Microsoft VPN client through 857 router ADSL
Hello
I've set up an adsl router 857 with CP Express (web interface) with a standard firewall and NAT configuration.
router seems to work very well apart from connections outbound pptp.
I can't use the MS VPN client to connect to our PPTP server in a remote location. I don't try to use VPN on the router 857, allow just to pass through of my laptop computer behind the router to an external vpn server.
Instantly, the client goes to "Check Userbane and password" then crashes on this during a minute or two before failing.
Any suggestions would be apprecated.
Thank you
Gordon
Hello
Try this.
http://www.Cisco.com/en/us/Tech/tk827/tk369/technologies_q_and_a_item09186a00800946ef.shtml
and this
http://siskiyoutech.com/blog/?p=78
Finally, that
http://www.Cisco.com/en/us/Tech/tk827/tk369/technologies_configuration_example09186a00800949c0.shtml
Finally I would like to know this help and write it down.
Rgds/DP
Tags: Cisco Security
Similar Questions
-
Routing problem between the VPN Client and the router's Ethernet device
Hello
I have a Cisco 1721 in a test environment.
A net 172.16.0.0/19 simulates the Internet and a net 192.168.1.0/24 simulates the net, the VPN tunnel must go to (intranet).
The net 172.16.0.0 depends on the router 0 FastEthernet, Intranet (VPN) hangs on Ethernet 0.
The configuration was inspired form the sample Configuration
"Configuring the Client VPN Cisco 3.x for Windows to IOS using Local extended authentication"
and the output of the ConfigMaker configuration.
Authentication and logon works. Client receives an IP address from the pool. But there's a routing problem
side of routers. Ping client-side - do not work (the VPN client statistics that count encrypt them packets, but not to decrypt).
Ping the router works too, but decrypt and encrypt customer statistics in VPN packets count progressive
(customer has a correct route and return ICMP packets to the router).
The question now is:
How to route packets between the Tunnel and an Ethernet device (Ethernet 0)?
conf of the router is attached - hope that's not too...
Thanks & cordially
Thomas Schmidt
-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.- snipp .-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.
!
version 12.2
horodateurs service debug uptime
Log service timestamps uptime
encryption password service
!
!
host name * moderator edit *.
!
enable secret 5 * moderator edit *.
!
!
AAA new-model
AAA authentication login userauthen local
AAA authorization groupauthor LAN
!
! only for the test...
!
username cisco password 0 * moderator edit *.
!
IP subnet zero
!
audit of IP notify Journal
Max-events of po verification IP 100
!
crypto ISAKMP policy 3
3des encryption
preshared authentication
Group 2
!
ISAKMP crypto client configuration group 3000client
key cisco123
pool ippool
!
! We do not want to divide the tunnel
! ACL 108
!
Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
!
Crypto-map dynamic dynmap 10
Set transform-set RIGHT
!
map clientmap client to authenticate crypto list userauthen
card crypto clientmap isakmp authorization list groupauthor
client configuration address map clientmap crypto answer
10 ipsec-isakmp crypto map clientmap Dynamics dynmap
!
interface Ethernet0
no downtime
Description connected to VPN
IP 192.168.1.1 255.255.255.0
full-duplex
IP access-group 101 in
IP access-group 101 out
KeepAlive 10
No cdp enable
!
interface Ethernet1
no downtime
address 192.168.3.1 IP 255.255.255.0
IP access-group 101 in
IP access-group 101 out
full-duplex
KeepAlive 10
No cdp enable
!
interface FastEthernet0
no downtime
Description connected to the Internet
IP 172.16.12.20 255.255.224.0
automatic speed
KeepAlive 10
No cdp enable
!
! This access group is also only for test cases!
!
no access list 101
access list 101 ip allow a whole
!
local pool IP 192.168.10.1 ippool 192.168.10.10
IP classless
IP route 0.0.0.0 0.0.0.0 172.16.12.20
enable IP pim Bennett
!
