Need RECEIVER for wireless & mouse keyboard?

Similar Questions

• How to replace the receiver for a mouse (1000) wireless

  original title: wireless mouse (1000)

  I lost my wireless mouse receiver (1000). Is it possible to get another receiver?

  Hi Maury,

  Thanks for posting your query in Microsoft Community and we give the opportunity to help you.

  I suggest you to follow the steps in the article mentioned below and check.

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

  You can also contact technical support for Microsoft Hardware for help on the issue:

  Microsoft Hardware support

  http://www.Microsoft.com/hardware/en-us/support

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• HP Pavilion g7-2269wm Notebook: need drivers for wireless on HP Pavilion g7-2269wm Notebook computer W7 64 bit

  My mother friends have a laptop HP Pavilion g7-2269wm and she dislikes W8 so she bought W7 and put it on. However it can not find the drivers for it, so I did some research and found the drivers for everything but the network controller and wireless.

  I need to know what driver to download or indeed what the wireless card was in place, so I can get the correct driver.  This is for W7 64 bit.

  Thank you

  Mez

  Hello:

  You need this card wireless driver:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5229463 & swItemId = ob_108191_1 & swEnvOid = 4058

  You need this ethernet driver:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103913-1 & CC = US & DLC = in & LC = on & os = 4063 & productOid = 5275620 & sw_lang =

• Need manual for Wireless Keyboard 3000 v2.0

  where can I get a user manual for a 3000 v2.0 wireless keyboard

  * original title - where can I get a manual for a wireless keyboard 3000 v2.0*

  Hello

  To learn more about Microsoft Wireless Keyboard 3000, you can click on this link.

  Let us know if you have other concerns.

• "The center mouse & keyboard" do not see my wireless mouse / keyboard combo

  When I try to open 'the mouse and keyboard Centre' from the control panel or the Start Menu;.    I get the message "No Device Detected"...
  Unplug / plug the USB connector does not help...
  Reloading the drivers does not help...
  The troubleshooting online list doesn't have a link for this problem.

  The mouse and keyboard work (late question I was correcting after taking / disconnect and reload drivers (they were updated).)
  The control function still not open for me to make adjustments to the mouse.

  I investigated further and found that I received an update that does not work with my hardware... While this question the validity of the auto update process (why did I get this?)... The issue has been easily correctable by reinstalling the previous (correct) driver (s) used... So be it...
  D77

• Fix for wireless mouse screensaver causing MS fails in Windows 7?

  I use a laptop computer Lenovo Ideapad U450p, running windows 7 Home premium.  When I use my Microsoft Wireless notebook optical Mouse-mouse 3000, Mgmt. screen standby and power features do not work.  I saw this issue in other posts, and the fix was for the user to get a wired mouse or bluetooth.  Well, my laptop isn't bluetooth, and I don't want to use a wired mouse.  It's stupid that the Microsoft mouse causes the Microsoft operating system screen saver to fail.  Is there any solution to this?  I already downloaded the latest version of the Microsoft intellimouse software, and it does not solve the problem.  Any advice?

  Hi deanan,.

  Try the instructions in the following article.

  The screen saver does not start after the installation of a wireless pointing device:
  http://support.Microsoft.com/default.aspx/KB/913405

  In this article:

  To resolve this issue, connect a wireless receiver, and then go to the following Microsoft Windows Update Web site to check for updates:

  http://windowsupdate.Microsoft.com/ (http://windowsupdate.microsoft.com/)

  Install the update that appears as optional hardware update and carries the following title:

  Microsoft HID Non user input data filter

  
  © 2010 Microsoft Corporation. All rights reserved.

  Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• HP laptop computer 635: need driver for wireless router

  Hello. I had to replace the hard drive of my laptop computer and a new operating system, Windows 7 Pro, after which it cannot connect to the wireless router. It's a router Westell A90-750018-07. I have a Tablet Android working on this particular router and want to download the driver on it and put it on the flash drive to reinstall on my laptop. Is that going to work? Where can I download it? FairPoint is now 14.99 an extra month of me now for a Support technique Premium. They are waiting for me to borrow a laptop to try to help him to do so. They seek to use the android on the phone, but it seemed to complicated with android as a third party. Will this work? Please if someone could help would be great. Thank you.

  You need the driver for the card installed in your 635 wireless. Problem is that you will know which card you have Ralink, Realtek or Atheros. The drivers are all posted on your support page:

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5086540&swLangOid=8&swEnvOid=4059

  If you don't know what wireless card, you need to get the id of the hardware in the Device Manager. Right-click the network adapter, choose Proprietes.dans the window that opens click on the Details tab use the selector drop-down menu to choose the hardware id. After the first string of numbers - or at least the first half of the chain.

