Microsoft Comfort 4500 wired mouse appear to interfere with the mode 'sleep'.
After that I installed the mouse and downloaded the drivers, now the computer won't mode 'sleep'. The screensaver works. I had a similar problem with a Logitech wireless keyboard, but I found the solution to this on their Web site. Any help would be appreciated, thanks.
Hello
Hello
1. don't you make changes on the computer before the show?
2. not this problem occurs when you try to connect to another mouse on the computer?
3. you receive an error message?
Method 1:
You can try the steps in the article of the supplied knowledge base and check.
A computer that runs Windows Vista seems to sleep and then immediately wake
Method 2:
If the problem persists, then perform a clean boot and check if it
is due to any third party software.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.
Tags: Windows
Similar Questions
-
Window - no disc - Exception Processing Message C0000013 interferes with the mode 'sleep'
I get an error message when the computer attempts to enter the mode 'sleep', after the time runs out of screensaver. It will not allow the pc go to the "sleep mode" and if I try all options listed... it starts then the mode "standby". Sometimes, it appears immediately and I can ignore it by continuing the work at hand.
The message is this: Windows - No disk
Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6bf7c
Options: Cancel try again continue
Thank you... Joan
It would be interesting to know what your system brand and model is and what your version XP and the Service Pack, but it's just a fantasy of mine that the Microsoft Answers forum would actually make for such things when a new issue is created. This shortfall in crude in the development of MS Answers forums unnecessarily prolongs solving simple problems.
If you don't see a message like this:
No disk, Exception Processing Message c0000013 parameters 75b6bf7c 475b6bf7c 75b6bf7c
Until you can determine what the 'real' problem is with your hardware, you can disable the pop-up message by making a registry adjustment.
Before making changes to the registry, back up your registry with this free and easy to use tool popular:
http://www.SnapFiles.com/get/ERUNT.html
Click Start, run and enter in the box:
Regedit
Click OK to open the registry editor, navigate to the following key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Windows
In the right pane, check the value of the ErrorMode setting.
If ErrorMode is set to 0, double click on ErrorMode and set 2 (2 = disabled).
Click OK to save the changes, and then click file, exit to close the registry editor.
Any error will always be displayed in case view the log, but you won't see any popups
Reboot your system and check the things now.
http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/win-XP-Pro-Windows-nodisk-error-just-agravating/5e0de54b-D921-4897-BEBC-c882e19a76c0?page=1&TM=1307282043410
-
I just installed a mouse wireless Comfort keyboard 5000, & computer seems to unfold in mode 'sleep'. How can I reactivate it without turning on the system turn off/on?
Thanks to anyone who can help me find my sanity!
Hi Shesarock,
1 - is the computer going mode to "sleep" after the installation of the device to the computer or is unable to put the computer in standby mode?
2. you are unable to get the computer out of fashion 'sleep'?
Refer to the article below and check if it helps.
The problems of wake the computer from sleep mode
http://support.Microsoft.com/kb/266283
The screen saver does not start after the installation of a wireless pointing device
-
Bluetooth mouse does not work after the mode 'sleep'.
My Logitech bluetooth mouse Mouse loses communication after coming out of sleep mode. The mouse does not appear in the devices Panel and will not resync. To retrieve it, I have to restart, and then remove the bluetooth devices control panel mouse and then add the device again.
When installing Win7, he acknowledged the mouse without having to manually provide the drivers. I checked the Logitech website, which doesn't have to download disponibilitepour drivers win7.
The question is not limited to the mouse as a bluetooth speaker system has similar problems with sleep mode.
Someone knows how to solve the problems of Eve Win7 bluetooth?
John
System: Computer laptop Dell M1330, mouse Logitech V470 bluetooth, Win7-64 Edition home premiumFor the mouse in the right mouse click Device Manager, select properties then power management and disable the setting allow turns off to save power.
For other devices, check the equivalent power management settings.
