method of sharing, but not since the beginning of the table

Similar Questions

• Visible data in a 2D table but not in the Table connected control

  In the attached drawing, you will see that I take control of Table in table form, change the items to help replace a subset of table and then return the resulting table in the Table control.

  I can see my data in "Table of output" and a probe on this thread, but my Table control is empty.  The Table control is 10 columns of 50 lines.

  Can someone tell me why there is no data for the Table control?

  Please do not ask I post the VI because it is big, ugly and not mine to post.

  I can't believe.

  I couldn't see the data because it was out-of-frame.  My Control Panel flashed down a 30 line window and my data was in the first line only.

• screen sharing, but not in the page, it's on the screen itself, this is not a problem of tiling and even appears before openening all pages

  Hi, during the opening session on my computer, I got a little split screen, separation is 1/4 to the top of the screen and the screen ends 3/4 through my computer screen. It is not connected to a screen divided through tile, pls don't tell me to undo the tile, it is a different matter. I did not select anything to do this, I went through all properties and nothing seems to fix the problem, I also went for the restart of old, but doesn't change nothing, have tried the restore too, if anyone could help it would be appreciated.

  Please note the split isn't in the windows control panel, but on the whole computer screen, when I scroll to the top of my cursor down spread and the high apears

  Also note pls I told him it was a hardware problem, because I had to select a category, not because it is certainly the case

  Hi johnjimmy,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow the steps in the article.

  Resources for troubleshooting problems in Windows XP

  Method 2: Update the latest drivers to display/graphics.

  How to manage devices in Windows XP

  For reference:

  Change your screen resolution

• is there a way to photos of the list on the hard drive, but not in the catalogue?

  I know that sometimes I have removed pictures of PSE12 but forgot to check the box to say ' also remove hard drive.

  is there a way to photos of the list the disk hard, but not in the catalog, so I can remove them from the hard drive?

  TIA

  gleeado wrote:

  I know that sometimes I have removed pictures of PSE12 but forgot to check the box to say ' also remove hard drive.

  is there a way to photos of the list the disk hard, but not in the catalog, so I can remove them from the hard drive?

  TIA

  There is no easy way since the only organizer knows what is indexed in the catalog.

  You can use the backup / restore process to move your library to a new drive or a master folder. Only the files in the catalog will be there. You can remove all media files from the original location via the Explorer / Finder. This will take care of duplicates and missing files catalog.

  Another way would be to work from selected records.

  You run the process of "import" of a given folder. If there are new or old files not those registered, they will be added to the catalog, others, already in the catalog will be ignored. The 'batch import' should be what you want to delete. It also works with files in the subfolders of the selected one.

  It is also possible to move files to a folder selected to an another new void; you select all in the thumbnail pane (not folders on the left panel) and use the command move or drag and drop the thumbnail space into the empty destination folder on the folders on the left panel. What will remain will be the 'imported step. '

• Is it possible to send a document through EchoSign, but not allow the recipient to sign in fact that a certain number of days later?

  Is it possible to send a document through EchoSign, but not allow the recipient to sign in fact that a certain number of days later? I often send contracts which have a period of seven days - if the recipient is not allowed to sign until seven days have elapsed since the date I send the contract. I was wondering if there is a way to fight against this automatically or if I should tell them that they cannot sign up to a certain date and count on them to follow my instructions.

  Hi Jamie,

  From now on, once the document is sent to the signatories that they can esign it at any time and it is not possible to delay or set the least number of days before they can not esign.

  Although EchoSign does not have this feature currently, but we can send your request to our team of developers to integrate the requested feature becomes available in the future.

  You can also put your ideas on our page of ideas (http://ideas.echosign.com/forums/21617-echosign-general ) where your feature request will go directly to our development team.

