saving configuration BIOS of motherboard intel

Similar Questions

• I need a part number for a dv9000 series audio connection motherboard Intel... Please.

  I have a HP dv9723cl that I finally gave up on due to some problems with the motherboard that no one seemed to have ideas for. Well, I bought a replacement motherboard, but accidentally bought a motherboard Intel instead of card mother AMD that was originally there. Now I'm trying to put it in, and all connects together fine (after buying another CPU and CPU sinks) with the exception of the little girl that the ir receiver and the audio jacks are mounted on. The end of the cable that connects to the motherboard is too broad for this replacement motherboard.

  Someone at - it a part number for the correct audio Panel? I bought 2 different audio cards with 2 different numbers just in the hope that one of them has had reason, but none were correct. Both had the same wide end to the connection on the motherboard.

  Please, someone, anyone, tell me if you know the right part number, or where to find it. Or maybe even a link eBay at good advice if you feel generous.

  The following were found from the parts for a DV9650US page .

  It seems that the audio Platinum for this device, which uses the same motherboard you purchased based on the number of the piece, is 449763-001.

  Printed circuit board (Interface)
  		432987 001	The power button - includes power cable key board IS NO LONGER INCLUDED		N	N/A-	Modified
  		432991 001	Wireless switch board - includes cable wireless switch Board IS NO LONGER INCLUDED		N	N/A-	Modified
  		432992 001	Optical disc drive connector Board IS NO LONGER INCLUDED		N	N/A-	Modified
  		448437 001	Platinum connection of USB ports IS NO LONGER INCLUDED		N	N/A-	Modified
  		449762 001	Before USB ports connection Platinum IS NO LONGER INCLUDED		N	N/A-	Modified
  		449763 001	Map of circuits audio and infrared (IR) - contains the IR receiver, microphone, line-in and taken helmet IS NO LONGER INCLUDED		N	N/A-	Modified

  I can't guarantee that the audio card, that this unit has will align with your current deal.

  What I would recommend enter the part number of motherboard on the HP PartSurfer link above and re-cutting references printed circuit card (Interface) until you find the one that matches.

  A quick comparison returned this page for your laptop current.  However, there were more different hardware configurations a dozen for the model you listed.

  To get anything specific, I'll need the product number of the unit.  The product of the listed number is gp348av.

  NOTE: Provide NOT the serial number.

• Envy x 360 laptop: HP Notebook System Bios update system (Intel processors) could not be updated

  I get an error of update failed trying to imstall the next update:

  HP Notebook System Bios update system (Intel processors) Impossible to update

  Is there a way to properly update this? What is a critical update?

  Thank you

  Anthony

  Hi @WildFan,

  Thanks for getting back to me.

  Yes, I can give you links to the downloads.

  Updated HP Notebook System BIOS (Intel processors)

  Driver and Intel Chipset Installation utility

  Hope that help.

• Exchange motherboard intel with amd one?

  I have a HP dv6-1230us. initially, it came with a motherboard intel with a core 2 duo cpu. I would like to change for an amd one because I love graphic integrated better than Intel amd (and it's a upgrade relatively cheaper than buying a new gaming machine). I know that HP laptops AMD to the dv6-1000 line based and photos I've seen on eBay, the form and the location of most of the ports is the same. I was wondering if it would be possible to Exchange my Intel motherboard with a
  AMD one?

  Thank you.

  Yes. I wouldn't recommend change, but you can do it.

• Error buffer 200016 against the recess now on a motherboard Intel Extreme

  Hello

  Undernourishment 200016 buffer was previously reported on motherboards ASUS PK5 - SE and P5LD2-SE in February 2006:

  http://forums.NI.com/NI/board/message?board.ID=250&message.ID=19597&requireLogin=false
      http://forums.NI.com/NI/board/message?board.ID=250&thread.ID=34384
  In fall 2007, I reported this ERROR 200016 on MAX and my software to the United Kingdom OR support, and they said that the problem was due to some ASUS motherboards and that it was not a problem EITHER.