Line con 0
exec-timeout 0 0
password 7 * edit from moderator *.
line to 0
line vty 0 4
!
end
^-^-^-^-^-^-^-^-^-^-^-^-^- snapp ^-^-^-^-^-^-^-^-^-^-^-^-^-^-
Thomas,
Can't wait to show something that might be there, but I don't see here. You do not have the card encryption applied to one of the interfaces, perhaps it was not copied. Assuming your description you do it, or should it be, applied to the fa0 and you are connected. Try how you ping? Since the router or a device located on E0? If you ping the router, you will need to do an extended ping of E0 to the ip address of the client has been assigned. If your just ping the router without the extension, you will get sales and decrypts that you declare on the client. Have you tried to ping from the client to interface E0? Your default route on the router is pointing to fa0? You have a next hop to affect? You have several NIC on the client pc? Turn off your other network cards to check that you don't have a problem with routing on the client if you have more than one.
Kurtis Durrett
-
AnyConnect VPN Client on IOS router
Hi guys, I configured AnyConnect SSL VPN on Cisco 2811 router. It works perfectly when I login via web and customer execution of secure mobility. However, when I connect directly from the mobility client connection fails. He does not even ask me user name and password.
----------------------------------------------------------------------------------------------------
Mar 7 21:36:47.613: % SSLVPN-5-SSL_TLS_CONNECT_OK: vw_ctx: UNKNOWN vw_gw: VPN_GATEWAY i_vrf: 0 f_vrf: 0 status: successful with SSL/TLS connection distance
21:36:47.617 7 March: WV: sslvpn rcvd context process queue event
21:36:47.621 7 March: WV: sslvpn rcvd context process queue event
21:36:47.745 7 March: WV: sslvpn rcvd context process queue event
21:36:47.749 7 March: WV: entering APPL with framework: 0 x 49233618,
Buffer (buffer: 0x4925DA18, data: 0x3F57ED98, len: 1,)
offset: 0, area: 0)
21:36:47.749 7 March: WV: fragmented data App - stamped
21:36:47.749 7 March: WV: entering APPL with framework: 0 x 49233618,
Buffer (buffer: 0x4925D818, data: 0x3F2033F8, len: 242,)
offset: 0, area: 0)
21:36:47.749 7 March: WV: Appl. Treatment failure: 2
21:36:47.749 7 March: WV: server-side not ready to send.
21:36:47.749 7 March: WV: server-side not ready to send.
21:36:47.749 7 March: WV: server-side not ready to send.
21:36:47.753 7 March: WV: sslvpn rcvd context process queue event
21:36:47.753 7 March: WV: server-side not ready to send.
--------------------------------------------------------------------------------------------
====================
Here is the config:
=====================
Crypto pki trustpoint VPN_TRUSTPOINT
enrollment selfsigned
Serial number
name of the object CN = Academy-certificate
crl revocation checking
rsakeypair RSA_KEY
!
!
VPN_TRUSTPOINT crypto pki certificate chain
!
local IP VPN_POOL 192.168.7.100 pool 192.168.7.150
!
WebVPN gateway VPN_GATEWAY
IP address
trustpoint SSL VPN_TRUSTPOINT
Enable logging
development
!
WebVPN install svc flash:/webvpn/anyconnect-win-3.1.02040-k9.pkg sequence 1
!
WebVPN context VPN_CONTEXT
title ".
" SSL authentication check all
!
connection message '
'. !
Group Policy VPNPOLICY
functions required svc
SVC-pool of addresses "VPN_POOL."
SVC Dungeon-client-installed
generate a new key SVC new-tunnel method
SVC split include 192.168.1.0 255.255.255.0
Group Policy - by default-VPNPOLICY
AAA authentication list default
Gateway VPN_GATEWAY
10 Max-users
development
--------------------
I did not understand, why customer mobility works at the launch of the web and why it does not work directly. Any input or advice would be much appreciated
Hi Giorgi,
This could be related to CSCti89976.
