Authentication for switches

Similar Questions

• No AAA authentication for switch

  I'm intrigued by my question. I have a switch on 9 that cannot authenticate with our server GANYMEDE. The configurations are the same as any other switch, but when I try to open a session using the account GANYMEDE + access is denied. This is the configuration for the AAA/GANYMEDE on the switch.

  AAA new-model

  AAA authentication login default group Ganymede + local
  authorization AAA console
  AAA authorization exec default group Ganymede + local

  radius-server X.X.33.XX host
  radius-server key 7?

  I deleted the aaa configuration and then reconfigured it as well as the information from the server RADIUS and no authentication Ganymede. I gave the Ganymede interface should use, but same result. Any ideas?

  Thank you

  Robert

  Robert,

  Please make sure following

  -Radius server is accessible from the switch and port 49 is not blocked.

  S ' it is layer 3 switch, then make sure to configure the interface source ip Ganymede XXXX (Interface IP set in radius server)

  -Check the secret key

  If the problem is still there then please get

  Debug aaa authentication

  debugging Ganymede

  Kind regards

  ~ JG

• RADIUS authentication for the switch using ISE

  Hi guys,.

  Someone did he do Radius Authentication for switch cli connection using ISE?

  We did it in our environment with ISE, but it is a challenge to give read-only access / Priv-1.

  If some users know the enable password, they can use and earn full privilege.

  Anyway to get around this other than to change the enable password?

  We have thousands of switches and won't change on each of them.

  If you have another method please advice.

  Thank you in advance.

  Well, you can set the "enable" function also be controlled via the AAA server with the following command:

  AAA authentication enable... This way server AAA will be checked for authentication for the secret to activate and use the local database as a last resort

  I hope this helps!

  Thank you for evaluating useful messages!

• AAA RADIUS authentication for the only user group

  Hello

  I use ACS3.1 and tries to use authentication radius for all network switches in my company.

  Meet the im problem now is how to restrict only a user group to access the connection/exec switches? It seems that all user IDS in my acs able to telnet (user access) to the switch (using their login credentials).

  I would like to limit still from telnet by using their ID except administrator group.

  Counsel on how this is possible.

  TKS!

  The GBA, you need admin users in their own ACS group separated, leaving other users in their own group also.

  Change the group that contains the users you don't want to give access to and under the heading of restricted access network (OAN), in "Group defined Network Access Restrictions", check the "Define based on IP access restrictions", choose "Rejected the call point" and enter switches in the table below (put a * in the port and address).

  This prevents standard users authentication to switches. You can add all your switches in a group of network devices (NDG) to this, then you have to add that, in the section NAR rather than adding each switch individually.

• Test command of the AAA for EAP - TLS authentication for wireless users

  Hi all

  Can anyone suggest me the test command to verify the eap - tls authentication for the Cisco WAP's wireless.

  If it's an authetication jump we can use the command to test the connection below

  Radius of group aaa Testwap-01 #test [email protected] / * / o4 & yJ) NoL$ new-code %0
  Trying to authenticate with the server radius group
  User successfully authenticated

  But eap - tls is not delivered with the password. He insists that for the user name.

  We strive for remote location then test remotely before production.

  If someone help pls in that if we have a command to test or debug command to test this authentication.

  EAP - TLS requires a client certificate. How can you have a simple command that analysis without loading any certificate on the router/switch? It does not exist. This is why eap - tls is not considered an easy to deploy eap method: because it can go wrong on several levels.

  The aaa command test performs a PAP authentication, therefore, it tests the connectivity of the base RADIUS and name of user and password.

  If it works, the only thing that can break for eap - tls are certificates, as well as the radius server will be able to tell if something worng.

• Basic authentication for the OSB exposed as a Rest Service

  Hi all

  We expose OSB Service as a Rest Service to the customer. Need to add basic for the client authentication. In the HTTP transport Service proxy, we have enabled basic authentication. However, we do not know how to proceed. We want to take care of the authentication section in the BSO it itself, so what should be our next step for her? How to extract the authentication information for the request and where to add the check? Is there an easy way to integrate with authentication AD in OSB?

  Hello

  OSB will do authentication for you, no need to make something of yourself. Just move the radiobutton control to basic authentication. It uses the Weblogic domain in the to do. OSB will get the name of user and password of the authentication HTTP header property and validate it against weblogic. If weblogic confirms as a name of user and password valid, OSB running the proxy. Any valid user in weblogic will do, there is no authorization: so no way to limit to a specific user. This means that to connect to AD you must configure using Weblogic. In the field of weblogic, you can add any AD or any LDAP as authenticator.

  With the help of its also possible to validate on a particular user using the UserToken GOSA strategy. You can also use GOSA do BasicAuthentication by applying the specific policy. But GOSA only supports basic over SSL authentication, not simple basic authentication.

  By the way: for BA on a Business Service: you must create a ServiceAccount object with the specific user name password and assign to specific BusinessService. You can create a surveillance society by environment, each in a particular folder of dev/test/ACC/prod. Then use a customization file to switch between them.