  Unfortuantely, one of my external users to the Japan found the same problem on an Intel Extreme Series motherboard, and the error occurred during an internal software Trigger start rather that start external trigger.  His computer is composed of the following elements:
  Phones Intel DP45SG Extreme Series with an Intel P45 chipset and a LGA775 socket
  Intel Core 2 Duo Processor E7300 / 2.66GHz / front side bus at 1 066 MHz / 3 MB L2cache
  SAPPHIRE Radeon HD4650 graphics card
  Windows XP
  NI PCI - 6229 - M series
  NOR-DAQmx version 8.7.1

  He concluded that the 200016 error occurs also with internal software trigger Start in
  Measurement and Automation explore (MAX) at the rate of AnalogOutput at 40 kHz, but not at 10 kHz
  my little program Visual C 6.0 (VC_ContIO_40khz_2AO_DO_5AI_200016.exe and the source code included in attachment)

  Therefore, this error 20016 occurs in MAX and now is DEFINITELY A PROBLEM on the Intel Extreme motherboards.

  Recently, Thierry S of nickel has found a solution to error 200016 with Start of Trigger external for LabView with the hope that this error of the difficulty to be inserted into a future version of NOR-DAQmx:
      http://forums.NI.com/NI/board/message?board.ID=250&message.ID=45659&jump=true#M45659

  In your solution to the error on ASUS 200016 and now motherboards from Intel Extreme, would you like:

  (1) apply a solution DAQmx to start to trigger internal software so that start to external hardware trigger and

  (2) integrate this solution into NOR-DAQmx as soon as possible.

  Also, I've included a demonstration of Visual C program (VC_ContIO_40khz_2AO_DO_5AI_200016.exe with source code) to the internal help software Trigger that captures error 200016 containing the following software start code in case it is a help:
  DAQmxErrChk (DAQmxStartTask (hAOtask));
  DAQmxErrChk (DAQmxStartTask (hDOtask));
  DAQmxErrChk (DAQmxStartTask (hAItask));
  and this code that intercepts the underrun error 200016 buffer on a card mother Intel Extreme
  DAQmxErrChk (DAQmxIsTaskDone (hAOtask, isTaskdone));     intercepts status code error-200016 on the motherboard Intel
  NOTE: In the code I mistakenly mentioned 200018 rather than 200016 error correct, and Japanese user has replaced the video card ASUS HDMI with a SAPPHIRE Radeon HD4650 for this test video card, so no equipment of ASUS is in Japanese test machine.

  Thank you.

  Sincerely,

  Bill Anderson

  Hi Andrew,

  YOUR FIX ŒUVRES!   My Visual C program with your added changes in works fine on the Intel Extreme motherboard, and my program C ++ Builder works fine on the Intel Extreme Motherboard, as well as on the ASUS P5xxx motherboard.

  Thank you very much

  Bill Anderson

• update the BIOS of motherboard for HP Pavilion M7570n and now my computer going in circles

  I have a HP Pavilion - XP or version of the original software m7570n!

  Motherboard is HP/Compaq name: Leucite-UL8E

  http://support.HP.com/us-en/document/c00714544

  I downloaded and installed from HP website: update the BIOS of motherboard P5LP - THE

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=PV-54482-1&cc=us&DLC=en&LC=en&...

  Now my computer boots into a circle.  It begins... window XP blink... I can see a quick blue screen and some info, but too fast to read... then at startup mode without failure, etc, etc, etc! Each option piced it goes back to the circle of frustration.

  I entered F1 and set it for return to the settings by default, but who has not set.  I see several suggestions to pull CMOS jumpers, but fear just start riders pulling and causing damage.

  Someone can give me a step by step repair to understand where and how update BIOS software... is so simple that all reinstall the same file again?  I have the origianl file downloaded on my USB key.  I'm not comfortable with moving forward in fear of more damage!

  THANKS FOR ANY HELP IN ADVANCE!

