menu of Tribeca has changed after adding cats and cats of void

Similar Questions

• Internet explore 8 has changed all my icons and won't let me access any of my programs

  Internet explore 8 has changed all my icons and won't let me access any of my programs

  Original title: change icons

  Hello

  Method 1:

  You can see the fix it and steps that are offered in this link:

  When you open a file on a Windows-based computer, the file may start another program

  http://support.Microsoft.com/kb/2656106

  Method 2:

  You can also scan your computer the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this information is useful.

• my child has changed my windows password and I can't get into my computer, I have xp sp3

  my child has changed my windows password and I can't get into my computer, I have windows xp sp3.

  Hi JENNHPL,

  See the below Microsoft article and try the steps mentioned, check if it helps.

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

  http://support.Microsoft.com/kb/321305

  If the article above does not help then refer the article about Microsoft policy on forgotten passwords

  Microsoft's strategy concerning lost or forgotten passwords

  http://support.Microsoft.com/kb/189126

• Display has changed after Windows update

  After you have installed the latest updates of windows on 12/12/2012, my screen has changed. All the graphics have been expanded, including the desktop icons, taskbar, tool bars, bars of window, etc.. I checked the configuration of the monitor and the icon size in the taskbar and start menu properties (which remains set on small icons), but I can't find how to go back to my original display size.

  The installed updates were:

  Update security for Windows XP (KB2758857)

  Update security for Windows XP (KB2753842)

  Update security for Windows XP (KB2779030)

  Update security for Windows XP (KB2770660)

  Update for Windows XP (KB2779562)

  A security update cumulative for Internet Explorer 8 for Windows XP (KB2761465)

  Update of security suites for Microsoft Office 2007 (KB2760416)

  Update of security for Word Viewer (KB2760498)

  and

  5.10 Skype for Windows (KB2727727), who fails to install

  Grateful for any help please?

  Thank you for your kind assistance which directed me to the solution. Change the screen resolution in the problem resolved display settings. Strange how that changed spontaneously after the restart following the installation of the security updates.

  Thank you very much

• Help! All icons on the desktop has changed after downloading a program! __

  I downloaded a program and just suddenly all my desktop icons changed to the program's icon.  I can't change after reboot, or try to change each one individually through the Properties tab.  Don't know how to get back them.  Any ideas?  Thank you

  Hello

  Restore the. File associations LNK using the 1st link here and others as needed.

  Restore the Type Associations by default Vista file extensions
  http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html

  How to associate a file Extension with a program Type in Vistahttp://www.vistax64.com/tutorials/69758-default-programs.html

  How to view and change an Extension of filename on Vista
  http://www.Vistax64.com/tutorials/103171-file-name-extension.html

  How Unassociate a Type of Extension file in Vista and a utility to help
  http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.html

  Restore the Type Associations by default Vista file extensions
  http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html
  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• currency of the row has been changed after cancel create and return to the call of workflow

  JDev 11... 2
  I have two workflow set up very similar to the task of Steve Muench and you will receive. I have master / detail in two tables on a navigation page and a different workflow that create/change for the master and detail (separately). When I create a new master, everything works well except that when I cancel and return to the appellant task, I get the "currency line has changed since the user interface has been made." The cancel task-flow-return has end transcation = rollback and restore savepoint = true and Cancel button immediately a = true. Looks like the controller looking for the newly created folder that has been rolledback. Given that this seems to be a model common vey, what is the best way to not show the warning?
  
  Thanks a lot for the pointers.

  Hello

  the usecase of yours is the standard demo I show for the workflow and I never had this problem. One reason might be that you keep the scope of the task flow DC to share instead of isolated, in which case restoring impact on the flow of both. If you want to keep shared DC then check that you return to method activity that is re - running the battery for the parent workflow

  Frank

• I recently updated my computer (the thing has changed since the problem) and now my LAN is enabled at startup, even if I turn it off before you stop. Why? And how can I stop this?

  Since my last update, that is the only thing changed on my computer since it began, my lan port is always on at the start of Vista (Ultimate).   I'm on a laptop that has a LAN on board.  I have not had this problem NEVER before and have owned the laptop for about two years now.    The only thing that has changed on the computer's windows updates.

  I spent the length of a deactivation of the adapter before you turn off the laptop and tried to load a page that is not in the temporary memory, and get the usual page cannot be displayed.  I scanned for virus using AVG and Bell Internet Security scanner online McAfee.   I also ran Windows MSRT and found nothing unusual.   I also checked to see if the BIOS has been changed somehow, and nothing has changed.   Boot to LAN is disabled.   So I can only conclude that I have a virus has not been detected (but have no slowdowns or anything different in the security under gpedit.msc logs), or the more recent Windows Update changed some settings.