  Kind regards

  -Usman

• RAISE_APPLICATION_ERROR work on A schema, but not on the diagram B

  BANNER
  ----------------------------------------------------------------
  Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - Prod
  PL/SQL Release 10.2.0.5.0 - Production
  CORE Production 10.2.0.5.0
  AMT for Linux: Version 10.2.0.5.0 - Production
  NLSRTL Version 10.2.0.5.0 - Production
  
  Hi, I'm working on this link: http://kamranagayev.com/2009/10/04/block-developers-from-using-toad-and-other-tools-on-production-databases/
  

  CONNECT / AS SYSDBA;
   
  CREATE OR REPLACE TRIGGER block_tools_from_prod
    AFTER LOGON ON DATABASE
  DECLARE
    v_prog sys.v_$session.program%TYPE;
  BEGIN
    SELECT program INTO v_prog
      FROM sys.v_$session
    WHERE  audsid = USERENV('SESSIONID')
      AND  audsid != 0  -- Don't Check SYS Connections
      AND  ROWNUM = 1;  -- Parallel processes will have the same AUDSID's
   
    IF UPPER(v_prog) LIKE '%TOAD%' OR UPPER(v_prog) LIKE '%T.O.A.D%' OR -- Toad
       UPPER(v_prog) LIKE '%SQLNAV%' OR     -- SQL Navigator
       UPPER(v_prog) LIKE '%PLSQLDEV%' OR -- PLSQL Developer
       UPPER(v_prog) LIKE '%BUSOBJ%' OR   -- Business Objects
       UPPER(v_prog) LIKE '%EXCEL%'       -- MS-Excel plug-in
    THEN
       RAISE_APPLICATION_ERROR(-20000, 'Development tools are not allowed here.');
    END IF;
  END;
  /

  The problem is that RAISE_APPLICATION_ERROR (-20000, "Development tools are not allowed here.");
  are you working on a scheme A, but not on the schema B. thanks in advance.

  infotools wrote:
  for the USER sys, she also success.

  Any user who has the privilege of the ADMINISTRATION DATABASE TRIGGERS you connect successfully even if the trigger generates an error. This is to avoid a bug in your trigger to prevent the ADMINISTRATOR to connect to the difficulty of the trigger. If user B in your example received this privilege, the logon trigger will do nothing.

  As has been pointed out, it is trivial to work around - there is very little logic to try to limit what a user can use the tool. I can always find another client tool to use (for example, SQL or SQL Developer * more). And I can always change my client tool to send a different program to the database name.

  Justin

• Hyperlink works locally but not on the Intranet

  Hello
  
  Behavior very strange because most of the other hyperlinks in separate projects works only on the Intranet, but not locally. All the settings for hyerlinks are the same, since they have been pulled from a template.
  
  All ideas
  
  Lisa

  Hello

  I found my problem. I was pointing to the address of the server in my button instead of the http address. This is the reason for which he worked a sense but not in the other.

  Thanks for listening.

  Lisa

• How to insert a page in a section, but NOT like the last page?

  How to insert a page in a section, but NOT like the last page?

  and how to integrate fonts in a pdf export?

  How does choose a 5.5 x 8.5 book format?

  Adding pages to get to the end.  You can, however, keep typing to the point you need to add a page. Once the page seems to make corrections.

• Embedded YouTube videos work locally, but not after the FTP publishing. Works locally and on the web in all other browsers. Using FF 17.0.1 and Adobe Flash 11.5.502

  Found a Tube-video, which I embarked on one of the pages of my site. Using FF 17.0.1 and Adobe Flash 11.5.502, YouTube-videos work locally, but not after the FTP publishing.

  I work reasonable locally and on the web in all other browsers.

  Stupid FF?

  The HTML code is as follows:

  <table WIDTH="770" CELLPADDING="0" CELLSPACING="0">
    <tr VALIGN="TOP">
      <td VALIGN="top" ALIGN="left" width="463">
  <object WIDTH="340" HEIGHT="193">
        <param name="movie" value="http://www.youtube.com/v/N6GvuO_9tLY?fs=1?amp;hl=de_DE">
        <param name="allowFullScreen" value="true">
        <param name="allowscriptaccess" value="always"><embed SRC="http://www.youtube.com/v/N6GvuO_9tLY?fs=1?amp;hl=de_DE" TYPE="application/x-shockwave-flash" WIDTH="340" HEIGHT="193">
      </object>
  </td>
      <td VALIGN="top" ALIGN="left" width="403"></td>
      </tr>
  </table>

  I've experimented on the use of < iframe > instead of < object >. No change. Cache cleared on each attempt.

