Confused about the use of accessors with classes.

Similar Questions

• I have a power shot sx HS 40 & need information about the use of filters with this camera? Thank you ~.

  I have a power shot sx 40 & would like information on the use of filters with this device?

  Thank you ~.

  Hi Rainlily,

  You will need the # model Canon adapter filter f-DC67A to use filters on this camera, which costs about $25.00. Bower makes one for about $9.00 available in B & H and Bower products work well with the Canon. This adapter uses 67 mm filters. If you have not yet all filters, I would recommend Hoya or Tiffen filters as they are of high quality at reasonable prices. Do not get the expensive filters because in general they can cause color casts that may be difficult to view the process on. Have fun!

  Steve M.

• Question about the use of foil with HARD drive

  Hi all
  Please can someone tell me what a sheet of aluminum covering the hard drive for laptop for?
  I guessed that it's temperature.
  But some information I found says the opposite.

  "
  My Seagate hard drive hot enough during long extensions CD writing/Back Up...
  Everyone recommends the use
  the foil of Food Grade to dissipiate heat?
  In my experience, things hot wraped in paper Aluminium gets cooled quite quickly... »

  My old man was a problem of partition table, I got a new and reluctant to cover it with a sheet.

  What do you think about this?

  Sombatk

  Hello

  I have replaced several hard drives on some laptops but I have never used any further papers of aluminum and I have no problem with the temperature.
  In my opinion, it is not necessary.
  The cooling modules must be able to manage the temperature of the HARD drive.

• Question about the use of sharing with several pools of resources

  The design of our environment vSphere has several pools of resources at the root, each series 'Normal' value stocks, and if the resources tab shows that each resource pool '% of the shares' value of 3%.

  However, some resource pools have 50 + VM and others have only 1 or 2.

  Is someone can confirm that this is wrong and that should have a pool of resources with more than VM have a proportionately higher value of action?  This assumes of course that all the resource pools are of same priority (be they makes me wonder why we use pools of resources at all... but that's another issue)

  The reason why I ask is that the 'worst deal allocation' is for memory and CPU is much higher on the pools of resources with multiple virtual machines, so it's obviously something in the algorithm of resource allocation that is aware of the total number of virtual machines in the pools. Resource pools are defined as extensible and I'm assuming that this "worst case allocation" would go down considerably as the cluster approached his ability, but I wanted to check before starting to change things...

  Welcome to the Forums - you are right to worry about this situation - check on http://www.yellow-bricks.com/2010/02/22/the-resource-pool-priority-pie-paradox/ for description - but don't worry Duncan also has a solution - http://www.yellow-bricks.com/2010/02/24/custom-shares-on-a-resource-pools-scripted/

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Confusion about the use of the tables [was: tables]

  I was told, at some point by someone, that the new web site design uses no tables. I'm so confused that I just read in the Help Guide of Dreamweaver Reference Guide, Chapter 5 page layout and Design, there is a whole section for tables. Many help sites, I was told that my site does not even because it is built in the tables. I built it using the ancient DW in 2002. I don't know which version, but the most recent version was Dreamweaver 4 back then. I am trying the trial of 2015, making many tutorials to learn the latest that has completely changed what I learned 14 years ago.

  So, what I can, or may not, use arrays? Please see the reference guide for DW 2015, 5 ml

  Thank you, Deb

  Oh, my site is mainemadestuff.com

  [Edited by moderator subject line]

  Dreamweaver reference Guide is desperately obsolete. Because Dreamweaver is now updated several times per year, new features have been added, but the old material has not been removed. For example, Chapter 5 contains 12 pages on executives. Dreamweaver can't stand frames.

  Advice than a website "shouldn't even work because it is built in the tables" are nonsense. Your site does not, and will continue to work for many years to come.

  The problem with the page layout using tables, it's that it is rigid. The content is not redistributed when the site is displayed on a mobile device. Tables is also bad for technology assistance for the blind. A blind person trying to access your site would have great difficulty of navigation on every page.