AnyConnect 3.0 does not work with existing IOS. Symptoms:
Customer independent AnyConnect 3.0 does not work with an existing headboard IOS.Conditions:
AnyConnect 3.0 with an IOS router as the network head.Workaround solution:
Use AnyConnect 2.5 or weblaunch.
Update IOSCould not upgrade the version of IOS?
HTH.
Portu.
-
Allow Cisco VPN Client through the firewall?
Hello
How can I allow a cisco VPN client work from the inside of our network to an external IP address?
We have customers who wish to make use of their Cisco VPN Client companies but our ASA blocks I think?
Also (sorry to ask) a friend in South America is having the same problem but I am not hink they use Cisco, is there a default port used by the client to Cisco? then I can send this info?
Thank you
Generally, the ASA will allow the IPSEC from the inside to outside traffic. This is when you want it came outside and connect to you - this is where it gets creative. You restrict outgoing traffic at all? You deny all ip/tcp/udp outgoing?
But may depend on if the remote end is compaitable NAT - T, and if they have configured. Another question would be how they allow VPN traffic go?
-
Problems with VPN using the Microsoft VPN Client
I'll put up a new ASA 5505 and I can't get to work remote VPN. My users use Microsoft VPN technology. I used the VPN Wizard, but I still can't get any connection to the device. It will not even get past the stage of connection. Joined the running configuration, any help would be appreciated.
Refer to the following address for more information on the vpn configuration:
http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a0080930f21.shtml
-
Configuration of the router to allow VPN traffic through
I would like to ask for assistance with a specific configuration to allow VPN traffic through a router from 1721.
The network configuration is the following:
Internet - Cisco 1721 - Cisco PIX 506th - LAN
Remote clients connect from the internet by using the Cisco VPN client. The 1721 should just pass the packets through to the PIX, which is 192.168.0.2. Inside of the interface of the router is 192.168.0.1.
The pix was originally configured with a public ip address and has been tested to work well to authenticate VPN connections and passing traffic in the local network. Then, the external ip address was changed to 192.168.0.2 and the router behind.
The 1721 is configured with an ADSL connection, with fall-over automatic for an asynchronous connection. This configuration does not work well, and in the local network, users have normal internet access. I added lists of access for udp, esp and the traffic of the ahp.
Cisco VPN clients receive an error indicating that the remote control is not responding.
I have attached the router for reference, and any help would be greatly apreciated.
Manual.
Brian
For VPN clients reach the PIX to complete their VPN the PIX needs to an address that is accessible from the outside where the customers are. When the PIX was a public address was obviously easy for guests to reach the PIX. When you give the PIX one address private, then he must make a translation. And this becomes a problem if the translation is dynamic.
You have provided a static translation that is what is needed. But you have restricted the TCP 3389. I don't know why you restricted it in this way. What is supposed to happen for ISAKMP and ESP, AHP traffic? How is it to be translated?
If there is not a static translation for ISAKMP traffic, ESP and AHP so clients don't know how to reach the server. Which brings me to the question of what the address is configured in the client to the server?
HTH
Rick
-
IOS router VPN Client (easy VPN) IPsec with Anyconnect
Hello
I would like to set up my router IOS IPsec VPN Client and connect with any connect.
Is it possible to configure an IPSec and SSL VPN Client on IOS router? I use for example a 1841.It would be perfect to give the user the choice of SSL or IPSec protocol. And the user needs that the Anyconnect Client.
I think it's possible with a Cisco ASA. But I can also do this with an IOS router?
Please let me know how if this is possible.
Also is it true that the IOS routers are not affected to hear bug bleed? SSL VPN and SSL VPN with Anyconnect page is also save?
http://Tools.Cisco.com/Security/Center/content/CiscoSecurityAdvisory/CIS...
But I am in any way interested in using IPSec and SSL VPN on a router IOS...
It's true - CCP does not yet offer the options to configure a VPN IPsec with IKEv2.
The configuration guide (here) offers detailed advice and includes examples of configuration.
