Microphone doesn't work is not on my Vostro 1500 with Vista Ultimate

Similar Questions

• Microphone doesn't work is not in Windows 7

  my sounds work but microphone doesn't work on my win 7, I have a driver realtek hd audio, please give me solution, please...

  Hello

  What application you use to record microphone?

  Method 1: Run the troubleshooter and check if the problem is solved or not.

  Open the troubleshooting of Audio recording

  Method 2 : perform the steps in the article and see if the problem is resolved or not.

  Adjust the microphone volume

  Method 3 : record the sound of the sound recorder and see if it works or not.

  Record audio with Sound Recorder

  Hope that helps.

• Microphone doesn't work is not on my Dell XPS 420 after upgrading to Windows 7.

  I upgraded my computer to vista 32 bit to windows 7 64 bit about 2 months ago.  Right now, I couldn't get my microphone to work in one of the slots of jack mic.

  First of all, I thought it was the drivers for the on-board his so I tried to update, but it has not solved the problem.  Then I went and got a rocketfish 5.1 PCI Sound Card, which also did not work.  I tried the 'Device Manager' strategy, said on other forums, but the whole place mic scene still gives me the error "Wizard could not be started" I also tried to go into the BIOS and play with the sound settings in there because I've heard of windows 7 may have turned off the sound settings during installation but I wasn't too sure about what to look for what does not solve the problem.

  Should what other troubleshooting technique I try to make my microphone work

  OK, I found the solution:

  This announcement on as many sites I can find because everyone is having this problem. I went without a microphone for a year of good year and a half now, and I was upset not being able to speak in the wind.

  The solution:

  Go to dell.com site > go to home > drivers and downloads > service etiquette > enter your number of service (at the back of the computer) > switch from 32-bit vista or vista 64 according to which windows 7 you are running (I use 64-bit). > Download and install the chip set driver > install > restart > go back to the site of dell > install the audio driver (even if you have installed previously) > restart > BAM YOUR microphone SHOULD NOW WORK :) This is because you must install the driver game chip saying that your microphone is actually the front of your computer (no port in the back) :)  Man am I happy!

• Microphone doesn't work does not correctly in my Y510

  Hello

  I bought the ideapad Y510 6 months back. I did not use the microphone I was notusing cat etc.

  2 days back when I tried to chat, the first time in my laptop, the microphone does not work. You literally scream mic developed to have one third of hear it.

  Please help with any solution

  Pradeep

  Hi, I took it to Lenovo support center and they it is resolved. It's a matter of adjustment. Its works perfectly fine now. Thanks for the mail. Pradeep cordially

• Microphone doesn't work is not in installed in my Dell laptop.

  My internal MIC for my Dell laptop does not work, although when I go into the sound, check the devices tab, he says he's working (Microphone, high definition Audio Device, work).  I tried to record using sound recorder, and it's play back with no noise at all. Is all that I could to correct it?

  Hello

  Control Panel - SOUNDS - Audio peripheral devices configuration-manager

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  If your driver shows 06 you have the default windows and part of the question.

  Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
  Put them - right click on Reboot - RUN AS ADMIN -.

  Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often and then
  Finally, install the current version. Restart and check after each test, not uncommon to have to run
  the pilot of 1 to 4 times or more. Just make sure that the version you have installed appears in the tab of the driver.

  Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check Show disconnected
  Devices and display disabled devices - check your micro - highlight them and then at the bottom right
  Properties. Make sure that the appropriate injector is enabled and check the other settings - tab make levels
  sure MUTE isn't checked and APPLY / OK changes.
  
  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  ----------------------------------------------------------

  You can also consult with Dell Support and Forums.

  Dell support
  http://support.Dell.com/

  Dell forums
  http://en.community.Dell.com/forums/
  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• microphone doesn't work is not in applications

  Hi so in messenger and Skype. people can see me, but they can't hear me. I welcomed the microphohe and all that. I reset the phone and re instslled the app aswell. csn people still hear me when I'm on a phone call he only on am in the aps? Tips to get it working would be perfect thank you b.

  I don't know what "enabled the microphone (sp) and all what" really means.

  You don't have to do two things:

  • Settings > privacy > Microphone = 'On '.
  • Settings > privacy > Microphone > [each app that requests access to the microphone] = 'On '.

• with firefox 43 yahoo and yahoo mail doesn't work does not correctly

  With the help of win 7 and firefox 43.0.1, I have 4 computers and now all have problems with yahoo and yahoo mail doesn't work does not correctly. Loading sites, but most of the features are missing and clicking on what whether changes to the lists of text. I have disabled flash / anti-spam etc., cleared cookies and cache and even firefox loaded down once again and have upgraded, no help. I'm forced to use IE now.

