Microsoft. NET Framework 2.0 Service Pack 1

Similar Questions

• Error installing Microsoft NET Framework 3.5 Service Pack 1 Setup program has detected that this computer does not meet the requirements to install this software

  I need to install Microsoft NET Framework 3.5 Service Pack 1, as it is necessary to perform a Dell diagnostic Test, but I've been advised that: Setup has detected that this computer does not meet the requirements to install this software. Requirement: Windows install 3.1.

  However, when I look at the download page of Windows Installer 3.1 is not actually as for XP with SP3. I tried anyway and: Setup has determined that the version of Service Pack for this system is newer than the update you are applying. There is no need to install this update. Well actually it is there...

  Is there a way to get around this?

  See below articles for solution

  1 system requirements for the .net framework

  http://msdn.Microsoft.com/library/8z6watww.aspx

  2 download links for .net framework

  http://www.Microsoft.com/net/download

  or

  http://msdn.Microsoft.com/en-us/library/5a4x27ek

  3. top 8 resources for .net framework

  http://www.Microsoft.com/net/itprofessionals

  4 dependencies and Versions of .NET framework

  http://msdn.Microsoft.com/library/bb822049.aspx

  5 frequently asked questions
  http://msdn2.Microsoft.com/en-us/netframework/aa497323.aspx

  6. management of versions, compatibility and run side-by-side in the .NET Framework
  http://msdn2.Microsoft.com/en-us/netframework/aa497340.aspx

  Good luck

• try to install microsoft net framework 2.0 service pack 2

  I was in microsoft.com site but can't find a download for this the only download I can find are for 64 bit and 86 bit version wont work with my windows XP PROFESOAL I HAVE 32 BIT VERSION CAN someone please until ME WHERE to DOWNLOAD if IT GERARDINE to DETERMANATION AND PAITENCE I GIVE UP THE PROGRAM BUT I DOWNLOADED needs THIS FRAMEWORK TO WORK SAID ITS IN MICROSOFT WEB SITE BUT CANT FIND IT thank you.

  Hi BITYH DROPPED,

  Here is the link for. NET Framework 2.0 Service Pack 2. 32-bit is also referred to as x 86 versions of Windows.

• I have microsoft net framework 2.0 service pack 2... and msnf 3.0 sp2... and msnf 3.5 sp1... and the microsoft compression client pack 1.0 for windows... should I all of this on my computer?

  I have microsoft net framework SP2 2.o... and sp2... msnf3.0 and msnf3.5 sp 1... and the microsoft compression client pack 1.0 for windows... should I all of this on my computer?

  See:

  What is the .NET Framework, and I need all these versions?
  http://ask-Leo.com/what_is_the_net_framework_and_do_i_need_all_these_versions.html

• NET framework 3.5 service pack 1 & net framework 3.5 family update for the net version 2.0 to 3.5 (kb951847) x 86(update1 of 1)

  NET framework 3.5 service pack 1 & net framework 3.5 family update for the net version 2.0 to 3.5 (kb951847) x 86(update1 of 1)

  Hello

  1. what exactly is the problem you are having?

  2. do you have an error code?

  3. do you get an error message?

   
  I suggest you install the standalone product of the update and check if it helps.
  
  Microsoft .NET Framework 3.5 Service Pack 1
  You can download the stand-alone version of the link below: Microsoft .NET Framework 3.5 Service Pack 1:
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=22
  Microsoft .NET Framework 3.5 Family Update for Windows XP x 86 and Windows Server 2003 x 86
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=10006
   

  For reference:

   
  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
  
  http://support.Microsoft.com/kb/923100
  Problem installing .NET Framework 3.5 or 3.5 SP1 on checked, or pre-release versions of Windows Vista or Windows Server 2008:
  http://blogs.msdn.com/b/astebner/archive/2008/08/25/8895729.aspx
   
  I suggest you to give us more information about the issue to have a better understanding.
   
  I hope this helps.

• Microsoft Update will not install error 0 x 643 net Framework 1.1 service pack 1

  error 0 x 643 microsoft net franwork 1.1 service pack 1 is not installed

  See: When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0, or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install '1603'

  If always, the update will not be installed after passing by all the methods shown, contact MS as described at the beginning of the article:

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  MowGreen MVP Data Center Management - update of safety Consumer Services

• How to fix error code 0 x 643 during update installation Microsoft. NET Framework 3.5 Service Pack 1

  I am trying to install the Microsoft Update(Windows XP) Microsoft. NET Framework 3.5 Service Pack 1 and maintain it, getting a message error code 0 x 643. Is there a solution to this problem? Help, please...