-
Cannot ping vpn client of 1721 cli on the tunnel endpoint
I have a 1721 fortunately supporting ipsec vpn client connections. With one small exception, everything works perfectly fine.
The VPN pool is 10.10.10.1 - 10.10.10.254
The interface internal f0 is attributed to 192.168.1.254/24.
In my example:
Ip address of the VPN client is 10.10.10.5
The host address of an arbitrary machine on the internal lan is 192.168.1.151
I am able to ping 192.168.1.151 10.10.10.5
I'm * not * able to ping 10.10.10.5 192.168.1.254 using the cli on the 1721.
There is a very good reason to want to solve this problem. I would like to be able to access a tftp server on the client vpn directly from the router in order to download the new startup-config files. Is it possible to get the traffic of vpn-/ tunnel-point endpoint client tftp to travel through the tunnel?
When you ping from the CLI on the router, the packet will be from the external interface, not the IP address fa0 interface. The VPN client and the router only built a tunnel from the 10.10.10.5 address the 192.168.1.0 network, then the router not cryptera a package that her origin is outside the IP address.
Try to ping extended to 10.10.10.5 and source of 192.168.1.254 package and see if it works. If it does, you will have also to the source of your TFTP packets from inside interface, you can do with:
IP tftp source interface fa0
-
Problems with VPN on a PAT router
Hello
I have problems to make my VPN to work. I read through various examples of configuration, but don't always have it work properly.
Scenario: connection with the Cisco VPN Client to my router from outside.
Router works like NAT/PAT overload. Internet: Internal FA0/1 network: FA0/0
Problems: connection is working without problem, but I can't access anything in the network behind the router. Some hosts ping sometimes works, sometimes doesn't.
Does anyone have an idea of what could be the problem and what wrong with my setup?
Thanks in advance!
Here is my configuration:
Current configuration: 5817 bytes
!
! Last modification of the configuration at 14:41:13 CEST Saturday, July 3, 2010
!
version 12.3
horodateurs service debug uptime
Log service timestamps uptime
no password encryption service
!
router01 hostname
!
boot-start-marker
boot-end-marker
!
enable secret 5 - CENSORED-activate the password - CENSORED-
!
clock timezone THIS 1
clock to summer time it IS recurring
AAA new-model
!
!
local USERLIST of AAA authentication login.
local GROUP AAA authorization network
AAA - the id of the joint session
IP subnet zero
IP cef
!
!
!
Max-events of po verification IP 100
IPv6 unicast routing
!
!
!
!
!
!
!
!
!
!
!
!
username password 0 - CENSORED - TEST!
!
!
!
crypto ISAKMP policy 10
BA aes 256
preshared authentication
Group 2
the local address ADDRESSPOOL pool-crypto isakmp client configuration
ISAKMP xauth timeout 60 crypto
!
Configuration group customer isakmp crypto GROUP
-UNCENSORED - keypool ADDRESSPOOL
ACL 150
!
!
Crypto ipsec transform-set esp - aes 256 esp-sha-hmac SET
!
crypto dynamic-map 10 DYNMAP
Set transform-set
market arriere-route
!
!
list of authentication of card crypto client DYNMAP USERLIST
list of crypto isakmp DYNMAP card authorization GROUP
crypto card for the DYNMAP client configuration address respond
card crypto DYNMAP 10-isakmp dynamic ipsec DYNMAP
!
!
!
!
!
!
interface FastEthernet0/0
IP 172.16.0.250 255.255.252.0
IP nat inside
automatic speed
full-duplex
!
interface FastEthernet0/0.93
encapsulation dot1Q 93
IP 172.20.2.5 255.255.255.252
!
interface Serial0/0
no ip address
Shutdown
no fair queue
!
interface FastEthernet0/1
DHCP IP address
NAT outside IP
automatic duplex
automatic speed
No cdp enable
card crypto DYNMAP
!
interface Serial0/1
no ip address
Shutdown
No cdp enable
!
