Menu HomeKit lack of parameters
I try to get my tint to work via Siri Philips lights, or the HomeKit app when I'm not on my wifi network. I found a few reference documents which shows I need to allow remote access through the HomeKit section in my settings app, but it's not here.
Any guidance or advice are appreciated.
I feel the same way. My Apple TV is connected to the host-app (under 'home Hubs'), but my lights do not react. The only entry in settings is privacy > HomeKit.
Tomorrow the final version to see if it is just missing.
Tags: iPhone
Similar Questions
-
Portfolio &; Apple pay lack of parameters
Just noticed that I couldn't use my credit car. removed to add it again, but could not. Began to scroll to the top and he don parameters without finding the icon Wallet & Apple pay, he is gone.
Why? and how do I get that back.
My wallet with all other cards application is still on my phone.
Hello
Apple pay is available in some countries - including the United Kingdom.
Unless your area of iPhone is set to one of these regions, you will not see the possibility to add cards to pay Apple.
- Go to: settings > general > language and region > region.
It is also possible to add payment cards supported of the participating banks or stores within these countries.
More information:
Apple pays the participating banks in Europe - Apple Support
Set up Apple pay on your iPhone, iPad, or Apple Watch - Apple Support
-
Menu options lack analytical Photosmart C5180
My menu scan shows only two options 1. Scan and reprint, 2. Scan to memory card. The scan to a file or an e-mail message options disappeared. How can I fix this?
Hi Delray,
Since you do not see the option "Scan to computer" after pressing the scan button, it is simply related to the 'no. Scan Options '.
(1) you are able to scan from the HP Solution Center?
(2) try the HP scan Diagnostic Utility
(3) also check this DOCUMENT that relates to this error on the printer condition.
-
Menu of lack of blackBerry Smartphones
I have a BlackBerry Curve 8330 m via US Cellular. When I go to "messages" and press the menu button, the menu does not come to the top. When I select a message and click the trackball it does not open the email. Can someone help me?
Welcome to the dalingers2000 forums
If your phone is upward, the first thing to try is a battery continuously:
1. remove the battery while the phone is turned on
2. wait a few seconds before inserting it again
3. wait for the long end of the boot process (takes a few minutes usually)This clears most of the software problems that occur on the BlackBerry from time to time. You can also use Quickpull, a free application that simulates a battery pull without removing the battery: http://software.crackberry.com/product.asp?id=27660
A battery pull gets lost when using the applications memory and clears minor software errors that creep over time. The blackberry is running an operating system just like your PC is running windows and battery pull is the equivalent of a reboot / restart your computer. -
Option to check the updates for other products (office) MS lack of parameters
I asked about this in another thread (Windows Update crashes), but I want to start a new position of thought better. This problem is, I am sure, associated to the 12 April patch Tuesday update problems. In fact, I think that it was caused by something one of the technicians of MS has done in their attempt of pitiful to fix the mess created by MS. Before all this happened, I had to "give updates me for other Microsoft products when I update Windows" selected and was able to receive. After one of the technicians fooled with my computer, I noticed that this option is more obvious.
To solve the problem of being able to check the updates of Windows, I installed KB3145739, as suggested in the above thread. That fixed the problem with the verification of these updates, but I can't find a solution to check the Office updates. This option is just gone. I tried the obvious fixes, but nothing works.
I hope that someone might know what I can do as possible because the call from Microsoft is an absolute waste of time. They don't know what they are doing, nor do they even try to help. After just two hours of my life to keep with their magnificent support, I'm absolutely no help. It was as if I was talking to the air. Two different people could just not understand what I was talking about, any clarity, I explained. I'm so disgusted with Microsoft anymore - they don't really care about all the people who use their products. If anyone knows how I could check once more for the Office updates without having to uninstall and reinstall Office (don't even know if it would help)? Thank you.
I just wanted to update. I finally found a solution and now have the opportunity to return to check the Office updates. I put the solution that I found in the thread (Windows Update crashes) when I initially asked on this subject.
-
I uninstalled reinstalled through the cloud app CS6 (joined in cloud)... downloaded InDesign installed without error, but miss me windows and menu items and its driving me crazy... I have to reinstall again?
lack of race, but it can get the weight by the context menu
lack of the object text box menu item (forget not that its actually caused)
little things like that
Help, please
A lot of other things to check again.
Edit > Menus... and check to see if the missing items are listed, and if they are, are they turned on?