  See if this sugesstion can help you:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/4a6ea38b-9104-4547-8802-bc94bb6127a9 >

  04/05 / 1110:55: 33 am

• I get an erroe OX643 code when you try to update net framework 3.5 service Pack 1

  I bought dragon naturally speaking premium 11.5 version when you try to install the software, it is significant that I need to update net framework net framework 3.5 service pack 1. I always get the error message about the failure of the update. I get the error code is OX643. I tried to install the framework net 2.0 also and get an erroe OX80131107. The computer is a hp pavilion media center windows xp service pack 3. The computer meets all the requirments for the dragon software to use, but I can not install. This computer is used just to the House and not for businesses. I don't know why there even any net framework in it. I bought the computer new in 2005

  Hello

  You can try the steps in the link below to fix the problem.

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".

  http://support.Microsoft.com/kb/923100

• unstall Miscosoft NET framework 2.0 service pack 2 because I also have 3.0 SP2 and 3.5 SPI

  unstall Miscosoft NET framework 2.0 service pack 2 because I also have Miscosoft. NET Framework 3.0 service pack 2 and 3.5 SPI

  Hello mortgage by crosswind,

  I would not uninstall earlier versions of the .NET Framework on your computer. Some applications are written only search a specific version, therefore, the application may not work if you delete the old version.

  Please click on item below to view the article dealing with this information.
  KB Article ID: 829019 -benefits of the Microsoft .NET Framework

  I hope this helps answer your question.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I can't update net framework 3.5 service pack 1, it is rejected

  I managed to download sp3. Now, the update does not accept (kb951847) x 86 update download.

  I got other downloads to my great surprise, however. It seems to have something to do with the net framework 3.5 service pack 1.

  KB951847 is an option, not the security update. Feel free to hide it.

  PS: Why wasn't installed WinXP SP3 years?

• Windows XP does not level net framework 3.5 service pack 1 or service pack 2. Error code 80070673. Also, don't look for new updates - error code 80070490.

  My windows xp tried to upgrade with the 3.5 framework - net framework 3.5 SP1 update family (KB951847) x 86 since 07/08/09.  History shows that he has failed every time.  He also tried to install service pack 2 (KB948465) since 07/08/09 and has failed each attempt.  When I try to check new updates, it says "windows has not can find new updates" with an error code 80070490.  When I try to upgrade with the framework 3.5 service pack 1, it says "some updates were not installed" with an error code of 80070673.  History shows that all other updates have been installed successfully.  Please let me know what I need to do to fix this problem.

  Read the article (I posted the URL): http://support.microsoft.com/kb/958044

  You will need to fix the OS before trying to fix the rest of your problems. If the OS is unstable, then nothing else will matter. Make sure you have backups up-to-date of all your personal stuff and know where the product keys etc in case you should reinstall. That your OS is stable/fixed you can follow instructions from PA Bear re updates of the framework.
  
  Windows 2000, Windows XP and Windows Server 2003 to resolve this issue, use the System File Checker to check that the correct versions of the file system are present. To do this, follow these steps:

  1. Click Startand then click run.
  2. Copy and then paste (or type) the following command in the Open box, and then press ENTER:
     cmd
  3. At the command prompt, type sfc/scannow, and then press ENTER.

     Note If you are prompted for your Windows XP CD, insert the CD into the CD drive.

  4. Once completed the System File Checker, try installing updates again.

  For more information about the System File Checker, click on the number below to view the article in the Microsoft Knowledge Base:

  310747 (http://support.microsoft.com/kb/310747/) Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  If the System File Checker does not resolve the problem, you must perform a repair of Windows XP installation.

  For more information about how to perform a repair of Windows XP installation, click the number below to view the article in the Microsoft Knowledge Base:

  315341 (http://support.microsoft.com/kb/315341/) how to perform an upgrade on the spot (reinstallation) of Windows XP

  Once installation is complete repair, try again to install updates.

