method in class amimpl

Similar Questions

• Access the method of class (impl) view of bean object (or vice versa)

  Halo everybody, I use JDeveloper 11.1.2.1.0
  
  I use a UsersViewImpl class with a method that update the table as below.
  
  public void resetEmployeeSearch() {}
  removeApplyViewCriteriaName ("viewCriteria");
  executeQuery();
  }
  
  and I have a UserBean class with a method that reset the values of fields of research such as below.
  
  {} public void resetInput (ActionEvent actionEvent)
  ........ RichInputText = entry...
  input.setValue("");
  AdfFacesContext.getCurrentInstance () .addPartialTarget (searchForm);
  ........
  }
  
  
  I want to implement that, once I press a button, the two methods are called.
  
  I tried to call method of bean using vs UsersViewImpl = new UsersViewImpl... who does not and will not work.
  I've read about something as ViewObject vo = am.findViewObject ("DeptView1") but I duno how to use because I can't have a good example.
  
  Any suggestion on access to the method of class (impl) view of bean object (or vice versa)?
  Or is it possible to combine the two method in the same class?
  
  
  Thanks :(

  and then create a link to this effect in your page. > Sorry, dun get this part. You create the link from the button to the UsersViewImpl method?
  The code below should be method (binding) in UsersViewImpl, right?
  OperationBinding op = ((DCBindingContainer) BindingContext.getCurrent () .getCurrentBindingsEntry ()) .getOperationBinding ();
  op. Execute();

  What I meant to say call this code your method of bean... this way you can call both the logic in your bean and the method of VO together!

• methods of class in another class

  Hello

  I would like to know is there is another way than I do with the embeded classes in another:

  ex I have a device class that hosts a class Com (RS - 232...)

  what I do I want to setup a com of a device is get com device object then appliing change the COM with com whan methods

  is there a way to apply the com method directly to the device?  I thought to get instr, method in the Com class so unbundle is directly

  but I don't think it's a good thing...

  Is there something to do with the class friend or community?

  See the attached .jpg

  Concerning

  Tinnitus

  In the photo, I assume you mean associations and design of composition model.

  You can simply implement accessor screws in the Instr.class to get/set the Com.class. Using a design of val, you would call get the Com.class, regardless of the methods on the Com.class and then put it back in the Set accessor: Inst.class.SetCom (Com).

  Using a design by reference, you don't need the Setter and can set the ReadOnly property of Com of Instr.class. But then you do the sequencing (program flow) by the single thread of error.

  Felix

• Method in class java.lang.Object [] business need not be declared as final

  Hello

  I'm deploying a Java 7. EAR to Weblogic 12.1.3 and I get the following error

  The track repeats four times, changing the method name that is highlighted in bold: wait, getClass, notify, and notifyAll

  Can someone explain to me what was going on? The stack trace shows nothing else. There seems to be something to do with EJB.

  This post is the only related information I ve got EJB 3.0 and jndi lookup (simple question) , but it suggests to use @Remote worthless. That s not my case. This app has worked before with @Remote pointing to a Remote Interface

  Any help much appreciated

  Thank you

  weblogic.ejb.container.compliance.ComplianceException: method of business [wait / getClass / notify / notifyAll] in class java.lang.Object must not be declared as final

  at weblogic.ejb.container.compliance.Ejb30SessionBeanClassChecker.validateBusinessMethod(Ejb30SessionBeanClassChecker.java:274)

  at weblogic.ejb.container.compliance.Ejb30SessionBeanClassChecker.checkBusinessMethods(Ejb30SessionBeanClassChecker.java:229)

  at sun.reflect.GeneratedMethodAccessor232.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

  at java.lang.reflect.Method.invoke(Method.java:497)

  at weblogic.ejb.container.compliance.EJBComplianceChecker.check(EJBComplianceChecker.java:100)

  at weblogic.ejb.container.compliance.EJBComplianceChecker.check(EJBComplianceChecker.java:90)

  at weblogic.ejb.container.compliance.EJBComplianceChecker.checkDeploymentInfo(EJBComplianceChecker.java:81)

  at weblogic.ejb.container.ejbc.EJBCompiler.doCompile(EJBCompiler.java:172)

