Messed with files - sort of about half of the desktop icons to the same as that of windows media now changed.

Similar Questions

• Windows Media Player play about half of the clip, then the picture cuts off, the screen goes black, but audio continues to play.

  Windows Media Player play about half of the clip, then the picture cuts off, the screen goes black, but audio continues to play.  Just reinstalled MP 11, same problem.

  Hello

  · What is the number and the model of the computer?

  · This occurs when you are working on any specific file format?

  · Were there any changes made on the computer?

  · You play the file in mode full screen?

  Change hardware acceleration

  a. you can try to change the hardware acceleration in the middle and check (you can try another level too.)

  b. right-click on a space empty on the desktop.

  c. go to the resolution of the screen.

  d. click Advanced settings, and then click the "troubleshooting."

  e. set hardware acceleration in the middle. (Here you'll get the only option your video card sound support).

  You can also check: you receive an error message of codec or audio plays video but does not play when you play media files in Windows Media Player 11: http://support.microsoft.com/kb/926373

• About half of the Contacts on my Macbook do not appear on my iPod

  About half of the Contacts on my Macbook pro do not appear on my iPod touch via icloud

  .

  iPod is 9.2

  MacBook is 10.11.2

  Try registering the iCloud account, wait a few minutes, then reconnect and see what happens.

• reason for my windows 7 OS crashed & had to be re-installed seven times in nine months with the losse of precious files is the same reason that microsoft has been duffed the international space station?

  am I right to assume that the same reason, my windows 7 OS crashed & had to be re-installed seven times in nine months with the losse of precious files is the same reason that microsoft has been duffed the international space station?

  Hello

  If I understand correctly you install os 7 times, still problem happens, its just a bad sector in plateau, well shot cause want to check your hard drive a d, you need to change your hard drive to solve this problem, if it is in warranty log a ticket

• 6 of Lightroom cannot read my Canon 5 d Mark III photo files, the import message I received: the following files were not imported because they could not be read. I use the same camera that I used Lightroom 5 with the same cards Compact flash.

  6 of Lightroom cannot read my Canon 5 d Mark III photo files, the import message I received: the following files were not imported because they could not be read. I use the same camera that I used Lightroom 5 with the same cards Compact flash. The files are: DK5A0243. CR2

  Lightroom 6 trying to copy pictures to a different directory than what is Lightroom 5. That's why you have the problem.

  You can change the directory where you are teaching LR 6 to place photos, or change the permissions on this directory to read & write.

• iTunes can't locate some of my music files. Places seems to be the same however. Help?

  My old motherboard itself killed a few weeks ago and I finally had time to take out the hard drive and transfer all my files over to my new laptop. The old and the new have been / are running the same version of Windows 10.

  I met a strange problem with iTunes (version 12.4.3) locate all my music files now. When I transferred the old files to the new computer, I did it without changing anything. All iTunes folders and subfolders are together just as they were before and so are my music from Amazon and other music files (some from other music sites, more old torn records). Nothing has changed on the level where it was stored, or how files or albums have been appointed, only the computers themselves. I literally just plugged the old hard drive, dragged all the subfolders in my music in the main folder of music on the old pC to the new folder of music from PCs and went on my way. I'm looking for the files on the old HARD drive and comparing them to the new computer and all are exactly the same.

  iTunes was no a problem of localization of music and videos in the folder iTunes at all, but it seems to refuse locate others, at least automatically. He finds some of the things Amazon, but not all, and it goes the same for ripped files. It seems to be forcing me to go through and individually, select it "!" marked songs/videos to find them manually on my computer. When I select the option automatically search and find other missing files, it tells me that iTunes could not locate the other missing files in 2000. This happens even with full albums that are located in the same folder. For example, I have a Florence + the Machine album, I bought from Amazon and all songs have been marked as being absent, so I found one of the songs manually in the album folder on my PC where are all the other songs on the album, but iTunes could not find the other songs on this album, even on its own. Normally this wouldn't be a problem and I'd go just to do one by one, but for 2000 files, it's a big enough problem. I'll be sitting here all night or add more just each individual file, even if many are together.

  I'm not sure what is the problem, but I'd like an overview of how I could speed up the process from here. I pourrait delete all photos of does to and re-add-the, but that represents only ~ 500 files, the majority is the singular songs and because I can't seem to sort my files missing library I always face the boredom.

  The problem of 'missing file' with exclamation points occurs if the file is no longer where iTunes is expected to find. Causes possible is that you or a third-party tool has moved, renamed or deleted the file, one of its parents, or the reader, records it feeds has been a change in the letter of the drive or you have moved a non-portable library to a different path (see make a split cell library for more details). It is also possible that iTunes has changed from waiting for the files in the presentation of pre-iTunes 9 post-iTunes 9 layout, or vice versa, and so looking for a bit in the wrong place.