  Kind regards
  Martian

• Winner 8,1/firefox there are tabs above and below windows. In Win 10/firefox, there is now windows below for switching windows - how can you do that now?

  n Win 8.1/firefox it were the tabs above and below windows.
  Win 10/firefox, there is now NO windows below for switching windows.
  How to you switch windows (tab groups) now?
  Windows Firefox 39.03 10

  On the first program that I started after the launch 10 new windows, I can't do what I have been doing it for years and I can not understand.

  I hate the changes of major operating system.

  plugins installed

  • Adobe PDF plugin for Firefox and Netscape 15.8.20082
  • Garmin Communicator plugin 4.1.0.0
  • GEPlugin
  • Google update
  • HPDetect
  • Deploy Script NPRuntime plugin Library for Java (TM)
  • Next-generation Java plug-in 11.40.2 for Mozilla browsers
  • Plugin to detect Nero Kwik Media.
  • Nitro PDF plugin for Firefox and Chrome
  • Shockwave Flash 18.0 r0
  • VLC Web Plugin 2.1.3 media player
  • Detector of presence of WildTangent Games App V2
  • NPWLPG

  Is the problem that the Windows task bar is hidden by the Firefox window, or that changes to the taskbar make it impossible to change the windows?

  If the taskbar are hidden by Firefox, it is possible that Firefox is in full screen mode. The F11 key toggles between full screen and normal views.

  Another potential problem is that Firefox sometimes seems to collect data of erroneous screen size of the operating system and that the window of Firefox too large. You can rename the relevant settings file to see if that helps.

  Open the settings folder (AKA Firefox profile) current Firefox help

  • button "3-bar" menu > "?" button > troubleshooting information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table of the page, click on the view file"" button. This should launch a new window that lists the various files and folders in Windows Explorer.

  Leave this window open, switch back to Firefox and output, either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  Pause while Firefox finishing its cleanup, then rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old.

  Launch Firefox back up again. Windows normally appear again?

  To restore the missing bars, you can use one of the following methods to view the list of the toolbar, and then select the desired bars it:

  • Right click on a place empty on the tab bar (or the button '+')
  • Press the Alt key to activate the classic menu bar > view > toolbars
  • in customize mode > show/hide toolbars (see: Customize Firefox commands, buttons, and toolbars)

  To activate the menu bar, toolbar bookmarks or other bars, click it in the list.

• Why gesture to turn on my trackpad behaves not as before for switching between tabs when it works the same with all other programs besides Firefox?

  Why gesture to turn on my trackpad behaves not as before for switching between tabs when it works the same with all other programs besides Firefox?

  I changed the subject: config to make the rotation gesture to move between tabs and it worked great for well over a year. It now behaves properly, as described here:

  https://Bugzilla.Mozilla.org/show_bug.cgi?id=877598

  It used to be very controllable move a tab on, now it is erratic and moves quickly and the unexpected tabs regardless of the slowness, I do the gesture of rotation. It's the main reason I use Firefox on Chrome and I will continue to do so unless there is no solution for this.

  Just put the browser.gesture.twist.threshold to something around 15-25.

• Y at - it a keyboard shortcut for switching windows?

  I see that there is a keyboard shortcut for switching tabs in a window of Firefox, but I would also like one to switch between the windows of the browser. I guess it's easier on Windows, where each browser window kind of behaves as an application separate, but on the Mac OS, an application can have multiple windows. Thus, the operating system does not provide supported to switch between browser windows via a keyboard shortcut; It allows to switch between applications, which brings all of the windows in the application target forward.

  To switch between using Firefox windows: Cmd (Shift) + ~ (Tilde)

  See http://www.danrodney.com/mac/#windows

• HP20002D19WM came with no software (cyberlink) key and certificates of authenticity for windows

  I just bought the HP20002D19WM, which came with no software (cyberlink) key and certificates of authenticity for windows. I can't use any program cyberlink with a key number to enter. Also if I would give for somereason I wonder in my number of windows I would not be able to since I have ever trevieved it

  This is the original factory specifications for your laptop HP 2000-2d19WM. All Cyberlink OEM software should work without key, because it is not mandatory for the installed OEM mass products. Regarding the Windows product key, see Activation of Windows 8 product;

  • OEM Activation 3.0 (OA3) at the factory. A digital product key (DPK) is encrypted and installed on the motherboard BIOS during the manufacturing process. Windows 8 will be ignited automatically the first time that the computer is connected to the Internet. With systems activated by OA3, most of the computer's hardware can be replaced without the need to reactivate the software from Microsoft.

• Cannot enable authentication for 802. 1 x

  Original title: I can't change the properties on my wireless adapter to get the authentication of 802. 1 x. I get the error message.

  I get an error message when I right click on my wireless connection. I want to access authentication of 802. 1 x. need help, please.

  You see the error of not being able to find a certificate because you select 802.1 x.

  For a home wireless network, you don't want the box "Enable IEEE 802. 1 x authentication for this network"to check.