  at weblogic.ejb.container.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:346)

  at weblogic.ejb.container.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:314)

  at weblogic.ejb.container.deployer.EJBDeployer.compileJar(EJBDeployer.java:429)

  at weblogic.ejb.container.deployer.EJBDeployer.compileIfNecessary(EJBDeployer.java:355)

  at weblogic.ejb.container.deployer.EJBDeployer.prepare(EJBDeployer.java:723)

  at weblogic.ejb.container.deployer.EjbModuleExtension.postPrepare(EjbModuleExtension.java:98)

  to weblogic.application.internal.ExtensibleModuleWrapper$ PrepareStateChange.next (ExtensibleModuleWrapper.java:297)

  to weblogic.application.internal.ExtensibleModuleWrapper$ PrepareStateChange.next (ExtensibleModuleWrapper.java:285)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:42)

  at weblogic.application.internal.ExtensibleModuleWrapper.prepare(ExtensibleModuleWrapper.java:109)

  at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:100)

  to weblogic.application.internal.flow.ModuleStateDriver$ 1.next(ModuleStateDriver.java:175)

  to weblogic.application.internal.flow.ModuleStateDriver$ 1.next(ModuleStateDriver.java:170)

  to weblogic.application.utils.StateMachineDriver$ ParallelChange.run (StateMachineDriver.java:80)

  at weblogic.work.ContextWrap.run(ContextWrap.java:40)

  to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:548)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:311)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:263)

  I thought about it

  In one of my EBJ´s @Local and @Remote have been pointing to the same Interface

  In any case, the error does not specify which EJB is a failure. He says nothing, really

• AM how to call the methods of class Impl EO

  Hello world

  I try to display database data in a table, and I need to add a transitional and calculated attribute.

  So I created an EO, I added a transitional attribute, and now I need to create the method that calculates its value.

  I created this method of AOS.

  Back to EO Impl class, I want to call this method in the Get accessor of my transitional attribute.

  To call this AM method in the EO Impl category, I have to get the AM, and I don't know how to do it. Because I'm used to getting the pageContext controller AM.

  I googled and found that I don't need to create the method in the AM, I found that I just have to code directly in the Get accessor.

  But again, to calculate my transitional attribute, I have need for some queries and for that I need OADBTransaction, which means once again, I need to get the AM in the Impl EO class.

  I'm confused, I don't know how to do, if anyone can help please

  Thank you

  Kind regards

  Afaf

  If you derive the value based on the query, it would be better to do it in a single query.

  If you can stick the main request and the subquery (s) here, I take a look.

  If this is not possible using the query, you can get the oaDBTransaction like below in the VO RowImpl.

  Import oracle.apps.fnd.framework.OAApplicationModule;

          OAApplicationModule appModule = (OAApplicationModule)this.getApplicationModule();
          appModule.getOADBTransaction()
  

  See you soon

  AJ

• SaveAs method of class workbook failed to fIntersectionCheckEx

  We are migrating to FDM and HFM 9.3.1 to 11.1.2.1. Due to performance issues that we had previously lived with the FDM multiload feature, we used UD5 and UD6 and customization of the adapter to load the year and period. To take into account the 'extra' dimensions, we also use custom event scripts, view reports, etc... The intersection integrated verification is disabled. The AftValidate script contains our intersection check custom and follows below. During the validation phase is executed on the web client, the following error message appears in the log:
  
  * FdmFM11XG5E Runtime Error Log entry begin [2011-10-13-12: 03:15] *.
  -------------------------------------------------------------
  Error:
  Code of... 1004
  Description... The Workbook class SaveAs method failure
  Process... clsHPDataAccess.fIntersectionCheckEx
  Component... C:\FDMData\fdm-HFM-adapter-V25481-01\FinancialDataManagement\FM11X-G5-E_1005\AdapterComponents\fdmFM11xG5E\fdmFM11XG5E.dll
  Version... 145
  
  Identification:
  User... larryr
  Name of the computer... SVRHYPFDMV103
  
  Connection of FINANCIAL MANAGEMENT:
  Name of the application...
  Name of the cluster...
  Field...
  Connect status... Open connection
  