• Need driver for Mobile Mouse 3000

  My Mobile Mouse 3000 (model 1359) does not work :( I downloaded the IntelliPoint software and tried to reconnect/synchronization of the mouse (by pressing the buttons at the bottom of the mouse and USB - lights are green fixed) but the mouse still fails.

  So, I go to the control panel (Windows XP 32-bit) looking for mice - it is detected but it says that the drivers are missing. I'm having a devil of a time to find the driver to download... someone can send me a link?

  Thank you!!!

  Yes, just download it again.  CRC errors indicate that there was an error in the Microsoft file transfer.

  If you have trouble, the direct hyperlink that uses the official download page is:

  http://download.Microsoft.com/download/1/3/B/13B6BCAA-603C-4F7C-B03E-2DC23E307D47/IPx86_1033_8.0.225.0.exe

  The file must be 14,709,624 bytes long.  The MD5 checksum is 61d37880daca3f9049925621e199834e.
  The SHA1 checksum is ed011df183df468e11315d785599573c20f8fd12.

  You can read and download the utility of integrity check Checksum of the file not supported inKB841290.

  Please vote if this is useful!  Please, click on Brand or propose as answer if that answered your question!

• Receiver for wireless controller Xbox 360 to PC does not

  I've had my Xbox 360 controller for at least a year now and so far it has been working perfectly. But yesterday, I decided to visit my brother and took my Xbox controller and the receiver with me. I put them in a bag with a controller leads and additional third-party, got in a car to my brother's House. When I got there, we plugged the receiver to the PC, but the receiver does not light. In fact, the computer does even not recognize that a new device has been connected. The next day, I plugged it to my computer for the first time after leaving the House of my brother and it did not work this time either.

  Here is what I tried:

  • I tried all the USB ports available and may conclude that they have nothing to do with the problem. All ports operate as it should.
  • I tried on a total of 3 computers, and none of them recognize be plugged.
  • I uninstalled and reinstalled programs Microsoft Xbox 360 accessories nothing helps.

  In addition, my computer does not recognize an unidentified device, but I don't think that it has nothing to do with the problem at hand. I say this because, in an attempt to solve this problem, I thought it was the cause of it and followed guides to fix. None of them worked, but I did one discovered that when I uninstalled the driver and rebooted the computer: at the time of the restart, I didn't have the receiver plugged, but he always found an unidentified aircraft. This leads me to believe that the unidentified device is not the receiver, but something else entirely (I don't know what this could be good). However, I'm not a genius when it comes to computers, so I could be wrong.

  As three different computers don't recognize even not be plugged in, I suspect the receiver itself may have been damaged when I put the bag with the controllers and the receiver down in the car and refused to work because of this. However, before you start investing money on two new controllers/receivers/alternatives, I want to ask if there are solutions to the problem.

  Hi and thanks for the answer.

  However, additional speculation in recent days, I managed to find the problem. I peeked inside the receiver and discovered that, as I expected, some had been damaged which prevents operation of the receiver. Since then, I made some adjustments and got the spare parts and the receiver and the controller now working again.

  Nevertheless, thank you for help. In the event of more problems with the controller, I'll be sure to have a look at these links.

• Microsoft wireless mouse 1000 and receiver Wireless USB keyboard 800 has been damaged

  I had brought the combo of Microsoft Wireless Mouse 1000 and Microsoft Wireless Keyboard 800 a few months back, but accidentally my Receiver USB got damaged (physically) then, of course, he will not be replaced under warranty then please tell me how can I get new receiver for my mouse and keyboard. If it is not possible to get the receiver just tell me that if I buy the new keyboard 800 then receiver will work for my old mouse and keyboard or not. Any help to solve my problem will be highly appreciated.

  Logical greeting,

  I suggest you to contact the Microsoft Hardware support for assistance.

  How to contact Microsoft if you have questions about your hardware device.

  Before contacting the Microsoft Hardware support, you can check the link below.

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  I hope this helps.

• Will be a work of Microsoft Bluetrack Wireless Mouse 5000 with a Microsoft 3000, 4000, 5000, 6000 USB mouse receiver V2.0?

  I have a Microsoft Wireless Mouse 5000 to set keyboard/mouse Bluetrack. I need a new transmitter/receiver for the mouse as the keyboard is connected to another computer and using the transmitter/receiver provided with the set. My mouse works with a different transmitter/receiver?

  Hello

  1. you have the Microsoft transceiver?

  Try the steps below to connect to Microsoft Transreciver.

