User names found using the command run "control userpasswords2" do not match my user accounts

Similar Questions

• Error message: the software can be installed by using the command "run under...". ».

  I have amtrying to load the HP Photosmart D71000 series. Keep is error message: the software can be installed by using the command "run under...". ». Advice suggests logon as a user with administrator privileges. This was done and same message came.  Why?

  Try right click on the setup.exe > run as admin.

  If this does not work, try the Vista Hardware and drivers Forum:

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  See you soon.

  Mick Murphy - Microsoft partner

• I can not use the command share in safari, mail, notes, etc. since I updated to El Capitan (10.11.5). No way to solve it. Please help me.

  I can not use the command share in safari, mail, notes, etc. since I updated to El Capitan (10.11.5). No way to solve it. Please help me.

  There is a problem with your installation of OS X. The easiest way, but not the fastest way to fix it is to reinstall the operating system. Unless you are in a hurry or have measured access to the network, it is what I suggest, especially since I don't know if there are any problems with the installation. Please backup all data before reinstalling. You won't need the backup unless something is wrong.

  The below, advanced shortcut if it works, can save you some downtime (and the cost of a download of several gigabyte, if necessary.)

  1 back up all data.

  2. disconnect all external storage devices.

  3. start in recovery mode. Select a language, if you are prompted. The OS X Utilities appears. One of the options is to install OS X. This is not what you do.

  4. This step is only necessary if you use FileVault 2. If you don't know what's FileVault, you use it. Go to the next step. Otherwise, launch utility disk, then select the icon for the volume FileVault ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Select open in the file menu and enter your login password when you are prompted. Then quit disk utility must be returned to the main screen.

  5. Select get online help. Safari will launch. While in recovery, you will have no access to your Favorites, but you won't need them. Load this web page.

  6. triple - click anywhere in the line below to select this option:

  chflags -R norestricted /V*/*/S*/*/Caches

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  7. Quit Safari. You go back to the OS X Utilities screen.

  In the menu bar, select

  Utilities ▹ Terminal

  Launch the Terminal application. Paste in the Terminal window by pressing the command-V key combination.

  Wait for a new line ending with a number sign (#) to appear. Quit the Terminal must be returned to the main screen.

  8. Select

  ▹ Restart 

  in the menu bar.

  9. This step must be performed after the restart, and while you are logged as administrator, not in recovery mode. If you have only one user account, you are the administrator.

  Select and copy this line as in step 6:

  sudo /usr/libexec/xpchelper --rebuild-cache

  Paste in a Terminal as before. You will be asked for your login password. Nothing displayed when you type. Type carefully, and then press return. If you do not have a password, you will need to configure one before you can run the command. You can get a warning to be careful. Confirm. You don't need to display the warning.

  If you see a message that your user name "is not in the sudoers file", then you have not logged as an administrator. Log in as one and repeat this step. You don't have to repeat the previous steps.

  Wait for a new line ending with a dollar sign ($) below what you entered.

  10. make as in step 9 with this line:

  sudo /usr/libexec/*/app_sandbox_cache_builder --rebuild-cache

  You can then quit Terminal.

• Can't paste the screenshots using the command C?

  Hi, I've always been able to take screenshots (command + Opt + shift + 4) and paste them directly in mac mail emails or Messages by using the command + c. lately I am not able, maybe since 10.11.4? I am still able to take screenshots but I am unable to paste them. They are now on my desk and I have to search for them and then drag - move which is more slow than before.  I also notice the same problem in photoshop CC 2015, that I can paste is more directly the screenshots but drag and drop them on the desktop.

  I don't know what is the cause. Everyone knows this and is there a way to fix it?

  Thanks for your help.

  Press the function instead of the Option key when taking the screenshot.

  (141973)

• Get - VM: with "xyz" name VM is not found using the specified filters.

  Hello everyone!
  
  I have a script that reads a CSV with multiple host names, to connect to vCenter and should get the name of host, ip and PortGroup information to generate an external file of CSV.
  It happens that several cases vm does not exist in vCenter and returns me the below error:

  Get - vm: 04/07/2016-14:41:58

  Get - VM

  VM with the name "pxl1sso00008" was not found using the specified filters.