  Select a track with an exclamation point, use Ctrl-I to get information, then click on no when asked to try to locate the runway. Look under the file tab for the location that iTunes thinks that the file should be. Now look around your hard drive. I hope you can locate the track in question. If a part of your library has just been moved, renamed a folder or a drive letter has changed, it should be possible to reverse actions. If the difference between the two railroads is an additional music folder in a path, then it is a problem of layout. I can explain more if this is the case. If everything is where it is supposed to be trying to fix the security permissions for iTunes for Windows.

  In some cases, iTunes may be able to repair itself if you go through the same steps with Get Info, or during playback of a track, but this time, click on search and browse the lost track. Then, it can offer try to automatically correct the other broken links. Although he said something like 'use the same location' I think he expects to find titles in the same provision, artist / album, they were previously, with a systematic change to the path.

  If another application like Windows Media Player has moved/renamed files, or the library was moved from OS X to Windows, then chances are that subtle differences in naming strategies it will be difficult to restore the media to the precise path that iTunes is pregnant. In this case, as long as the missing files somewhere, you should be able to use my FindTracks script for reconnecting to iTunes. See this post for an explanation of how it works. It may need some adjustments if your media is in a non-standard layout.

  If you want me to try to provide specific advice, please post back the following details:

  1. The location of the media under Edition folder > Preferences > advanced
  2. The location of a sample of missing follow indicated under Get Info > file > location that begins file://localhost/
  3. The real path to the file which you gave 2 details

  TT2

• How to extract the same song, several times using different bit rates or formats and store all the digital music files in WMP 12 default on the same HDD music library

  Using Windows Media Player 12 (w/under Windows 7), "can I ripping the same song, several times, using different bitrates & and/or formats and store all the digital music files in the music library by default WMP - 12, on the same hard drive?

  1.) #1 goal: tear up the same song repeatedly, w / "different rates" as a WMA file.

  2.) #2 goal: tear up the same song repeatedly, w / "different rates" as an mp3 file.

  3.) #3 objective: NOT to each subsequent copy (version) of the song, deleted & and/or replaced by the previous version of the song [even].

  4.) question Bottom Line Up Front--> is Windows Media Player 12 (included with the Windows 7 operating system) are able to achieve '#1 objectives; #2; & #3 above?

  5.) details/example: I want to tear the piece "Maria Maria by Carlos Santana" to my laptop as a Windows Media Audio [WMA] file.  In addition, I would like to rip the song 'Maria Maria' three several times with 3 different bitrates in format WMA; and, as an MP3 file.  Therefore, my final result wished (after the extraction process), will take place the four 4 audio files split up as follows: (a) 'Maria Maria by Carlos Santana'--> Format: file WMA; Ripped @128 Kbps bitrate.  (b) ' Maria Maria by Carlos Santana'--> Format: file WMA; Ripped to the "Variable bit rate; (c) ' Maria Maria by Carlos Santana'--> Format: file WMA; Ripped commissioning "Lossless." and (d). 'Maria Maria by Carlos Santana'--> Format: MP3 file. Ripped @256 Kbps bitrate.

  6.) my preference: I do NOT want to rename the file (s). {for example, 'Maria Maria by Carlos Santana' renamed/changed for--> "Maria_Maria_by_Carlos_Santana_128kbps.wma",...} 'Maria_Maria_by_Carlos_Santana_256kbps.mp3 '; etc.}.  In addition, I am not concerned about the additional disk space that will be consumed after multiple copies of the same song with different speeds of transmission and different formats.

  7.) my experience w / Windows Media Player 10 (w / the operating system of Windows XP): using WMP - 10, my goal (s) described above is not a problem at all.  Simply insert the CD purchased by Carlos Santana, containing the song "Maria Maria"... Select the desired Format (WMA; WMA VBR; WMA Lossless; or mp3)... Select the desired flow rate (WMA... 128/160/192kbps_mp3: 128/192/256/320 kbit / s; etc.) ; and click on the "RIP" button to start the copy process on the hard disk of of Carlos Santana's "Maria Maria".  This process (w / WMP-10) would result in having the same song, copied on the hard disk, with levels of quality different "audio" (via the different bit rate settings); regardless of the format (MP3/WMA) which was chosen.

