Menus and buttons to recall?

Similar Questions

• HIGHLIGHTS HD Blu - ray DVD project - built at-SD and BUTTON TEXT

  I use Encore CS4 on a Mac Pro running 10.6.5. I drafted a Blu - ray and built my menu inside Photoshop CS4. The menu is 1920 x 1080 and has several buttons text. The buttons are consisting of a layer group ' (+) button name ' with a text on the inside layer. Initially, I selected the option 'Create text subpicture' for each button on the inside yet. I tried later to create inside each button subpicture layers defined in photoshop by creating "(= 1) button subpicture" layers within each group of 'name of the button (+)'.

  I have set up my games color and in the preview again and engraved on a Blu - ray disc button highlights look crisp and clear. I then try to generate output of DVD on a DVD format disc. My highlights of the menu are very irregular and the edges of the text seem to be cut off (I see the color of the normal state).

  I made sure to disable antialiasing on all my text buttons. I also expect a lot of reminder of the downscaling ability? If I resize my menu from 1920 x 1080 to 720 x 480 and replace it BY NTSC widescreen in Photoshop and then start with a new DVD project in everything seems fine. I hope not having to rebuild the chapter menus and button routing every time I create a project both BD and DVD.

  The buttons of my chapter menus work fine. Don't know what the difference with the exception of a different color welcomes you. I compared the menus in photoshop and all settings appear to be the same.

  The downscaling of the menus again from HD to SD quality is absolutely horrible. That's why I always build separate projects for Blu - ray and DVD, despite the ability of the program to output DVD and Blu - ray for a single project. You will get much better quality by reduction of scale your menus in Photoshop.

  My company creates motion menu to recall model kits, and we create a separate button for each format highlights (HD, SD, PAL) in Photoshop for our products, simply because of the unacceptable quality of the downscaling of the still.

• In the forum Coursera pages there are different icons and buttons, but I see that only holders of palce, small squares with letters in there. Any help?

  In the pages of the coursera.org forum, there are different icons and buttons. They do not display correctly. I can see only tiny forms square with characters in them. Hovering on them can display information in some cases, but it is not very convenient. Although they recommend Firefox, I use Chrome instead. Chrome has no questions here so far. Is it possible to view these icons correctly?

  Many sites now use downloadable fonts to create their icons instead of the traditional image files. So, there are some Firefox settings that might be a factor, as well as the NoScript extension, if you use this (blocked objects).

  (1) in the dialog box fonts Advanced, unchecking the checkbox which allows the site to use its own choice of fonts. To check that:

  "3-bar" menu button (or tools) > Options > content > button "Advanced".

  Here you must "allow pages to choose their own fonts.

  (2) on the deactivation of fonts downloaded in: config. It's less likely, or you remember probably not, but here's how to check on it.

  • In a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.
  • In the search box at the top of the list, type or paste the gfx and make a pause so that the list is filtered
  • If gfx.downloadable_fonts.enabled preference is bold and user, set false, double-click it to return it true.

  This seems useful.

• Is it possible to resize the bar of menus and other toolbars to make them smaller vertically?

  With the update for Firefox 4 my bar menus and toolbars are now take up significantly more space than they where before - is it possible to resize them so that they take up less space?

  You can try one of the compact themes.

  • https://addons.Mozilla.org/en-us/Firefox/themes/compact

• My drop-down menus and bookmarks disappeared. How to make a comeback?

  Today, without doing anything to the browser, drop-down menus of Firefox, and my favorites were all gone and I can't understand how to get back them. I still have the icons for the basic tools, like the home page, but all regular pulldowns, which I use frequently, have disappeared. Any ideas?

  I already downloaded the latest version of Firefox to see if it worked and it did not. Anyone?

  For more information about how to restore the menu bar, see what happened to the menus file, editing and?. This article shows how to bring the bar of menus and other toolbars missing such as the bookmarks toolbar. If the bookmarks themselves disappeared, see retrieve lost or missing bookmarks.

• I just started using my new iMac 27 "and in Mail, I can't find the setting to display a column that shows the number of emails in each folder.  Mavericks, I had this column.  I have checked all the menus and preferences and search online.

  I just started using my new iMac 27 "and in Mail, I can't find the setting to display a column that shows the number of emails in each folder.  Mavericks, I had this column.  I have checked all the menus and preferences and search online.

  Click the triangle next to the Inbox to view the Inbox for each account. Then select the desired mailbox and the information will be displayed in the upper part.

  You are entitled to 90 days telephone support from Apple. Try to contact them.

  Apple Support contact

  Apple Support by email or chat

  Contact Apple Support - phone

• HP Pavilion 17-f065us: power and buttons f6 (Mute) remain lit after a stop on HP Pavilion 17 - f065us

  I have upgraded to Windows 10 in October 2015 and everything worked very well until about two weeks ago, I noticed that when I would stop my computer Power and buttons f6 would remain lit.  I would go ahead and close the lid of my but next time I would go to to open they would always be lit.  I have to press on and hold the Power button until the lights go out.