  TIM

  NOW FOR THE FINAL SOLUTION:

  Google is my - so true!  I did google how to reflash the BIOs, but I kept? How I was going to do when I've never seen a 'USB key' as an option in the BIOs boot sequence.  I then looked to do the 'flash' of a CD - with the boot BACK on it, files but everywhere I read on line discussing this method - said most flash programs require you to save first the old BIOs files - you can't do from the BACK / BIO Flash or at least I haven't found a way to BACK startup disk!

  NOW, I'M TOTALLY FRUSTRATED!  Now what should I do?  I knew that the 'blue screen of death"contained the error message that I need to know! I just need to read it, but I couldn't because it flashes in a fraction of a second? GRRRRRRRRRR

  WELL!  I grabbed my digital camera Sony - put on 'SPEED' shot!  I started the computer and kept shooting until I captured the screen!  The error message was "0x0000007B"!

  I googled the error message and found this site:

  http://pcsupport.about.com/od/findbyerrormessage/a/stop0x0000007b.htm

  I have read on the list of options and decided that the setting in the BIOs should be where I wanted to start.  I changed the setting for the "RAID" to FDI HHD... BINGO!  I'm back in the game!

  SO THANK YOU FOR YOUR HELP AND TAKE THIS INTO ACCOUNT FOR FUTURE TECH SUPPORT QUESTIONS!

  TIM

• Windows 7 will be installed on motherboards Intel abandoned?

  I want to update my two motherboard Intel for Windows 7 computers.  A computer has Intel D915PCY Desktop Board, and the other computer has Intel D945GNT Desktop Board.

  Windows7 Upgrade Advisor program reports two capable tips for upgrading to Windows 7, including all the drivers compatible with Windows 7.

  However, the Intel Web site says these mothers have no support for Windows 7.  Windows 7 is not listed as an operating system supported for these two boards.  "Intel is not currently considering develop and offer Windows 7 drivers."

  Should I try the upgrade, or do I new motherboards before moving on to Windows 7?

  If the Upgrade Advisor said OK, I'd go with it. Ron

• Installation of apps using node saved configuration file

  I install the applications node by using the saved since installing the DB configuration.

  
  

  Peut someone tell me what need passwords to enter when you select the saved configuration?

  
  

  WebLogic Server password?

  User OS apps password?

  User Apps DB password?

  
  

  I guess they are by default because I didn't go for these values during the installation of DB, but do not know what the default values should be.

  In addition, the location of the config on the applications node file matter?

  WebLogic Server password?

  You type the password which is "welcome1' by default.

  User OS apps password?

  This is the password of your user account OS with the files.

  User Apps DB password?

  These are the default 'apps'.

  In addition, the location of the config on the applications node file matter?

  N °

  Thank you

  Hussein

• Pavillion E9250T: Raid 1 on motherboard intel

  When I upgraded to W7 to W10, my Intel Matrix Storage Manager disappeared and I learned that it is no longer supported.

  As you know, about three days after making that the main drive of a raid1 configuration. has failed.

  Can I replace this drive using the 'I control"to enter the bios at startup.

  .

  OK, I know this is an old system and I have another on the way.  My other option is to return to W7, but I'm uncomfortable that until my new system arrives and I get stuff migrated by.

  Hello:

  The Intel Matrix Storage Manager software has been replaced by the Intel Rapid Storage Technology (RST) software.

  If you can rebuild your RAID array using the Matrix Storage Manager software, then you should be able to do the same thing with the software of the RST.

  You want the last file on the left side of the Web page.  It should work on W10 too.

  https://Downloadcenter.Intel.com/download/23496/Intel-rapid-storage-technology-Intel-RST-RAID-driver

• Updating BIOS for motherboard Μatx-IG41-H on format Microtour Compaq 500 b

  OK, here's my problem;

  I just bought a 4GB Ram DDR3 1333 Mhz Kingston for my computer format Microtour Compaq 500 b. But when I try to connect this new RAM for my motherboard, pc gives error of RAM and that it does not open.

