Message cannot be sent http server eval = 2000 error code

Similar Questions

• Media Player cannot connect to the server - Original COOD2EE7 error code

  Tried media player - tools - options-network. Cannot configure the Protocol / the proxy settings. Streaming proxy settings area is empty.

  Hello Adelek,

  Thank you for posting.  It seems that you may have a firewall problem.  I that you would suggest to check your firewall settings to see if it's to allow access of media player.  I've also included some basic information about this error.

  Please let me know if this helps you.

  You got the C00D1198 error message when you use Windows Media Player. The following information can help you resolve the problem.

  Unable to connect to the server

  Windows Media Player cannot connect to the server that hosts the content you want to listen to. You may encounter this error message for the following reasons:

  • The name of the server that hosts the content is not valid. If you typed an address Uniform Resource Locator (URL) in the open URL dialog box, verify that the file name is spelled correctly and that the path to the file is correct, and then try again. If you clicked a link on a Web page, the link isn't valid.

  • The server is not available (for example, the server is busy or not online). Try again later.

  • For Windows Media Player proxy server settings are not configured correctly. Verify that your proxy server settings are correct.

    To check your proxy server settings

    1. Click the arrow below the now playing tab, and then click More Options.

    2. Click the network tab.

    3. Check your settings in the Streaming proxy settings area.

       Note

       • If you don't know what your proxy server settings should be, on the network tab, select a Protocol, click on configure, then select Autodetect proxy settings or use the the proxy settings of the browser (available for HTTP protocol only).

  Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Firewall Windows cannot change some of your settings. Error code: 0x800704c

  I get this message when you try to turn on my firewall. "windows firewall cannot change some of your settings." "Error code: 0x800704c.

  Hello
  Follow these instructions to fix the Windows Firewall:
  Download and install repair Windows: 
  http://www.TechSpot.com/downloads/5314-tweaking-Windows-repair.html
  When the repair of Windows opens, click on the tab to start repairs, click Start. Unselect all the boxes except for the following:
  -Reset the registry permissions
  -Reset the permissions of files
  -WMI repair
  -Repair Windows Firewall
  Then click Start. Once it is finished, restart your computer. Let me know if this helps you.
  Brian

• Firewall problem: "firewall Windows cannot change some of your settings. Error code 0 x 80070424.

  My firewall doesn't let me turn it on. McAfee says that my computer is in danger because my firewall is not on and tried to turn back on. It gives me an error code and says ' firewall Windows cannot change some of your settings. Error code 0 x 80070424.

  Because you pay McAfee protection antimalware we assume that asked for the help of McAfee Support? http://service.McAfee.com/

  Try this: http://support.microsoft.com/mats/windows_firewall_diagnostic/

• I receive emails, but cannot send anything. I get this error code, 0x8CCC003

  I receive emails, but cannot send anything. I get this error code, 0x8CCC003.  I called embarq, but they do not know how to solve the problem. Any suggestions for some who is NOT computer savvy?

  Ok. You will need to ask the experts of WLMail. Here, few people use this program.

  Windows Live Mail Forum
  http://windowslivehelp.com/forums.aspx?ProductID=15

• "Windows Firewall cannot change some of your settings. Error code 0 x 80070424 ' how to fix this?

  I get this error: "firewall Windows cannot change some of your settings. Error code 0 x 80070424"when I try to turn on the Windows Firewall (Windows 7).  I am also unable to start my computer in safe mode.  My computer has been infected by the virus 'Win 7 Security 2012', which is what caused this damage to my system.  The virus also seems to have removed all the system restore points before the infection!  I believe that I have the virus completely deleted.  I used Malwarebytes Anti-Malware, Spybot Search & Destroy, Ad-Aware, Kapersky Virus Removal Tool, antivirus Ati Avira (anti-virus program I was running when my computer has been infected by the virus) & Microsoft Security Essentials.  I ran the Scan SFC, a tool for emergency response Microsoft Support, Microsoft FixIt, ComboFix, & Tweaking.com Windows Repair all-in-One.  Repair Windows Tweaking.com seems to be turned Action Center back, where I now get a message that: "Windows Defender is turned off" & it does not seem to recognize MSE as my anti-virus program.  I need to know how to get Windows Firewall works again & get Action Center working properly again.  My computer has a partition with my Windows Recovery on it, but since I can't start in safe mode, I can not also start the restore partition to do a "repair" install, or even restore to factory settings!  Can anyone help?

  Also, when I use a search engine on internet, I get re-directed to a site that has absolutely NOTHING to do with the result of the research, and I click on... I am not that so that is proof that the virus is not COMPLETELY gone or not.

  Hello

  Make sure that the PC is clean (free from zero rootkit to access before you try this corrected)

  This problem of firewall is commonly found on vista and windows 7 (64 BIT OS)

  Download the two files from the registry

  Windows Firewall - MpsSvc

  BFE - base filtering engine

  Run them and click YES when you receive a UAC prompt

  Restart your PC

  Press Windows key + R and type

  regedit , and then click ok

  Reach

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\BFE

  Right click on it -permissions

  Click ADD and type

  Everyone, and then click ok

  Now click on all

  Below, you have the permission for users

  Select full control, and then click ok

  Press Windows key + R and type

  services.msc , and then click ok

  Start the service database and then filtering engine service windows firewall

  If you still get this error

  Windows could not start the Windows Firewall on the local computer. See the event log, if services not windows contact from the seller. Error code 5.