Try to reset the current workspace and try a different workspace and see if that makes a difference.
Create a new user account and sign in with that. The stuff is still missing?
-
Link to shift + click on the Google search result
How can I open new tab/windows by link shift + click on the Google search results?
It is the way in which Firefox opens the link.
My current setting is Ctrl + click opens a new tab in a new background tab, shift + click opens the link on the same page.
Firefox 40.0.3 Windows XP
For the Google site, you can set preferences on the Google page via the top gear icon to the right of the results, click this button to open the list of menu and select search parameters.
Where results open: Open search results in a new browser window.
Google settings are stored in a PREF cookie on your computer, you must create an exception to allow him to keep cookies for Google to save settings, otherwise you will have to repeat.
-
Opening of new tab by clicking on the link
Out of the blue, firefox suddenly began to open links from Google and Yahoo search engines in a new tab instead of going directly from the original tab. I tried to type the control and shift keys, restart firefox, then by restarting the computer (to check). nothing works. Oddly enough, it was only these two having this problem, so I wonder if they have updated their own settings to force it.
Have you checked the settings on the Google preferences page?
For the Google site you can set your preferences on the Google.com page through the gear icon in the upper right.
Click this button to open the list of menu and select search parameters.Results window: the search results open in a new browser window.
Start Firefox in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).
- Makes no changes on the start safe mode window.
- https://support.Mozilla.org/KB/safe+mode
-
Second installed hard drive is not seen by BIOS
I have a computer "AMD A8 - 5500 3.2 GHz APU" - A8 Vision HP Pavilion
BIOS v.7.10
I installed a second SATA drive (a 3 to Seagate) and booted up the factory installed OS on the first SATA hard drive. The operating system has no problem see the car, so I installed a second operating system on a 700 GB partition on the second disk SATA. However, when I booted the system to complete the installation of the operating system, the BIOS could not see the second SATA drive. Start on the operating system on the first SATA hard drive, no problem, the operating system can see the second SATA drive. So, the problem occurs during startup. The BIOS will not see the second SATA drive.
However, if I interrupt the BIOS at startup and go make a diagnosis (and I cancel that and not run the Diagnostics), all of a sudden, the BIOS can see the 2nd SATA drive and I can boot on it. Interrupt the normal BIOS boot and enter the setup of BIOS and then canceling, will be 100% of the time cause the BIOS to see the second SATA drive. If I do not do this, the BIOS did not see the other disk SATA 100% of the time. It is a real nuisance.
I looked for a BIOS update version (assuming that it was a a bug is identified with a newer version of the BIOS), but can't seem to find anything.
Does anyone know how to fix this?
Thank you
SFMChris
I don't think that it has nothing to do with the "Windows Boot Loader (Winload.exe or is)". However, I try and run a ' bcdedit/set {GUID} path \windows\system32\winload.exe"produces a non-Boot OS (even if I tried to use my current solution by interrupting the BIOS at startup).
This is the current behavior that I see when I hit ESC to get into the BIOS setup (you have a window of less than 2 seconds to hit this key before the WIndows boot loader menu appears). The paths to the settings in the BIOS menu, followed by the parameters that I see are:
* Start menu
-Shows only SATA0
* Computer Configuration > storage > Configuration of the device
-Shows only SATA0
* Computer Configuration > storage > boot order > Legacy Boot Sources
-Shows only SATA0
* Computer Configuration > storage > DPS self test
-Displays SATA0 and SATA1?
UPDATE:
I just found the fix (HP devs should fix this bug so).
SOLUTION:
I did change the following BIOS:
* Computer Configuration > storage > advanced > Power Options
-POST time (in seconds) 5
Parameters of a POSITION to delay (from the default of almost no delay at 5 seconds) solves the problem. In fact, if I wait 3-4 seconds late and then press the ESC key to enter the BIOS setup, everywhere I saw "Shows only SATA0" above before, is now showing SATA0 and SATA1. Everything is looking and working as I expect to. problem solved.
Thanks to everyone who tried to help him.
SFMChris
-
XPRT: Adding a new contact add contact to ALL my accounts
I just changed the XPRT so I hope that this issue is something that I just do bad. When I add a new contact on the phone, the contact is added to all my accounts (in this case 7 accounts), and each of them appears as a contact with 7 links. I don't see a place to specify the account to add contact when I'm creating, or when I try to change it.
What I'm missing here? Is there a way to specify the account to add the contact to?