  
  * Start the journal entry for the Runtime Error FDM [2011-10-13 12:03:15] *.
  -------------------------------------------------------------
  ERROR:
  Code...-2146233088
  Description... The Workbook class SaveAs method failure
  Online: 59
  Process... clsEventHandler.PobjAPI_AftValidate
  The component... upsWObjEventHandlerDM
  Version.......................................... 1112
  Thread........................................... 4828
  
  IDENTIFICATION:
  User............................................. larryr
  Name of the computer... SVRHYPFDMV103
  App Name......................................... SAPHFM
  Client App....................................... WebClient
  
  CONNECTION:
  Provider......................................... SQLOLEDB
  Server data... svrsql105
  Name of the database... SAPHFM
  Trust connect... Fake
  Connect status... Open connection
  
  GLOBALS:
  Location......................................... AHEL_F1
  Location ID... 752
  Location Seg... 6
  Category......................................... FctAug
  ID of the category... 16
  Period........................................... M12 - FY12
  Period ID........................................ 30/04/2012
  POV Local........................................ Fake
  Language......................................... 1033
  User Level....................................... 1
  All Partitions... True
  Is Auditor....................................... Fake
  
  
  * Start the journal entry for the Runtime Error FDM [2011-10-13 12:03:15] *.
  -------------------------------------------------------------
  ERROR:
  Code............................................. 440
  Description... Automation error
  Process... clsValidationMgr.fValidate
  The component... upsWObjectsDM
  Version.......................................... 1112
  Thread........................................... 4828
  
  IDENTIFICATION:
  User............................................. larryr
  Name of the computer... SVRHYPFDMV103
  App Name......................................... SAPHFM
  Client App....................................... WebClient
  
  CONNECTION:
  Provider......................................... SQLOLEDB
  Server data... svrsql105
  Name of the database... SAPHFM
  Trust connect... Fake
  Connect status... Open connection
  
  GLOBALS:
  Location......................................... AHEL_F1
  Location ID... 752
  Location Seg... 6
  Category......................................... FctAug
  ID of the category... 16
  Period........................................... M12 - FY12
  Period ID........................................ 30/04/2012
  POV Local........................................ Fake
  Language......................................... 1033
  User Level....................................... 1
  All Partitions... True
  Is Auditor....................................... Fake
  
  Custom control intersection via AftValidate. Line 59 is fIntersectionCheckEx:
  

  Sub AftValidate(strLoc, strCat, strPer, lngProcState)
  '------------------------------------------------------------------
  'UpStream TB EVENT Script
  'Purpose:   Perform custom intersection check - customized for multiple periods
  '------------------------------------------------------------------
  Dim strTableName, strSQL'               Query variables
  Dim strPerYear, strPerMonth'          Target HFM Year & Month
  Dim strCatKey, strLocKey'               ID of POV Category & Location
  Dim strErr, strHTMFile'                    Error information
  Dim objHWReturn'                         Return object for intersection validation
  Dim objPeriod'                              Period object
  Dim fso'                                   File system object
  Dim rs'                                        Recordset containing unique HFM Target intersections
  Dim vaData'                                   Array containing unique HFM Target intersections
  
  ' Initialize Block Processor For HFM connection
  Dim BlOCKPROC
  Set BlOCKPROC = CreateObject("upsWBlockProcessorDM.clsBlockProcessor")
  BlOCKPROC.Initialize API, SCRIPTENG
  
  ' Call the Connect Action for the active integration block
  Set API.IntBlockMgr.IntegrationMgr.PobjIntegrate = BlOCKPROC.ActConnect("CheckDims")
  If API.IntBlockMgr.IntegrationMgr.PobjIntegrate.intResult Then' Connection is open 
       'Get Target information
       strLocKey = CStr(RES.PlngLocKey)
       strPerKey = CStr(RES.PdtePerKey)
       strCatKey = CStr(RES.PlngCatKey)
       Set objPeriod = API.POVMgr.fPeriodKey(strPer)
       strPerYear = objPeriod.strTargetYear
       strPerMonth = objPeriod.strTarget
       Set objPeriod = Nothing
       strTableName = "tDataSeg" & API.POVMgr.fGetLocationSegment(strLocKey)' Get tDataSeg number for location
       strBaseName = strLoc & "_" & strCat & "_" & strPerMonth & "_" & strPerYear
       strLogsDir = DW.Connection.PstrDirOutbox & "\Logs\"
       strFile = strLogsDir & strBaseName & ".fmv"
  