  (a) press and hold the Bluetooth button on the bottom of the mouse. If your device is equipped with a battery indicator light, it flashes red/green to indicate that the device is discoverable.

  (b) on your computer, open the Bluetooth software. The Bluetooth software is usually found Control Panel in the start menu. For more information, see open the Bluetooth software below.

  (c) in the devices tab, click Add

  (d) follow the instructions that appear on the screen.

  (e) If you are prompted for a passkey, select no password. The Microsoft Bluetooth mouse devices do not work with a random passkey.

  You can see the following article for more information:

  Connect a Bluetooth device that are neither require a TRANSCEIVER

  http://support.Microsoft.com/kb/952818

  If you use a third-party receiver, you can consult the following link and check.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/76eea589-C264-4e7d-81A9-9b918ef9ffe6

• All of a sudden my wireless mouse has stopped working. The mouse is on and relatively new.

  Tonight my mouse (Logitech) wireless has stop working.  This happened once, and one of my friends told me to remove the receiver, shut my computer down and put the mouse back in.  However, I don't remember the exact steps he gave me.   I tried several different things, but none seems not to work.

  Hello

  What is the model number of the mouse?

  Method 1:

  I suggest you run the Microsoft fixit tool and check.

  Hardware devices do not work or are not detected in Windows:

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

  Support for Microsoft mouse, keyboards, LifeChat, LifeCam & more

  http://support.Microsoft.com/ph/7746

  Method 3:

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows?T1=Tab03

  I would suggest you also contact the Logitech support forum and check.

  http://www.Logitech.com/en-us/support

• Wireless Mouse freezes

  My wireless mouse freezes and it is not the battery.  The only way to make it work is to disconnect the usb for wireless mouse device and plug it in again.  Is there something I can do to remedy this?  It happened on a different mouse I've had for a couple years, so I bought a new.

  Hello

  1. What is the brand and model of the mouse?
  2. don't you make changes to the computer before the show?
  3. what operating system is installed on the computer?

  Method 1
  I suggest you try the steps from the following link:

  Mouse, touchpad and keyboard with Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  Method 2
  I suggest you perform the clean boot. When you clean boot make sure you disable all firewall and antivirus and check if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Note: Microsoft does not recommend that you disable the antivirus protection in most conditions. Disable the antivirus protection that temporarily to restore a computer.
  Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.

• I would add a wireless keyboard to a 'double Receiver USB' for a wireless mouse.

  I have successfully installed the small 'Inteli-mouse' (microsoft mobile 6000 wireless mouse) by using the center of update online that I was sent to when I inserted the installation CD. I like the small USB receiver, is it possible to update the driver, so I can also use my "Microsoft Wireless Keyboard 700 V2.0" with this USB receiver? I am running "Windows 7 Home Premium 64 bit on an HP G71 laptop. I like the wireless keyboard because the screen is great & because of some physical problems I can keep the keyboard closer to me and the screen further when the House. It's not important, I wondered? Thank you, KC973

  Hi KC973,

  Welcome to the Microsoft Answers site!

  You will not be able to add a wireless keyboard to a 'double Receiver USB' for a wireless mouse. To use the wireless keyboard, you can use the receiver that came with the key board and the receiver double USB mouse will not recognize the wireless keyboard.

  Concerning
  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Replacing the old Standard Wireless Optical Mouse... can new mouse- or even model work with old receiver (mouse/keyboard)?

  I have a model 1025 MS Standard Wireless Optical Mouse that has a flashing click function (it often does register any). It is part of a game that uses a keyboard with the same (office-puck-type computer) wireless receiver. I would only replace the mouse with all that is the closest current model (or maybe I can find a refurb or exact same model used, if need be).

  QUESTION: The interchangeable receivers for a given model, or that they can be used with only one unit (mouse) specific?

  I'm guessing that they refer to the receiver, otherwise with a range of 300 ft, chaos would result in an office full these. But maybe also this "overlay" is insider manually first handshake which is known later. If so, then there's a chance? My mouse: model 1025 p/n X 800127-113

  The BIGGEST QUESTION, then maybe: a current 1000 series mouse will work with the receiver old (my model is more made, apparently)? Thank you!

  It depends on the frequency that work on the mouse and the base.  I tried to find info on your old mouse and there is nothing available.  I think would be best to simply select a new wireless mouse.  It will come with a wireless receiver dongle that you can plug into a USB port.  I think you'd have a very hard time finding a new mouse that will use the same exact frequency as the old configuration.  If you're short USB ports to plug an extra dongle you can always buy a USB hub for next to no money. Locutys of Borg

  Resistance is futile

  If you don't succeed the first time skydiving probably isn't for you!