  8.) my experience w / Windows Media Player 11 (w / the operating system of Windows XP): using WMP 11, to described above of my objective (s) could not be reached e-a-s-i-l-y.  The problem with WMP - 11 - in short - which was after the desired selection "Rip settings" tab 'Options' of WMP - 11 (i.e., Format & Bit Rate) and heart-wrenching piece wanted to {'Maria Maria by Carlos Santana'} a moment later/second, WMP11 remove / would crush the previous version of the song [even].  Therefore, the program would NOT allow the user to have multiple copies of the same song on the hard drive of the PC; which obviously restricts a user to have the freedom to choose what level of quality digital audio, they prefer to listen to.

  9.) the ability to have multiple copies [at my descretion] of the same song (on my hard drive) with different bitrates and formats in my music library, is important for me because it has a direct impact on "how I enjoy MY music ', and in what form (audio quality), I choose to listen to my music.  {For example, when I exercise and listening to my camera, digital audio player (Zune), a song ('Maria Maria by Carlos Santana'), will usually be torn off at a lower rate due to the unit of capacity reduction of storage - compared to the storage capacity of notebook PCs/desktop/external hard drives PC.}  However, when I listen to my music through my home cinema or entertainment system (which contains a hard disk dedicated with a large storage capacity), I prefer to load the entertainment system with digital music files that have been ripped to WMA... with the bit being rate-setting is for the: settings "WMA Variable Bit Rate" or "WMA Lossless.

  10.) there you have it.  This is my first post in this forum.  I hope that [detailed] explanations, will be sufficient to encourage these "with knowledge & the hands on experience" using Windows Media Player 12 (as well as with WMP-10/WMP-11 respectively), by providing a [step] "How-to"... "solution to my situation.  It would be highly appreciated.  I'm looking forward-'the solution' - and relevant suggestions & and/or community feedback regarding my request for assistance.

  * Thank 'All' (that would) in advance... For your time & Assistance *.

  Certainly, you can, but I would say that they be in different folders, for your convenience as well as Windows.  You can create one for each debit/format, then you will know who is who.

  In Windows Media Player, on the toolbar, select Tools, Options, Rip, and then select the flow you want first, rip music, then change the folder (higher on the same tab) and rip again... and so on and so forth.

  When you are at home on your home theater, you can use the 320 bitrate folder, when you transfer to the Zune, you can use one of the lower bitrate files (although I personally tear it up to 320 and let the Zune reduce as he wants, even with the iPhone via iTunes, hard drive space is not really a problem here) my server has several hard drives, and I can always add more if and when space is low!

• When I try to copy files to a CD, I get message "Windows has a problem to copy this file to a CD." How to fix? I get the same message that I click on "Copy to CD" or drag the file to copy to the CD player.

  When I try to copy files to a CD, I get the message "Windows has encountered a problem when trying to copy this file."  I press the button "Retry" without any result.  I get the same message that I have click on 'Copy' files on a CD or drag the files to copy to the CD player.  I was able to copy these same files to a CD a few days ago.  Thanks for the suggestions.

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  1. don't you get an error code along with this error message?
  2. what CD burning software is installed on your computer?
  3. what kind of CD do you use to burn?
  4. What is the status of the CD - DVD drive in Device Manager?

  Method 1.
  Let us first check the status of the optical drive in the Device Manager. Check if there is no error code or yellow mark is listed.
  Reference:
  Explanation of error codes generated by Device Manager in Windows XP Professional
  http://support.Microsoft.com/kb/310123

  Method 2.
  If the problem is to start the computer in a clean boot state and check if you are able to accomplish this task.
  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• In the error message is Vista "Windows Media Player cannot play the file, might not support the codec used to compress the file.

  It worked very well what place please?

  * original title - Window Media Player cannot drive cannot read the file the player could does not load the file or may not support or does not support the codec used to compress the fichier.*

  Hello

  1. what changes have been made to your computer before the problem?
  2. the problem occurs on a particular file?
  3. What is the format of the file you want to play in Windows Media Player?

  You may encounter this error message for the following reasons:

  (a) the file type is supported by the drive, but the file was compressed by using a codec that is not supported by the player.

  (b) the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player cannot play the file.

  Windows media player will play only the files and videos only if it supports this type of file.

  Please see the bottom of the article that gives you information on the types of media files that supports Windows Media Player.

  http://support.Microsoft.com/kb/316992

  If the files are not supported by Windows media player, then you will need to use a few players from third party that supports this file format.

  WARNING OF THIRD PARTY SOFTWARE

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  See the link below for more information on the codec.

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

• When I include photos from a folder in the Photos app in the dock, and I have created an album for them, their changes. It is important for me to keep them in the same order that they were in the file. (It's a numerical order). Any solution?