Thanks in advance for your help.
-Alex
Welcome.
I think that what you are looking for and im do not know because I only have my google
account for the contact is:
If you go to your contacts, press menu, select, then
Parameters. I think that you can choose which accounts get link and which are not.
Thank you
J
Sent from my Motorola XPRT
-
Samsung SCX 4200 printer spooler service is not running"error; any attempt to add a local printer
For example, the print spooler runs?
Type Services.msc in the box run from the start menu and check the parameters print spooler, set it to auto start.
John
-
Which applications are safe to remove and which are not?
I have recently rooted my Xperia U on ICS and have removed a lot of things more obvious as EA Games, office, etc, but I was wondering who the rest are safe to remove or freeze.
Here is the list of what I have left after initial cleaning:
Android system (this, along with a few others I've listed, I'm sure that are important )
Usage statistics for Annoymous
Application settings
To THE Service
AudioEffectService
AutopoweroffService
Backup and restore
Bluetooth sharing
CDinfo accessor Service
Installation of the certificate program
com Android.Providers.Partner.Bookmarks
com.sonyericsson.AppShare
com.sonyericsson.illumination.service
com.sonyericsson.MTP.extension.backuprestore
com.sonyericsson.MTP.extension.Marlin
com.sonyericsson.Provider.voipcalling
com.sonyericsson.startupflagservice
CrashMonitor
CredentialManagerService
CustomizationProvider
Custom application installer
Custom settings
DeviceMonitor
DlnaHandoverAdapter
Download Manager
DownloadAgent
DRM protected content storage
DrmDialogs
Event data flow engine
Exchange services
GenericAppInstaller
Backup transport Google
Google time Init
Google partner introduction
Gaming Google services
Google Services Framework
HTML Viewer
InitialBootSetup
Key ring
Learning Client 2.1
Lock screen
Agent of market report
Storage media
Movies
PSG extension service
MusicFX
My Uploads
Network location
New software Checker
OMA Client Provisioning
OMA Download Client
OmaV1AgentDownloadServices
Overheating control
Access Helper package
Installer package
Pico TTS
ProtectedMediaScanner
ProtectedMediaScannerTrigger
R2R customer
Remote control service
Provider of search Applications
SecureClockService
SEMC accelerated transport
SEMC service
SEMC UsbStorage Transport
SEMC-cnap-provider
Maintenance menu
Storage of parameters
Stop animation
Contact SIM
Detection of the SIM card
Smart search
SNP utility platform
SocialEngine
Sound improvements
Sound level alert
Audio selector
Storage capacity
SwiqiMasterReset
SystemUI
Verification of the right to home
Helmet unsupported notifier
Update Service
USB connectivity
usbotg
UserAgentProvider
VerifyCertificatesDummyApp
VerifyCertificatesDummyApp
VerifyCertificatesDummyApp
VerifyCertificatesDummyApp (Yes, there are four of them. Applications, media and shared platform)
VpnDialogs
Customization of WAPI
WapPush
WarrantytimeService
Any help is very appreciated.
Here you go
http://Forum.xda-developers.com/showthread.php?t=1874803
Don't forget to mark the correct answers & useful answers
Another issue, if you have time please check this thread
-
X 1 connection of carbon fingerprint reader problem
I have 4 new (3444-2GU) carbons that I place with senior level executives. I placed an already and fingerprint software will not allow a logon of domain. I get an error message "the system logon is disabled for users in the domain. That this computer is connected to a domain, you won't be able to log on by using the fingerprints until you enable it in the biometric devices Control Panel. »
I have ThinkVantage PS version of the 5.9.7.7226 software installed and the biometric devices control panel run the TV public Service software. All the boxes on the tab authentication parameters are controlled under the section of Windows authentication. Successfully, I can start the laptop by a touch of finger with the active password power on and authenticate in the FP software by a touch of finger.
The FP TouchChip coprocessor driver is version 1.5.0.328 from AuthenTec. Fingerprint AuthenTec 5.9.7.7261 patch is also installed. I deleted all the drivers and software and reinstalled through TVSU and it still does the same thing.
I'm not able to find the magic switch for that to work, so I don't have to explain what that this weird button in search of thing that does not work. Anyone has any ideas on this?
Thank you.
In the start menu, type "Edit biometric parameters..."