  Tables should be used these days for their original purpose: to display data, such as sports or statistical results in tables of trade. Modern web design uses CSS to control page layout and styles. But do not worry about your existing site stop suddenly work. Spend the time learning the latest techniques and reorganize your site when you feel more comfortable with CSS. But forget the so-called Dreamweaver reference Guide. It will be much more to enlighten confused them.

• Question about the use of SortableModel with ADF Table

  12.1.3 jdev

  I create a SortableModel containing a list of my QueryRetrieverResultRow object.

  QueryRetrieverResultRow object has a map of QueryRetrieverResultColumn object with the key of the QueryRetrieverColumnMetaData object.

  I am capable of sortablemodel is displayed correctly.

  My problem is the sort by column. I don't know if my sortable model is sortable. I don't know what I should use for sortProperty for my column.

  When I click on the up/down arrow on my column, I get this error. "Shipping ID" corresponds to the column label, I clicked.

  < 9 October 2014 12:37:12 PM PDT > < WARNING > < oracle.adfinternal.view.faces.context.RichExceptionHandler > < BEA-000000 > < ADF_FACES - 60098:Faces life cycle receives exceptions that are unhandled in phase 5 of INVOKE_APPLICATION

  javax.el.PropertyNotFoundException: the class 'glog.fusion.common.model.QueryRetrieverResultRow' has no property 'ID expedition ".

  at javax.el.BeanELResolver.getBeanProperty(BeanELResolver.java:723)

  at javax.el.BeanELResolver.getValue(BeanELResolver.java:351)

  at com.sun.faces.el.DemuxCompositeELResolver._getValue(DemuxCompositeELResolver.java:176)

  at com.sun.faces.el.DemuxCompositeELResolver.getValue(DemuxCompositeELResolver.java:203)

  at org.apache.myfaces.trinidad.model.SortableModel.evaluateProperty(SortableModel.java:262)

  in org.apache.myfaces.trinidad.model.SortableModel.access$ 100 (SortableModel.java:50)

  to org.apache.myfaces.trinidad.model.SortableModel$ Comp.compare (SortableModel.java:558)

  to org.apache.myfaces.trinidad.model.SortableModel$ Comp.compare (SortableModel.java:516)

  to org.apache.myfaces.trinidad.model.SortableModel$ Inverter.compare (SortableModel.java:630)

  at java.util.TimSort.countRunAndMakeAscending(TimSort.java:324)

  at java.util.TimSort.sort(TimSort.java:189)

  at java.util.TimSort.sort(TimSort.java:173)

  at java.util.Arrays.sort(Arrays.java:659)

  at java.util.Collections.sort(Collections.java:217)

  at org.apache.myfaces.trinidad.model.SortableModel._sort(SortableModel.java:439)

  at org.apache.myfaces.trinidad.model.SortableModel.setSortCriteria(SortableModel.java:299)

  My jsf code is like that. viewScope.FinderBean.resultModel is a SortableModel.

  < af:table var = 'row' varStatus = "rowInd" rowBandingInterval = "0" id = "t3".

  value = "#{viewScope.FinderBean.resultModel} '"

  rowSelection Binding = "#{viewScope.FinderBean.dynamicSearchResultTable}" = "multiple" "

  partialTriggers =': b2 ">"

  < af:forEach items = "#{viewScope.FinderBean.searchResultColumnMetaDataList}" = "colMetaData" var "

  varStatus = "ind" >

  < af:column sortable = "true" sortProperty = "#{colMetaData.label}" = "no style" rowHeader "

  "headerText =" #{colMetaData.label} "id =" c# {ind.index} "width =" #{colMetaData.width} "rendering =" #{not colMetaData.adfHidden} ">" "

  < af:activeOutputText value = "#{row.searchResultColumns [colMetaData]}" id = "aot1" / > "

  < / af:column >

  < / af:forEach >

  < / af:table >

  Thank you.

  Michelle

  I end up creating my own SortableModel the same class by changing org.apache.myfaces.trinidad.model.SorableModel to implement comparator code to meet my needs.