  No caractere:31 of C:\Users\f3135606\Desktop\vmTeste1.ps1:25

  + foreach ($vmName in $vmList) {get - vm $vmName |} Select Name, @{N = "Network"; e = {$_...}}

  +	~~~~~~~~~~~~~~
  	+ CategoryInfo	: ObjectNotFound: (:)) [Get - VM], VimException)
  	+ FullyQualifiedErrorId: Core_OutputHelper_WriteNotFoundError, VMware.VimAutomation.ViCore.Cmdlets.Commands.GetVM

  
  

  
  How would I do to get the information from an input file, see the vCenter and if this positive results write the file, ignoring errors. Ideally, if not to find the machine, simply create a line in the output file with only the hostname with the rest in white.
  
  Follow the .ps1 file:

  
  

  
  

  $vmlist = Get-Content C:\vmnames.csv
  
  if (!(Get-PSSnapin -Name VMware.VimAutomation.Core -ErrorAction SilentlyContinue))
  {
  Add-PSSnapin VMware*
  Set-PowerCLIConfiguration -DisplayDeprecationWarnings $false -DefaultVIServerMode multiple -InvalidCertificateAction Ignore -Scope Session -ProxyPolicy NoProxy -Confirm:$false | Out-Null  
  [void](Get-PSSnapin VMWare.VimAutomation.Core -ErrorVariable getVmwareSnapinErr 2> $null)
  if ($getVmwareSnapinErr.Count -gt 0) {    Add-PSSnapin VMware.VimAutomation.Core }
  }
      
  $VCconn = Connect-VIServer $vCenter -User $vUsuario -Password $vPass > $null
       
  foreach ($vmName in $vmList) {get-vm $vmName| Select Name, @{N="Network"; e={ $_ | get-networkadapter|Select-Object @{N="Network";E={$_.NetworkName}}} }, @{N="IP Address";E={@($_.guest.IPAddress[0])}}|Export-Csv –path c:\scripts\vlans.csv –NoTypeInformation}
  

  Laurent,

  See below... should get what you want... If the virtual machine is not found that it only allows to correct the virtual computer name in the output.

  $vmlist = Get-Content C:\vmnames.csv  
  
  if (!(Get-PSSnapin -Name VMware.VimAutomation.Core -ErrorAction SilentlyContinue))  {
      Add-PSSnapin VMware*
      Set-PowerCLIConfiguration -DisplayDeprecationWarnings $false -DefaultVIServerMode multiple -InvalidCertificateAction Ignore -Scope Session -ProxyPolicy NoProxy -Confirm:$false | Out-Null
      [void](Get-PSSnapin VMWare.VimAutomation.Core -ErrorVariable getVmwareSnapinErr 2> $null)
      if ($getVmwareSnapinErr.Count -gt 0) {
          Add-PSSnapin VMware.VimAutomation.Core
      }
  }
  
  $VCconn = Connect-VIServer $vCenter -User $vUsuario -Password $vPass > $null
  $arrVMInfo = @()
  
  foreach ($vmName in $vmList) {
      $vm = get-vm $vmName -ErrorAction SilentlyContinue -ErrorVariable VMError | Select Name, @{N="Network";E={ $_ | get-networkadapter | Select-Object @{N="Network";E={$_.NetworkName}}} }, @{N="IPAddress";E={@($_.guest.IPAddress[0])}}
      if ($vm -eq $null) {
          $arrVMInfo += New-Object PSObject -Property @{ `
              Name=$vmName `
          }
      }
      else {
          $arrVMInfo += New-Object PSObject -Property @{ `
              "Name"=$vm.name; `
              "Network"=$vm.Network.Network; `
              "IP Address"=$vm.IPAddress `
          }
      }
  }
  $arrVMInfo | Select Name, Network, "IP Address" | Export-Csv "c:\scripts\vlans.csv" -NoTypeInformation
  

• How to create the user account using the command?

  How to create the user account using the command?

  Open cmd as administrator, and then type the following commands one after the other

  NET user / add program mypassword
  net localgroup administrators program / add
  net share concfg * C:------/ grant: program, complete
  This will create a user account with the name "Program" and the password "MonMotpasse".

  You can create the user name and password of your choice.

• Do we need an ODI agent is running using the command startscen

  Do we need a full installation of ODI (server and client) using the command Startscen or just the client installation should be enough. And so we need an ODI agent must be configured and running by using this command in StartScen
  
  Thank you

  Hello

  (1) just the customer enough.

  (2) an officer is not necessary to execute a command to startscen, but don't forget to configure the odiparams file, which is required.

  Cezar Santos
  [www.odiexperts.com]

• Adding users to a group of construction using the command line tool

  Hello
  Please forgive me if this is in the wrong category/forum, I can't seem to find one for Oracle Portal. I wonder if someone could help me with this issue please?
  
  I am trying to automate the adding users to a group of portal, entries already exist for users in the OID.
  With the help of the following ldapmodify command:
  
  ldapmodify h myhost.company.com Pei 389 - D cn = sleep w f /home/modify.ldif password
  
  where /home/modify.ldif has the following entries:-
  
  DN: cn = User1, cn = Users, dc is company, dc = com
  ChangeType: modify
  Add: orcldefaultprofilegroup
