Message Windows to restore in the minimized state bar panel.

Similar Questions

• If I click once on an e-mail in the message window while I closed the preview window, I opened that makes e-mail?

  If I click once on an e-mail in the message window while I closed the preview window, I opened that makes e-mail? I worry because I don't want to open a message that my bad-ware download on my computer. If the preview window is closed, I noticed that the number of e-mails read does not change when I click once on e-mail. Can I assume that unread means that it has not been opened.

  Read the answer! Your question is answered there.

  Read / unread is purely an indicator. It has no real meaning. If you go into the menu (alt + T) tools > options > advanced > reading and display, you can change when a mail is marked as read in immediately to 10 seconds (this is what outlook express used) up to 1000 seconds.

  The software marked the email read is that this logic can go. It's always "BOLD", the software did not mark the message read.

  You open the mail? It is an unquantifiable statement.

  In the context of Thunderbird an individual mail is not a discrete element that is stored. It is a part of your data for mail/News. So try to equate open to action just does not fit.

  Thunderbird received mail as a series of lines. He collected in an email that he stores in a file with all your other emails for this folder. You open the file in that the mail is stored? Totally irrelevant Thunderbird opens to get mail every time that mail is added to the folder or to view a mail in this folder.

  Each time a letter is displayed (any mail) the file all your emails for this folder are saved in the opening and reading.

  If clicking on the mail list 'open' the file. Probably not, it was probably already open. The file is opened, read, written to and updated probably half a dozen times since Thunderbird started so if you click on the mail to see won't change anything good at all. If the e-mail file has been closed it will be open to view the contents of the mail, but he is perhaps already open.

  The key is that you try to apply assumptions to mail that simply do not apply. That's why I sound as if I'm going in circles.

  You also may ask, when I fill the kerosene tank my electric light.

  • The software mark mail as read when you say
  • It opens files underlying storage constantly. Clicking on an entry may or may not cause the opening of the file.
  • Your mail is not in a file on its own, it is in a file that contains all the messages in the folder and the mail deleted until the folder is compacted.

• Error message "WIndows cannot currently check the updates, because the service is not running, you may need to restart your computer.

  Error message "WIndows cannot currently check the updates, because the service is not running, you may need to restart your computer.

  I am currently using windows 32 bit vist

  I rebooted, I changed the settings, I don't have a file called window update service in the service section to stop and start, I tried the fix programs, I'm out of ideas and I need help!

  Suggestions?

  Hello

  1. have you made changes on the computer before this problem?

  2. which antivirus app do you use?

  I suggest you try these methods and check.

  Method 1:

  Anti-virus software may conflict with Windows Update. You can temporary disable them and check the issue.

  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 3: If the methods above do not help, I suggest you delete the edb.log file and check if that helps.

  Follow these steps:

  a. click the Start button, click computer.

  b. now, go to this site: C:\windows\softwaredistribution\datastore\logs\edb.log
  Where 'C' is the drive of operating system
  c. delete the log file, and then restart the computer and check the issue.

• Can I use my network wireless at home I don't have a problem, but when I use it at work I get the message window explorer cannot display the webpage

  Please help I can use my network wireless at home I don't have a problem, but when I use it at work I get the message window explorer cannot display the webpage and the worl tour plan has a red cross on it can you help me solve this problem

  Hi susanearle,

  You can try the steps in your previous thread about this problem?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/have-wireless-connection-can-only-connect-from/12a7163c-A54D-4894-81F7-bd4fb92b2da4

  Please let us know, thanks!

• try to start the bonjour service, but get the error message: windows could not start the Bonjour service on local computer

  error message
  Windows could not start the Bonjour service on local computer
  Error 5 access is denied

  I have Vista Home.

  This prevents me to update I have tunes.

  Completely uninstall iTunes. Download the update manually from Apple or here. Restart the system and then install the software you have downloaded.

• Unable to access the top of the window of photoshop-under the mac menu bar?

