Google play language has changed after the firmware update

Similar Questions

• Windows 7 has changed after the Automatic Updates - screen resolution may not change back

  Last night was automatic updates from Microsoft.  Today, the resolution of the screen and the icons are huge.   Tried to change the resolution of the screen through Control Panel but can not find the same as before.  I tried to adjust the zoom level on Chrome but now everything is long and lean.

  Tried to do a system restore, but it has a red x next to it and will let me not turn it on.  How to restore my resolution wallpapers and icons to their previous size etc?

  Completely, remove the current (or software) driver and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

• Satellite L300-1 has 3 - after the BIOS update, I get a BSOD

  I have a Satellite L300 1A 3 MODEL PSLB8E. I decided to update the version of the BIOS, thinking that he can resolve my issue of ethernet controller.

  But after the update, my laptop goes on infinite blue screen of death. How can I recover from this injury?

  Can someone please help.

  Hello

  Did you choose the good BIOS update for your model? Was it for Satellite L300 PSLB8E?

  What code you get BSOD?

  After the BIOS update you must always load the default settings. Maybe a bad BIOS setting is causing this BSOD.

• Resolution of the image has changed after the calibration of the image

  Hi all

  I put my webcam resolution up to 1280 x 720, but after the Calibration of the Image, the video changed to 1364 x 730.

  This affects at the coordinate of filtering? It is very important in my application.

  BTW, Pattern Matching 4, there is an exit of matches (real world), how to give him information to translate from pixel in mm? Currently I use corresponding pixel and use a few calculations to translate correspondence in mm. And where is the origin of the actual coordinates? It is also in the upper left corner as pixel coordinates?

  Hello

  You can try using the "IMAQ convert Pixel to Real World VI" to transform the coordinates of the pixel to the real world coordinates.

  Best regards.

  Daniel.

• LifeCam Studio has stopped working after the firmware update?

  Hi all.

  I bought one of the new LifecamStudio 2 days ago. I installed the camera, following the instructions of course. At the end of installation, I was able to get my self in the window of the Lifecam software, up to now, no problem, the device worked. Suddenly, a pop-up message will appear, telling me that the firmware of the device should be upgraded, then I pressed OK. The update of the firmware started but was abandoned shortly with an errormessage, saying the upgrade was not successful. I tried to reinstall the firmware, but now he tells me Hat I have the latest firmware installed. The nproblem is therefore now that, when I instert my camera in USB port windows find the camera, but as soon as I start any program it uses the camera he's leaving a Lifecam icon (in the hardware Manager that is) to an unknown unit. Software Lifecam studio told me that there is no camera installed. I installed the camera on other computers without a bit of luck.

  / Stefan

  Fixed it :)
  In the Device Manager under imaging devices I've seen "Webcam" - before the botched fw update, it said 'Microsoft LifeCam Studio' and was a diff driver.  I rolled back the driver (or if it does not work you can force it to use one of the program files \ lifecam) then reinstalled lifecam - my cam works now.  Now - what's the problem with this update utility and why it changes what is driving the camera uses?

• Microsoft Word has changed after the installation of Service Pack 4

  When I turned on my computer this morning, I found the appearance had changed completely - the fonts, colors, the sidebar etc. However we can tweak those who use the Panel and the other adjusts the rest very easily.

  BUT now, I find that the word seems back to an earlier version - especially visible when you try to insert graphics. He seems to be back in Word 2003, where the paintings were very heavy and difficult to use and also look different when done from the charts I used in Windows Vista until yesterday. I'm in half way through a document and need to create a consistent look for the cards and it is now impossible. What should I do?
  Thanks for any help.
  RGC
  PS I have not had this problem with my other PC in the office which is also Vista running Windows 2007.

  http://support.Microsoft.com/kb/2463332/en-AU

  do you mean this particular update?

  From your description, it may be that you have lost your 'Aero theme' for Vista.

  or colors for your monitor have changed from 32 to 16.

  Have you checked your settings?

• After the firmware update, cannot add new reading lists

  I updated from 1.01.29 to 1.01.32 and noticed some changes.

  1. the layout of the directory of the Clip is a little different.  It allows to view the Clip in this framework, "Internal memory" and in this framework, records.  Now it's just the Clip, in this setting, files.