       ' Create the SQL to pull the validation records
       ' Do not Validate the Keystone Custom2 records since their "parent" Classic Custom2 records are validated
       strSQL = "SELECT DISTINCT EntityX, PartitionKey, CatKey, PeriodKey, DataView, AccountX, ICPX, UD1X, UD2X, UD3X, UD4X," & _
                                       " '' AS UD5X, '' AS UD6X, '' AS UD7X, '' AS UD8X, '' AS UD9X, '' AS UD10X, '' AS UD11X," & _
                                     " '' AS UD12X, '' AS UD13X, '' AS UD14X, '' AS UD15X, '' AS UD16X, '' AS UD17X, '' AS UD18X," & _
                                     " '' AS UD19X, '' AS UD20X, '' AS Amt " & _
                  "FROM " &strTableName& " WITH (NOLOCK) " & _
                  "WHERE CatKey=" &strCatKey& " AND PeriodKey='" &strPerKey& "' AND PartitionKey=" &strLocKey
       'Validate all records in the result set
       Set rs = DW.DataAccess.farsFireHose(strSQL, False)
       With rs
            If Not .EOF Then' Create the array to pass to intersection checking
                 vaData = .GetRows(.RecordCount)
                 Set objHWReturn = API.IntBlockMgr.IntegrationMgr.PobjIntegrate.varCon.fIntersectionCheckEx(vaData, CStr(strCat), CStr(strPerMonth), CStr(strPerYear), "YTD", "<Entity Currency>", CStr(strFile), "FM Account", "FM Entity", "ICP", "Custom1", "Custom2", "Custom3", "Custom4", 15, 9, 2)
                 If objHWReturn.PblnIsErr Then
                      RES.PstrActionValue = objHWReturn.PstrErrFile
                      RES.PlngActionType = 4' Display HTML file on web client
                      API.MaintenanceMgr.mProcessLog strLoc, strCat, strPer, 2, False, "Custom Intersection Validation Error:  Error creating validation array", Now()
                 Else' Delete the html header file for the error free validation
                      strHTMFile = strLogsDir & strBaseName & ".htm"
                      Set fso = CreateObject("Scripting.FileSystemObject")
                      If fso.FileExists(strHTMFile) Then fso.DeleteFile strHTMFile, True
                      Set fso = Nothing
                 End If
                 Set objHWReturn = Nothing
            Else
                 strErr = "AftValidate Event Script error:  No data for intersection check" & vbCrLf
                 RES.PstrActionValue = strErr & "You must re-run the Import before running the Validate again"
                 RES.PlngActionType = 2' Display the error string
            End If
            .Close
       End With
       Set rs = Nothing
  End If
  
  'Destroy the remaining objects
  Set API.IntBlockMgr.IntegrationMgr.PobjIntegrate = Nothing
  Set BlOCKPROC = Nothing
  
  End Sub

  Search for the app to "Excel" readme that may address your question.

• Call methods between Classes

  There's a week again to ACE
  
  I am trying to create a "FrontController" like that in Cairgnorm, I won't use Cairgnorm because I don't have the time to learn this method right now. in any case, I want to spend my events to the FrontController and have that runs the appropriate method. All the examples I've seen use methods in the FrontController class. This will quickly become a mess, and I would break the code into separate logical categories.
  
  So my question is, how do you instantiate one method from another class?
  
  FrontClass.as
  public class FrontClass
  {
  addEventListener ("listenFor", this)
  }
  
  DoThis.as
  public class doubts
  {
  public void doubts (event): void {}
  }
  
  Thank you!!

  Hi I suggest, to have the FrontClass access to the instance of the class of doubts.

  See code below:

  public class FrontClass

  This var: doubts;
  {

  function FrontClass() {}
  this.addEventListener ("listenFor", doThis.doThis)
  }
  }

• Cannot get the methods in AMimpl

  Hello

  I did an AMimpl.java class and added a method inside. But the thing is when I open interface Client to change, I see not all methods in the shuttle.

