message "16 bit pograms in use too.

Similar Questions

• Error message when you try to use Toshiba Disc Creator

  I recently upgraded to Vista SP1 SP2 and now I get an error message when I try to use Toshiba Disc Creator 2.0.1.3. "An unexpected error has occurred. Error code 32007C-26-00000001 "it worked perfectly before.

  This is the first time that I used it since the update so I think that SP2 may be part of the problem, but I'm not sure. I could not find updates for TDC. My system is a Satellite L305-S5919 with Vista 32 bit.
  Someone has an idea of what could be the cause of this error?
  Thank you

  Have you tried to roll back the OS in time and checking the previous features once again, just to be sure, it has something to do with the installation of SP2?

  I put t know if anyone here can offer a solution but I m quite pessimistic in this topic and don t think that Toshiba provide new version.
  AFAIK Toshiba disc creator is always available with single and also downloadable image recovery application.

• Errro message "cannot copy file: path is too deep.

  Inequality on the what, why, how do to the error message "cannot copy file: path is too deep." I would like to know the causes and possible prevention and or all of the information available on this issue. The problem occurs when copying large files and sometimes small files on external hard drive to the top.

  Even though the file itself may become a 9-character file name extension, it could be buried inside several files.  Thus, when you step on your external USB drive and it appears as, say, M: drive, the number of characters in the complete path to the file starting with "M:\. "and including all of the directories in the path to the file as well as the number of characters in the name of the file itself must not exceed 255 or Windows refuses to handle.

  Robocopy is a command line program.  You must type in the command from a command prompt window (start-> Run-> "cmd").  It works by accessing the file using a set of routines to copy the different library that does not have the limit of 255 characters.  A documentation file must accompany Robocopy explaining how to use it.

  Another method that might work for you is to take the folder that your .wmv file is in (or maybe both files above) and to temporarily move to the root directory of your external hard drive.  This shorten the path to the file and allow a normal copy of work.

  HTH,
  JW

• Error message: "the file names would be too long for the destination folder.

  I move the files from internal hard drive to external hard drive using cut and paste.  I get a message "the file name would be too long for the destination folder.  You can shorten the file name and try again, or try a location with a shorter path. "I then gives me choices to skip or cancel.  What happens to files that are ignored?  Are they deleted?  I don't want to lose all the data, but there are more 2 000 files with this problem, so passing by and rename each one really isn't a viable solution.  I don't really understand how the file names were originally created/saved about a problem that is only now that I want to move them.  The disc source and destination are NTFS.  Is there a solution for this?  It is imperative that no data is lost.  Thanks for any help you can offer.

  On Wednesday, 10 April 2013, 12:16:23 + 0000, MADinIowa wrote:

  I move the files from internal hard drive to external hard drive using cut and paste.  I get a message "the file name would be too long for the destination folder.  You can shorten the file name and try again, or try a location with a shorter path. "I then gives me choices to skip or cancel.  What happens to files that are ignored?  Are they deleted?

  N ° to check that what I say is correct, create a new folder
  for the purposes of the trial and to make a copy of some files. To ensure that
  one of them has a long name (rename if necessary), and then try to copy
  These files on the external drive. When you get the message, choose
  'jump' and see what happens.

• Try to copy a folder with subfolders, some don't copy, get the message that the folder names are too long under Windows 7

  Hi, when you try to copy a folder with lots of subfolders, some files don't copy.  I get a message that the folder names are too long, and the only option is to ignore these files.  Anyone know the maximum folder (and also) name length that will copy windows 7?

  Thank you

  Steve M

  Hello
   
   
  a. What are the data you're trying to move?
  b. what operating system (for example Windows files) files?
  c. What is the method that you use to copy data?
   
   
  Windows 7 supports filename up to 260 characters. I would ask you to decrease the characters in the file name and then try to copy the files.
  
  Let us, run disk checking hard disk utility and then check.
  Here's how:
  1. open the computer by clicking the Start button, click computer.
  2. click on the drive you want to check, and then click Properties.
  3. click on the Tools tab and then, under check for errors, click Find now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  To automatically repair problems with files and folders that the scan detects, select automatically fix file system errors. Otherwise, the disk check will be a problem, but not to fix them.
  To perform a thorough check, select search and attempt to recover bad sectors. This analysis tries to find and repair physical errors on the disk itself, and it may take much longer to complete.
  To check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.
  4. click on start.
   
   
  Depending on the size of your drive, it may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.
   
  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Explorer.exe uses too much CPU

  My explorer.exe uses too much CPU (almost 100%). Then an error message appears-

  Microsoft Visual C++ Runtime Library

  This application has requested the execution to terminate in an unusual way.

  For more information, contact the application support team.
  If I click on OK, or simply close the dialog box explorer.exe ends and restarts. After awhile, it starts to use full CPU again, and the same dialog box appears again. I have installed new software and tried almost every other way, this forum as restart explorer.exe etc...
  Help, please

  Hello Rahul,

  Thanks for posting your question in the Microsoft Community forum.

  I understand that explorer.exe is using too many CPU resources. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed?

  3. don't you make changes to the computer before the show?

  To resolve this issue, let us try these methods:

  Method 1.

  Advanced startup options (including safe mode): http://windows.microsoft.com/en-US/windows7/Advanced-startup-options-including-safe-mode

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 2.

  You can run the system maintenance Troubleshooter and check.

  Open the troubleshooting of System Maintenance Utility: http://windows.microsoft.com/en-us/windows7/open-the-system-maintenance-troubleshooter

  See these articles for more information.