  And in my jsff ManagedBean code, build my own SortableModel and page jsff, sortProperty attribute to use to pass sorting information.

  Now, I can click on the arrow to sort the columns up and down.

• Confusion about the use of the formula interpreter

  How can I rate a 4-bit input and output an integer value I need to map to a different value? I am to evaluate the following entries (4, 1 output):

  (((IN (0) AND IN (1)) AND (IN (2) AND IN (3)) = 13) <= we="" know="" that=""> 1111 b is 15decimal, but I need to translate the value 13 , so that it represents the index of a spreadsheet I'll be selecting with the sequencer.)

  I'm GOLD ' ing every possible combination of the 4 inputs and each combination should generate a value of 'special' I need to get out to represent the index that I need.

  The result of a comparison or logical operation (OR, AND, =, <> , etc.) is 0 (False, zero) or 1 (True, we).

  Change the formula for

  (IN (1), IN (0) AND IN (3) AND IN (2)) * 13

  In my limited testing, any value not zero entries will test to TRUE, if one is zero, then the output is zero, otherwise, the output is 13.

• Confused about the use of Fusion and boot directly to Windows via Bootcamp?  I thought that my installs would be synchronized?

  Recently, I installed Win 7 64 Ultimate using Bootcamp on my iMac 27 inches in 2010. It wasn't a problem. I then install Fusion 3.1 and import my install of Win 7 Bootcamp. Everything went well. I am using version VM to work related things which requires Windows and did not start directly into Windows for the first time, I installed and applied all the updates.

  Anyway, today I wanted to start Windows to the demo of a game. No much, that the installation of Windows seems work fine. But, I expected to see all applications and files installed there is just the way I did in the virtual machine. I thought they were basically the same facility and would be fully synchronized, but they are not.

  I'm doing something wrong or is it the way it is supposed to work?

  Is it possible to make two "versions" be the same whether in the machine virtual or kick directly?

  Because you 'imported' you see the expected behavior because an import is completely separate and apart and not linked to the original.

  On the other hand had you just clicked the button Start Up on Boot Camp entry into the library Virtual Machine, then you'd be using native installation as a VM.  However, a word of warning is in order that WPA (Windows Product Activation) can be problematic, Microsoft may require you to have two separate licenses and this is beyond the control of VMware when VMware Tools fails to control who after he activated in each environment.

• The use of devices with Windows 8

  Hi all

  I saw many problems for people with questions about the use of Bluetooth with Windows 8 devices, especially after the upgrade.

  Take a look at this document, which covers:

  I hope that this document provides assistance.

  Good luck!

• Confused about the extension of the Sprite class

  Howdy-

  I learn programming with object oriented ActionScript and am confused about the class Sprite and OO in general.

  My understanding is that the Sprite class allows you to group a set of objects that you can manipulate all the objects at the same time.

  I explored the Open Flash Chart code and note that the main class extends the Sprite class:

  Base/public class extends Sprite {}

  What this lets you do?

  Also, on a related note, how to draw, say, a line once I extended?

  Without extend Sprite I could write:

  var graphContainer:Sprite = new Sprite();

  var newLine:Graphics = graphContainer.graphics;

  ...

  And it works very well. Once I have extend the Sprite class, I'm lost. How can I modify this code so that it still draws a line? I tried:

  var newLine:Graphics = this.graphics;

  My understanding is that since I extend the Sprite class, I should still be able to call its method chart (or property? I have no idea). But, he screams at me, saying "1046: Type was not found or is not a constant of compilation: graphs.»

  A number of things.

  First of all, I would not use this approach in your table constructor. Setting the width and height only makes sense if you adjust the width and height of the existing content, and the table (Sprite) does not at this time here. If you want to give the table a 'size', you could do it like this:

  public function Chart (width: Number, height: Number) {}
  This.Width = width;
  This.Height = height;
  put in a background invisible to this size:
  this.graphics.beginFill (0,0);
  this.graphics.drawRect (0,0,width,height);
  }

  There are other ways, including putting in a form or a Sprite of child as a child for the background so that clear will not erase the background of the chart. This way you could have properties for the background in your table class and update the background as a child DisplayObject instance... a few ideas to think to...