  It works well with other computers.

  Support members told me to update my Bios, but I can't find any update file which is updated. The only thing I could find is the following; http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = HR & prodTypeId = 12...

  I hope someone can help me with this.

  Thanks in advance...

  Here is the HP Compaq Business Desktop ROMPaq Firmware (ROM family CPT006) aka BIOS downloads for HP/Compaq 500 b/510 MT Professional computer. These BIOS/firmware updates do not appear to address any memory related questions. HP/Compaq 5xxB MT maintenance & Service Guide;

  Memory:
  The computer comes with synchronous dynamic RAM 3 double rate
  (DDR3-SDRAM) dual inline memory modules (DIMMS).
  DIMM DDR3-SDRAM:
  Media memory on the system card can be filled with up to two industry standards
  DIMMs. These media memory are filled with at least one DIMM preinstalled. To achieve the
  maximum memory support, that you can fill out the card system with up to 4 GB memory
  configured in a high-performance dual channel mode.
  For the proper functioning of the system, the DDR3-SDRAM DIMM modules must be:
  240 industry standard pins
  unbuffered PC3 - 10600 1333 MHz compatible
  DIMM DDR3-SDRAM 1.5 volts
  DIMM DDR3-SDRAM strips must also:
  support the latency CASE 9 DDR3 1333 Mhz (9-9-9 calendar)
  contain the compulsory particulars of the JEDEC SPD
  In addition, the computer supports:
  512Mbit, 1Gbit and 2 GB non - ECC memory technology
  front and double-sided DIMMs
  DIMMs built with devices DDR x 8 and x 16; Built with x 4 SDRAM DIMMs are not
  support
  NOTE: The system will not work properly if you install unsupported DIMM modules.

  The total State "up to 4 GB' plug... which is in both slots, therefore each slot can only use a 2 GB DIMM.

• HP ENVY Phoenix 860-000nd: cannot change bios Phoenix language - utility Configuration BIOS HP - HP ENVY 860-000nd

  Hello

  trying to change the language of the BIOS, the Bios HP Configuration utility, but get the error code 6 - access denied (failed due to permissions of the BIOS).

  BIOS version is vA0.08 THI.

  I can read (get) successfully, but cannot change any settings... tried to change other settings to no avail.

  What Miss me? Should I first set a password?

  Hi there @mucckki,

  Welcome to the Forums of HP Support!  I understand that you want to change the BIOS language on your system in current Dutch English.  I'm happy to help you with this.

  Was the Dutch language that the BIOS was set to out of the box or he later changed in Dutch?

  If original default systems was English, you can try to look at the motherboard of your system guide. HP and Compaq Desktop PCs - specifications of the motherboard, Thimphu. At the bottom of the page is an indicator for the riders for the BIOS and CMOS password. If your default language was English, you can use the jumper to clear the current CMOS settings, including language.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Holly AAHD2-HY Pegatron Bios Update motherboard

  Is someone can you please tell me if there is an update available for the motherboard bios above.  I have upgraded to windows Pro 8.1 with Media Center.  My system information is below.

  Name of the Microsoft Windows OS 8.1 Pro with Media Center
  Version 6.3.9600 Build 9600
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  Name of the system
  System manufacturer Hewlett-Packard
  P6-2100 model system
  System Type x 64-based PC
  SKU QW795AA #ABA system
  A4-3420 APU AMD processor with 2 logical processors, 2 Lossnay, 2800 Mhz, graphics HD Radeon (TM)
  BIOS version / Date FRIEND 7.15, 16/12/2011
  SMBIOS Version 2.7
  Embedded Controller Version 255.255
  UEFI BIOS mode
  Baseboard manufacturer PEGATRON CORPORATION
  Model baseboard is not available
  Name of plinth base
  Role of platform office
  State of secure boot not supported
  PCR7 Configuration binding is not Possible
  Windows directory C:\Windows
  System directory C:\Windows\system32
  Boot Device \Device\HarddiskVolume2
  The local United States
  Hardware Abstraction Layer Version = "6.3.9600.17196".
  Eastern Daylight Time zone
  Physical memory (RAM) installed 8.00 GB
  7,49 GB total physical memory
  4.49 GB available physical memory
  15.0 GB total virtual memory
  12.0 GB available virtual memory
  Page file space GB 7.50
  Paging file C:\pagefile.sys
  Hyper-V - VM monitor Mode Extensions Yes
  Hyper-V - second level address translation Extensions Yes
  Hyper-V - virtualization enabled in Firmware No.
  Hyper-V - data execution Protection Yes