  2. all the songs in the video for the upgrade are not visible in the music folder or any other folder.  They are on the device, because I can play them, and they take place on the Clip.

  3. with the help of WMP11, I added a new reading list for the clip.  The finer transferred playlist songs I can see in the music folder, and the reading list does not appear in the playlists of the music (even if all the playlists of the firware update see the place very well).

  When you upgrade your firmware, the Clip reset USB mode (under settings).  Back to what you had before (PSG?) and you will probably be fine again.

  Note that now, from your description, have a few transferred to your Clip in each of the MTP and MSC modes (before and after the upgrade).  There is nothing wrong with that, except that your computer can only see what's on your Clip the content transferred under USB mode you are currently connected to your computer under.  And so he can that you want to remove your hardware update, redefine your USB mode on what she was before and then transfer to the back matter to your Clip.

• WRT54G2 problem appears after the firmware update

  Hi everyone, a newbie here. Nice to meet you all and thank you in advance for your help.

  Here's my problem. I have updated the firmware on my router for 1.0.04)is Sunday, and then there are problems on my router.

  1 have a weaker signal.

  2. the router cannot detect my internet just as it has been in the past. I have to type in my PPPoE setting for example my user name and password in 192.168.1.1. Furthermore, I use AT & T DSL.

  3. my internet will totally drop off after several hours. I have to reopen it and the modem power on & off switch.

  So I want to know if I can downgrade the firmware back to 1.0.01 or is there any other setting that may help me get but it? A list of steps is better.

  Thanks again in advance and have a nice day.

  If you haven't already done so, try to do a hard reset, hold reset button of the router for at least 30 seconds with the power connected to the router, and then reconfigure as needed.

  Since I use your & AT T DSL, you can reconfigure the DSL modem, so it don't the PPPoE connection and then reconfigure Type Automatic Configuration - DHCP Internet connection router.

  There is another question that may arise with an AT & T DSL modem. My Speedstream 4100 & AT T DSL modem put the IP address 192.168.1.1 for the router WAN/Internet port. If the router is configured to the default settings, there will be a conflict between the modem and the router and none of router devices connected will be able to access the internet. The solution is to change the IP Address of the router to the router on 192.168. 2.1. Restart all router connected devices after you have made this correction.

  Also with some model WRT54G2 (happens on my router WRT54G2 V1) the wireless signal will go offline when a wired computer is started. When this happens, the work around is the power cycle that the router once the wired computer has started, or log in to the router, go to basic wireless settings page and click on the button Save the settings. Then the wireless signal comes back to the top and wireless devices will resume their connection.

• When right-clicking on a link and a window opens, I want it ask me "Open Link in New Window" first of all, not the second. This has changed in the last update.

  So I got allows you to right-click on a link and go the first option and open this link in a new window.
  I don't not like tabs, or use them.
  The latest update or version of Firefox has changed this and now
  Open the link in a new tab first, then
  Open the link in a new window.
  My question is, how can I change this back to the way it was.
  Thank you very much
  TREV

  My problem is the opposite of the OP, but the result is the same. Years of the use of previous versions of Firefox have conditioned me to open links in a new tab by selecting the second choice of right click menu without looking. After a week of trying to readjust in places reversed 'Open link in a new window' and "Open link in a new tab", I'm always unintentionally opening new windows instead of tabs every time after time. The point is, why should I have to adjust (or need a plugin external to solve your problem). YOU TEACHES ME HOW to DO THIS WAY, then why you changed it? Do you think that the reversal is most effective? A task force of new users select the new range? Do you have a taste of trial with Pepsi? Have you adopted Microsoft 'we know what you want better than you' policy? People in the drive of England on the left side of the road with the steering wheel on the right. Maybe it's actually a better way to do it. Maybe we should just rethink all cars new American model in this way and reverse all the signs from one day to the next without any warning - no ads, no choice, do it just because the engineers decided that it is better. While we're here, maybe you should adopt menu 'Ribbon' of MS then. I do sound a little angry or like if I have too much time on my hands? If so, it is because I am and I do not have enough to relearn the same tasks whenever you think of a better way to perform a basic operation. I'm sick of being 'improved' perfectly feasible programs to offers no improvement, only the need for a conversion.

