Messages written in vertical mode

Similar Questions

• How can I change the text in the Messages to the vertical?

  How can I change the text in the Messages to the vertical?

  If you mean change the orientation, simply turn the phone. If this does not work, close Messages and then run again.

  To close the Messages, press the Home button twice quickly. You will see small glimpses of your applications recently used. Drag to the left to find the application you want to close. Swipe up on the preview of the application to close.

  If it does not, the strength to restart the phone. No data is affected by this. To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

• Update of FF, message says to restart to complete the previous update. I reboot with the same message. Tried to uninstall. Same message, even in Safe Mode.

  I tried to update Firefox and repeatedly getting this message: "your computer must be restarted to complete a previous update of Firefox. Do you want to restart now? "If I click on no, nothing happens." If I click Yes, it restarts and I get the same message all over again. I tried to uninstall the program and get the same message, even in Safe Mode. I tried to start with a configuration of the previous system, but the computer would not give me the dates of previous configuration. I am running XP, and I deleted Internet Explorer, so I can't access the Internet on this computer. I tried to install the update by downloading the upgrade on another computer and transfer it to a flash drive, but I got the same results. If I go to control panel configuration/Add / Remove Programs, it says I have Firefox Version 13.0.1. For about 6 months before this incident, I get a message when I load Firefox, who said that he could not install an update attempt. If I clicked OK, at least he'd still go the old version. Now, he will do even that.

  Hello, the installation of #3 in the initial response folder is referring to the entire directory "C:\Program Files\Mozilla Firefox", not any subfolder or file in particular. If the directory is still present after uninstalling firefox via the windows control panel, and then if it please delete the whole folder "C:\Program Files\Mozilla Firefox" & try reinstalling firefox afterwards.

• Two monitors stacked vertical Mode.

  Is - this Windows 7 64-bit supported two monitors in vertical mode? Piled one above the other. I use an Asus EN9800GT with Windows 7 Home Premium video card. I don't see the option in the Nvidia Control Panel and display Windows. I have a small desktop and can't put side by side. Now scroll right the lower screen to get to the top screen. The two monitors are Samsung Syncmaster 2253BW and 731B.

  Monday, August 16, 2010, 21:48:52 + 0000, CRB64 wrote:

  Is - this Windows 7 64-bit supported two monitors in vertical mode? Piled one above the other.

  Yes, you can position the monitors in any way you want. On the screen
  the screen, simply drag images from monitors at the job you
  physically have them in.

  Ken Blake

• Is it possible to get the expression of quick filter above the list of messages in the vertical view?

  See the attached screenshot.

  I have a fairly big screen so I prefer to use the vertical display (with message pane appears to the right of the message list pane).

  I use quick filters / lot of research in the search for old messages. In doing so, my attention is focused on the message list pane, but to type an expression that I have to drag my focus on the far right of the screen, above the message pane. Logically, this area of the screen should be associated with the message, not the list of messages.

  If a simplistic solution can be available if I ask you if there is a way to customize the location of the elements in the quick filter bar, as I illustrated on the screenshot?

  But I think that the fundamental solution is to make the bar area of quick filter in the list pane message, instead of the current arrangement where it is part of the largest component that contains the message list pane and message pane.

  I welcome any advice on how to solve this problem, for me, or get it repaired for others to share.

  Ah, found the bugzilla database - was looking for link to support the site, but as I couldn't find one, I assumed that this channel has been used on the screen of the excessive defects in bugzilla.

  In any case, a quick search found me https://bugzilla.mozilla.org/show_bug.cgi?id=592248 - where someone complained the quick filter bar was too short in vertical view and this has been resolved by extending the bar on the top of the message pane.

  I guess that preference will depend on the size of the screen. I will take the question through bugzilla and can provide a patch to satisfy both sides, if I have time one of these days.

• HP 15-g020dx: I got an error message "operating system Boot Mode changed."

  I had got an error message on the boot image and I came here, telling me to change the startup parameters to the legacy that I did, but I might be able to register the change because he could do nothing except "esc", which had to cancel the change type. What should I do?

  Hello

  When you change the boot mode and are then invited to enter a 4-digit PIN, there will be no display of the numbers that you type for security reasons - just type in the numbers and press ENTER.

  Kind regards

  DP - K

• Why my windows xp stops leaving a message in energy saving mode

  If I run a virus scan or malware check the computer stops and it says power saving mode.   How can I fix it?

  Hello

  · What is the number and the model of the computer?

  · What is the exact error message or the error code that you receive?

  · On the computer which anti-virus are you running?

  · Who is the service pack installed?

  Your question does contain all the required information necessary for us to help you. Come back with more specific details to help you better.

• 3000 N100, how to get the POST messages and text/VGA mode?

  Story is this: my sister broke its N100 and I removed the lid with LCD. It worked fine until she blew his Windows. Now I need to reinstall, but it is almost impossible in 'blind' mode So, is it possible to POST messages and installation of Windows for display on screen?

  Never mind, I changed the settings of the BIOS using the bios images found on the internet and it worked.

  Press F1 to enter BIOS.

  The right key sequence was ENTERED (since hit F1 permanently open BIOS help screen), right, down, F6, F10, ENTER.

• How to enter the text message written in a popup window?

  Hello
  I tried the functional test of web application using OATS? I have to use the SMS (for comparison with text) written in a Popup. So can someone tell me how to enter and the message of written text in a popup window?

  String test_1 = web.element (35, ' / web: window [@index = '1' or @title = 'SOME TEXT']/web:document[@index='1' and @name = 'frame_OAT1'] / web: div [@texte = "domain errors exist." ") ') .getAttribute ("text");

  The problem with the above line is that Openscript will look for a div with text 'errors in domain exist.' element and if it locates it then she returns the value attribute of text which is "domain errors exist." This exercise don't purge not any purpose.

