Satellite P100 - boot failure after BIOS update

Similar Questions

• Re: Satellite L500D - boot problem after BIOS update

  I downloaded the new version of BIOS (v1.4) official Toshiba site to update my computer Satellite L500D (PSLK0A - 00U009). But after the update, Windows 7 cannot start, Windows logo appears for a while then it restarts automatically. Windows then goes into repair mode. I followed the instructions on the screen to fix. But it does not work.
  When I reinstalled Windows, the computer worked fine until Windows Update told me to restart the computer. The computer dies again.

  I think that this version of BIOS has a problem. I wonder if there is a way to downgrade the BIOS to the earlier version. I found some instructions on the net to use the Phoenix recovery disk, but I have no file disk and BIOS.
  Please Please HELP, very appreciate.

  TKS

  Try to install the OS to help original Toshiba recovery image. After disabling automatic Microsoft updates to install. When you get the message about controlled initially available updates and install important updates only.

  Check it once more to see if the same thing will happen again. Display the results.

• Satellite Pro P200-15W: after Bios Update 1.90 incredibly noisy fan

  Hi, I have a Toshiba Satellite Pro P200-15W, I recently made an update to BIOS version 1.9 and seems to have been a big mistake.
  After restarting the computer, I had a lot of software deconfig and the fan has become incredibly noisy.

  I have the problem with the Toshiba Vista registration software, I get this message: "registration of Vista has stopped working". I read other discussions, I don't want to just disable it in the start.ini file, I would actually solve the problem if there is a way.

  Is there a way to change the configuration of fans? I read a post from Toshiba on another model of laptop that has had the same problem of noisy fans after an update of the BIOS, they gave that a solution with a new version of the BIOS, is there a way to reverse the BIOS to the previous version? (recovery CD will be useful for this purpose)?

  See you soon

  Edgard

  Hello

  It seems that the picture of the fan was changed and renewed in the new version of BIOS, and so fans run fall.
  Why the table fan has been changed?

  Well, usually something like this is necessary to improve the reduction of the internal temperature while the CPU and GPU are running with maximum performance.
  This helps to prevent the equipment from damage!

  Usually, the recovery CD formats the whole HARD drive (partitions too) and installs only the image of Toshiba on the notebooks of HARD drive.
  The image contains the OS, drivers and additional software and has nothing to do with the BIOS update.
  But you can try to recover the laptop to see if you can solve the problems of software as "Vista record"!

  If you want to reverse the BIOS, you will need to contact the ASP in your country!

  Sorry, but all I can suggest.

  Best regards

• Satellite C650 - black screen after BIOS update

  My Satellite C650 Windows 7 - won't start afte BIOS update / switch.

  Everything worked very well until the automatic update of Toshiba asked me to download and install the new BIOS update, I did. At the same session Windows and McAfee asked updated. I agreed to all. After all updates have been installed, turns off. The next day when I walk, I see only black screen. I also tried F2, F12 and drive recovery. Nothing happens!

  Any recommendation?

  Hey,.

  It seems that something was wrong during the update of the BIOS and so that you can t the computer unbootable. But I put t understand why you did the BIOS update. If everything works correctly, you can forget about this update. More if you do a BIOS update you shouldn't t run any other updates or programs that might affect the update of the BIOS.

  Anyway, in this case you can do nothing and you need professional help. Please contact an authorized service provider and guys can help you update the ROM module On the Web from Toshiba site, you can find a list of all the FSA:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good luck! :)

• My Satellite L300-110 hangs after BIOS update

  My Satellite falls down after I updated the BIOS. The old version of my Satellite L300 - 110 (PSLB0E) BIOS was 1.40 and upgrade to 1.50.
  From there on, my system hangs over and over again.

  Any help please. I cannot install Office Enterprise 2007, cannot defragment all my readers.
  Is there an option to restore changes made to my BIOS?
  Help!

  The default settings in the BIOS load after the update?

  You can reinstall Windows with the Toshiba Recovery disk? First back up your data because the HARD drive will be formatted and then start the installation of recovery.