  orcldefaultprofilegroup: cn = groupname, cn = portal. 090112.174408.194907000, cn = groups, dc = company, dc = com
  
  DN: cn = User2, cn = Users, dc is company, dc = com
  ChangeType: modify
  Add: orcldefaultprofilegroup
  orcldefaultprofilegroup: cn = groupname, cn = portal. 090112.174408.194907000, cn = groups, dc = company, dc = com
  
  The ldapmodify script puts the specified group in the field "Default group" of the 'Edit portal user profile' page in the portal, which is fine. However it is not in fact add the user to the group. When I check the list of the members of the users group are not listed. Also the group is not listed under the existing users group membership "in the"Edit user"page. Also, when I try to connect to the portal as users, I get the error message "you are not authorized to perform this operation. (WWC-44131) "
  
  How can I add users to a group membership by using the command line tool?
  
  Thank you.
  
  M

  Your LDIF file must change the group entry and no input from the user.

  something like

  DN: cn = portal. 090112.174408.194907000, cn = groups, dc = company, dc = com
  ChangeType: modify
  Add: uniqueMember
  uniqueMember: cn = User1, cn = Users, dc is company, dc = com

• Does not open the files shared via the command run

  We use a server in our Organization and we can connect to this server using RDP. But when we try to access shared files and folders in this server via the command run in the client by entering the IP address of the server asks it enter network password, and we enter the right username and password (I'm sure that I entered the password and user name correct to 100%) it displays 'failed to connect '. ': unknown username or bad password ". and if we took the same user name and password via RDP it will easily connect without any error. Please give us the solution for this problem.

  Kind regards

  Vijay Kumar C.M.

  Left thread (files, folders, and online storage) for (web and networks).

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the TechNet forums.

  Please post your question in the TechNet forums: http://technet.microsoft.com/en-us/windowsserver/bb250589.aspx

  Thank you.

• First HP: help using the command CAS.solve (STRING1, STRING2) within a program

  Hello and hope you can help me with my problem!

  I write a somewhat complicated program (operating mode no case) who has a subroutine called STSOLVE where his entry is always a string from the main program that contains a formula as "'I' = 'V' / 'R', 'R'" and its goal is to replace all the variables contained in "" to the compatible standard CASE generated automatically variable (teiXX where XX is a unique number) and then use the command solve to assess this formula (say final temporary formula "tei1 = tei2 / ') tei3, tei3"). Before returning, he replaces the temporary variables, generated automatically with the original on the result, so the original formula will be sent back solved in the main program.

  My problem:

  It returns the result {UNDEF} or simply {} even in expressions that absolutely work if used with the command solve manually, in the main screen of calculators CASES when the CAS.solve command is used either! Even though I know that the entry of this order is correct according to the tutorials I've read in the forums, I can't work properly.

  I tried all methods of writing the order and I only managed to get a result when I wrote this:

  RPART1: = cas.expr (RPART1);

  RESLT: = case. Solve (RPART1, "tei2");

  .. .or RPART1 contains, say, the part 'tei1 = tei2/tei3' (NOT AS A STRING!) and "tei2" SHOULD be written as shown here, a chain, entered manually just for test (can be 'tei1' or 'tei3' too for this particular case). However, if I put "tei2" in RPART2 of local variable in the subroutine as a string and then pass this variable to the solve command, say:

  RPART1: = cas.expr (RPART1);

  RESLT: = case. Solve (RPART1, RPART2);  RPART2 contains the string "tei2", "tei1" or "tei3.

  Here again, I get a {} as a result!

  I tried so already a lot of things that I don't know exactly what mention here, but I hope I described the main situation enough to start detailed and of course, I'll give you any other information you might need to give me more help. I tried to paste the entire subroutine, or even the entire program, but I don't have any windows pc to connect the first HP and copy the program. I am writing from an Android Tablet and I should maybe type the everything here is not very easy, I will of course if you ask.

  Perhaps, I should also note that the generated vars tei1, tei2 etc. do not exist as variables in the calculator, but if I copy channels same as the program tries to run in the command CAS.solve and manually write in case screen (not a string of course) then they get solved without problems.