  I tried to make class AMimpl.java in two VO AM and AM of EO.

  I want to do this.

  Blog of Ashish Awasthi (Jdev/ADF): SQL to run in an ADF Application using DBTransaction & the JDBC data source query

  So I used this

  Blog of Ashish Awasthi (Jdev/ADF): ADF Basics: how to call methods of the bean model layer managed (practices reda...

  ExecuteQuery() method make sure example of Ashish public instead of protected, and you will be able to export them to the Client interface

• Simple enough, but calling one method from another class

  Hi all
  I know it's pretty simple, even though I do not see where I am going wrong for some reason any. Basically, I have a class that extends JPanel but when I try to call one of its methods in my main class I get an error. The code (I hope) is:
  
  Main.Java

  import java.awt.BorderLayout;
  // ...
  import javax.swing.UIManager;
  
  public class Main extends JFrame implements ActionListener {
  
       JFrame frame;
       public static JPanel statusBar;
  
       public Main() {
  
            // ...
  
            // Add a status bar
            statusBar = new StatusBar();
            mainPanel.add( statusBar, BorderLayout.SOUTH );
  
            setContentPane( mainPanel );
            // ...
       }
  
       // ...
  
       public static void setStatusBarText( String s ) {
            statusBar.setStatusText("Test");
       }
  
       // ...
  }

  StatusBar.java

  import java.awt.Color;
  // ...
  import javax.swing.SwingConstants;
  
  public class StatusBar extends JPanel {
  
       private int barWidth;
       private static JLabel status;
  
       public StatusBar() {
            super();
            //barWidth = Main.getProgramWidth();
            //setPreferredSize( new Dimension(barWidth,22) );
            setLayout( new FlowLayout( FlowLayout.LEADING ) );
            setBorder( BorderFactory.createMatteBorder(1, 0, 0, 0, new Color(160,160,160) ) );
  
            status = new JLabel("Test", SwingConstants.LEFT);
            //status.setVerticalAlignment( SwingConstants.CENTER );
            add( status );
       }
  
       protected void setStatusText( String s ) {
            status.setText( s );
            revalidate();
       }
  }

  The "statusBar.setStatusText ("Test")"; call in the main class file does not work and I get the error:
  
  >
  cannot find symbol
  symbol: setStatusText (java.lang.String) method
  Location: class javax.swing.JPanel
  statusBar.setStatusText ("Test");
  >
  
  Any ideas what I am doing wrong? I created an instance of the class called status bar StatusBar, can I use it to call the setStatusText() method (via statusBar.setStatusText ()) I thought everything is OK, then it does not work? Even if there is an easier way to do what I want to achieve (i.e. to update a JLabel since the 'central' main class file instead of setting the JLabel static and have all classes call him directly), I'd be glad to know where I am going wrong here nevertheless.
  
  Thank you very much
  Tristan

       public static JPanel statusBar;
  
       public static void setStatusBarText( String s ) {
            statusBar.setStatusText("Test");
       }
  

  >
  cannot find symbol
  symbol: setStatusText (java.lang.String) method
  Location: class javax.swing.JPanel
  statusBar.setStatusText ("Test");
  >

  The type of variable statusBar is JPanel. That's all the compiler takes into account. It is not relevant that at a certain point in the program, the type of the object pointed to by this variable is a subclass of JPanel (because at another time, it might be an instance of another subclass or JPanel itself.

• Cannot write via command Ref to class VI

  LV2013 SP1, Win7

  I'm an old LabVIEW and OOP in other languages, but fairly new to LVOOP.

  This code worked fine until I put the part of the user interface in a CLASS.

  I'm trying to read a file (PDM) and complete a series of controls WITHOUT KNOWING THEIR DATA TYPES.

  Simply pass an array of the refs control to a VI and tell more later to save to a file.  The VI built the control label TDMS property names and gets their values as variants, able to write to a file.

  During playback, the names in the file are matched to control labels and controls MUST BE filled.

  As I said, it worked fine until I put it in a CLASS.

  Here's the user interface in question - there are four controls that I wish to backup/restore.

  It is a category.

