has been modified.

  If you have any ideas on how to do this, please let me know.

  I will attach my VI as soon as I return to the laptop where it is saved!

  Thank you

  Kevin Irving

  Kevin,

  As you have discovered, you cannot change the default values on a VI running.

  The best way to do what you want is to use a configuration file.  There are a set of screws specifically designed for this purpose in the palette file IO.  When the user presses the button "calibrate", the values are stored in the file. When the program starts, it reads the file and sets controls on the values in the file.  You can even keep different for each driver sets, if the data are fairly consistent.

  Read the help detailed for the screw configuration files and look at the examples.  It will show you how to get started.

  Lynn

• Dynamically place video clip on the corner and the overall position with a mouse click (button) that is always running.

  Anyone know the code to find the global positioning of the coordinates X and Y of a click of a button which turns constantly,
  then the code when you click the button, it displays a clip on the top-(position de x et y lorsque vous cliquez dessus) to the angle that you clicked (so the buttons are always rotating so others can click on them where they are)

  to explain the context, I am designing a model to the top of an interactive round table
  When someone approaches her and click on one of the buttons that move, it reads where the person has clicked on it and open a new box (video clip) where they have clicked on it (on the corner) so is not backwards if you're upstairs.

  I have included my .fla file that shows the four navigation buttons and a small diagram
  explain what I'm trying to do.

  you don't have a class named MethodAnimalMC.

• How continually increment while the mouse click now

  The attached VI increments a number to each mouse click.  Is it possible to increment permanently with the structure of the event and now the click of the mouse?  For example, if I want to increment the counter from 1 to 100, I don't want to have to click the mouse 100 times, I just want to click once and hold.

  Here's a slightly simplified version which removes some code duplication.

  (Note that both Tim and I have placed before the structure of the event mark.) This eliminates the need for the reset operation).

• How can I create a field that allows you to change by a mouse click?

  THE field is blank, click first between "/", then click on entry changes to 'X' and third click changes in an empty field.  Bascially I want a field that allows to use to scroll with the mouse click.

  It is possible. What you describe can be considered a multistate checkbox. The following demo illustrates a number of different implementations: https://acrobat.com/#d=xRrSL3NBQy2hu5qFANPvqA

  You will have to study the code in different areas (box/text for the button combinations) and at the level of the document to understand how it works.

• How can I remove mouse clicks

  Hi all.

  How can I delete my demo mouse clicks before you publish?

  Hope you can help. Thank you.

  Tim.

  Hi Tim.

  Mouse click sounds can be removed by following the steps:

  1. open the mouse properties dialog box by double-clicking the mouse , present object on your slide.

  2 uncheck the nattering of the mouse checkbox.

  3. check the apply to all checkbox.

  4. Select ' apply to all' and ' apply only changed properties' options in the parameters of drop-.

  5. click on OK.

  6. now publish the project.

  Mouse clicks will not appear in the published movie.

  Thank you.

  Michel.