  If you want to know any text that comes in this div, you must get the index and print this text in this index.

  In case you just want to check, you can use exists() which gives a Boolean result directly. Like this

  Boolean IsExists = web.exists ("/ web: window [@index = '1' or @title = 'SOME TEXT']/web:document[@index='1' and @name = 'frame_OAT1'] / web: div [@texte = 'errors in domain exist.']", 1);

  The official guide are in the downloads page.
  http://www.Oracle.com/technetwork/OEM/downloads/index-084446.html
  Download the item named "Oracle Application Testing Suite 9.2.1 - Documentation" on this page.

  In addition, you said just by writing @index you were unable to retrieve the value. Make sure that the index of the div does not change each time. If it evolves so it is more difficult and it is a whole new discussion.

  Just index values get incremented. For example, if your window generates a pop-up window, your main window has an index of 0, your popup has an index of 1.

  Tell me how it goes.

  Kind regards
  Narayan

• creation of error message in the query mode

  Hello experts,
  I want to create an error message in a mode of input query. Suppose I have a field date of birth and full data
  in the database in this fasion January 1, 2008.
  
  Suppose that in the mode of input query someone enter the value 01/01/2008.It is not an entry for the system. For this error, I want to create an error message.
  
  I wrote this code
  
  If: system.mode = "ENTER-QUERY" then
  If error_type = 'FRM' and error_code = 40358
  message ("Please enter date as 1 January 2008'");
  end if;
  end if;
  
  The trigger, I used is KEY - EXEQRY.but, it shows no error whenever I give an entry like 01/01/2008.
  
  
  can you please what wrong with the coding.
  
  Concerning
  Mehdi

  Yes, the trigger for the error.

  DECLARE
    err_code NUMBER := ERROR_CODE;
    err_type VARCHAR2(3) := ERROR_TYPE;
    msg VARCHAR2(2000) := ERROR_TEXT;
  BEGIN
    IF err_code = 40358 AND err_type = 'FRM' THEN
      message('please enter date as 01-jan-2008');
    ELSE
      message(err_type||'-'||to_char(err_code)||': '||msg);
    END IF;
  
    RAISE FORM_TRIGGER_FAILURE;
  END;
  

  The fact that the 'Fire in Enter Query Mode' option is set to Yes (palette property).

• Error message with nwiz.exe [mod nview.dll AppVer 6.13.10.3190 name] C:DOCUME~1\ADMINI~1\LOCALS~1\Temp\bdec_appcompat.txt

  Windows XP Pro, crashed, took shop, had to be wiped (cleared all updates for several years). Reloaded from the original disks. Added a few other updates since then. When turned on, get the error message and Web site NVIDIA Graphics Driver. I have download long, then a message that it's not compatible with my hardware. Why I get this now? It works, but I get this message every time I turn it on.

  Hello karenfedway,

  Thank you for visiting the Microsoft answers community.

  Try to uninstall then reinstall the Nvidia software.

  First of all, make sure you know material real th so that you can download the drivers and the correct software.

  -Click Start > Control Panel > Add Remove programs
  -Uninstall any software related to Nvidia

  Rebooting and using the Nvidia software for your hardware reinstall.

  Hope this helps

  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Save a message written on a Clipboard, how can I do?

  Please help me understand the process easy (to everyone except me) to right click and save (copy) then how to find a Clipboard to postit to. I don'see a Clipboard and when I usually do findone my element stuck disappears, can you please let me in on this thing or treat? E-mail address is removed from the privacy *.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  If you highlight the whole post, Ctrl + A sends it to the Clipboard. (Same as right-click |) Copy). CTRL + V paste in the destination.

  Where do you want this post you find? There is probably a better way.

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• installation of Windows xp mode: keep getting download necessary message when you click mode XP in startup programs; have updated w / refresh package.

  Upgrade to Windows7 professional to facilitate the use of the vpc and xpmode for existing programs of the company.
  After download of vpc (it seems to work) cannot initiate xpmode... keep geeting a need to download the page in xp mode.

  Hello
  
  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
  Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads
  
  I hope this helps!

• [windows 7] Pixel Bender accident on launch without error message, works only in mode 256 colors

  I recently installed Pixel Bender and it worked the first time I started it, but I've since updated my NVidia driver, and now it crashes at startup.

  I tried to change the program setting in the NVidia Control Panel and tried all options of compatibility, but also 16-bit color, but it does that mode 256 colors, as suggested by this old thread:

  mode 256 colors makes it impossible to view any kind of basic shaders so I have to export flash develop at each change.

  Device Manager does no fallback option, and my computer is in dire need this update, I'm stuck.

  Hello

  To resolve this problem simply change the name of the sniffer_gpu.exe file in the Pixel Bender Toolkit folder to any other without ".exe" for example sniffer_gpu.exe.bak. This will stop this toolkit to get a GPU that can be incompatible with app (see manual for supported GPUS) and forces CPU usage to make images.

• Delete the message from the program that says Sonic Mode of Activation

  At the same time I have tried to install a program. Something was wrong with the download, and so whenever I turn on my computer and want to go to the internet, on a Windows Installer window opens for me click. In this window is a message that says Sonic Mode of Activation. Choice to browse the contents of the file of the computer are given. I want to keep it all the time what can I do to fix this? In addition, argues is no CD-Rom drive. This may sound stupid, but I tried to fix it without success.

  Hello, Jeanne LeinaniKamanu,.

  Go to run, they type in Msconfig. Go to the Startup tab, find "isupm" and "issch" and uncheck the box. Click on apply and OK. Then restart your computer and you should receive is no longer a message.

  Let us know if that helps.

  Marilyn