• Toshiba 40SL980G - the Youtube app after the firmware update.

  Hello

  So today, I've updated the firmware of my TV (40SL980G) and after the update of the youtube app is missing and also the social place of Toshiba places is not accessible.

  I did reset TV after the update.
  I checked the firmware download page, but this model is not which are listed there.

  Someone here could help me on how to solve this problem I would really appreciate it.

  They are probably going to change something in the places of Toshiba.

  If a new firmware update is available, try to install the latest version.
  Otherwise I recommend the service Toshiba Places in the next few days again.

• Rocket of freezing to rebuild the database after the firmware update

  Hello

  I used a Sansa Fuze since May this year, and so far I'm happy with it. If it were not for the updates of the firmware works do not somehow. I don't know what I'm doing wrong, but every time after you have installed the firmware newest, the player crashes to rebuild its database. So I'm stuck with what version of the firmware was updated in May 2009. Fortunately, I discovered the trick to read data from the player despite his messy state (in other words, put on 'Hold' and plug it into the computer by pressing on |)<), so="" that="" i="" could="" reinstall="" the="" old="" firmware's="" .bin="" file="" manually.="" removing="" the="" extra="" 8="" gig="" microsdhc="" card="" i="" bought="" with="" the="" player="" didn't="" change="" anything="" either.="" however="" this="" shouldn't="" be="" i="" think,="" and="" frankly,="" it's="" been="" annoying="" the="" heck="" out="" of="" me="" since="" the="" first="" time="" i="" tried="" updating="" my="" player's="" firmware.="" first="" i="" thought="" it="" was="" just="" because="" i="" didn't="" use="" sansa's="" updater="" tool,="" but="" instead="" downloaded="" the="" zipped="" update="" installer="" manually.="" but="" even="" when="" i="" installed="" the="" official="" program="" on="" my="" windows="" machine="" yesterday="" and="" updated="" my="" player's="" firmware="" through="" it,="" the="" player="" gets="" stuck.="" interestingly="" however,="" prior="" to="" updating="" the="" firmware,="" i="" formatted="" the="" player,="" and="" when="" i="" switched="" it="" on="" the="" first="" time="" after="" the="" update,="" while="" still="" not="" carrying="" any="" data,="" the="" rebuilding="" of="" the="" (empty)="" playlist="" worked="" fine.="" only="" when="" i="" copied="" my="" songs="" back="" on="" it="" today,="" i="" ran="" into="" the="" same="" difficulties="" as="" before.="" so="" what="" i'm="" going="" to="" do="" now="" is="" what="" i've="" done="" before,="" and="" manually="" reinstall="" the="" old="">

  Frustratedly yours

  carbeck

  OK, so I got another idea just half an hour ago and plugged in my drive. My computer would easily display the files it contains, without having to resort to tricks like the one described in my previous post above. I thought that since I read that the "rocket" is a bit picky about the format of the tags, I look to those of mp3tag. I went and spent all the tags to ID3v2.3 (iso-8859-1, how backward ), delete all the comments in the files and also adjusted the number of tag to include leading zeros instead of the format "1/n. Indeed, my drive didn't have the hiccups more after the reboot. Files that were previously listed as 'Unknown' is classified in their good artist and album and probably all of the tags appear in the correct order. Yay!

• MY FONT SIZE HAS CHANGED WITH THE LAST UPDATE AND I CAN'T SEEM TO RETURN TO NORMAL.

  WITH THE LAST UPDATE OF THE FONT SIZE CHANGED ON MY EMAIL ACCOUNTS AND PAGES OF MY WORK.  IT OF SMALL, I CAN'T READ IT EVEN WITH GLASSES ON. IT IS MAGNIFIED 150 TIMES.  MY COMPANY, HE CHANGED THE RESOLUTION WHICH HAS CHANGED MY SIZES OF ICONS, BUT DOESN'T HAVE ANYTHING DONE TO MY FONT SIZES.  THE HAD ME ALSO DO SOMETHING WITH MICROSOFT THAT DOESN'T WORK ANYMORE.  SO THEY HAD ME CONTACT MICROSOFT WHO CAN HELP ME BECAUSE I CAN'T AFFORD TO PAY TO GET ANSWERS TO MY QUESTIONS.  I AM ALREADY 3 HOURS LATE FOR WORK IN TRYING TO SOLVE THIS PROBLEM.  CAN SOMEONE OUT THERE HELP ME?