  Ways to improve your computer's performance: http://windows.microsoft.com/en-us/windows7/ways-to-improve-your-computers-performance

  Optimize Windows 7 for better performance: http://windows.microsoft.com/en-us/windows7/optimize-windows-7-for-better-performance

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Important: while performing the check disk on the hard disk, if bad sectors can be found, then check disk will try to repair this sector. All the data available in this area may be lost.

  For any question related to Windows, please do not hesitate to contact us and we will be happy to help you.

• Svchost.exe file LocalSystemNetworkRestricted using too much RAM

  The file svchost.exe (LocalSystemNetworkRestricted) uses too much RAM, almost 1/2 of it.  There are also several svchost.exe files (no limit) and the indexer uses a lot of RAM too. I have already associated the indexer return. I suspect that it is the cause of my favorite right-click with windows Explorer.  I have 4 GB of RAM, small basic programs, file clean constantly and the computer is still slow.  How can I fix it?  Test/scan etc. ?  HELP.............................

  2computercrazy

  Hello

  Follow the steps below and check if that helps.

  Method: Scan the System File Checker.

  http://support.Microsoft.com/kb/929833

  Method 2: I suggest you to check the boot issue.

  1. click on start, type msconfig in the search box and press ENTER.
  The user account control permission.
  If you are prompted for an administrator password or confirmation, type
  password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load starting points.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.
   
  If the problem is resolved, make sure what third-party program is at the origin of the problem, referring to the link given below:
  http://support.Microsoft.com/kb/929135
   
  Reset the computer to start as usual.
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.
  When you are prompted to restart the computer, click on restart.

  Method 3:Follow the steps below to solve the problem

   1. click on start-> in start search, type "services.msc" (without the quotation marks) in the Open box and click OK.
  2. double-click on the service "Windows Update".
  3. click on the tab to open a session, please make sure that the option "Local System account" is selected and the option "Allow service to interact with desktop" is unchecked.

  4. check if this function has been activated on the hardware profile listed. If this isn't the case, please click the Enable button to enable it.
  5. click on the "Général" tab Make sure the "Startup Type" is "automatic". Then please click the button "Start" under "Status of Service" to start the service.
  6. repeat the above steps with the other service: (BITS) Background Intelligent Transfer Service

  Method 4: I suggest that you want to run a virus scan on your computer.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  I suggest you to provide us with the information from the event log.

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

• My Safari is using too much memory

  I use Safari 9.1.1 on my iMac (OS X 10.9.5)...) Last week, Safari uses too much memory causing my computer to slow down and own memory has automatically free up space.  I use the same sites in multiple windows.  But it will bring my RAM available to a dangerous level of 2 MB...

  Memory will make things worse. The amount of RAM is installed?

• Firefox using too much memory

  Hello

  I had this problem a weakness there, I made any suggestion that this link said and it did not help:

  https://support.mozilla.org/ar/kb/firefox-uses-too-much-memory-ram#w_disabling-memory-consuming-plugins
  

  I have no many taps oppened taps only 47.
  My firefox now usiing 2 GB ram, can someone help me how to fix it?
  Thank you

  I tried 'back of ram' add and activate acceleration on my GPU and it worked, it did not use more than 200 MB with the same number of notches before

  Thank you very much

• FF using too much RAM and slow down

  FF uses too much RAM
  After I started FF, like 5 minutes later, use as a 1 GB of ram, and if I don't restart it, I push up to 3 GB ~ 4 GB of RAM used

  the article above has not helped
  updated to version beta and resolved

• AVG says using too much memory because multiple firefox is open, but I only see one.

  AVG regularly analyzes in the background. Lately he has demonstrated a popup window that says multiple applications of Firefox are running and using too much memory, so I should close some. But I can only see 1. Tried CTRL ALT DEL to see if I could find the answer, but only showed 1 firefox, and that he used more than 28 000. So I think that AVG is correct, but does not know how to see what who or where they are. They DO NOT display in the lower menu on the main screen, so I guess they are in the background. Do not have the virus, and Firefox, regularly updates itself. What should I do to fix?

  Hi cmich80220.
  It is true, that you should only be able to run only one instance of Firefox at the same time. I searched but could not find someone else with a similar problem. If the problem comes back to Firefox running slowly, you can consult this article for troubleshooting:

  [Firefox is slow]]

  Hope that helps.

• I can't watch Flash videos because Firefox uses too much CPU.

  Firefox has become untenable because it uses too much CPU and disrupts the Flash videos.

  I tried to disable or change the values of the plugins. Install older versions. Nothing helps. It just sucks. Makes me want to get out the lungs of someone.

  Updated to Firefox 8.0.1 - http://www.mozilla.com/en-US/firefox/

• How is Samsung TV, possible to permanently hide the message that explains how to use Air play via Apple TV?

  How is Samsung TV, possible to permanently hide the message that explains how to use Air play via Apple TV?

  Apple Tv has the conference room mode turned on causing the message to appear.  Turn it off:

  On restrictions of airtime and the mode of the conference room on your Apple TV - Apple Support

• When I click on an e-mail on a web page, I want that it open / compose new messages in GMAIL (currently it uses Windows Live Mail). How do I?

  When I click on an e-mail on a web page, I want that it open / compose new messages in GMAIL (currently it uses Windows Live Mail). How do I?

  See this:
  
  http://support.Mozilla.com/en-us/KB/changing+the+e-mail+program+used+by+Firefox

• iCloud by using too much bandwidth

  Have had slow internet speeds. Access provider has been here many times and came down to say that my iCloud uses too much bandwidth. Is there a way to schedule his only to run overnight or turn it off - my net is so slow - like 2-3 megabytes when it is supposed to be 10

  Your ISP you gives a load of BS, if necessary, change ISPS.