-
I disabled it in the system configuration utility. Now his playground itself so I put it in the trash to stop this, now my screen is dark and won't brighten up more. I can't win for losing. What I can do to force them brighten the monitor I can continuous this NvCpl file that interferes with the games and be able to see once again to good brightness screen.
Hello italian1340208,
This KB article covers the information you need to update your display drivers.
Hope this helps
Chris.H
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
keyboard & mouse freeze after the mode 'sleep', using Windows Vista 64 home premium
keyboard & mouse freeze after the mode "sleep", using Windows Vista 64 home premium. I received once posted this question, an answer of "fix" to a thread that has worked. Unfortunately, I deleted the thread. I swapped the USB connectors for mouse and keyboard, but that didn't change anything. Could someone please re - send the wire? I promise you that I'm deleting it this time.
Thank you very much
E-mail address is removed from the privacy *.
Hi RICH0214,
Follow these methods.
Method 1: Follow the steps in the article.
Device Manager does not display devices that are not connected to the Windows XP-based computer
http://support.Microsoft.com/kb/315539 (applies to Windows Vista)
Method 2: Scan the file system (CFS) auditor to repair corrupted files.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 3: Create a new user account.
Create a user account
http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
If the problem is resolved in a new user account, and then follow the article on how to fix a corrupted user account.
Difficulty of a corrupted user profile
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
How to make text does not interfere with the rollover effects in the image below
I have images that zoom slightly when the mouse passes over them, but I need a title text on them. When the mouse is over the text, it prevents the zoom effect doesn't happen. Is there anyway to make the "invisible" to the cursor text and does not interfere with the effects of overview below? I know that I can make the text in the images, but I don't want the text to expand it, just the image.
You can use a button on the State.
-
VMware Player (VMware Workstation?) Interfere with the connection of the browser
I installed VMware Player (or so I think) on Vista Home Premium 32 - bit SP2. Here's what the Properties tab - & gt; Details shows for "C:\Program VMware Player\vmplayer.exe:
Description of the file: VMware Player
Type: Application
File version: 6.5.4.11892
Product name: VMware Workstation
Product version: 6.5.4.11892
Copyright: (c) 1998-2010 VMware, Inc..
Size: 3.06 MB
Updated: March 31, 2010 23:31
Language: English (United States)I looked for this in order to make the version of the
-what?-VMware Player or VMware Workstation I, and in order to find the right users Guide or manual.But this isn't my problem entirely.
My problem is that I was using my HTTP (browser) client and it has been noticed that I could not connect to certain websites (e.g., http://www.gnu.org/). I can do that at home, through my wireless router (configured for IP) static on the local network. Then I go to work where I use the ethernet connection (not getting any IP by DHCP!... configured for a static IP address on the WAN). I call tech info, that says they can connect. I think it's because I'm using OpenDNS instead of the name of University servers, and then I enter the "Network Sharing Center' and see 'several networks' and THREE Local (ethernet) connections.
After that think "WTF?" and think that 2 local connections and 3 are screwing things up, I disable all local connections and re-enable the connection with the hardware ethernet card. Who has NOT solved the problem of my failed to connect to the web site, that is
http://grub4dos.sourceforge.NET/
The service
http://GSiteCrawler.com/tools/server-status.aspx
reports the HTTP 200 response code very quickly. I use this service to see if the info tech group workplace blocks a web site.
However, I want to learn more about virtual network maps created by the VMware Player (desktop?). I ran the "vmnetcfg.exe" interface and in the Summary tab, see:
Virtual network
Subnet
DHCP
VMnet0 (bridged)
255.255.255.255
VMnet1 (host only)
192.168.136.0
Activated
VMnet8 (NAT)
192.168.219.0
Activated
The guide I want to read should explain what are these local ethernet adapters and they can interfere with the operation of the host outside of the virtual machine.
Thank you
Welcome to the forums!