  A restoration to the previous version of the BIOS is not possible, because on the Toshiba site is only the most recent (1.50) BIOS. Only an ASP (authorized service provider) can do a restore.
  You can search for an ASP here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an ASP.

  I don't know Mr. but you did a backup of the old BIOS? Maybe you can Flash this back.

• Satellite A100 psaa9e beeps after BIOS update

  Hi all!

  My pc is a Satellite A100 psaa9e and after that the Bios updated Bios say 'no tmp or tmp has failed. "

  I have try this procedure (http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=36186&tstart=0) and my pc does not restart automatically.
  He finishes the beep continuous beep, a low beep and two normal beep, and * didn't do anything that I have not reset! *.

  _FLOPPY LEADER: _
  the diskette is 1.44 m
  MINIDOS on the diskette. SYS PHLASH16. EXE BIOS. PHLASH WPH. INI
  the BIOS. WPH is version BIOS of San Antonio s10gm590.rom (5.90) http://support1.toshiba-tro.de/tedd-files2/0/bios-20070709111839.zip
  the PHLASH. INI file contains the following:
  [UI]
  Advanced = 1

  [Hand]
  RetryCount = 3
  UpdateMode = 3
  FormatVersion = 2
  UpdateFlags = 802880
  UserFlags = 802080
  UserMask = d121a4
  PSIFlags = 8000080
  UserMode = ffffffff
  BackupFile =
  ImageFile =

  Please help me!

  In my opinion, the ROM module where the BIOS is stored has been damaged or has been flashed properly.
  In your case, I recommend you contact the ASP technician and ask guys processional flashing the BIOS.

• Satellite L300 regularly freezes after BIOS update

  I've updated the latest bios for my Toshiba Satellite L300. However, after using the computer for half an hour, the computer is frozen.

  Even though I reinstalled the operating system, this problem still occurs. Can someone view please the link to the previous bios for this Toshiba L300?

  Kind regards.

  Check if there are several versions of BIOS according to the operating system that you are using as if it were with other series of satellites?
  And redefine the BIOS settins on default. This often allows too much.

  Not sure, but I think that you will not find a previous version of the BIOS on Toshiba download page and so you can ask your ASP if they can return BIOS back to a previous version.

• Re: Satellite L40 - black screen after BIOS update

  Hello world

  I have exactly the same problem, as shown here:

  http://forums.computers.Toshiba-euro...ThreadId=35156

  My laptop is a Satellite L40 - 150 (model PSL48E) it came with Vista and BIOS version 1.60

  I updated the BIOS to version 5.50, because I wanted to install Windows XP. The BIOS update process went well and the computer restarted automatically. After the reboot, I entered the BIOS (by pressing the F2 key). I pressed F9 to load the default settings and you exit the BIOS, saving the changes.

  Restarting the laptop and the screen is now completely empty. Nothing appears in it.

  I tried to remove and then reinsert the RAM modules, but it did not help.

  So, I guess the only option is to return the laptop to a service center?

  Why Toshiba do that? They are this deliberately or what?

  Kind regards.

  Hello

  I put t agree with Leolo and put I t too agree with you.
  The point is that there are tow updated BIOS for the L40.
  One for Win XP and one for Win Vista;
  But the two BONES work on with the two BIOS but some functions such as the FN buttons wouldn't work if you n t use good BIOS for the good OS.

  The BIOS on the Toshiba page is not defective. But of course, it is always possible that something will go wrong during the BIOS update procedure because the BISO update is always risky!

  One of my friends has updated the BIOS on this laptop and everything went well!

• Satellite C855 - white screen after BIOS update

  Hello

  I am a beginner user,
  I have Satellite C855
  Yesterday, I downloaded a 'update BIOS"that was sent to my computer.
  Since that my screen is blank, there is a hum in the background.

  I have a recovery back up on my external hard drive, but of course, the screen is blank so I don't know how the product.

  I think I must have downloaded a model or the update was not compatible.

  Hello

  White screen do you mean that nothing appears on the screen?
  You see the start screen of Toshiba, or if you are able to access the BIOS?