  I tried Yahoo support, they said try Firefox... In any case, it's Firefox and I found a solution using the 'Refresh Firefox' button. Whatever the problem was fixed on two of my computers so far. Got to update my setting again but it's 10 m, compared to the 10 hours I spent trying all that is nothing.

  Thanks for the help!

• spell check doesn't work is not in outlook on windows 7

  Hi the spell checker doesn't work is not in my outlook for windows 7. This can be corrected?

  Sincerely, Robert H.C.

  Outlook.com has a manual spell at the top next to the options button control. It won't appear that if you write an e-mail AND if your browser is not checking spelling himself. In most modern browsers the spell checking is done by the browser itself and may need to be enabled in this browser

  http://email.about.com/od/windowslivehotmailtips/Qt/How_to_Use_the_Windows_Live_Hotmail_Spell_Checker.htm

  You may need to activate in your browser

  Google chrome
  http://support.Google.com/chrome/bin/answer.py?hl=en&answer=95604

  Firefox
  https://support.Mozilla.org/en-us/KB/how-do-i-use-Firefox-spell-checker

  IE , it depends on the version you have.

  http://blogs.msdn.com/b/ie/archive/2011/11/08/typing-with-speed-and-accuracy-in-IE10.aspx

  For additional amount IE 10 tips https://ie.microsoft.com/testdrive/Browser/SpellChecking/Default.htmll

• DNG Converter doesn't work is not on a camera called raw photo

  DNG Converter doesn't work is not on a raw photo camera that always comes back with this Message "check if the camera is recognized.   "

  Supported cameras Camera Raw plugin | Compatible cameras

• LR 5 doesn't work is not on the new Macbook Pro.

  LR 5 doesn't work is not on the new Macbook Pro.  Have tried 2 CC downloads, download licensed 5.6 and 5.5 download licensed, all the results in the same thing.  It comes up with the screen base but no signs and gives that an error occurred when changing the modules.  Nothing I have tried seems to help.  He also said "start with lightroom mobile at the top on the left, although it said it's Lr 5.6.  Anyone else having problems?  Calls to adobe are no help and have to wait until Monday for technical support.  Surely this must run on a NEW laptop with any other installed software!

  Setup logs was very good.  Application installed but is not working properly.  Finally got Adobe support and it turns out be a file permissions error.  Had to add applications and myself as accessors of the Lightroom folder under ~/Library/Adobe/ path and set permissions to read & write (was read only for everything except system) and apply to all the cases closed.   Works fine now.  Including this here in case when someone else is going through this issue.

• Fingerprint reader HP HDX16 and two other drivers not detected after an upgrade to Vista Ultimate.

  Hello.

  Recently, I upgraded my HP Windows Vista Home Edition of Windows Vista Ultimate Edition HDX16 model (quite a 'new installation' upgrade.) Since then I've been doing a handful of drivers went unnoticed in the Device Manager. Keep in mind that the unpacking, all devices in the computer worked as it should.

  I downloaded all the drivers on the site of HP drivers, and these drivers are not detected. This led me to the relization that I might have to do a destructive reinstall of my OS, back to Vista Home edition. This would make Vista Ultimate completely a waste. Very restless indeed. I contacted a representitve HP, and he identified my problem: drivers preinstalled on the computer are adapted to the Windows Vista Home delivered pre-installed on my computer. However, he could not help me solve the problem.

  As a last resort, I tried a program called Driver Genius for backing up the computer a friend (who purched the same exact model, with Vista Ultimate pre installed,) drivers. This corrected a lot of the unknown devices, but I'm still left with three unknowns. I'm quite positive that one is the fingerprint reader. He refuses to be detected on start-up, and what is installing digital persona personal.

  Here is the run down on the three unknowns:

  1.

  Manufacturer: unknown

  Location: On bridge PCI standard ISA

  2.

  Manufacturer: unknown

  Location: On the Microsoft ACPI-complaints system

  3.

  Manufacturer: unknown

  Location: Port_ #0001.Hub_ #0005

  I tried to install DigitalPersona.

  I tried to reinstall Digital Persona.

  I tried to repair Digital Persona.

  I tried to perform a clean installation of Digital Persona (uninstall, reboot, reinstall).

  I tried to reinstall Windows Vista Ultimate.

  I tried to get the drivers from the same model of computer (with pre-ultimate isntalled.)

  Identifying them all help to detect / detection / providing information about where to install the drivers would be a great help.

  Thanks in advance if you think you can save me from downgrading back to home.