The guide: http://pubs.vmware.com/ws7_ace26/ws_user/ws_net.html#989125
Where is your problem to browse occur? In comments or host?
VMnet0 is the virtual bridged network. He connected the virtual NETWORK adapter of your guests who are bridge transparently to your physical network device.
VMnet1 is the network invited only, a virtual, where the host and the guests are members of. You see a VMnet1 NIC on the host, because it's the virtual card that the host uses to connect to VMnet1.
VMnet8 is the NAT network. It connects to each stack TCP/IP Protocol on the host computer. Therefore the guest may use any communication device that uses TCP/IP. Th egust is hidden behind the NAT device. This means that all packets leaving the host, coming from the prompt appear to come from the host. VMnet8 virtual card is one that connects to the host on VMnet8 virtual network to enable external communication for the customer.
AWo
VCP 3 & 4
\[:o]===\[o:]
= You want to have this ad as a ringtone on your mobile phone? =
= Send 'Assignment' to 911 for only $999999,99! =
-
Hi.I download Microsoft Security Essentials and installation becomes a problem with the code: 0 x 80070643. If you can help me...
Support Microsoft Security Essentials forums
http://social.answers.Microsoft.com/forums/en-us/category/MSECan I install Microsoft Security Essentials [or any other anti-virus/anti-spyware application] to clean my already infected computer?
http://social.answers.Microsoft.com/forums/en-us/msescan/thread/87058857-D181-4019-a723-efd9a49d9275~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
How a microwave oven interferes with the WIFI signal?
MICRO-WIFI INTERFERENCE
Please explain THAT HOW A MICROWAVE actually INTERFERES with the laptop WIFI signal... How to turn off the oven microwave takes the PC adapter, for example? When the microwave oven is off and don't use it, should also be disconnected? In the equipped cafes in WIFI, are microwave ovens, degrading the quality of the signal?I thank very you much for your comments.JoeThis is caused by the fact that both microwave and most wifi routers operate at a frequency of 2.4 Ghz, there is a setting on some wifi routers that allow you to operate at 5 GHz, but this frequency moves not by walls well, insofar as they interfere, the microwave should not disseminate its frequency outside the oven microwave and most of the routers wifi broadcast in all the directions, radio waves can bounce off the walls and envelope the room and other areas as well, this isn't a line of site, so unless you have your computer very close to the microwave you should not receive any interference at all. or course, if you stick the router inside the microwave.
Hope this helps,-Ray -
Embedded HTML interfere with the editing of Business Catalyst site
Hello
It seems that Google Fusion embedded cards interfere with the site installation in Business Catalyst - anyone els has had this problem? Can you please let me know how I can solve this problem.
The merger plan is an essential of the site and it is not possible to realize the same functionality with the Google widget map. I really hope that there there, someone can help out me, because it is important the customer can change the site without calling me.
The site
All the best
/ R
Hello
As you mentioned that you have inserted html and as a result of which the Assembly does not work, you can try adding this attribute ice by developing mode in British Colombia, and then check to see if that solves the problem.
If you would like more information about develop mode in British Colombia and add code in the same layout, please contact support BC directly as they will provide you with the steps.
Thank you
Sanjit
-
Background operation interferes with the operation of the mouse.
Hi all
I posted what follows on the Windows Update area, but has been achieved here.
I am running Vista and have reformatted and reinstalled three times in the last four or five months. Whenever I installed, the pc works fine for a while then after a windows update, I don't know which, I start getting a lot of substantive activity on my hard drive. This activity relates the mouse so much that sometimes it won't let me move it for 10 to 20 seconds. Even with the keyboard.
After each reinstallation, I load Vipre, to update and run a security analysis. Can I update Vista with each patch MS listed as critical or recommended before installing other software. Now, all that is loaded is MS Office, Adobe Web Premium, Sony Ebook Library and some printer drivers.