  Hello MattNC79,

  I understand that you are looking for an update of the BIOS of your desktop PC HP Pavilion p6-2100 using the card mother AAHD2-HY (Holly). Unfortunately, I couldn't locate an update of the BIOS for that motherboard at this time.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• How can I find my type of motherboard intel

  I'm trying to update my sound driver but I need to know what kind of card I have. can u help

  Currently, I have

  Sound Devices
  -------------
  Description: Intel(r) Audio integrated
  Default audio playback: Yes
  Default voice playback: Yes
  Hardware ID: PCI VEN_8086 & DEV_2485 & SUBSYS_02221014 & REV_02
  Manufacturer ID: 1
  Product ID: 100
  Type: WDM
  Driver name:

  Driver version: 5.10.0000.3523 (English)
  Driver attributes: Final retail
  Would be WHQL logo: Yes
  Date and size: 96256 bytes, 17/08/2001 12:20:04
  Other files:
  Driver provider: Microsoft
  HW Accel level: full
  Cap flags: 0xB5B
  Min/Max sample rate: 8000, 48000
  Mix beef static/Strm HW: 1, 0
  Static/Strm HW 3D steers: 0, 0
  HW memory: 0
  Management of the voice: No.
  Listen/Src/EAX (TM) 2.0: No, no
  Listen/Src/I3DL2 (TM): No, no
  Sensaura (TM) ZoomFX (tm): No.
  Registry: OK
  Sound Test result: does not work

  I went to IBM, but the brand and the model you gave me helped a lot. Your best bet is to draft.exe and run the belarc advisor pc from the link below and it will tell you the exact brand and model of your motherboard. It will also tell your if you are missing security updates.

  http://www.Belarc.com/free_download.html

  Hope this helpful.

  Note: It is not advisable to mark a reply as an answer until your problem is definitely solved. You can set apart it as a his unresolved response still. Thank you.

• bios update motherboard M2N68-(Narra5)

  need a update in order to run the hard drives of 4 t. 6.01 running 29/09/2010.

  You don't give much info system, but here are the basic system requirements, you must use a plu 2.2 TB HARD drive

  Need a 64-bit operating system
  * Motherboard that supports UEFI [successor to the BIOS]
  * Support for GPT partitions [instead of MBR]

  Your system meets these requirements?

  If you found my answer helpful please say thank you by clicking the s cursor Up icon. Thank you!

• can I change my presario cq3420an pc amd motherboard motherboard intel?

  I have a PC Compaq Presario CQ3420AN with an AMD processor, now I want to change the CPU of the pc and the card mother intel motherboard and core i5 or i7. My question is, is - it possible and if it is possible, what is the mother of Scripture?

  Yes, it's possible, but you may have problems with the locations of screw holes not macthing mounting of the new Council... may have problems with the rear plate I/O... your HP no installed OS will no longer... function and your HP recovery disks become useless for you. If you decide to accept these risks and to buy a new OS, so go ahead and have fun. Here are the current specifications for your Compaq Presario CQ3420AN desktop computer. Please make sure you get a Board microATX (9.6 "x 9.6"), which uses the DDR3-1066/1333, has an integrated graphics card (otherwise, you will need to buy a graphics card) and working with a 250 watt power supply.

  Frank