  Hope to get help and learn from you and I wish I could found more help about it online, but it seems very difficult and also all the tutorials I found on the cas.solve command in the programs did not work in my case!

  Andreas

  It works, or is this not the problem?

  CAS.solve ("tei1 = tei2/tei3", "tei2");

  I get output: {tei1 * tei3} which is correct.

• Problem: Using the command 'msg' with 'system Exec.vi.

  I try to write to the LabView code that takes advantage of the 'Exec.vi System '. For the moment, I have tried to use it to ping machines, return the command ipconfig and run through the code example that provides NEITHER.

  I would use the "msg" command used on Windows operating systems to send a message to several machines on our network at a time. Warning that we're about to update a program and that they should disconnect, things like that.

  I tried to use the command 'msg' LabView maintains return errors. I also wrote a quick command as follows file:

  @echo we
  CD c:\Windows\System32\
  Msg.exe /server:localhost * test

  When I run the batch of windows, it runs. When I launch from LabView (using the Exec.vi system), it fails.

  Potential quirks:

  I discovered in a different place under a machine to receive these messages they need to have a registry entry:

  "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server" and have a DWord value called "AllowRemoteRPC' = 1.

  Note that "/ Server: localhost" might be "/ server: anycomputer" and the "*" is used as a wildcard character that sends a message to anyone who is connected to this computer. Also note that the 'test' is the message to send.

  Any ideas why I'm having a problem?

  TL; Dr.: "System Exec.vi" does not have the command "msg". Why is this?

  
  

• Trying to enter gpedit.msc in the command run. Does not. Try to disable auto-start for usb devices.

  Hello. I read that I can go in gpedit.msc through the command run. I can't get in. He tells me this message: "Windows cannot find 'gpedit.msc'. Make sure you typed the name correctly, etc... »

  It is the process that a memory patriot employee was told in email: Ok then please try this.

  1. click on start, run, type Gpedit.msc in the Open box, and then click OK.

  2. under Computer Configuration, expand models of administration and then click System.

  3. in the settings pane, click on disable AutoPlay and then click Properties.

  4. click on active, then on all players in turn it off the AutoPlay box to disable AutoPlay on all drives.

  5. click OK to close the turn off AutoPlay Properties dialog box.

  6. restart the computer.

  Thanks for choosing Patriot Memory.

  The problem I have is I plug in some usb drives and I don't want to open. I want to do all of them open or no. They seem to now open fine, it's not autoplay'ing I want to do.

  Thank you.

  GPEDIT is functional on windows XP Pro, xp family, that it will not work... In addition,

  If the USB functions are a problem, either upgrade the software of the chipset, either install the

  youre MB mfg software (intel, amd, etc.), the "chipset installation utility" has drivers,.

  software & programs of the operating system for its proper use. If you are running XP pro, & have installed chipset

  utility, then the procedure to run GPEDIT will be here: http://social.technet.microsoft.com/Search/en-US?query=GPEDIT&ac=3

• How to use the command shutdown in vista?

  I used the shutdown command to make sure that the computer is turned off at some point in XP, but I just wanted to put my own computer to shut down after accidentally booting to Vista Home in order to download a large file while I was at work.

  I tried shutdown-s t 9000, which should have set a time limit of two and a half hours, but he gave me the help screen message.
  I saw that the main difference is that dashes had been changed to slashes, but "shutdown /s /t 9000" also failed.

  What is the correct syntax to use the command? I confirmed that 'shutdown-s-t 9000' works very well in my XP virtual machine, if that is the new syntax to accomplish the same thing with Vista? I tried "run as administrator" to the command-line nothing helps.

  Hello
  It is the command to shut down the computer in Vista.
  SHUTDOWN [/s] [t / xxx]
   
  xxx/t:  The value of the timeout prior to xxx seconds. (The valid range is 0-600, with a default value of 30. The use of / t xxx implies the /f option.
   
  /s: Shut down the computer.
   
  /f: Force running applications to close without prior notice to users. (/ f is automatically defined when used in conjunction with xxx/t).

• The application has failed to start because its side-by-side configuration is incorrect. See the application event log or use the command-line sxstrace.exe for more details

  Hello