  Download and launch this key

  Shared access

  Click YES when you receive a UAC prompt

  Reach

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\SharedAccess

  Right-click on -permissions

  Click Add and type

  Select full control and everyone

  You should be able to start the firewall now

  You can also Miss defender of windows security center, BITS and windows update services

  Download

  Security service center - wscsvc

  Windows Defender -windefend

  BITS - BITS

  Updated Windows - wuauserv

  Run them and click YES when you receive a quick restart, UAC the PC
  

  
  

  Good luck

  * Edit *.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk...

• Home surveillance camera kit, that will not work on Windows 7 OS. I have the following message: "DVR installation may not complete. Ox00000222 error code.

  I bought a home surveillance camera kit, that will not work on Windows 7 OS.

  I have the following message: "DVR installation may not complete. Ox00000222 error code.
  I really need to get this working on my computer. Can anyone help please?

  Contact the manufacturer of the camera to get their installed software.

• Firewall Windows cannot change some of your settings. Error code 0 x 80070424

  I use 8 (64-bit) windows, try to turn on "Windows Firewall".

  Get this error "firewall Windows cannot change some of your settings. Error code 0 x 80070424.

  I tried to locate the "Windows Firewall" services in the service (in Services.msc) database, but this service is not listed. Help, please

  Thanks Robear,

  Today, I just made "Reset PC" to make it back to my factory setting (even if I lost all my data, but I've got to the top of it). Then, I used "Norton Removal Tool" to remove Norton who was there in orginal factory setting.

  Now, I tried to run "Windows Defender" & "Windows Firewall" both are running without any problem.

  Thank you much for the help.

  Vikas

• Cannot send faxes. Message: "the message cannot be sent. Media is write protected"OS Win7 64

  I had this set up fax and work before, but had to reload windows and it has not worked since. The fax account appear to be installed and shows as connected. When I try to send a fax, the error message 'Write-protected media' appears.

  I have the function enabled in "Windows features" fax and the modem works properly according to the "query" in the modem properties.

  To install the fax account I had to check send later because when 'connect to a modem' has been verified an error message pops up telling me that there is a modem installed.

  If you check receive a fax, the modem starts and a fax tone and a tone can be heard but still sending does not.

  I had this set up fax and work before, but had to reload windows and it has not worked since. The fax account appear to be installed and shows as connected. When I try to send a fax, the error message 'Write-protected media' appears.

  I have the function enabled in "Windows features" fax and the modem works properly according to the "query" in the modem properties.

  To install the fax account I had to check send later because when 'connect to a modem' has been verified an error message pops up telling me that there is a modem installed.

  If you check receive a fax, the modem starts and a fax tone and a tone can be heard but still sending does not.

  This will help you... go register around...

  http://www.winvistatips.com/fax-error-message-could-not-sent-media-write-protected-t158670.html
  then restart your pc and go ahead with the next steps

  Step 1: Restart the fax service
  a. Click Start, type services.msc and press to enter.
  b. in the list of services, right-click on the fax, and then click Stop.
  c. double-click Fax, change the startup type to automatic and click on the Start button.
  d. click ok to apply the changes.
  e. check if the problem persists.

   
  If the problem persists, disable and enable the Windows Fax and Scan
  Step 2: Disable Windows Fax and Scan
  a. Click Start, type optionalfeatures and press to enter.
  b. in the list of objects, expand "Print Services" and Document
  c. uncheck "Windows Fax and Scan"
  d. click ok and restart the computer for the changes to take effect.
   
  Step 3: Activate Windows Fax and Scan
  a. Click Start, type optionalfeatures and press to enter.
  b. in the list of objects, expand "Print Services" and Document
  c. place a checkmark on "Windows Fax and Scan."
  d. click ok and restart the computer for the changes to take effect.
   

• Internet page cannot be displayed/cannot can not find server or DNS error

  I have a new hard drive and cannot connect to the Internet (page cannot be displayed error / cannot find server or DNS error).  Operating system XP and Internet Explorer v6.  I tried without success to create a new network connection.  The only network connection listed is a 1394 connection.  Under Options, LAN settings is set to automatic detection. The firewall is disabled.

  Hello Barbrab

  You must install the network drivers for this system that you did a clean install of windows. After installing the driver, find the network connection. Let me know if it helps.

• Sims3-message-cannot start the game 0x039e8474 service initialization error

  someone recently put the sims 3 on my computer it's a game hacked, it worked fine on his computer, but it is not functional on mine me repeat it, cannot start the game 0x039e8474 service initialization error

  [Original title: program compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs]

  Hello

  Probably that's due to the custom being contained in the game which is not compatible with your current version. It can also occur when your cache has not been cleared of a previous installation or game save and damaged.