  Note Run a repair installation will not damage files and applications that are currently installed on your computer. TaurArian [MVP] 2005-2010 - Update Services

• NET framework 2.0 Service Pack 2 update

  the automatic update keeps sitting on my task bar, & keeps asking me to update my microsoft net framework

  c:\955bccc2e2e599c7eec1db223108\wcu\dotNetFramework\dotnetfx20\

  I tried to fix, etc.

  I run XP Service Pack 3

  Hello

  I suggest that you check the troubleshooting provided in the links below steps to uninstall .NET framework and then reinstall them.

  Note:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  How to back up and restore the registry in Windows

  You can use the removal tool to uninstall the. NETFramework 2.0

  For difficulty .NET Framework removal tool install failures

  http://blogs.msdn.com/b/astebner/Archive/2005/04/08/406671.aspx

  To remove manually the NET Framework 2.0 see the link provided below.

  How to manually clean a failure .NET Framework 2.0 installation

  http://blogs.msdn.com/b/astebner/Archive/2005/04/16/408856.aspx

• 1706 error trying to install Net Framework 1.1 Service Pack 1 and finally 10% demand netfx.msi file, which I did not?

  I try to install the update for Net FrameWork 1.1, the SP-1, at the end of the installation fails with an error 1706 code because I can't find netfx.msi install file. I don't have a disk. Am running XP Pro SP3. Any help would be greatly appreciated!

  Thank you

  Frank

  Hi HarrytheHat,

  1. did you of recent changes on the computer?

  2 are you able to install some other updates on the computer?

  3. do you have security software installed on the computer?

  See the below Microsoft article and try the steps mentioned, check if it helps.

  You may receive an error message "Failed to install" or "error 1706" error message when you try to install the .NET Framework 1.0 SP3

  http://support.Microsoft.com/kb/908907

   

  If the steps mentioned in the article above do not, then refer the article below and try the steps mentioned, checl if it works.

  How to troubleshoot installation issues of the Microsoft.NET Framework 1.1 in Windows XP or Windows 2000

  http://support.Microsoft.com/kb/824643

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• error code 0 x 643, install net Framework 3.5 service pack

  Original title: update errors

  I can't update keep getting error code 0 x 643 net Framework 3.5 ServicePack.

  Hi frank773,

  ·         You try to update .net framework?

  ·         You are able to install some other updates?

  ·         What is the service pack installed on your computer?

  Follow the steps in the link below and check if this may help: when you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603":http://support.microsoft.com/kb/923100

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I keep getting error code 643 what's wrong! . NET FRAMEWORK 1.1 SERVICE PACK 1

  Is there a quick fix?

  Uninstall all the framework & reinstalled tried to install always the same error code 643.

  Help!

  Quote your full version of Windows (for example, WinXP SP3;) Windows XP 64 - bit SP2; Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643 (23 Oct-09)
  http://support.Microsoft.com/kb/976982

  Step #1 => foremost, note what version of .NET Framework is installed:

  How to determine what version of the .NET Framework is installed and determine whether the service packs have been applied
  http://msdn.Microsoft.com/en-us/KB/kb00318785.aspx

  Step #2-online now see resolution method 2 in this related KB article: http://support.microsoft.com/kb/923100

  After running the cleaning of .NET Framework (not the Windows Installer Cleanup utility) tool, reinstall all the versions of the .NET Framework (but the ones you noted in #1 above) manually using the download links on the page, and then run Windows Update manually install security updates for same.

  NB: If you remove the .NET Framework 3.5 (SP1) by using the tool, reinstall .NET Framework 3.5 will also install .net Framework 2.0 SP2 and 3.0 SP2. Then, Windows Update will offer .NET Framework 3.5 SP1.

  IMPORTANT! =>, If you remove the .NET Framework 3.5 (SP1), reinstall your version of .NET Framework in the following order:

  1. the .net framework 3.5, then...
  2 .net framework 1.1, then...
  3 .net framework 1.1 SP1

  NB: KB923100 makes reference to this page: http://blogs.msdn.com/astebner/archive/2006/05/30/611355.aspx.  Please read ALL as well as the related http://blogs.msdn.com/astebner/pages/8904493.aspx before using the .NET Framework cleanup tool.

  Step #3 => Check-in at Windows Update and install the critical updates of security offered.

  =========================

  What to do if other .NET Framework configuration troubleshooting procedures do not help:
  http://blogs.msdn.com/astebner/archive/2008/03/07/8108332.aspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft