Microsoft dates will not be installed.

Similar Questions

• Install a microsoft update WILL NOT

  For two weeks I was faced with an update from microsoft that will not be installed. That's my faithful old XP.

  The small yellow shield indicating that an update, KB2656353 to be more precise could not be installed...

  only this one, I get used to the shield warning... !! The answer came to me through

  PC'ers useful, but it says that I have to find, uninstall and then reinstall the three services packs and then, and

  only then this update will have. I don't know is what a service pack or where to find a. I do enough

  good on computer maybe I severe dyslexia and her take my 45 minuets just for this deal.

  I guess I'll have to find a service online, I hope, or a professional come to my house to fix my old

  young girl... ! I'm home bound as well and my computer is a salvation for me in many ways. I can't wait that my

  particular problem is rocket science so difficult to repair. I was hoping a link or something can handle.

  Lady... !!

  Duplicate of http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/security-update-for-microsoftnet-framwork11sp1/c052b893-3ed2-4f63-a5f8-60b5efac5da2 (March 3, 2012)

  And http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/a-windows-update-wont-install/a4ced591-c173-451f-bff7-452cd033ed21 (March 2, 2012)

• Microsoft Update will not install error 0 x 643 net Framework 1.1 service pack 1

  error 0 x 643 microsoft net franwork 1.1 service pack 1 is not installed

  See: When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0, or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install '1603'

  If always, the update will not be installed after passing by all the methods shown, contact MS as described at the beginning of the article:

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  MowGreen MVP Data Center Management - update of safety Consumer Services

• Microsoft Picture It! 2001 will not be installed on my computer. The installation program detects that IE 5.5 installation is incomplete.

  Microsoft Picture It! 2001 will not be installed on my computer.  The installation program detects that IE 5.5 installation is incomplete, but I have IE 8.  I'm running Windows XP Version 2002 SP 3.

  My hard drive has been replaced and I can't reinstall Picture It! program.

  Microsoft Picture It! 2001 will not be installed on my computer.  The installation program detects that IE 5.5 installation is incomplete, but I have IE 8.  I'm running Windows XP Version 2002 SP 3.

  My hard drive has been replaced and I can't reinstall Picture It! program.

  ======================================
  You may need to go back to IE6 so that PI2001 to install. Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Security update will not be installed. Patch KB2604092

  KB2604092 update will not be installed. Automatic updates constantly bring this patch even after download. How can I disable this "appear"?

  Hello

  (1) is limited only to this particular update?

  Please check the update history if the update is installed, otherwise check the error message and provide us the same.

  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  If the update is installed successfully, you can check the link below:

  http://support.Microsoft.com/kb/910339

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  Note: Note: data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  If the update is not installed you may read the following article and check.

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

  http://support.Microsoft.com/kb/906602

  I hope this helps.

• automatic security patches/updates will not be installed

  I have several updates automatic safety that will not be installed.  I tried to intall them separately and even disabled my firewall, but they won't install always.  I'm having problems to open my mail in Hotmail as well and have tried all of the fixes suggested in the success of wihout forums. These two problems may be related?  I have installed Mcafee and it's date-said I have no viruses.  Can anyone help?

  Hello

  · What are the security updates that you are trying to install?

  · What is the error message or error code you receive when you try to install the updates, and also when you try to open a mail?

  · Do you remember all the recent changes on the computer before the show?

  The question doesn't seem to be intertwined.

  Search for the installation error code that your computer has saved when the Windows update installation failed. To do this, follow these steps:

  a. Click Start, click all programs and then click Windows Update or Microsoft Update.

  b. on the Windows Update Web site or on the Microsoft Update Web site, click on view update history. A window opens that displays the updates that have been installed or that have failed to install on the computer.

  (c) in the status column of this window, find the failed to install update and then click on the red X.

  (d) a new window opens that displays the installation error code.

  You can check the link below: how to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation: http://support.microsoft.com/kb/906602

  For the problem with windows Live, I suggest you to post your query with the required information in the Windows Live forum. Please visit the link below to find a community that will provide the support you want. http://windowslivehelp.com/

• Photosmart Premium C309-g: the drivers and the printer software will not be installed.