  But weak and this is every time I start up the computer from the local network is enabled.   If I let the cable disconnected at startup, it does not reconnect to the modem cable after rehabilitation and I have to disable and then re-enable the LAN to access the internet.

  Please let me know if anyone else has this problem or have heard of this and know a solution.

  Thank you.

  Leqs D.

  Hi Lequarius,

  ·          You receive an error message when you restart?

  Method 1

  I suggest that you download and install the updated drivers for the network adapter on the computer by visiting the card manufacturer or computer manufacturer website manually.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2

  If the previous step fails then I would suggest that temporary you disable the security software installed on the computer and check if the problem persists.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

• Yahoo homepage has changed after the update of firefox 33, how to fix? home page looks normal on chrome and explorer, only different in mozilla, please help me

  my start page since always yahoo, after 33 of firefox updated itself, the page quite a bit bizarre, his yahoo but not as the ordinary classic. I can't seem to go back even when I cut and paste the web address off chrome or explorer, where the yahoo page looks like classic its normal self. WHY is it be changed in mozilla firefox 33? I know in firefox 32 it is normal, when I go in chrome or Explorer, it looks good and yet not flip over in my mozilla firefox even though it uses the same adresse_web. Its driving me crazy, please tell me I'm not the only one this has happened (today 15 October, 2014) and what I can do to heal/fix and do go back to the way it was.

  HI, I understand that the start page no longer appears as before. I'd be happy to pose for a screenshot of the page so that we can investigate a bug for it, but in the meantime it may be useful to use the previous version.

• Qosmio F20 - Power options menu drop-down has changed.

  Hi everyone, I wonder if someone knowledgeable can help me with this:

  In Control Panel/power options, there is a drop down menu, which + used to + have an entry of "Toshiba." No more. I have no idea how this has disappeared... Anyone know if it can be restored one way or another?

  Thank you

  As Feliks said please ensure that Toshiba Power Saver has been installed and that it s working properly.
  The changes of Power Options Windows and will be disabled if the energy saver is installed.

• WARNING when saving the changes after adding the user to the shared services

  Hi all

  I added a user in shared and all services, saving the changes I get this warning

  

  Is it safe to ignore this warning, what am I supposed to drop after you save the changes

  If you added the user in Shared Services, then no problem to save it.

  Thank you

  Mady

• Resolution of the image has changed after the calibration of the image

  Hi all

  I put my webcam resolution up to 1280 x 720, but after the Calibration of the Image, the video changed to 1364 x 730.

  This affects at the coordinate of filtering? It is very important in my application.

  BTW, Pattern Matching 4, there is an exit of matches (real world), how to give him information to translate from pixel in mm? Currently I use corresponding pixel and use a few calculations to translate correspondence in mm. And where is the origin of the actual coordinates? It is also in the upper left corner as pixel coordinates?

  Hello

  You can try using the "IMAQ convert Pixel to Real World VI" to transform the coordinates of the pixel to the real world coordinates.

  Best regards.

  Daniel.

• Index of physical memory SNMP oid has changed after system reboot

  I asked for a hot - difficulty for windows 2003 server. Server must be restarted after you apply the hotfix to hot. After the reboot, I noticed this index of oid snmp for physical RAM increased from 17 to 16. is this normal behavior for snmp to change the Index oid?

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Windows Server Forums on TechNet. Please post your question in the Windows Server Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Google play language has changed after the firmware update

  My xperia xa language is Turkish. After firmware update that he changed to English, how can I change to Turkish back...

  Solved after that reset sony pc phone app. thank you...

• Windows 7 has changed after the Automatic Updates - screen resolution may not change back

  Last night was automatic updates from Microsoft.  Today, the resolution of the screen and the icons are huge.   Tried to change the resolution of the screen through Control Panel but can not find the same as before.  I tried to adjust the zoom level on Chrome but now everything is long and lean.

  Tried to do a system restore, but it has a red x next to it and will let me not turn it on.  How to restore my resolution wallpapers and icons to their previous size etc?

  Completely, remove the current (or software) driver and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

• The system time has changed after the restart of Bootcamp

  Hello

  After a restart of the boot camp partition Windows 10. I have the wrong time, in fact its always an hour later that it is.

  Although in the Control Panel, I checked the "time of to of Appleserver" it does not update the time of its actual value. Parenthesis in Win 10 (BootCamp) time is correct, then the difference that happens just restart in Mac OS.

  System:

  MacBook Pro early 2011

  OS X El Capitan 10.11.3

  Bootcamp

  Win 10 latest version with all updates/Updates aviable

  What could be the problem?

  Thanks for your help!

  Set the time zone correctly on OSX and Windows.