  Photoshop window slid upward under the mac menu bar, how to make this comeback. Have you tried F buttons does not change. I tried to revive the PS-don't change not. Tried to change working area does not change.

  Does anyone have a solution?

  Another idea is to go to the window menu in Photoshop. Uncheck and check the "Application Framework" and see if that does not reset it.

• How do I cancel the update Windows and restore to the point in time

  Original title: How do cancel you a microsoft update & restore to the previous version, when it happened in the unknown past?

  Access to inside... I get the error this ActiveX component can't create object.  It didn't happen when I ran changed the access code of February or March 2014.

  I bought a new version of Norton Utilities.  They use the same basic logic to save the settings in their programs.  This does not work, and they made it the version or corrupt files that are required by the ActiveX.  Messages say it happened because of automatic updates from Microsoft.  How to get back some unknown update or restore point, as recommended in the post above?  Someone at - there a real fix for this update?  Or even a glimpse of how to solve the problem?  I tried dozens of things without a bit of luck to all!  Thank you.

  Hello Allen,.

  Thanks for posting your query in Microsoft Community Forum.

  According to the scenario, and from now on, I would say that you want to run system restore, and then try to install an update.

  Step 1: Perform the system restore

  To use the system restore

  Before you start the system restore, save open files and close all programs. System Restore will restart your PC.

  1. Open the system restore by clicking the Start button . In the search box, type System Restoreand then, in the list of results, click System Restore. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. Follow the steps in the wizard to select a restore point and restore your computer.

  Important: When you use the system restore to restore the computer to a previous state, programs and updates that you have installed are removed. Utility Norton may also be removed.

  You can also check: System Restore: frequently asked questions

  Step 2: Do a selective (one) approach when you install updates.

  1. Open Windows Update by clicking the Start button . In the search box, type Update, and then in the list of results, click Windows Update.

  2. In the left pane, click check for updates, and then wait while Windows searches the latest updates for your computer.

  3. If you see a message telling you that important updates are available, or you say to look at the important updates, click the message to view and select the updates to install.

  4. In the list, click the important updates for more information. Select the check boxes for the updates that you want to install and then click OK.

  5. Click install updates.

  Note: Read and accept the terms of the license and then click on Finishing If the update requires it. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Now, try the above steps and let us know the result, we will be happy to help you further.

  Thank you.

• Material of restoration to the original state of the manufacturer will make legitimate recovery discs work?

  Hello.

  Back story:
  I tried to create a system to dual-boot with Windows XP and Windows Me on a PC from Hewlett Packard, model a350n, to facilitate access to the old and more recent examples of software in my computer.  Operating systems that are installed properly, however, when running Windows Me, I noticed that the system has detected a large number of hardware problems and a number of missing drivers. I have no problems the first time I installed Windows Me, and I realized that this must have been the existence of partition recovery console Hewlett Packard, who was at the current time, where the Windows Me operating system can locate the necessary drivers for the PC to operate.  Since the deletion of this partition (which I foolishly declared unnecessary from there), problems of hardware in the BIOS, PCI slots, sound cards, etc. exist in abundance.

  Issue to be addressed:
  The main concern is this: I have no legitimate recovery CDs that I received directly at HP, but when I use them, even if they have worked in the past, I thought that the discs do not support my HP model.  I've made several changes to the hardware (for example, replace the graphics card, some CD-Rom drives, additional memory, along with other things).  Cancellation and so restore the material to the original state of the computer will CDs recognizes the HP model once more?

  Thank you very much!

  UPDATE: I tried to return the PC to its original state by removing the extra material and restore that which has been deleted.  We had another similar model of HP with similar CD - RW, CD - R and DVD - ROM drives, so I'm only 95% some that I replaced those that actually are came with this PC.  It would make a difference?  The result is that the recovery disks, which are legitimately HP, not home-made copies, and which were used successfully in the past in this same model, has not recognized the model of PC than they were designed for, even if they are a match.  This may be the cause?  And what can I do about it?  My backup files can be done quickly and efficiently, if I don't mind having to do something eventually destructive, as long as I get those recovery CD to do their job.  It is essential that I restore the PC to its factory condition.