  My network all-in-one Photosmart Premium C309-g worked very well on my desk until recently, when suddenly the HP software could still see and connect to the printer, but Windows 10 could not. I tried to remove the printer and uninstall all associated software, then tried to reinstall the software. Unfortunately, the installation will not get to the point where it starts and then suddenly disappears with no trace of her still running in the background. I can deviate from the default installation and bring to the top of the page to select the components that I want to install, but when I do the button 'ok' on this page does not work. No matter how many times I click on it, the page remains open and the installation will not so fast. If I click Cancel on this page, it disappears and the installation back to the previous page, where I can choose to continue and happen almost immediately out of sight again. This happens whenever I try to install selected software and drivers. I deleted the printer from the devices page in the Panel, I made sure to this it is not is more listed in the Manager of peripheral devices (printers and imaging devices), I removed the Windows 10 print queue and I deleted all the data of the folder under the Program Files (x 86) HP folder on my hard drive. I also disabled Windows Defender and run the installer as administrator, yet none of these steps help the process at all. I have never, in my 20 + years using nothing other than printers HP, encountered a problem like this. I'm used to receive error messages during the installation of software to fail, but I have never had a process simply disappear from the computer without leaving any trace of never having run. I hope that someone out there has an idea, that I have not thought yet, transferring files to my tablet to print from becomes a pain in the rear.

  A man who took the freedom of another man is a prisoner of hatred, he is locked behind bars of prejudices and narrow-mindedness. I am not truly free if I take freedom away from someone else, as surely as I am not free when my freedom is taken from me. The oppressed and the oppressor similar are stripped of their humanity.
  ~ Nelson Mandela

  Welcome to the HP Forums @GarfieldFan1969,

  I understand the printing software will not fully installed for your Photosmart C309 on your system Windows 10, and I wanted to answer with my suggestions for trying to help! Here are my suggestions for you to try. When you are finished, please let me know the results and problems or errors that you may encounter!

  First step: clean boot, restart the PC and try the install again.

  1. start by typing "msconfig" in the search box of Cortana, and then click MSConfig (run command)
  On your keyboard press Windows + R key at same time and type Msconfig in the run window, and then click OK or press ENTER.

  2. now, choose Selective startup

  3. Remove the check of the Load Startup items

  4. click on the Services tab

  5. check "hide all Microsoft Services" and then click on disable all

  6. click apply , then OK

  7 restart the PC and temporarily disable firewalls or antivirus programs

  8 run the Installation Wizard for Windows HP printer to install the printer

  9 turn on the firewall and start services

  Second step: you unregister and re-register the Windows Installer Service:

  1. hold down the Windows key + R to fill the box "Run" and type cmd.exe, and then click OK.
  2. at the command prompt, type msiexec /Unregister , and then press ENTER.
  3. at the command prompt, type msiexec/regserver, and then press ENTER.
  4. at the command prompt, type exit and press ENTER to close the command prompt.
  5. run the Wizard for Windows HP printer installation

  Step 3: run System File Checker Scan (up to 3 times) to repair the corrupted system files:
  1. go to start
  2. type CMD
  3 right-click and run as administrator
  4. to check and repair the OS type sfc/scannow (note the space between sfc and ' / ')

  You may need to run this upward to 3 times to solve all the problems

  When finished, it will say one of three things
  Windows did not find any breach of integrity (a good thing)
  Windows resource protection found corrupt files and repair the (good)
  Windows resource protection found corrupt files but was unable to fix some (or all) of them (not a good thing)

  Try to reinstall the printer.

  Step 4: activate the built-in Windows administrator account

  source

  1. first of all, you'll need to open an administrator mode command prompt by right-clicking and choosing "run as Administrator" (or use the shortcut Ctrl + Shift + Enter in the search box).

  Note that it works the same in all versions of Windows. It just search for cmd and then do a right-click on the icon of the command prompt in the start menu or the boot screen.

