Message error Photomerge & several tools (i.e. the count tool) shaded out in CS6

Similar Questions

• CS6 Photoshop Camera Raw 7.1 Installation failed. Error code: U44M2P7 - try to get the Camera Raw Filter for Photoshop CS6

  CS6 Photoshop Camera Raw 7.1 Installation failed. Error code: U44M2P7 - try to get the Camera Raw Filter for Photoshop CS6

  U44... Update error http://forums.adobe.com/thread/1289956 can help

  Try to install your updates manually

  Beginning of the updates here and product selection, read to see if you need to install updates in the order of the numbers, or if updates are cumulative for the product http://www.adobe.com/downloads/updates/

• When I run the program I get a message "error loading C:\windows\dhax40.dll the specified module is not found.

  I have Windows XP service pack 3.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.

  A Google search on the name of the file means no "hits" which makes things even more suspicious.

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information
  .  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it
  .  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.

• Message error "access to this place or the content is limited.

  Hi, I get this message:

  "Access to this site or the content is limited. If you think that there is an error, contact your administrator or the person who directs you here. »

  when I try to access a link in the e-mail to "community-admin [[email protected]]"

  Subject: [stock items (APC/PLM/PIM) - EBS (MOSC)] - inventory on-site validations [1ky9kt-120u0-7knu1]

  Link: https://community.oracle.com/message/12721321?et=watches.email.thread#12721321

  It worked fine yesterday, but today it does not work. I can always connect on MOS but when I use the search tool it and include the community, I get the same message for the community tab.

  Can someone direct me please the people correct to speak with for that this is resolved.

  Thank you
  Sean

  This problem should have been solved now. We did hit a permissions problem that has now been corrected.

  Mike

• Message error "another sellers application is controlling the wireless adapter.

  Hello
  I have a satellite A100 309 and I am trying to configure wireless (intel pro wireless 3945 ABG) card using the intel standard configuration tool (windows one does not support it). I have the following error message «another sellers application is controlling the wireless adapter» I guess that there is a conflict with the windows WLAN utility but I don't know how to solve this problem.
  I tried to uninstall and reinstall the driver but no way...
  Someone at - it an idea?
  Thank you very much.
  JF

  I put t know how it works on your device, but I assume that your camera it is preinstalled tool Intel PROSet WLAN. Using this application you can configure WLAN connectivity. Windows operating system also has WLAN configuration settings.

  The fact is that the two who cannot be activated at the same time. If you use Windows settings, you must disable the Intel PROSet. Remember in front of Windows settings, the box is removed.

• Using Autodesk Architecture 3.3 and opening a working file, I get the error message error "there was a problem sending the command to the program".

  When using Autodesk Architecture 3.3 and opening a working file, I get the error error message "there was a problem sending the command to the program". What does that mean? At the same time (or nearly the same time) trying to create a pdf from a drawing file is suspended the program autodesk. These two worked before.

  Hello

  The question you posted would be better suited to the Forums from Autodesk. I suggest you post here for better support.

  Here is a link:

  http://forums.Autodesk.com/

• Errors with several buttons pointing to the same frame on the timeline. Animate CC

  I have a project where I'm using a function text button to reach a specific image and stop to view, however, if I take a contour of the object and put it on a symbol, I can't have two different objects pointing to the same frame, it generates the error because the frame can be called only by a single button/symbol.

  My solution is to reproduce each of the frames and each have addressed as a new image with the same content.

  Is there a better way to do this?  I'm not fluent Actionscript 3.

  Thank you

  Rick

  You can't have double function names and using the same name/instance for different objects reference is problematic, but you pouvez have different objects "..." pointing at the same time.

  Btn1.addEventListener (MouseEvent.Click, F1);

  btn2.addEventListener (MouseEvent.Click, F1);

  btn3.addEventListener (MouseEvent.Click, F2);

  Function f1(e:MouseEvent):void {}

  this.gotoAndStop (32);

  }

  function f2(e:MouseEvent):void {}

  this.gotoAndStop (32);

  }

• 6.3 to 6.4 Mac Lightroom update: message error U44M1P7 and LR6.0 on the Mac!

  Some help, advise, plan sought to update LR or 6.3 or 6.4

  Hi John,.

  Please check the link, it may be useful!

  https://helpx.Adobe.com/Creative-Suite/KB/error-u44m1p7-installing-updates-CCM.html

  You may also need this as its LR 6

  https://helpx.Adobe.com/Creative-Suite/KB/unable-apply-Extension-Manager-Update.html

  Let us know if it helps

  See you soon!