  Hello

  Try disabling the startup of Windows 10 hybrid - you can do the following.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close open windows and stop the laptop by right clicking on the icon from the Start Menu, select prompt (Admin) and click 'Yes' to the uac prompt.

  Type (or copy and paste) the following command (including spaces) and click Enter.

  Shutdown /s /t 0

  Start Notepad and let Windows take over completely for a few minutes before checking if the lights now now disable to stop correctly.

  If this has fixed the problem, it may be useful by turning the quick start back on - sometimes simply remove and re-create the file will solve the problem.

  Kind regards

  DP - K

• by clicking on the apple logo, menus and check boxes do not work on the first click

  Strange behavior from El Capitan OS X 10.11.1.

  When I click on the Apple Logo, menus, and check boxes, the action does not stick.

  To open the Apple Logo, the menu appears quickly but then folds upwards, as if I had not clicked.  Pretty well, click on the third, the menu opens.

  In the Finder, when I click on a menu like file, edit, or display, the menu appears, and then restores upward. Again, after three clicks in opens.

  In Safari, on a page Web, clicking on a checkbox does not stick. I need to click three times.  I when in Safari settings to clear the cache, I also checked the box to request the site "don't follow me." And even in the actual application of Safari, the box wouldn't fit.  I clicked it three times before the box stuck.

  Installation program:

  iMac 24 - early 2008

  4 GB

  El Capitan 10.11.1

  I changed the mouse, and this has solved the problem.

• his silence and buttons wireless seems to have been disabled

  I accidentally spilled coffee on my notebook Pavilion dv6 notes and in a frantic attend to mop up the liquid, I must have somehow disabled the silent sound and buttons wireless while wiping the keys.  They worked before the oil spill, but not after.

  Also, as an aside, the left shift key works more so.  It can be bypassed, but it would be nice if the worked.  Any help would be appreciated

  Hey @306hp ,.

  Thank you for visiting the Forums HP's Support and welcome. I read on your HP laptop and get a fix of coffee. Try perform a reset. When you perform a hard reset note remove all USB devices and remove cards memory card reader location. Disconnect all non-essential devices.

  If that doesn't help try to turn on the computer, on which you begin to press F11 repeatedly until the menu opens. You can do a System Restore. System restore allows you to convert any changes that might have happened after the accident.

  I would use q-tips to ear slightly moistened to clean around the stuck key. Coffee gets in it a causes it to stick.

  Hope it will be useful.

  Thank you.

• Windows and buttons locked tab appearance on screen

  I don't know why, but my windows and buttons drop-down menu is locked to the appearance on the view menu tab

  Here is a picture http://imageshack.us/photo/my-images/199/probro.png/

  My profile
  Intel Core i3
  3.10 Ghz clock speed
  Intel High Defination Familly with 1024 MB of VRAM graphics
  Windows XP Professional SP3 32-bit version
  4 GB OF RAM
  500 GB hard drive
  Help me

  Hello

  • How long have you been faced with the same question?

  You can view these methods:

  Method 1:

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Note:
  How to configure Windows to use a Normal startup state
  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.
  1. click on start and then click Run.
  2. type msconfig and click OK.
  The System Configuration Utility dialog box appears.
  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.
   
  Method 2:
  You can check in another user account.
  How to create and configure user accounts in Windows XP
  http://support.Microsoft.com/kb/279783
   
  Method 3:
  I also suggest you to update display drivers on the manufacturer's Web site.
   
   

• What do you do when windows and buttons is gray out?

  Hi, my name is Rhionna and I have a problem on my Windows XP Service pack 3. Well, last night, I scanned my PC for registry errors there were some and I fixed them, but now I can not apply visual styles. Windows and buttons in properties is grey outside, it wasn't before but today I went to a link to a website to try to repair the files in my theme after that, it was gray would be out so what do I do? :(

  Registry cleaners are dangerous programs.  I do not recommend their use for these sorts of reasons.  Your best bet at the moment is to restore your registry to a time before you had this problem using "System Restore".  One of these two methods, you should get going again.

  "How to restore Windows XP to a previous state"
    <>http://support.Microsoft.com/kb/306084 >

  If you cannot start the program of the above procedure, or if it fails to restore, then try this:
  "How to start the System Restore tool by using the option of safe mode with the command prompt in Windows XP"
    <>http://support.Microsoft.com/kb/304449 >

  HTH,
  JW

• Problem with wheel scrolling and buttons on Microsoft mouse optical basic v2.0 in Vista

  Hello recently, I logged on to my computer and found out that my laser mouse does not shine by the sensor and the pointer didn't budge when I moved the mouse wheel works only the buttons and scroll

  Why what happened?

  wheel scrolling and buttons on my mouse works nothing else don't

  EDIT: im using a basic v2.0 mouse Microsoft Optical

  Nope it na no:(mais c'est correct, je pense que c'est un problème matériel et j'ai acheté une nouvelle souris qui fonctionne très bien)

  but thanks for your help when even :) as I'm not sure how this forum works, but I think a mod should close this question

• How can I disable the "hand-with-a-pen-icon" in the seizure, drop-down menus and check boxes boxes in IE 10?