Manager tasks indicates little activity, 1-3% on each of the 4 hearts. I restarted in safe mode, just to see if it might be something that takes over and I have the same problem in safe mode. Lock the mouse and the hard disk activity. Again, all the security scans show nothing other than a few cookies.
I saw in other Councils there have been problems with either Windows Update has blocked upwards or with the MS .net framework installed.
Someone has seen this before and if yes is there a solution that doesn't require a reformat and reinstall?
Thanks in advance,
EricHello
Start - type in the search box-> find CMD in top - click right on - RUN AS ADMIN
Start right click - Properties - tab Start - Menu button customize - check the RUN COMMAND - APPLY / OK
Do not forget that the RUN command is not a high command so he could ask for UAC
approval times.Method 3 below shows you how to put a prompt on the desktop and the Start - Menu
very convenient.How to open a command prompt in Windows Vista
http://www.Winhelponline.com/articles/158/1/how-to-open-an-elevated-command-prompt-in-Windows-Vista.htmlI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
I have problems with the slow startup and shutdown and the appearance of the desktop with icons of different size with occasional erratic behavior and unexpected reboots which lead me to believe that I probably have a few errors or corrupted files.
The system is a gateway E6100 recently updated from XP to Vista Home Premium with upgrade software.
Is there a software out there that I can use to clean the entire system?
Hello
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3Hope these helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
I have a problem with an error for the ad blocker that interferes with the video playback
Whenever I try to watch a video, I get this error message:
Oops, you have activated an adblocker!
To watch this episode, please disable it and refresh the page.
I removed anti-ad, refresh the page and the error came again. I have installed firewall bluhell and handicapped who, refreshed the page and the error message still appears. I've added will eliminate them permanently, click on remove and which did not help. I never had these problems before.
Maybe a different extension is at stake. Could test you mode without failure of Firefox? It is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode.
Does not work if Firefox: Hold down the SHIFT key when you start Firefox.
If Firefox is running: You can restart Firefox in Mode safe mode using either:
- button "3-bar" menu > "?" button > restart with disabled modules
- Help menu > restart with disabled modules
and OK reboot.
Two scenarios: A small dialog box should appear. Click on 'Start mode safe' (not update).
That you still get this message?
-
Pro 3 on screen yoga movement interferes with the sound?
Just picked up my new Yoga Pro 3 a few days ago and overall, I love it, except that I just noticed that there is a strange problem when listening to music (be it local or streaming via spotify).
If I review a document in Word, or even when accessing the screen Lenovo Support on the start menu, no scrolling left to right horizontal (whether with the touchscreen or touchpad) causes interference crackling sound. I noticed it would be crackling as the Discussion forum cards were loading and appearing too.
It is not the speakers themselves, physical because this happens through headphones as well.
Strange thing is that it does not occur when you scroll vertically through a document.
Overall, it's not a HUGE problem, but because it is a new portable 2grand, I kinda figured I should ask NOW while it is still new and I haven't had the opportunity to load a lot on it. Just wondering if anyone had ideas OE to prevent this?
See you soon
Maybe you are looking for
-
I can't receive a new update of the iphone on my 4S
As I reset my phone, I can't receive a new update. I'm just stuck in 7.2.1
-
Project connectivity 11n - Equium L350D
The manual for the Equium L350D indicates that it is compatible with "LAN systems... comply with the standard IEEE 802.11 Wireless LAN (RevisionA, B, G or N project)." I tested the connection to a Belkin N1 router using disabled encryption and WPA -
-
string not found in language resource files
I run my sequence and at the end of the test, I've got the popup next instead of failure message (see StringNotFound.jpg) I checked my TestStand 2013\Components\Language\English folder and it seems that I have all the files (EngineString.ini...) The
-
Why doesn't my computer remembers the original town that I create but remebers the name so that I can't use it again in Age of Empires 3?
-
Difficulty of server error 0 x 80048820 & 0 x 80048849
I use Windows 7 Ultimate.