  Hi ELLA SMITH (KELLY).

   

  Welcome to the Microsoft community forums. Please post your query and giving me the opportunity to help you.

  I'm sorry for the inconvenience caused.

  I will guide you on the issue of the police.

  (1) you are on a domain network?

  (2) the Windows updates were installed?

  (3) what happens when you try to change the font sizes, you get an error message?

  I suggest you refer to the link to verify that Windows update have been installed.

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  Method 1:

  You can check follow them the links below, if that helps:

  (1) change the Windows fonts
  

  http://windowshelp.Microsoft.com/Windows/en-in/help/bdc9d003-777b-4B1E-9664-2957f50870bd1033.mspx

  (2) fonts: frequently asked questions
  
  http://windowshelp.Microsoft.com/Windows/en-in/help/0caf0419-6990-45de-8D71-67f14a3ae4c71033.mspx

  (3) how to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  
  http://support.Microsoft.com/default.aspx/KB/936212

  Method2:

  un) make system restore, choose the date where the screen resolution and the fonts were ok as your restore point.

  (b) when these updates come to install again, do only ONE AT A TIME. After each installation, check if the screen is ok, and then next update and so on.

  c) in this way, you'll be able to simply update is the cause of this problem.

  If the problem persists feel free to post us. We're here to help.

  Thank you.

• Can't connect to pass after the firmware update

  I have a power connect the 6224 switch which had everything set up and I accessing me it via the web gui for about a year now. I updated the firmware a few times before with no problems.

  Today, that I upgraded from 3.3.7.3 to 3.3.11.2. I did it using the following method:

  1. I downloaded the firmware using the web GUI

  2. I checked in versions on the web link, he was transferred from GUI

  3. I used the CLI to make it the active image and update the boot code (boot system image1, update bootcode)

  the switch rebooted and technically it's work but I can't access it using telnet or the web GUI. He seems to have forgotten then login and/or changed the password.

  What can I do to get there? I have another switch like this and am afraid now upgrade that I might lose access too.

  I would like to make a connection set for the switch. You should be able to access the CLI, check logging and execution of config, see if something has changed.

• Wan interrupts the connection after the firmware update

  Looks like the latest firmware upgrade is the source of the problems.

  I've just updated my timecapsule 1 TB of first generation version 7.6.7 and my 3 TB timecapsule new version 7.7.7

  Both are connected to the router of the provider of Internet services and extend the network even in my house.

  WiFi is stable until the upgrade, but now the connection is lost every few minutes or seconds.

  Both versions are later to the respective timecapsules.

  I end up having to downgrade if no solution is found.

  I powered the two market still nothing does not. Redefine the network and tried both hidden and not hidden, yet once nothing doesn't.

  Any ideas on what is causing the problem?

  Well, since nobody seems to have an explanation, and Apple are not out with firmware update after 7.7.7 and 7.6.7 I decided to downgrade the firmware to the previous version. I now run version 7.7.3 on the new 3 Tb Time Capsule and 7.6.3 on the 1st Gen Time Capsule. So far, the network is stable. Using WiFi Explorer Ii see that they use channel 6 and 8 respectively. Signal is strong and no dropouts have taken place so far. Hope the issue is resolved in the next firmware update.

  As I read in another post: firmware update does not solve a problem, you didn't. However, it can create a problem that you didn't.

• British English chosen for keyboard but my @ above the number 2 has changed "since the last Update. He want to come back...

  Since the last OS update two or three days ago my pre-selected keyboard has changed.  They keyboard watch my @ sign is greater than the number 2 - and it has always been up to was last updated.  Now he has changed places with the "display sign beside the semicolon key.;  I have UK chosen as my favorite keyboard, but this seems to be too governed by something else. How can I fix this to what it was?

  If you go to System Preferences-> keyboard-> input methods is your keyboard the value 'British' or 'British PC?'

  I ask that the keyboard layout of the standard British PC has quotation marks ("") above the 2: