Microsoft 2000 not recognized wireless mouse - code 43

Similar Questions

• CD/DVD getting not recognized with error code 0 x 8007003

  Original title: Windows Media Player

  my lap top will not come CD dvd I used microsoftxit as fair, he told me that it can not detict cd dvd and error code 0 x 8007003 can do everything what it means please

  Hello

  • What operating system is installed on your computer?
  • You did changes to the computer before the show?
  • What Microsoft fixit did you use?
  • What is the full error message that you receive?
  • What is the number and the model of the laptop you are using?
  • Should be restricted to any particular CD/DVD?

  Try the suggestions in the link and check if it helps:
  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/314060

• ("My CD or DVD drive is missing or is not recognized by Windows (Code 39)")

  My CD / DVD is missing or is not recognized by Windows. My driver Version: 6.1.7601.17514, OS is windows 7.

  I received the following message:

  • Windows encountered a problem installing the software driver for your device
  • Windows raise driver software for your device but encountered an error trying to install it.
  • Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  I tried several ways to follow the steps that says on the website of Microsoft, as with the help of the hardware and peripheral troubleshooting tool, but it didn't work.  I also used a new external device and was not recognized by windows as well. By the way

  Can you still collect my DVD player?  How can I solve this problem? Thank you

  Run these set the then restart.

  http://support.Microsoft.com/kb/982116

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  http://support.Microsoft.com/kb/316529/

  http://support.Microsoft.com/kb/314060

• Device not recognized USB - mouse

  Hi - write a new thread that I raised in a previous which I suppose is not sought at the most. Mods - delete please if you always looked at the other thread.

  I started intermittently gel experience with my old USB mouse, so I replaced it, that to have my new mouse (Canyon CNR-MSL7) begin to experience the same problems. Intermittent at first, but it became unusable over time - error "USB device not recognized". I tried two mice in another PC and they work fine. I use Vista is said by the way.

  I had a hard disk separated on my laptop (Sony VAIO VGN-AR71S) failure so I sent away for repair. I advised the hardware failure Sony and my USB mouse problems - she is back with a new HD but they said they found no defects with the USB.
  the mouse worked for about 1 day before I started getting the error 'USB device not recognized' again.

  A system restore will obviously work for me because my hard drive has been replaced and I have the same problem I had before, despite the installation of the more updated version of vista to Sony.

  The laptop has the most until drivers date etc, but does still not more than 95% of the time. I went through different threads here and I checked that everything is fine with the USB etc hubs, but not joy.

  I checked the ports are feeding correctly and that they are.

  I tried power down, stop and remove the advice of battery given here that seems to have worked so well for people but it does not work for me unfortunately.

  Is someone of MS can advise if it is sought in order to create a solution that works for those of us who does not work for the option "disconnect"? I tried all the solutions to this problem listed on the various threads on this subject in this area and other forums. Or can someone tell me if there is anything I can buy to remove the problem? Equipment etc? I thought that an upgrade to windows 7 could help, but I've seen a lot of discussion here that clearly show the same problem that appears for people who use it.

  Another new mouse like the ticket to me if you have hardware problems (and this is
  my best bet).

  Rob - bicycle - Mark Twain said it is good.

• Microsoft Optical Trackball not recognized by mouse and keyboard Center 2.2

  I use the mouse Microsoft Optical Trackball USB 1.0 with Windows 7 x 64 on the desktop HP Z210.
  After you have installed update "Microsoft - pointing drawing - Microsoft Hardware USB Mouse", my Intellimouse software has been replaced by v.2.2.173 Center of keyboard and mouse, which explains that he finds not all devices supported.
  Following the procedure described here http://www.microsoft.com/hardware/en-us/help/windows-8/troubleshooting/mouse/hw-connection, I tried to plug my mouse to all available USB ports, but the result was the same.
  Fortunately, all the extra buttons work as before, but there is no way to configure.

  After reviewing this issue, I uninstalled v.2.2 Centre of keyboard and mouse and installed previous from herev.2.1.177. Now everything works fine.

  I unzipped the installation of v.2.2 files both v2.1 and compared the content - apparently in the new version, model files and the description of file INF for my mouse is missing.

• Drive not recognized DVD/CD (Code 19) on the Satellite

  I get this message:

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  It will not show the unit. It's a rug * a DVD-Ram UJ880AS ATA Device, any suggestions?