  Recently, I switched from PC to Mac, and I transferred all my files photo. Now I am their integration in the Photos app in the dock (by dragging the file etc). But when I include photos from a folder in the Photos app in the dock, and then create an album for them, their order in the album change of what it is in the file. It is important for me to keep them in the same order that they were in the file. (In the file it is in numerical order). Any solution?

  You can drag and drop to any order in your albums.

• Sometimes a web page is displayed with only text and no picures. It is not always the same site and is not always the case. If I'm going to explore for the same website that always works

  Sometimes a web page is displayed with only text and no picures. It is not always the same site and is not always the case. If I'm going to explore for the same website that always works

  Hello

  Also try a Ctrl + F5 refresh. This allows to bring the content of the page again.

• I don't see pictures to the owner/documents without opening each file individually. I just see the same image of a mountain and the Lake for each file.

  I don't see pictures (jpeg images) to the owner/documents without opening each file individually.  I just see the same image of a mountain and the Lake for each file.  When I look in windows XP, the JPEGs under 'my computer' and select 'film' or the 'miniature' I can see the image.  Why can I not see the image using Vista?

  I don't see pictures (jpeg images) to the owner/documents without opening each file individually.  I just see the same image of a mountain and the Lake for each file.  When I look in windows XP, the JPEGs under 'my computer' and select 'film' or the 'miniature' I can see the image.  Why can I not see the image using Vista?

  Start button > in the search box, type options records > press the Enter key > click on view tab > uncheck " always show icons, never thumbnails " > click OK for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• I want to activate Acrobat Pro 9 serial key and get message that are 2 active activations. We're old computer with problematic material and other is the same pc that I didn't turn off the license and reformatted. What should do?

  I want to activate Acrobat Pro 9 serial key and get message that are 2 active activations. We're old computer with problematic material and other is the same pc that I didn't turn off the license and reformatted. What should do?

  I didn't know, I had to disable before turning back, but now I don't have this option. Is there a way to disable these two licenses and activate again the good?

  Hi vasilisp36877173 ,

  Please see these items:- Learn how to enable or disable Adobe applications

  Solve the problems of activation and deactivation of Adobe and error messages

  Let me know how it goes.

  Kind regards

  Christian

• Report with multiple columns NUMBER of counts of the same table

  I am new to discoverer, so I'm a little lost.
  
  I work to create a report to show usage data and Knowledge Base of e-business. I have written using subqueries in SQL query that is in the format:
  
  Solution number | Soultion title | Solution views. Positive feedback | Negative feedback
  Title of 12345 _ 345 _ 98 34
  
  
  The entries 'Views', 'Positive' and 'Negative' are stored in the same table, so I do a count where setid = setid and usedtype = VS, then count where usedtype = usedtype and PF = NF
  
  Discoverer, I can get the number of solution, the title and THE totals but I can't seem to understand how to get an ACCOUNT for three different things from the same table in the columns on the same line.
  
  When I go on change map-> select the items once I select the option NUMBER of the UsedType column in the CS_KB_SET_USED_HISTS table, I can't select it again. I also found way now to add a column based on a query entered.
  
  If someone could help it would be much appreciated.
  
  Thank you
  
  Published by: Toolman21 on December 2, 2010 14:17
  _ to correct spacing added.

  Hello
  You can separate the column with a case or decode.
  for example to create 2 calculations:

  case
  When usedtype = "PF".
  then - that contain both
  0 otherwise
  end

  case
  When usedtype = 'NF '.
  then - that contain both
  0 otherwise
  end

  After that, you can create the aggregation count on those.

  Tamir

• Why do two files with half of the songs on the album in one and the other half to the same album

  When I download an album place it in my folder of music, and then to the Media Player update the album information I have two albums of the same name in media player with four titles in and the other with seven titles and all tracks are from the same album...

  Hello

  You can re-create the database of Windows Media Player and see if that fixes the problem.

  To resolve this problem, delete the Windows Media Player database. To do this, follow these steps:
   
  a: Exit Windows Media Player.

  
  b:  Click Start, type %LOCALAPPDATA%\Microsoft\Media Playerand then click on OK.
  
  c: select all the files in the folder and then click on Delete on the file menu.

  Note You don't have to remove the folders that are in this folder.

  d:  Restart Windows Media Player.

  Note Windows Media Player automatically rebuilds the database.

  
  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:
   
  a: the release of Windows Media Player.
  
  b: click Start, type %LOCALAPPDATA%\Microsoftand then click OK.
  
  c : select the Media Player folder and then click delete on the file menu.
  
  d: Restart Windows Media Player.

  Note Windows Media Player automatically rebuilds the database.

   
   
  Hope this information helps.