  Thank you!

  Hello Taran_Wanderer,

  Unfortunately there is little that can be done on the side Microsoft.  It's HP to provide you with the disks appropriate for your machine model.

  You can look in an update of the BIOS from HP, but honestly, I don't know if this will have an effect on the question of whether or not the HP recovery disks will work.

  Best regards

  Matthew_Ha

• reads message ' Windows sidebar operated by the system administrator.

  Lost component and all the gadgets.  How to reinstall?  Message appears: "Windows Sidebar is managed by the system administrator.  I AM the administrator

  But how do you mean this?   Maddening!

  Hello

  Remember to make changes on the computer before this problem?

  Follow these methods.

  
  Method 1: I suggest you follow this article. This article helps you to solve the problem and make Windows Sidebar reappear.
  How to restore the sidebar of Windows?
  http://support.Microsoft.com/kb/963010

  Method 2: if that doesn't help, you can follow these steps.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, follow this link
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  a. click Startand then click all programs.

  b. click Accessoriesand then click run.

  c. type regeditand then click OK.

  If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  d. identify the and click the following registry key:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Windows

  e. in the pane, click with the right button on TurnOffSidebar and click Remove. Click Yes to confirm delete.

  f. now navigate to the following registry key:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Windows

  g. in the pane, click with the right button on TurnOffSidebar and click Remove. Click Yes to confirm delete.

  h. close the registry, and then restart the computer. Check whether the problem is resolved.

• "Receive the error message" Windows 7 error 0x8007045D: the request could not be performed because of an i/o device error. "

  Original title: Windows I/O device error?

  Hi all

  I'm Chinmaya and I use Windows 7 Ultimate.

  I have this error message.
  "Windows 7 error 0x8007045D: the request could not be performed because of an i/o device error."

  whenever I try to copy songs to my PSP device. In fact, it started when I was copying a 16 GB file from a USB on my computer. One night before everything was fine. But now he's screwed. I tried several times, restore, backup start in safe mode and almost everything that has been mentioned in other responses from Microsoft. Another important thing, I was you know is

  Whenever I connect my camera to the computer, my computer is not responding. All possible suggestions... Please help :)

  Hello Chinmaya Sharma,

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description provided, looks like you have a problem with the Windows 7 error 0x8007045D error message: the request could not be performed because of an i/o device error

  Perform the disk check and check.

  Check a drive for errors (Windows 7)

  Warning of Chkdsk.

  Important: When running chkdsk on the drive if bad sectors are found on the hard drive, then chkdsk attempts to repair this sector. If no data is available while data may be lost.

  Answer to us if you are having problems with error e/s or any other issue of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• Message window "Not connected to the internet" appears when you have MS and downloads updates.

  Whenever I try to use Windows Update or download MSE I tells me that my computer is not connected to the internet.  My web browser works fine, only when updating or loading of a product of MS IE. Silverlight, LifeCam, MSE...

  I have not done the clean boot - no good

  I tried to add tusted sites - not good

  I disabled and deleted some security I could find - no good

  This is a brand new machine - Dell Studio XPS with Windows 7 installed.  No Malware or Spyware that I see.  Help, please.

  Q: you have no anti-virus application installed now?
  A: No.

  You see the effects of a hijackware infection. See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Win7: see "using the custom installation option" and formatting the hard drive section of http://windows.microsoft.com/en-us/windows7/Installing-and-reinstalling-Windows-7

  NOTE: If your computer came with a set of disks, there is a hidden partition restore (not to be confused with the restoration of the system) you would use to do the clean install (AKA a "destructive recovery").

  After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  IMPORTANT! -Online any Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate before installing updates or IE upgrades AND BEFORE installing your new anti-virus application.

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx
  http://www.us-cert.gov/CAs/tips/ST05-007.html

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/w7repair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• When you try to format CD - RW, receive error message 'windows could not complete the format' Vista SP2

  Impossible to format CD

  Windows Vista Ultimate SP2 installed

  When you try to format CD - RW, error message "windows could not finish this format.