  Hello

  Cheque please follow thread and solution posted here - http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=259048

  Be so kind and let us know if problem will be solved or not.

• Lenovo z580 not recognizing wireless adapter

  Hello everyone

  I just brought a new Lenovo ideapad z580. It came with windows 8, which is unusable. So I did a clean install of windows 7 and keep trying to install the drivers.

  Windows refuses him acknowledge the existence of my wireless adapter. I opened the bottom to the top and I can see her, but he does not recognize. I installed the driver, and it does not recognize. I went into device management, and there was a small exclamation mark by "network controller" I don't know if this is the wireless adapter that it does not recognize. I went into bios and disabled WLAN and then restarted and reanbled it in bios and tried again all without success. I don't know what to do I am at a loss...

  Someone at - it ideas?

  The network controller is the wifi card. Try to install the drivers manually from the Device Manager.

• Printer not recognized wireless

  Trying to add an additional printer wireless to wireless cisco just doesn't recognize. It appears in the control panel and works fine manually. Have two printers on the network and had the same problem with the printer new's replacement. Delete this printer and all of a sudden the cisco network acknowledged the second printer, which he has not done before.

  Also tried plugging the new printer on the router via an ethernet cable and appears as offline.

  Hello

  If the wireless printer connects to a router.

  Install the printer software on each computer that will use it and set it up through the interface of the software.

  Jack MVP-networking. EZLAN.NET

• Windows 7 not recognizing wireless Micro JBL speaker.

  Original title: the JBL Micro speakers wireless

  Hello! I had a speaker JBL Micro Wireless. Unfortunately I can't log into Bluetooth mode. My PC find the speaker but may not recognise. When looking for a driver, it can not find. Someone of you has solved this problem please? I use Winfows 7.

  I had the same problem, but now its resolved, try to update your win7

  before that, I had problem to connect via bluetooth with my hp pavilion for jbl wireless microphone,

  its can detect but can not to connect/play music,.

  and after updating my win7 its ok now :-)

• laptop is not recognizing wireless printer installed

  I use Windows 7 and I have a wireless printer. I installed the printer eleven times. Every two days the laptop no longer recognizes the printer so I need to reinstall it to use it. I tried to remove the older printers after I installed the printer. I am able to delete the printer, but it manifests itself later. How can I get my laptop to remove the additional printers (which refer to the same physical printer) and install the wireless printer without reinstalling every two days?

  My last laptop worked fine with the printer wireless, and there's another user who connects to the printer wireless also. I have established that it is my system not the printer.

  Any help anyone could offer would be great.

  Thank you!

  Melanie

  If you have 10 printers showing removing all but one. Select Start, Control Panel, devices and printers, right-click on the printer icon and select Remove the instrument.

• Serial number on creative Suite 5.5, design standard is not recognized and the code error 5 for Indesign and illustrator

  I need my Mac operating system reloaded and now can no longer access create Suite 5.5 Design Standard after I installed it.

  I am currently Mac OS x version 10.8.5

  When I try to open InDesign or Illustrator I get a message that said "configuration error 5." and I am encouraged to contact 'support Adobe' (what I've done and they are no help at all) and when I try to open Adobe Photoshop and enter the serial number of my product, it says "this serial number is not valid for this product".

  Help, please?

  Thanks in advance.

  ATTENTION... any request for use of Skype is a SCAM... Adobe does not use Skype

  Please post the real Userid here so Adobe can ban this user from the forums

• Hauppauge HD PVR device not recognized / Code error 10

  From the beginning, I bought a Hauppauge HD PVR about four months ago and, to my delight, it worked flawlessly out of the box on my laptop Toshiba in Windows Vista and my laptop Windows 7 Sony. I had saved a good part of my X - Box 360 images when, one day, the device has mysteriously stopped working on my Windows Vista laptop. Whenever I plug it into the laptop Toshiba, it registers as an unknown device or with a wrong code error 10 device. Sometimes, maybe once in ten when moving from one port to another, it will come to the top and works correctly, but if I dared to turn off the computer, turn off the PVR or unplug the USB cable it immediately returns to what is not recognized / 10 state code.

  The laptop is a Toshiba Satellite A305.
  The processor is an Intel Core 2 Duo T5800 2 .00GHz
  There 4.00 GB RAM
  The display adapter is an ATI Mobility Radeon HD 3470
  I am running Windows Vista Service Pack 2, 64-Bit.