  I can t open Google Earth or Microsoft Office programs because I get this message - the application could not start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe for more details.

  A few days ago I could open all what programs. I put t know what is the problem.

  I did sxstrace and that's what I have-

  =================
  Launch the activation context generation.
  Input parameter:
  Flags = 0
  ProcessorArchitecture = Wow32
  CultureFallBacks = en-US; en
  ManifestPath = C:\Program Files (x 86) \Google\Google Earth\client\googleearth.exe
  AssemblyDirectory = C:\Program Files (x 86) \Google\Google Earth\client\
  Application configuration file =
  -----------------
  INFO: File analysis shows C:\Program Files (x 86) \Google\Google Earth\client\googleearth.exe.
  INFO: Manifest definition identity is (null).
  INFO: Reference: Microsoft.VC80.CRT, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.4053"
  INFO: Resolving reference Microsoft.VC80.CRT, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.4053".
  INFO: Resolving reference for ProcessorArchitecture WOW64.
  INFO: Resolving reference for the neutral culture.
  INFO: Application binding policy.
  INFO: No found publisher policy.
  INFO: No redirect political connection is found.
  INFO: Start the detection of assembly.
  INFO: Can't find the assembly in WinSxS.
  NEWS: Try to detect manifest to C:\Windows\assembly\GAC_32\Microsoft.VC80.CRT\8.0.50727.4053__1fc8b3b9a1e18e3b\Microsoft.VC80.CRT.DLL.
  INFO: Found no manifesto for the neutral culture.
  INFO: End detection of assembly.
  INFO: Resolving reference for ProcessorArchitecture x 86.
  INFO: Resolving reference for the neutral culture.
  INFO: Application binding policy.
  NEWS: Control strategy of the Publisher C:\Windows\WinSxS\manifests\x86_policy.8.0.microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.5592_none_517247830f45081d.manifest
  INFO: Start the detection of assembly.
  INFO: End detection of assembly.
  ERROR: Activation context generation failed.
  End activation context generation.

  Help, please!

  This type of error can be caused if the Visual C++ library runtime components are missing or because of a third-party software.

  Follow the steps below:
   
  Method 1:
  If the problem is caused by the lack of Visual C++ libraries, you can download and install the Runtime components of Visual C++ libraries from the link below:
   
  This error can occur when the Microsoft .NET Framework installation on the computer is damaged or is missing.

  Try it out below step to reinstall and repair installation of Microsoft .NET Framework on the computer, then check if you can install the software.

  (a) click the Start button, select Control Panel, click programs and then click on 'Turn Windows has or not.' If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) search for Microsoft .NET framework 3.5.1 uncheck, click OK and restart the computer.

  (c) after the reboot, open again "Turn Windows features on or off" and place a check next to Microsoft .NET framework 3.5.1 and restart the computer.

  Step 2

  If the previous step fails, then I suggest that you manually download and install Microsoft Visual C++ 2005 and 2008 Redistributable Package and check to see if you can install the software.

  In programs and features, you do not show that you have installed Microsoft Visual C++ 2005 Redistributable and Microsoft Visual C++ 2008 Redistributable? If this is not the case, download the links here.
   
  Package redistributable Visual C++ 2005 (X 86)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=32BC1BEE-A3F9-4C13-9C99-220B62A191EE&displaylang=en
   
  Visual C++ 2005 (x 64) redistributable package manager
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=eb4ebe2d-33c0-4A47-9dd4-b9a6d7bd44da&displaylang=en

  Package redistributable Microsoft Visual C++ 2008 (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF&displaylang=en

  Package redistributable Visual C++ 2008 SP1 (x 64)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

  I hope this helps.

• How to rename a directory by using the command prompt

  How can I rename a directory using the command prompt?  Say I want to change c:\Users\User c:\users\user utilisateur\Mes Documents documents.  How can I do this?

  I looked in Google.  Here's what I found.

  G:\data>mkdir dir1
  G:\data>dir /b
  dir1
  G:\data>rename dir1 dir2
  G:\data>dir /b
  dir2
  G:\data>What would I write for the data? And what would I write for b?
  

  C:\docs>ren c:\docs\1.txt 2.txt
  C:\docs>dir /b
  2.txtPlease give me an example.Rod Computer
  

  OK, I fixed it.  I did go in safe mode, go to documents, right-click on the file, select Properties, security, advanced, owner and change the owner.  And that's all.

  They don't call me computer Rod for nothing!

  Thank you