  What was the problem that you entered in the Properties dialog box of your first wireless adapter?  Normally, see you the list of available wireless networks, select one, click Connect and enter the password when you are prompted.

  I suggest that return you to the "Wireless networks" tab of the properties of the wireless adapter dialog box (it should look like this) and "Delete" all entries in the list of "Favorite networks."  Then go to list "View wireless networks" and connect from there.

  In addition, the foregoing assumes that you use Windows to configure your wireless network card (see the checkmark in the screenshot linked above).  If you use another utility - that came with your computer or your wireless adapter - you should disable that and activate windows (using the checkbox) or read the guide of the user for the utility to determine how to set up your wireless security.

• Authentication for wireless access

  Hello

  The independent implementation of a wireless network is configured as authentication open with an TKIP encryption algorithm. The client key management is set to WPA PSK.

  What exacly is authentication for? I see that the MAC and the EAP are available options. These options to block or to allow real wireless devices that connect to the AP?

  The next thing I see is the authenticated Key management Client and I use WPA PSK. Exactly, what happens once I get this PSK from the client? It is used only to encrypt data?

  Thank you

  Kevin

  Hello

  Here is the link to configure the WLC with LDAP for EAP-FAST...

  http://www.Cisco.com/en/us/products/ps6366/products_configuration_example09186a008093f1b9.shtml

  About the difference between EAP and PSK, the link I provided in my previous post will help you. different stages through which is involved all its EAP and WPA... Andgoogle search will provide you with several good links as well!

  Let me know if that answers your question and please do not forget to note the useful messages!

  Concerning

  Surendra

• ACS5: method of different external authentication for each user account

  ACS4 I could specify a different external authentication for each user account. I'm trying to find a way to do the same thing to the ACS 5? When I go under identity in Access Services, I see the system requirement: username I can use to identify the user who logs in, so that I can directly to a source of different identity, but the separate political configuration for each user is very inconvinient and would require hundreds of policies, in our case.

  I was hoping that we can create a kind of attribute for each user. SysAdmin > Configuration > dictionaries > identity > internal users. I created the new attribute called 'Storage of identity' with the enumeration type, which has 4 values: internal, Entrust Token, Token RSA, counts AD and checked the box "add a political Condition." I can then go under each user and select the storage of identity for each user. But now I can't find where I can use under part of identity of an access policy. I can use it under "Group mapping" but that maps to one group and not to an identity store. I need to use it under the identity somehow, but I can't find how.

  Hello Roman,

  The attribute you created will be available when the user is authenticated through internel ID store, so that you cannot use to select the store ID.

  The best way to do this would be to use other attributes to differentiate the identity store.
  Allows you to create a sequence of identity store so that for each user, ACS will try to authenticate by using multiple identity store.

  For example, you can use these:

  Network status

  > End Station filter

  > Device filter

  > Devide filter Ports

  Here you can import filters from a file and it would therefore be more scalable.

  Hope this helps.

• For Cloud SGD LDAP authentication for users and administrators

  Hello.

  I recently completed the installation of my new cloud of SGD 12.1.0.3 on Linux 6.4 (on a virtual machine).

  My question is if it is possible (and how) to enable authentication for new administrator SGD through LDAP accounts?

  We have already our VM hosts configured to allow LDAP authentication to theirs, but how to configure WHO to enable LDAP authentication even as users of server?  Because users are in LDAP, they do not have a local account on the servers, and we do not necessarily want users of WHO in order to connect the servers anyway.

  One of the objectives to use LDAP is that we want to allow users to have only to change their domain/LDAP password and everything else is updated.

  I see that when an account is created in the OMS, the user is created in the repository of OMS database.  I really want to restrict not know them to log directly in the database, but do how this is possible.  Can we still use pupbld for this?  Probably not...

  I read the book below the Oracle documentation, but it is for SGD 11.1 and I'm under 12.1.

  But the same year, he was not very descriptive about how to set up.

  It sounds almost as if you had to take the decision to use LDAP for the installation of beginning of WHO.

  I hope not, and I do not remember that as an option that I have installed the SGD.

  Configuration of Oracle Enterprise repository to use external authentication tools - 11 g Release 1 (11.1.1.7)

  Yes, you can still integrate with LDAP.   Please see the documentation here

  http://docs.Oracle.com/CD/E24628_01/doc.121/e36415/sec_features.htm#CJAGHGAH

  EM use WLS for authentication, so everything that is supported by this version of WLS will work.  Documentation received instructions for OAM/OID/HAD and Active Directory are specified.

  Users can be changed to type external if they are already created in the repository with the appropriate connection name.   Otherwise, new users can be created.

  Also be sure to examine the external roles option, which allows you to map a LDAP group to an external role in EM by using the same name and automatically assigning the privileges required by this group.

• Authentication for 6.1.1 - IAuthenticationStrategyAdmin

  It seems that any authentication for 6.1.1 + must also implement IAuthenticationStrategyAdmin.  Is this correct?

  Yes, it's true.