  I collect four references and to a method of CLASS PARENT

  

  Here is the method of the PARENT class - it's simply the arbiters of control to a method without class, who remembers them via a id 'signature'

  

  Here is the part READING this property Storage Manager.

  All the properties of the file have been read in the tables.  Here we corresponds to a given control name with the name of the file and set the value of control once we find a matching name.

  

  But it does not work.  The value of the control is not changed.

  Here is an extract from log debugging:

  

  I KNOW that the Ref of the order is correct, because the NAME who has logged from the REF CONTROL itself.  The names are not stored.

  The VALUE in the debug log from the file.

  There is no error reported.

  But just what is the control on the Panel is NOT affected.

  The setting of the green label text color is just an attempt to debug - it does NOT affect the control either.

  Is there some kind of security "Shield" which prevents me from writing to a control inside a class?

  Looks like which should cause an error, as appropriate.

  Yet once, it worked very well until the classes participated...

  Something else I'm missing?

  I guess I can:

  1... open a separate reference (and then close) just to get the size of the screen.

  2... spend a REF for the SECONDARY in the class, and have the method of the user interface fit into the secondary.

• Confused about the use of accessors with classes.

  With a new assignment thought, it would be appropriate to increase the use of labview OO features. In my case, I'm trying to use a class to contain a bunch of different calculations. The calculations require multiple entries to finish so I built a control to take care of these data. My plan was to build separate methods for each calculation. This will allow to easily add new calculations and considering that many calculations depend on preliminary calculations seem to be an excellent opportunity to learn a new part of labview.

  My problem is to find an elegant way to complete this great control; I believe that I must write accessor vi to allow outside access to the objects. I don't know if there should be one vi for EACH parameter accessor, or if I can access these items in a cluster.

  I can only relate to the use of get / set in .NET and usually I would write one for each variable that I have access to. I'm not sure how to proceed in LabView. Any ideas would be great.

  I enclose a few images. One showing just a sumple calculation and one of my ctl. Still, my main question is what is the best way to populate the items in this list.

  -Chris

  Since there is no such thing in LVOOP as public members of class (and thank God / NOR) you must always provide accessors (getters/setters) to join the data members of the class outside of the classroom.

  Inside the method of class VI, there is no need for them since you can reach directly from the wire with bundle/unbundle (like photos).

  I've implemented a similar class that performs calculations and I chose to use the recursive calls to deal with the problem of some variables must be calculated before the others.

  I'm a member of the VI class called GetCalculatedVariable.vi which takes the name of the variable to calculate input (like typedefed enum).
  Inside of this VI have a structure dealing with a box for each variable that can be calculated.

  The inside of the box, I define the calculation, and if I ever need another variable, I here call GetCalculatedVariable.vi recursively.

  In addition, I also have a CalcBuffer so I don't have to call GetCalculatedVariable.vi more than once for each variable.

  The class also has a GetMeasuredVariable.vi which also uses the recursion in the same way, but works on my measurement files instead.

  The advantage is that my application code gets very clean because it contains only a single Subvi callto obtain and use any calculated variable.

  I also have a GetCalculatedVariables that takes an VariableNames array and returns an array of values.

  I hope this helps...

• Appeal of c# classes for LabVIEW instruments

  The c# programmers here in my company have developed a great c# class that contains all of the interfaces of instrument for our various test stations.  Instead of re - write all this LabVIEW code that would cause a maintainability nightmare, I want to use the class that they have created (and as an asset, tested and verified).

  I can get to all different methods, etc. so, using the .NET / LabVIEW connectivity is not a problem.  In addition, it's a matter of how exactly should I create the interop so that it is usable for our effective use of LabVIEW programmers.

  A quick description of the structure of language c#, using the Switch class for example:

  Upper level of the class has all the features of base common to all switches, and then as is normal, specific instruments have common methods in their breast and a few additional methods specific to this model.

  They use the Ifactory model for all this.

  Now I can be reading too far into this, or perhaps not far enough.

  I know that when we create classes in BT we can do a general change of class, and then have children of this class of specific instruments. In my case, I duplicated their structure and I all methods of higher level in a class of 'Switch', then a folder of children of switch has classes for each of the classes of children. I then put in place so that the child class inherits from the parent for each child.  All this with the intention of using dynamic dispatching.