  How can I turn off the hand-with-a-pen-icon that appear in the entries of the form (for example, text boxes, drop-down menus and check boxes) in IE 10? I'm running updated Windows 7, 64-bit desktop with without a touchscreen. I have the Wacom tablet with a pen, but I disabled the handwriting feature in Windows.

  And also how to disable query points that appear in the scroll bars in the browser? Sometimes the mark points will blink, then this hand-with-a-pen-icon appears between. It does not appear in other browsers or programs and its was not in IE 9.

  -It is very annoying, especially when dealing with checkboxes and drop-down menus, I know never it is checked or not. --

  I have not found all the settings for this in IE 10 settings or control panel.

  Same problem here.
  I have w7 x 64 office services and tablet and writing are disabled.
  However, I see the shit 'hand with a pencil icon' in all the check boxes and drop down menus.
  It is not even recognizable on small boxes and is a total bore.
  I run my desktop PC with w7 x 64 for over a year and the symbol appeared after I've upgraded to IE10.
  I couldn't find an appropriate solution in the links provided in this thread, and I hope that it will be a good solution soon.
  To give an idea, I downloaded 2 screenshots on my skydrive
  https://SkyDrive.live.com/?CID=1C240C8A7B1412A2&ID=1C240C8A7B1412A2! 110 #cid = 1C240C8A7B1412A2 & id = 1C240C8A7B1412A2. 110

  Meanwhile, I think that I found the real cause.
  I had turned off the segue UI fonts during the day even when I updated to IE10.
  Strange as appears only in IE10 I assumed it it was due to the update.
  As explained in this thread that it is obviously a police problem well.
  http://answers.Microsoft.com/en-us/IE/Forum/IE10-Windows_7/IE10-shows-square-blocks-on-every-dropdown-menu/068079a1-47AB-496a-8358-4391b564aaee
  I still have not solved not satisfactory, but at least I now know the cause.

  IT FIXED:
  to do my reading sharper, I had turned off cleartype according to http://www.davidjnice.com/articles/windows7_fonts.html
  I'm now setting replace to

  "Segoe UI Symbol (TrueType)"="seguisym.ttf" and voila, the handwriting symbol in IE10 is gone again.
  

• How can I bitlock a device without going through the appropriate menus and related software to lock and unlock a device?

  Original title: ILO-locked usb device

  I have a 64 GB... new USB key... and put music on it. After a while, I decided to use it for another use, but could not remove the files because the device is write-protected. I never write protect anything.

  I had an individual look of microsoft cert to the USB and he said it was not locked.

  I did some research on bit locker and Win 7 Pro and discovered that I can't find the Group Policy Editor where all bit locker said tech data is located.

  So, how can I lock bit, a device without going through the appropriate menus and associated software application necessary to lock and unlock a device?

  Hello

  When you turn off BitLocker, you can either disable BitLocker temporarily or to decrypt the volume. Disable BitLocker allows TPM and other minor changes module changes the system. Decrypt the volume means that the volume will be entirely decrypted, and that all the keys are ignored. You must decrypt a computer before the operating system upgrade. Once a volume is decrypted, you must generate new keys through the encryption process again once, if you want to enable BitLocker.

  Before you start

  > You must be logged in as an administrator.

  > The volume must be encrypted.

  To turn off BitLocker Drive encryption

  (a) click Start, click Control Panel, click Security, and then click BitLocker Drive Encryption.

  (b) from the BitLocker Drive Encryption page, find the volume on which you want BitLocker Drive Encryption goes off, and click turn off BitLocker Drive Encryption.

  (c) what level of decryption do you want the dialog box, click disable BitLocker Drive Encryption or decrypt the volume as required.

  (d) by performing this procedure, you have disabled BitLocker or decrypted the operating system volume.

  For more information, see the articles:

  Turning off BitLocker Drive encryption

  How to use the unlock options in BitLocker Drive encryption?

  Protect your files using BitLocker Drive encryption

  Hope the helps of information.

• How to check the links and buttons of enamel are traceable? If I send the email through Eloqua?

  I sent you an email through Eloqua. I don't know how to check the links and buttons are traceable?

  Hi Lucie,.

  There are 3 ways to check your links and buttons are traceable or not:

  1. When you mouse pass the link or button it will not display the actual URL. It will show you a few encrypted URL which will redirect you to the actual URL.

  2. connect to the eloqua account and search your email. When your email open ups click setting ICON and then click on manage links. All the links and URL of the button should be checked.

  3. If you want to check at the level of the code make sure after all the links and buttons URL "elqtrack = true" must be written.

  Hope this will help...

  Thank you