  Any thoughts?

  If it works in Firefox Safe mode and then disable all extensions (Tools > Modules > Extensions) and then try to find out who is causing by allowing an extension at a time until the problem reappears.

  Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

  Alternatively, you can try to disable hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• FF4 tabs: above the Awesomebar, but not in the title bar?

  How do you get the tabs above the awesomebar, but not in the title next to the Firefox button bar? I have a dock at the top of my screen I want to keep, so I'm not all the way at the top. I want it to look like it turn Firefox page (http://www.mozilla.com/en-US/firefox/central/), with the title, tabs, awesomebar bar, then the content page.
  Currently, if I click on the tabs on the top, the legs of loading at the right of the button Firefox orange at the top, and if I uncheck that, all my tabs (of course) end up under the awesome bar.

  You can set the pref browser.tabs.drawInTitlebar false on the topic: config page.

  • http://KB.mozillazine.org/about%3Aconfig

• I can connect to the local network, but not to the internet

  Why in an internet connection, I can connect to the Local network, but not to the Internet.
  I have valid IP address and configuration is good.

  I recommend you read some threads here in the forum about similar issues.
  If this problem occurs using the WiFi network, then check if you can use the connection to the local network.
  Using the WiFi network, you must check if the common WLan parameters are favourable;
  Check if the encryption key is right; turn off filtering by mac address, check the TCP/IP protocol settings if it has been set to automatic, disable the firewall settings, rest you WLan router, check if you connected to the right SSID.

  Good bye

• Can connect to Skype with a single account, but not with the other

  I am able to connect to Skype with my own login but not with the credentials of my friend on his pc. I can however connect with her details as well as mine on my pc?

  You need to upgrade your Internet Explorer to the latest version of IE8 for Windows XP.

  http://filehippo.com/download_internet_explorer_xp/

• A60: Work of the Audio Conference on laptop but not on the car radio CD/home

  Hello
  I tried a number of blank disc CD - R and CD - RW, but none of them work with record Sonic to burn music from an audio disc on a blank CD. Music plays on laptop, but not in the CD drive or the car home. Anyone know what the problem is. Really is tired of the use of different brands. nothing works!

  Hello

  You burned the CD and this CD works fine on your laptop, but it of not possible to play in the drive of the car and on your cd player. Is this good?
  Well, in this case there no problems with your laptop.
  I guess that the other players cannot read the CD because they don t supports the support or the audio file format.
  Which audio format you used and you burn music from the original CD?

• On my iPad, can I move files from one folder to another, but not in the Preview file, why?

  When you manage files in iCloud, from an iPad, I can move to the files from one folder to another, but not in the Preview file. Secondly, when I check the file Preview to iCloud from Mac content is so different when you look at an iPad. Why is the gap between the iPad and the Mac?

  Try to go to iCloud.com to see if the elements are there and whether the device or the computer. That should indicate if the device or computer is not synchronizing. If the computer, try going to System Preferences/iCloud and stop synchronization. Wait a few minutes, then recheck the timing. If the device, go to settings/iCloud and do the foregoing.

• Playlists imported, but not all the songs won't matter

  I exported my playlists my macpro mnt lion and when I used my thumbdrive to import on my macbook pro (mavericks) some, but not all the songs from the imported selections. It just says: the files can be found--just before this that I imported the entire library, so I know that my whole library is on the macbook pro.

  Some files are mpegs and some are AAFC, but there is no correlation with what files are transferred correctly as its both.

  MacPro (mnt lion)--> macbook pro (mavericks)

  You must transfer your complete (in one piece) iTunes folder, which should include all your media files and your iTunes library database (where are stored the data supporting such as playlists, ratings, play count, date added, etc.).  Then iTunes on the new Mac looks like iTunes on the old Mac, with all your songs and playlists, because you use the SAME library. you do not add your media files to a new library.

  If you want more information on how to do it, instead of your playlist Exim problem troubleshooting, please post back.