• Cannot run Aerotow, message error "access denied, needs access to the FSX.cfg file in My Documents and Settings folder'.

  Original title: I need assistance with My Documents and Settings folder

  I have Windows XP, Norton Internet security.

  OK, so I have FSX. I'm having a little program called "Aerotow. To run, you must Access the FSX.cfg file in My Documents and Settings folder.
  But access to this file is denied.
  The most funny thing is - I can access the folder without problem. Open it and sail away. But my system seems to have blocked Aerotow.exe and configure.exe to access this folder. It's VERY frustrating. How can I access this folder? Why the program is blocked?
  Thank you.

  Hello

  I suggest you to contact the developer of the application for assistance.

• I have a mac using OS x 10.6.8 - I've set up an adobe ID and now get a message error everytime I try to download the trial version.  Anyone know what I need to do?

  having trouble downloading the trial of photoshop.  Someone knows a way to foolproof to do?

  OS x 10.6.8 does not satisfy the requirements of system of Photoshop CC or CC 2014. 10.7 is the minimum.

  System requirements | Creative cloud

• media center trying too watch the TV, but message says no tuner available to satisfy the request cannot figure out how fix tuner worked very well

  Media Center does not allow me to watch tv message keeps saying no tuner available to satisfy your request, that I have set up signal again that no change was working fine now not at all

  Hi peace1900,

  • You did it any software or changes to the material on the computer recently?
  • When it was working fine the last time?

  Method 1.
  If your computer has installed TV tuner hardware, follow these steps to resolve the error messages so Media Center can use the tuner driver. After each step, Open Media Center and try to view or to set up live TV. Continue following the steps until the error no longer appears and you can watch TV:
  1. If you use a cable of the card and the computer resumes from a standby or standby mode, wait at least 20 seconds before starting any software that uses the tuner, including Windows Media Center.
  2. restart the computer to Resync to Media Center driver:
  a. Click Start.
  b. click on the arrow in the toolbar and then click on restart.
  c. wait that Windows and all startup items load before you open Windows Media Center.
  3. If you have added a new tuner card, make sure that the tuner card is compatible with Windows 7 Premium or Ultimate. Search for certified for Windows 7 on the product packaging or consult the following website to check the compatibility:
  Microsoft support: Windows 7 Hardware Compatibility List (in English)
  4. change the Windows Media Center Receiver Service specific to a Local System account account name:
  a. click Start , and then type Administrative Tools in the start search box. Click on administrative tools in the search results.
  b. double-click on Services .
  c. scroll to the bottom of the list of Services and find Windows Media Center Receiver Service . You may need to expand the name column by dragging the right side of the column heading.
  d. right-click on Windows Media Center Receiver Service and then click Properties .
  e. click the Connection tab , and then select the Local System account .
  f. click apply and then click OK in the message Services.
  g. restart the computer.
  h. click OK again and restart the computer.

  For more information, see the article below:
  http://support.Microsoft.com/kb/929453

  Method 2: Reinstall the drivers for the tuner:
  1. If you have added a TV tuner card separately, install the drivers that came with the tuner.
  2. If your computer came with Windows 7 Premium and a tuner, reinstall the drivers for the tuner. Click Start, all programs, Recovery Manager, and then click Recovery Manager again.
  If you are prompted, click Yes to continue.
  3. in the Recovery Manager screen, click the hardware driver reinstallation and follow the on-screen instructions to restore the tuner driver.

  Method 3: Install the driver from the manufacturer of the tuner tuner updates:
  If you have added a TV tuner card separately, go to the manufacturer's Web site and install the driver for the tuner updates.

  What should I know before adding TV tuners to use with Windows Media Center?
  http://windowshelp.Microsoft.com/Windows/en-us/help/cf0b2d02-c3df-4369-8fed-ce71398cd11f1033.mspx
   
  Solve problems with watching TV on your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/d4dce2d3-0388-43b1-8880-7d6823d0eb9f1033.mspx#EFEAC
   
  Get help for your TV tuner card
  http://windowshelp.Microsoft.com/Windows/en-us/help/d7ef383d-3342-4C8B-b1ce-5ca64891bc381033.mspx
   
  Method 4: use the system restore to the system at a time where the error has not opened. If you are not familiar with the Microsoft System Restore function,
   
  For more information about system restore, see the following links:
  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions
   