  ACPI\ENE0100
  * ENE0100

  Ene Cir Receiver here

  ACPI\HPQ0004
  * HPQ0004

  ProtectSmart Hard Drive Protection here

  REV_0372 & USB\VID_138A & PID_0001
  USB\VID_138A & PID_0001

  Of validity fingerprint sensor here

• WiFi doesn't work do not

  A year and half ago we bought a new Mac and the Time Capsule (TC) to go with it. I tried to set up at the start and think about this topic, I do not think that it has never worked properly. I say this because we got a new modem without router because time Capsule has an inside, and we are unable to connect to wifi. I have a TB Ethernet connection and if I can get online in this way, but the WiFi does not work. Last night, I went through and set up and the WiFi worked, but today it no longer works and I can't seem to do it again.

  The indication of WiFi signal says I'm connected, on my Mac and on our phones, but when you disconnect from data it no longer works. It's very frustrating because I don't want to have to go back to a modem/router of the rental of our cable company.

  We have just upgraded to OS X El Capitan 10.11.6

  When it worked last night I created everything from scratch. But I do not think that I would have to do every time I need to use the internet. I also tried to create a WiFi with a custom DNS but that doesn't work anymore.

  Any help would be appreciated.

  Thank you.

  Amazing!

  I am so embarrassed but understand that I would update in the case where everyone does the same thing.

  When I put in 1.5 years ago I went from ethernet cables. The Ethernet cable from the modem was connected to the LAN port and the Ethernet cable from the Mac was connected to the WAN. Once I put the cable from the modem to the WAN everything has worked.

  Sometimes, just come back to square one.

• Crossfade doesn't work does not in iTunes 12.4

  I use OS x El Capitan 10.11.1. set iTunes to automatically level to 12.4. I played music on a playlist with crossfade turned on, but none of the songs crossfaded. I am aware of crossfade doesn't work every time that the songs are played in order any of the same artist and album, but my playlist was not organized as such, so it should work. I tried to turn the market feature and quit iTunes and restart, but no luck. Any suggestions?

  Although I usually do not use this feature, you seem to be correct.  Can operate either...  You can report the problem here

  https://www.Apple.com/feedback/ (under OS X Apps - iTunes)

• Touchscreen doesn't work is not for the Satellite U920t - 10 p

  Please read this completely before you answer with your copied and pasted answers.

  My touch screen lets you stop work, but was still attached with a reboot of the machine.
  Now it doesn't work at all and * I've tried everything posted elsewhere in this forum *.

  I tried to change the settings for battery power, try to update the drivers (not exactly who is right though!).

  Please can anyone help because it is a new machine and it's very frustrating.

  Serial number: 7D054633H
  Model: Toshiba Satellite U920t - PSUL1E-01900JEN 10 p

  Thanks in advance.

  > Please read this completely before you answer with your copied and pasted answers.
  IMHO, I n t think that someone here in the forum doesn t read the messages before playback
  I hope that this part of your post is just the result of frustration due to the malfunction of the notebook...

  Back to your question:
  > I tried everything already posted elsewhere in this forum.
  and what does this mean? What have you tried exactly?
  Have you given zero and plant control panel?

  If not try and in the case where this help not the laptop's hardware could be affected which requires new checks of material by an authorized

• Why is to speak the text doesn't work does not correctly?

  I get a circle turning for a while and no results. He used to work. I have the latest OS 9.2.1. I can see the memory. I have hard reset (home + power on button). I have reset the settings. Nothing helps.

  Hi, PBoesmans.

  Please visit Apple support communities.

  I understand that the option to dictate does not work with Messages on your iPhone 5.  Because force applications to close no has not solved the problem, please go through the troubleshooting steps below.

  Help with Siri

  • If "Hey Siri" does not work, make sure that "Hey Siri" is turned on under settings > general > Siri.
  • Could Siri say, "Sorry, I have problems connecting to the network", or "Try again in a few moments." It is probably a problem with the network. Check your Internet connection and try again later.
  • If Siri is not available or responding to questions, see the next section.

  If Siri is not available, or do not understand or answer questions

  After each step, see if you still need help:

  1. Make sure that your iOS device has an Internet connection via Wi - Fi or cellular data.
  2. On your iOS device, make sure that Siri is enabled in settings > general > Siri.
  3. Restart your iPad, iPhone or iPod touch.
  4. On your iOS device, go to settings > general > Siri and turn off Siri. Then turn on again.
  5. Ensure that the microphones on your device are not blocked. For example, if your device has a protection case, remove it.
  6. If you use an iOS device, try to use Siri with headphones. If the works of Siri, get more help with the microphones on your device.
  7. Contact Apple support.

  Use Siri on your iPhone, iPad or iPod touch

  See you soon