  The device in question works perfectly on my other laptop. I tried another USB cable. I uninstalled and reinstalled the USB controllers repeatedly. I tried to uninstall and reinstall the drivers, as well as trying to do multiple versions of the drivers. The device works without error on the Sony laptop, but refuses to work correctly with the Toshiba.

  Any help you could offer would be great.

  Hi ZeroAlex,

  Because you are always faced with the question, I suggest you do an InPlace Upgrade\Repair installation.

  Note Run a repair installation will not damage files and applications that are currently installed on your computer. However, before you perform an Inplace upgrade, you can take a backup of important data. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot.

  To perform an upgrade in-place, follow these steps.
  a. close all running applications.

  b. Insert the Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2 DVD into the DVD drive of the computer.

  c. in the settings window, click install now.

  Note If Windows does not automatically detect the DVD, follow these steps:

  Click on start and type Drive: \setup.exe in the box to start the search.

  Note The placeholder drive is the drive letter of the computer's DVD.

  List programs, click Setup.exe.

  In the settings window, click install now.

  a. click go online to get the latest updates for installation (recommended).

  b. type the CD key if you are prompted to do so.

  c. in the "Windows Installer" page select the operating system you want to update or Inplace.

  d. click Yes to accept the Microsoft software license agreement.

  e. on the which type of installation you want? of the screen, click upgrade.

  f. when the installation is complete, restart your computer.

  For more information, please see the link:

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  Once the upgrade has completed, you must activate your copy of Windows Vista.

  For more information about how to activate Windows Vista, see the following article:

  How to activate Windows Vista.

  Hope this information is useful.

• Problems with wireless mouse when laptop computer HDMI is connected to a TV

  I have a HP Pavilion G series laptop PC, when I connect to the TV using the VGA interface I have no problem, when I connect to the TV via the HDMI so I have the problem. I use a Microsoft 2.4 ghz wireless mouse, laptop connected to an electrical outlet, new batteries in the mouse, if I move the mouse more than 1 foot of the tower top it becomes useless, erratic, moves 6 inches at a time, or not at all, totally out of control. The laptop is about 2 feet from the TV due to the length of the HDMI cable, and I am sitting about 12 feet out in front of the TV with the mouse. As I know, no problem if I find the mouse in 1 foot from the laptop and no problems even at 12 feet awy using the VGA interface. Production of mouse says that the mouse has a range of more than 20 feet. Someone has an idea of what might happen? Last note, I also lookes to the use of the processor at the time and it is only 8%. The mouse model number is 3500.

  Hello said,

  Thanks for the reply.  I'm glad that you were able to solve the problem by replacing the mouse.

  Good luck!

• Need RECEIVER for wireless & mouse keyboard?

  I bought a 'model wireless Comfort keyboard used with Wireless Optical Mouse model #1008 #1027' a real estate sale.  I didn't know that these devices must also a 'receiver '.  Can you tell me where I might be able to buy just the receiver?

  Hi Leeilisa,

  Thanks for posting.

  Yes, need you a receiver for your Microsoft Comfort keyboard and wireless mouse.

  If these do not appear to you when you purchase, you can very well get in touch with the person who sold the devices or may even recall at the same place and ask them if they have the receiver for your devices. Otherwise, you will need to buy another receiver compatible with the model of your keyboard and your mouse in the store of the local computer.

  Kind regards

  Cedric M

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Keyboard not recognized at startup mode standby

  When I wake my PC from sleep, I can't type my password to login. My Microsoft wireless keyboard doesn't seem to be well recognized Wireless mouse only.

  I have to send it to sleep again (by the button on the keyboard that is recognized!) and she wakes again. This can take a long time, whereas before I could type my password the screen flash up.

  The problem began just after I installed SP2 for Vista a few days ago.

  dawman,

  What wireless keyboard Microsoft do you have?  Please post the model number for us.

  If none of the patches I sent you are working and you are sure that the problem started when you installed service pack 2, your only recourse may be to uninstall service pack 2 to see if the problem goes away.

  How to uninstall Windows Vista service packs as a troubleshooting step:
  http://support.Microsoft.com/kb/948537

  Let us know if it helps or if you need further assistance.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.