  If the system restore does not help to solve the problem, try to uninstall and reinstall the Windows Media Center.
  Method 5.
  Uninstall and reinstall the Windows Media Center:
  Step 1.
  Uninstalling in Windows Media Center:
  1. go to start and in the search type "Turn Windows willing or not.
  2. click on "Turn Windows features on or off".
  2. go to media features and uncheck the brand in the face of Windows Media Center.
  4 restart the computer
  Step 2.
  Reinstall the Windows Media Center:
  1. go to start and in the search type "Turn Windows willing or not.
  2. click on "Turn Windows features on or off".
  3. find the multimedia functions and place a check mark in front of Windows Media Center.
  4 restart the computer.
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-features-on-or-off

  It will be useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Gettling linker error: LNK2001 while porting code from the plugin plugin CC InDesign InDesign CS6

  Hello

  I am working on porting our plugin code existing InDesign CS6 to support InDesign CC plugin (client plugin on Windows platform)

  The code of the plugin gets compiled successfully after making changes to the code (API) neccessory but now gettling suite of the linker error

  StackListBoxTVWidgetMgr.obj: error LNK2001: unresolved external symbol "public __declspec (dllimport): __thiscall long NodeID::GetNodeType (void) const"(__imp_?» GetNodeType@NodeID@@QBEJXZ)

  IBClientPluginDialogController.obj: error LNK2001: unresolved external symbol "public: virtual void DVHostedWidgetEH::AddRef (void) const '(?) __thiscall. AddRef@DVHostedWidgetEH@@UBEXXZ)

  I checked all the configurations setting, all paths include the headers and static libraries point to InDesign CC SDK.

  Note: Get these errors from the linker in all UI component class objects where the following interfaces are inherited:

  CTreeViewWidgetMgr

  CIDEditBoxEventHandler

  etc.

  Build environment:  Windows 7 ultimate + Visual Studio 2010 SP1 + InDesign products SDK Build 244 CC

  Try to including DV_WidgetBin.lib.

• How can I turn off the check-in / check-out in CS6?

  I'm unable to remove the check mark failed features for HTML documents associated with a site that has already helped Contribute users access to the same documents. The download or the 'Upgrade' button shows a progress bar that moves slowly through a series of guests who say that the file is currently checked, collection of information on the design, etc.

  I read articles to support that say to remove the. LCK files from the remote server, what I've done, but the process remains the same. I also disabled the option activate contribute accessibility checkbox and bring together the design notes box under the advanced settings configuration window.

  Can anyone help me out in addition Contribute settings or access your room / check the parameters that have been previously activated?

  Thanks in advance to anyone who can help me.

  Todd

  Have you disabled file check-out of the ADVANCED on remote server configuration options?

  

• Installed WriteItNow 3 software and now when I try to uninstall it, I get the error message: error in LaunchAnywhere.

  I installed the software WriteItNow 3 and now when I try to uninstall it, I get the error message: error in LaunchAnywhere. Cannot launch the executable file. Class not found: com, zerog, lax, LAX. How can I fix this so that I can uninstall the software?

  original title: error LaunchAnywhere

  You can give a whirl to this program because it is good enough to get rid of stubborn programs.

  http://www.revouninstaller.com/

  I hope this helps.

• Error loading C:\Windows\sbdbrbs.dll - the specified module could not be found.

  Original title: sbdbrbs

  When my computer starts up it gives the following error message: error loading C:\Windows\sbdbrbs.dll - the specified module could not be found.

  Can anyone offer any assistance?  Could not find this particular dll through search engines file.

  Thank you

  Looking for errors like this by doing a search on Google for the name of the file.  Usually, they turn up without success.

  When a search in no hits or suspicious hits result, the answer is usually that the file in question is linked to the malicious software and your anti-malware application has deleted or quarantined file, but left to the Windows registry entry that tries to start the malicious software when you start your computer.

  First of all, download, install, update and run full scans with two of these free analytical tools:

  MalwareBytes AntiMalware
  SUPERAntiSpyware

  Do not run the scans at the same time.  They can take some time, so start an and then go for a non computer chore for awhile.

  If the scans does not solve the problem (and they can't, because the actual malware file has already been processed), then download and run Autoruns.  Click on the "Connection" tab and look in the column 'Image path' for the dll named in your error message.  If it is not displayed in the connection tab, click the "all" tab and use the file > search tool.  A characteristic of the search of Autoruns tool is that you must move the selection under the element line "found" before you "Find Next."

  Once you find the line with the file in question, either "delete" or (if you want to be safer) uncheck the box.  The latter prevents the line running, but you can reactivate it later by removing the check mark.