-
Passport for blackBerry update 10.3.1.2267/1581 - change of speed dial
With the last update the location and configuration of the speed dials were changed and more wrote the previous settings. There are no shortcuts 17 application that are of low value because of the ease of the menu system, but takes parameters useful for speed phone dials that allow someone to be compatible with the laws of conduct.
My questions:
(1) can go back us to the previous settings (set speed dials)?
(2) otherwise how can overwrite us parameters as it doesn't seem to be a way to edit application shortcuts.
Love my passport!
Not happy about this.
Figured out how to change the new speed dials.
Press on the one you want to change. While you're holding down, the Edit option is displayed on the right side of the screen. Keep now and select the button change. You then get a menu to reassign the button!
Is not intuitive but it works.
Still in love with my passport!
-
Hi all, I need to put a trunk between two SRW2048 connected via a fiber link, in order to leave a vlan to share between them. My configuration is: switch A: - default untagged VLAN 1 - 10 of VLAN ID custom, named "wifi" - port 47-online fiber, defined as 'trunk', the two Vlan 1 and 10 are joined with the trunk - port 11: I want that he the VLAN 10, in order to see the 11 switch switch B: - by default without tag VLAN 1 - port custom VLAN ID 10 named "wifi" - port 48-online fiber, defined as 'trunk', the two Vlan 1 and 10 are joined with the trunk - port 11: I want the VLAN 10, to see the way 11 switch has tried to set the two port 11 mode "general", tag, joined only in VLAN 10, but I could not bind on the optical fiber. I tried many configurations for the two port 11, but they does not work. I think the 48 and 47 of fiber ports configurations are ok. I hope you can help me thank you Alessandro Note:-yesterday I updated both firmwares to 1.2.2d; After that, I have an error in recording 'VLAN of Ports' setting on both switches. I check all the parameters. They seems ok, but this page (and only this) gives this error: line = 1 Type = unknown value = null value error diagnosis = may be lack of parameters (join1) in the page. -I turned the 'enable 802. 1 x' flag on 'Security' => "' 802.1 x Settings"-I'm not using GVRP; " When I join the port to VLAN it gives me an error 'web' on Internet Explorer version 6 and 8, and I'm not able to reach the ports of vlan. On the other hand, I see the VLAN custom between switches only if I attach somethings to 11 ports (I use a dhcp server on one port and dhcp on another client).
Only, I was struggling with today myself. That's what I had to do to get the VLAN on the trunk ports between SRW2048 and a SLM2024. Make the port numbers to the top, but you get the idea.
SRW2048
1-12 of Harbour = VLAN 1
13-15 = port 3 VLAN, unidentified, mode = generally accept the type of weft = all, pvid 3
40-43 = 2 port VLAN, unidentified, mode = generally accept the type of weft = all, pvid 2
Port 47/48 = VLAN1, 2, 3 VLAN Trunk port = port should be vlan1, 2, 3 has joined to make you think it's the tag for 2.3 (check it, I'm 100% I added the and when I checked once again, they were gone.) "I think that changes to other environments will remove them?)
SLM2024
1-10 = VLAN 1
14 = 3 VLAN, unidentified, mode = generally accept the type of weft = all, pvid 3
16-18 = 2 VLANS, unidentified, mode = generally accept the frame type = alll, pvid 2
12 (Trunk port) Add VLAN 1,2,3 with 2.3 tagged port
Setup like that I could get access to all three VLANS on the trunk.
Maybe you are looking for
-
How can I play an AVI on Mac OS 10.9.5 when VLC does not work?
-
Error loading C:\WINDOWS\kbcrfyps.dll
When I start my computer I get the error message "error loading C:\WINDOWS\kbcrfyps.dll" I even spent money to by a booster registry to fix my registry errors that have corrected all my faults with the exception of this one. It does not seem to go wi
-
No display on TV when connected to the computer
Original title: Laptop windows 7 to a standard tv There is no picture when I connect my laptop to my standard tv. The manufacturer of the cable said she would connect both the hdmi port to connect rca on my TV.
-
Microsoft Bluetooth enumerator driver
IM using Compaq Presario V3000 laptop and Windows 7-32 bit. In Device Manager, I found that all the elements with a trademark right next to "Device Bluetooth devices" Exclaimation under other Devices.I also are the same for Bluetooth hands-free Audio
-
Hi, I use jdeveloper 12.1.3 1.1. I request ADF, master form Panel and secondary table.2. by default create insert button is enabled in the secondary table. ( button)3. no data is demonstrated at the start and it's ok because the main table of the for