  

  2. If you are in Windows 8.x or 10 you can click on the Start button and choose to open a command prompt in this way.

  

  3. now type the following command:

  NET user administrator / Active: Yes

  

  4. you should see a message that the command completed successfully. Log out, and you will now see the administrator as a choice account.

  (Note that this screenshot is for Vista, but it works on Windows 7 and Windows 8 and Windows 10)

  

  You will notice that there is no password for this account, so if you want to leave it enabled, you must change the password.

  Try to reinstall the printer.

  

  Testify of my answer by hitting the thumbs to the top slot

  Click on the button "Accept as Solution" if I helped you reach a solution.

• Feedly Extension will not be installed. Solutions?

  Apparently, some are not having problems with the extension installation (see the dates of the examinations on the sheet), but I am. It installed perfectly on Firefox 21 before (more problems with it later if). In FF 22 is no longer installed now.

  What happens is whatever the method (i.e. install directly from the page of the add ons or extension console built into FF) the extension is not installed. I have download the extension, he invites me to restart. I do it, only to come back to the inability to locate even the button for the extension. It is listed as installed in my overview of the extensions, BUT I can always click on the button install Feedly extension page (https://addons.mozilla.org/en-us/firefox/addon/feedly/). Subsequently it "installs" again, but with the same problem as before.

  I even went back to 21 FF to see if it would work again, but it was nothing not done, now I'm really confused.

  No matter how many times I try (complete uninstall / reinstalling FF did not help) the right extension will not be installed. Is - fixable?

  Version 14 works for me
  https://addons.Mozilla.org/en-us/Firefox/addon/feedly/versions/?page=1#version-14.0.482

• XP - update KB979906 will not be installed

  SP 1 Security Update for Windows 2000 and XP - KB979906 - will NOT be installed. Automatic Instyall keeps trying to install it and it fails. After a few minutes, the automatic installer appears and try to automatically install it again - and again, it fails. I tried to go to Microsoft Updates and install via this method, but it also fails.

  Any ideas as to what is happening here and how I can fix this problem? Obviously if it is to be installed, I have installed it, but if it is not then how to remove this irritation?

  Thank you.

  Any info is greatly appreciated!

  MK

  Hi MasterKhan,

  -You receive an error message during the installation of the update?

  Please note when you install the security update 979906 on a computer that does not have Microsoft .NET Framework 1.1 SP1 installed, the installation of the update fails. Access the link below for more information on the installation of security update 979906.

  http://support.Microsoft.com/kb/2197103/

  Method 1

  Access the link below and download the stand-alone version of Microsoft .NET Framework 1.1 SP1 and install it and check if you can install the update.

  http://www.Microsoft.com/downloads/details.aspx?FamilyID=a8f5654f-088e-40b2-bbdb-a83353618b38&displaylang=en

  Method 2

  If you can not install .NET Framework 1.1 SP1 and update KB 979906, access the link below and follow the steps described in the article and try to uninstall all versions of the .NET Framework on the computer, and then reinstall all the versions of the .NET Framework on the computer.

  http://support.Microsoft.com/kb/923100

  I hope this helps. Let us know the result.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can download (KB967044), but it will NOT be installed. Why?

  I can download (KB967044), but it will NOT be installed. Why?

  Version of Windows, error code, anything?

  Due to a lack of information, pehaps you could try a manual download and installation:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=f6fa110e-45C6-450F-ae47-c89a06e3f762&displaylang=en

  TaurArian [MVP] 2005-2010 - Update Services

• This update that kb2729450 will not be installed on my machine.

  This update that kb2729450 will not be installed on my machine. I am running Windows XP SP3. .NET framework 1.1 of .NET Framework 2.0 SP2 .NET Framework 3.0 SP2 and .NET Framework 3.5 SP1 are also responsible... Why the many versions?