  My first question is: who don't already be managed in c# code?  By calling the method of the parent class, wouldn't not on the c# code to take the correct child?  Or is it since I was using just the class, but not all of the air capacity of c# (I'm NOT an expert in c# if it isn't obvious now) I'm having to manage the dynamic send in LabVIEW?

  How exactly should I do after I have integrated LV class and configuration in pallets for future programmers? It's their programming, they know that they need a function from a specific switch, so they put that and by plugging in this interface of method, the class switch, it automatically performs the dynamic send call in the class (in fact, I typed, it made sense).  What I was wondering, is that we are so concerned about the adaptability / changability; We have a proverb which says that if Exchange you an equivalent switch in, it should work without having to re - write the code.  So of course, I am writing for this purpose.  Again, as I write this, I find to say to me, 'If you must use a particular method to pass type, because it is what is needed, then would still have an equivalent switch, with this same ability of method.

  I know I have rambled on this, but these are the roadblocks which my mind throw out there that I have create the method interfaces.

  Did anyone done something like this before? Is there an example that you could send me or tell me?  I can't believe I'm the first to try to take advantage of c# code that has already been written. I believe that I understand the nuances of make it right.

  Thanks for reading and potentially for helping me through this. It's very appreciated.

  Dan

  You could still do the objects accessible .NET via pallets is to put them in a merger of VI - one that its content when it falls from a palette on the block diagram. You probably wouldn't want to do it for every single method, but if make you at least the major top-level classes or the available constructors in this way (or property or call node for a static class), you're going to do the hard part (finding the right assembly and class) easy.

• is not a class or Namespace error

  QDir dir;
  QString appFolder(QDir::currentPath());)
  QString dirName = appFolder + "/ app/native/assets/img";
  dir. CD (dirname);

  List of QStringList = dir::entryList(); error
  foreach (const QString & str, list)
  {
  showDialog (str, str);

  }

  Hi all, creates the red line "dir" is not a class or namespace error.

   

  Any thoughts on why this phenomenon occur? 0o0o
  

  : is to access static methods or class. Try:
  dir.entryList ();

• Question of the main application class

  Hey people out there!

  A happy Friday to all just a quick question. The class that contains the main Sub public static in the BlackBerry application method, this class should be one that extends UiApplication or can the main method call the class that is responsible for this?

  Thank you!

  Schalk

  You can try something like that.

  class Test
  {
      public static void main(String args[])
      {
          Xyz xyz = new Xyz();
          xyz.enterEventDispatcher();
      }
  }
  ---------------------
  
  class Xyz extends UiApplication
  {
      Xyz()
      {
          pushScreen(new MainScreen());
      }
  }
  

• Where and how the main method should be defined

  Hi all
  
  I am new to Java and learning of the http://docs.oracle.com.
  Can someone help me underneath program where and how define a main method.
  
  public enum {costume
  DIAMONDS,
  CLUBS,
  HEARTS,
  SPADES
  }
  
  public enum {rank
  TWO, THREE, FOUR, FIVE, SIX, SEVEN,
  EIGHT, NINE, TEN, JACK, QUEEN, KING, ACE
  }
  
  public class {Card3
  private rank final rank.
  final civil suit;
  
  Public Card3 (highest rank, suit suit) {}
  This.Rank = grade;
  This.suit = suit;
  }
  
  public getSuit() {} costume
  return of costume;
  }
  
  {public getRank() rank
  return of rank;
  }
  
  public String toString() {}
  return rank + 'of' + costume;
  }
  }
  
  MPort Java.util;
  
  public class Deck3 {}
  private static Card3 [] cards = Card3 News [52];
  public Deck3() {}
  int i = 0;
  {for (costume costume: {Suit.values ())}
  {for (the highest ranking: {Rank.values ())}
  maps [i ++] = new Card3 (rank, suit);
  }
  }
  }
  }
  
  Thank you
  Rambeau

  Hello

  When you are developing a Java application, that you must only have a class with a Main method, other classes do not need that method, the purpose of this methos is that it defines the beginning of your program, look at this link, it is an example and this explains also the Main method:

   http://docs.oracle.com/javase/tutorial/getStarted/application/index.html 
  

  Concerning
  Carlos