  Then, after that, your chart should be functional...

  Then back in your scenario, you could do this:

  import graphics. Table;

  Stop()

  var myNewChart:Chart = new Chart (300,200)
  myNewChart.render ();
  addChild (myNewChart)

• Confusion about the size of the array in Oracle 11 g

  There is confusion about the size of a table. When exporting schema 'CRESTELWOMPRD601', the log file shows:

  _____________________________________________________________________________________

  . . exported "CRESTELWOMPRD601." "' TBLRSUBSCRIBERFIELDWORK ' lines of 12.62 GB 35568

  ____________________________________________________________________________________

  which may involve the size of the TBLRSUBSCRIBERFIELDWORK table is 12.62 GB.

  But when I find the size of the table using the query:

  SELECT nom_segment, BYTES / 1024 / 1024 "SIZE (MB)" FROM dba_segments where owner = 'CRESTELWOMPRD601' and nom_segment = 'TBLRSUBSCRIBERFIELDWORK. '

  He said that the size is only 9 MB for the TBLRSUBSCRIBERFIELDWORK table.

  I hope that my request is clear that there is no clarity on the size of the TBLRSUBSCRIBERFIELDWORK table.

  Please get back with the answer to my query

  
  

  Concerning

  Dba_segments indicates the space allocated to the segment while expdp indicates the size of the exported data, so if you had a table with a measure of 1 MB, but no data, dba_segments would 1 MB and expdp would report 0 bytes.

  John

• The use of SSL with IE via httpService

  Hello
  
  I read the Wired article http://weblogs.macromedia.com/lin/archives/flex/security/index.cfm on the use of SSL with THE de Lin Lin, however I am confused as how to implement the changes that she mentions. Basically, she mentioned a couple of the reasons why the httpServices would not be able to load data in the event of connection via SSL. I've read about the Adobe TechNote at http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=fdc7b5c & SSP = rss_flashplayer_fdc7b5 c , but it was not clear either.
  
  1. How can I change the settings of the server have the correct header information?
  2. can I change something in the compiler Flex for SSL and IE?
  
  It works perfectly in FireFox and Safari, and retrieves the data without any problem. All ideas, information would be appreciated.

  Re 2) in my opinion, there is nothing that you can do on the side of Flex, there seems to be a problem with IE passing data to the FlashPlayer.

  (topic 1), depends on how you generate data on the server. We use Java servlets and the solution is to _not_ set non-cache on the answer when
  dealing with IE.

  R.

• Confused about the notion of VLAN

  I'm confused about the VLAN. I thought that the notion of VLAN was this computer on different VLANS were not suppose to be able to communicate with each other. I am setting up a 6248 and for me to get DHCP to work, I need to enable ip Routing. When I turn the routing ip, all computers on different VLANS are able to ping each other. Is - it the way it was suppose to work, or am I missing something?
  MGMT is on vlan 4093
  DHCP is on VLAN 100 trunk e34 10.10.1.1
  Host 1 is on VLAN 200 trunk e34 10.10.2.1
  Host 2 is on VLAN 300 trunk e34 10.10.3.1
  active IP routing
  
  

• I get a warning about the use of an older version, even after the installation of v24.

  Several sites (including Mozilla) Internet gives me a warning about the use of an older version. I am currently on v24 and when I take the advice to be updated simply re - installed v24 yet again, but the expired message does not disappear!

  Thanks report, deleting the file user.js wasn't the first step - please also resets the user agent parameters as described in https://support.mozilla.org/en-US/kb/websites-say-firefox-outdated-or-incompatible#w_firefox-is-showing-the-wrong-user-agent and restart the browser.

• What is the last recommendation on the use of Aperture with El Capitan system software?

  What is the last recommendation on the use of Aperture with El Capitan system software? I'm sure to BONE 10.11.x since I was a big user of Aperture?

  TIA,

  If you need a feature that has opening but Photos doesn't work, click here and follow the instructions.

  (141652)