  The yellow security shield appears in the status bar. I click on the shield and the Update window opens. I select the "quick installation" and the installation of the update begins. After a few minutes, the message 'Done '. Here's where she spreads all other "Updates" I ran this machine. In the "Done" window, there is only an option button "close"... No button "restart the computer". I click on the "Close" button, the window collapses and the yellow shield disappears... for about 5 minutes, when he reappears! I check the 'Add Remove Programs' in Control Panel, and I don't see that kb2729450 listed. I've "installed" 5 - 6 times, always with the same result. I was struck with this ransomware FBI 4-5 months ago and it was professionally removed. Since I was very nervous when this machine burps.  Also, since the Microsoft Community page, I ran Kaspersky anti-rootkit.  He has reported no problems with this machine

  Nope, different from the machine, although I think I solved it.  I "restored" to a point three weeks ago.  After that 'Restore' finished, I have rebooted and within minutes the yellow shield pops up... I installed every 5 or 6 that this KB.  After installation, he went through his screen to normal closing with the radio button 'restart now '.  After the reboot, I checked the area add / remove in the control panel and Voila.  They and KB2729450 are all here.  The machine seems to work very well and also faster than its ever been.

• For Windows XP (KB2719985) security update will not be installed. The text "a problem on your computer is preventing the updates being downloaded or installed" is reported

  For Windows XP (KB2719985) security update will not be installed. The text "a problem on your computer is preventing the updates being downloaded or installed" is reported. Fix - it crashes too much with the line "invalid command line" when I try to run it.

  Hello

  1. this problem occurs only with this particular update?

  2 did you change on your computer before this problem?

  You can follow the suggestions and check out them.

  Method 1

  You can reset the Windows Update components.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  Method 2

  You can read the article.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  Method 3

  Step 1:

  Place the computer in a clean boot state.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  a. click Startand then click run.

  b. type msconfigand click OK.
  The System Configuration utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all device drivers and servicesand then click OK.

  When you are prompted, click restart to restart the computer.

  
  Step 2:

  Download and install the update from the link.

  Update security for Windows XP (KB2719985)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30282

  See also:

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

  http://support.Microsoft.com/kb/906602

• Security update will not be installed.

  I'll have to update and install my automatic updates as a security update will not be installed. All I get is "Security Update for Windows XP Media Center Edition 2005 Update Rollup 2 X 86 Edition (KB2628259)" not installed. Anyone has a solution, please?

  Ian

  Ian

  I don't know the answer. It follows a quote from KB2628259.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  For more information about how to contact your local Microsoft subsidiary for support questions with security updates, visit the Microsoft International support Web site:

  http://support.Microsoft.com/common/international.aspx?rdpath=4 (http://support.microsoft.com/common/international.aspx?rdpath=4)

  North American customers can also obtain instant access to unlimited free support by email or unlimited individual chat by visiting the following Microsoft Web site:

  http://support.Microsoft.com/OAS/default.aspx?&PRID=7552

• Safety Office KB2509461 number update will not be installed. Any suggestions?

  Custody of Microsoft Update tries to install the security update KB2509461 number, but it will not be installed. I disabled my antivirus and antispyware, firewall. Any suggestios?

  You have Microsoft Office on your computer?

  I had the same problem of automatic updates now download and install this exact update and fails every time.  I think that the reason why it's a failure, it's that I have Microsoft Office on my computer, so it cannot update what either.

  I'm not quite sure how to do stop.

• Programs install correctly and I keep getting error codes when they stop or will not be installed.

  I can't install programs. I have XP Professional 32-bit.  When I try to update DirectX, I get error messages like "Program has failed the integrity Scan" or he said: he did not like a piece of furniture, or a file in the program has been corrupted. When I try to install Adobe Reader, it stops with error code 13042 and wrote that a program interrupted the installation. I have done 3 installs own to solve these problems, but they continue to flow upward. Validation always works very well. But even some other microsoft programs will not properly download.  How can I fix them?

  Hello

  · What is the number and the model of the computer?

  · What is the service pack installed on the computer?

  Check out the links below and try the same thing no and check if this may help: installation of Flash Player error: "download failed the integrity check (16236.304.443)": http://kb2.adobe.com/cps/512/cpsid_51258.html

  Description and explanation of a CAB file: http://support.microsoft.com/kb/310435

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer: http://support.microsoft.com/kb/2438651