  Because the installed SP2 (which supposedly contains the fix for the problem) can not install the patch - receive 40 Code error when system tries to decompress the files.

  Help?

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD

  Burn a CD or DVD

  http://Windows.Microsoft.com/en-us/Windows-Vista/which-CD-or-DVD-format-should-I-use

  Should which CD or DVD format I use?

  See if help above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Otherwise:

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  They will help you with your question in Vista Hardware and drivers Forum above.

  See you soon.

  Mick Murphy - Microsoft partner

• Problems installing drivers for printer EPSON L110. Error message "Windows could not determine the language to use for the installation: CODE of ERROR: 0x80004005.»

  Original title: trouble installing the drivers for my printer.

  Hello

  I am trying to install an EPSON L110 and eveytime I try to run the CD, it appears this error message.

  Windows could not determine the language to use for the installation: CODE of ERROR: 0x80004005.

  I have windows 7 32 bit OS. What I'm doing. A quick response will be very useful.

  TKS

  Gerard

  Hi, Germain,.

  This problem could occur due to corrupted files. We will try to download and install the latest printer driver on the site of the manufacturer of the printer. Check if it helps.

  http://www.Epson.co.in/epson_india/ink_tank_system_printers/product.page?product_name=Epson_L110&tab_index=4

  See the articles for more information.

  Install a printer

  Find and install printer drivers in Windows 7

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Problem with joining photos for the Windows 8 library mail program and error message 'create an association in the default program control panel '.

  Original title: E-mail question

  I want to send pictures of the library in Windows 8. Cannot do. He told me to create an association in the default program control panel. Been there, no help.

  Hello Jeff,.

  Please keep us updated on the status of the issue.

  I will certainly help you in the right direction to solve the problem. However, I would be grateful if you could let us know that you have set the email client that you use as default to the Control Panel program to send and receive electronic messages from the computer.

  Please respond with the requested information, in order to help you solve the problem.

  Thank you

• Backup and restore of the different States of a database

  Hello
  
  In a development and test system, we want to save and restore the different States of the entire database.
  
  This means, we start with a full (TAG 1) backup of the database.
  On a day team has done in the database, after that we take a full backup (TAG 2).
  The next day, do us a restoration of the TAG 1 and the B team some works, after that, we take a full backup (tag 3).
  Then, we want to continue: restore from TAG 2, TAG 4 backup, restore TAG 3,...
  
  I tried follwing RMAN procedures:
  
  Backup (backup consistent cold)
  RMAN nocatalog target.
  
  SHUTDOWN IMMEDIATE;
  FORCE START S/N;
  SHUTDOWN IMMEDIATE;
  BOOTABLE MEDIA;
  backup as BACKUPSET COMPRESS database ' TEST1' tag include current controlfile;
  ALTER database open;
  
  
  Restore (database in time recovery DBPITR point)
  # get RCS with tag backup rman list «...» »
  # add - one for the RCS, use it in the script for NNNN
  
  RMAN nocatalog target.
  stop immediately;
  bootable media;
  restore the database to the SNA NNNN;
  recover the database unitl Yvert NNNN;
  ALTER database open resetlogs;
  
  Problem is: when we try to go back to an older version, we get a
  RMAN-20208: until this CHANGE THAT either before RESETLOGS change
  
  No idea how to switch between the different States of the database?
  
  Environment: Oracle 11g Enterprise Edition, ASM, Flash Recovery Area, no turning back.
  
  Kind regards
  Joachim

  I think you are looking for incarnations. (I know you said 11g, the doc here is 10 g, I love the research/layout better than the 11g docs).

  http://download.Oracle.com/docs/CD/B19306_01/backup.102/b14192/flashptr006.htm#sthref660

  7.6.6 point-in-time recovery for an Incarnation of the ancestor

  If you use VM, it would be a way to go as well. Restore a snapshot.