  Where this is not possible, try this:
  Disconnect the power adapter, remove the battery.
  Press and hold the power button for about 30 seconds.
  Then connect the two parts (batteries and AC adapter) for the laptop and try to turn on the unit.

  In case this would not solve the problem of the laptop, I'm scared of m the BIOS update was not completed successfully and I think that only authorized Toshiba service provider would be able to help you.

• Satellite C660D white screen after BIOS update

  I ran the update of the BIOS on laptop Satellite C660D PSC1YE recommended and he appeared to succeed, but when it restarts the screen won't turn on. I tried a few things to fix, but nothing worked.

  Tried:

  • connect an external monitor via VGA - white too
  • remove the battery of the CMOS button
  • removing a hard drive startup, to replace again
  • a short-circuit the J1 jumper under RAM slots

  What else can I try?

  Here is the windows bios update program:
  http://Support1.toshiba-tro.de/Tedd-...0601184846.zip

  Try to start with the battery.

• Satellite A100-153: changes after BIOS Update V2.00

  Where can I see what the new bios update change? I want to know it befor I flashed the bios because the last time that my phone no longer works after a bios update and I had to bring to toshiba. So I hope you can help me.

  THX

  Post edited by: LukasU

  Hello, Lukas

  Unfortunately there no public document on this subject, but if you see other topics, you will see the latest version fix some graphics issues and it is confirmed that the latest version fix this with success.

  I put t know why your last update of the BIOS has been without success, but when you do the BIOS update please remember there is no external device connected, and is very important to do with AC power only and not with power supply battery. Before you start with the update BIOS please Info how to do this.

  Good bye

• Satellite Pro A200 - problem after BIOS update

  Help!

  Tried the BIOS update, got the screen blue, computer laptop doesn't work anymore, any chance I can reset the BIOS?
  Sorry for the vaugeness of the position enough to receive the message without reason below

  "Your message contains profanity or inappropriate language. In the interest of your fellow forum users, we ask you to change your message. »

  Hello

  I'm sorry to hear that. It's a really bad situation now. Unfortunately, I do not believe there is something you can do alone and I'm afraid that you need professional help.
  The best thing you can do is to contact the nearest authorized service provider.

  They can help you.

• Pavilion g6-2006ax: no boot device after bios update

  I flashed the latest bios for my model to win 8 64-bit, and then when it restarted, it says no boot device, the bios detects no hard drive can boot from USB but when I try to format or repair it is detected no drive to do. I took battery cmos out and get out again but nothing. I also tested the hold down windows but with the b button and the power up and let go of all keys but the remaining blank screen bios recovery does not pop up. How to return to old bios?

  the laptop booted from the external hard drive, then I flashed the bios back to the old and it worked!

• boot problem after bios update

  I was recently asked to install a new update of the bios on my HP Envy 15.

  After that installing Windows 8.1 is turned on and the version of the bios detected is Insyde F.56

  However, before the update, I had a dual boot by Grub2 and now I am unable to run

  the versions of Linux installed in children partitions on the same drive.

  This version of the bios seems to me to prevent the loading of Grub2.

  Can you help me to solve it?

  That's exactly what I did before:

  (1) linking boot-repair a liveUSB / recommended repair.

  (2) press ESC during startup / press F9 / select Ubuntu in the boot menu / start Ubuntu / run Startup Repair / recommended repair.

  In the case that grub won't load and windows starts.

• Satellite C660: No WLAN after BIOS update

  I have a laptop model C660-115 (PSCOLE).

  Given that I made an update of the BIOS (in vs 1.40) my WIFI doesn't work anymore.
  I made sure the drivers for the card WIFI (Realtek RTL8188CE) are up to date.
  Windows says the WLAN card is ok ("device is working properly"), but no connection is possible.
  My wired Internet connection works fine.

  Any suggestions? Clearcut alternatives? Please?

  Out of curiosity: why have you updated the BIOS? Have you noticed a serious problem with your laptop computer or just to have the latest version?

  Can you turn on/off wireless card using the FN + F8 key combination?
  Are you sure THAT WLAN is enabled before you try to use it?

  Your WLAN is visible for your laptop?
  Have you tried to reboot your router?