  I suggest you follow the steps mentioned in this article about this.

  http://Forum.thesims3.com/JForum/posts/list/561267.page

  Note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  If the problem persists, you can post the question in the Sims3 community forums.

  http://www.thesims3.com/community
   
   
  Hope this information helps. Response with status so that we can help you.

• Unable to connect to the server... error code 0 x 80070043

  Hey you all.

  We have a server on the network that contains the software and the data we use in a client/server parameter. To install the client side, we do the following from the workstation:

  START / RUN / \\10.20.0.77 which opens a window on the software on this server. Run us Setup.exe and everything is good on the client computer after installation is completed successfully.

  I have not had any problems to access to the / mapping for this server to Windows XP and Windows Vista Business 32 b, but on a Windows Vista Business 64-b system, I am no longer able to connect to the server via the net use or net shareor the map network drive feature. The following error occurs:

  "10.20.0.77" is not set up to establish a connection on port "File and printer sharing (SMB)" with this computer.

  It is possible to access this server by using a web browser, but the software install that way. The error code associated with the start was 0 x 80070043.

  I say "originally" because after researching on the net, a single thread suggested changing the NetBIOS default value " Enabled" for this network card Protocol. After you make this change, the error code as amended in 0 x 80070035, but the description remained the same as those listed above.

  Another thread said the server was to port 139 for mapping research, but Vista has been maps on port 445. Since I can't access 10.20.0.77 server to carry out changes, its installation rinetd solution and implement a file etc/rinetd.cfg to it remapped 445 to 139 is not possible, especially since our network is ENORMOUS and it could affect workstations running without any problem.

  Anyone here heard, or familiar with this type of problem for helping to find a solution?

  Thank you muchly. :)

  Cole

  A teacher affects eternity: he can never tell where its influnce judgments.

  Hello Aj. Cole,.

  I have a couple of thoughts for you, but since you're talking about server and workstation, I guess that you are in a domain environment. If so, then your problem of not being able to connect to a server would be better served in a forum that would be dealing with server and domain issues.

  However, the error message, 0 x 80070043 - the network name cannot be found

  Ensure that you have sufficient access to SMB file transfers (this requires ports NetBIOS open because SMBS use the NetBIOS protocol to transfer data).

  You can also check to see if the Vista workstation has a gigabit card. If so, look for the following local strategy.

  Enable the policy local to always wait for the network at the start of the computer and logon . To do this, follow these steps:

  1. Start the Group Policy Editor (gpedit.msc).
  2. Expand Local Computer Policy\Computer Configuration\Administrative Templates\System\logon.
  3. In the results pane, click always wait for the network when starting the computer and logon and then click Properties.
  4. On the setting tab, click active, and then click OK.
  5. Restart the workstation.

  You don't specify what your domain environment, so I don't know which forum send you as Windows 2003 SBS etc. Use the following link to find a good forum for you.

  http://social.technet.Microsoft.com/forums/en-us/categories/

  Hope this helps

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot download the updates of Windows. Error code 80070424 "unknown error."

  Help, please! I just learned that Windows cannot check the updates.  "Error code 80070424 unknown error" appears when I try to check updates. In 'services', it is set to 'start '... What can I do?

  Error message when you use Microsoft Update or Windows Update Web sites to install updates: 0 x 80070424
  http://support.Microsoft.com/kb/968002/

  You can not turn on automatic updates on a Windows XP Service Pack 2 computer
  http://support.Microsoft.com/kb/916261
  The Automatic Updates feature is disabled in the Security Center. In addition, you cannot turn on the Automatic Updates feature.
  When you try to install updates on the Microsoft Windows Update Web site, you may receive an error message similar to the following:
  0 x 80070424

  Or
  Click Start, select run, type: regsvr32 c:\windows\system32\wuaueng.dll (works for Vista)
  Press Ok TaurArian [MVP] 2005-2010-implementation to date of Services

• My screen often blue server with 0x000000F4 error code.

  I just bought HP Server, I install windows 2008 R2 STD. Since I installed the Server Windows 2008 R2 STD, obtained server often hang or blue screen 0x000000F4 error code. I searched on google about this error code and found this site http://support.microsoft.com/kb/977178, I download the patch and when I tried to install it, a message appeared told "update is not applicable to your computer.

  in this server, I also already installed Microsoft SQL 2008 and VMware workstation 6.5 (VMware already uninstalled).

  Do you have advice on my problem?

  THX

  Samuel

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 Server forum.
   
  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Cannot perform the update Windows with the error code A 8024, 000

  Original title: error code 8024A 000, does that mean?

  I had to do a clean reintall WIndows Vista and when I tried to update, I received error code 8024A 000, does that mean? How can I fix it?

  Hi Anthony,

  1 are you facing this problem with any particular Windows update?

  2. What are the troubleshooting steps you have tried?

  Please follow the links and check with the question:

  Method 1:

  How to reset the Windows Update components? :

  http://support.Microsoft.com/kb/971058

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

   

   

  Method 2:

   

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2:

  http://support.Microsoft.com/kb/2509997

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

   

  I hope this helps.