!
local IP ADDRESSPOOL 172.17.0.100 pool 172.17.0.150
IP nat inside source list 1 interface FastEthernet0/1 overload
IP nat inside source static tcp 172.16.1.51 80 interface FastEthernet0/1 81
IP nat inside source static tcp 172.16.2.4 2909 interface FastEthernet0/1 2909
IP nat inside source static tcp 172.16.2.1 3389 3389 FastEthernet0/1 interface
IP nat inside source static tcp 172.16.1.51 50000 interface FastEthernet0/1 50000
IP nat inside source static tcp 172.16.1.51 52000 interface FastEthernet0/1 52000
IP nat inside source static tcp 172.16.1.51 52001 interface FastEthernet0/1 52001
IP nat inside source static tcp 172.16.1.51 52002 interface FastEthernet0/1 52002
IP nat inside source static tcp 172.16.1.51 52003 interface FastEthernet0/1 52003
IP nat inside source static tcp 172.16.1.51 52004 interface FastEthernet0/1 52004
IP nat inside source static tcp 172.16.1.51 52005 interface FastEthernet0/1 52005
IP nat inside source static tcp 172.16.1.51 52006 interface FastEthernet0/1 52006
IP nat inside source static tcp 172.16.1.51 52007 interface FastEthernet0/1 52007
IP nat inside source static tcp 172.16.1.51 52008 interface FastEthernet0/1 52008
IP nat inside source static tcp 172.16.1.51 52009 interface FastEthernet0/1 52009
IP nat inside source static tcp 172.16.1.51 52010 interface FastEthernet0/1 52010
IP nat inside source static tcp 172.16.1.51 52011 interface FastEthernet0/1 52011
IP nat inside source static tcp 172.16.1.51 52012 interface FastEthernet0/1 52012
IP nat inside source static tcp 172.16.1.51 52013 interface FastEthernet0/1 52013
IP nat inside source static tcp 172.16.1.51 52014 interface FastEthernet0/1 52014
IP nat inside source static tcp 172.16.1.51 52015 interface FastEthernet0/1 52015
IP nat inside source static tcp 172.16.1.51 52016 interface FastEthernet0/1 52016
IP nat inside source static tcp 172.16.1.51 52017 interface FastEthernet0/1 52017
IP nat inside source static tcp 172.16.1.51 52018 interface FastEthernet0/1 52018
IP nat inside source static tcp 172.16.1.51 52019 interface FastEthernet0/1 52019
IP nat inside source static tcp 172.16.1.51 52020 interface FastEthernet0/1 52020
IP nat inside source static tcp 172.16.1.11 80 interface FastEthernet0/1 80
IP nat inside source static tcp 172.16.1.11 443 interface FastEthernet0/1 443
IP nat inside source static tcp 172.16.1.1 25 interface FastEthernet0/1 25
no ip address of the http server
no ip http secure server
IP classless
!
enable IP pim Bennett
!
access-list 1 permit 172.16.0.0 0.0.3.255
access-list 101 permit tcp any any eq 50000
access-list 101 permit tcp everything any 52000 52020 Beach
access-list 101 permit tcp any any eq www
access-list 101 permit tcp any any eq 443
access-list 101 permit tcp any any eq smtp
access-list 101 permit tcp any any eq 3389
access-list 101 permit tcp any any eq 2909
access-list 150 permit ip 172.16.0.0 0.0.3.255 172.17.0.0 0.0.0.255
access-list 151 allow ip 172.16.0.0 0.0.3.255 all
!
SHEEP allowed 10 route map
corresponds to the IP 151!
public RO SNMP-server community
!
!
!
!
!
Line con 0
exec-timeout 0 0
line to 0
line vty 0 4
password - CENSORED-!
NTP-period clock 17180405
source NTP FastEthernet0/1
NTP 162.23.41.34 Server
NTP 162.23.41.56 Server
NTP 162.23.41.55 Server
!
endJenny,
The NAT config is a little weird, you list 1.
List 1 is everything inside. (so all traffic inside subnet must be natted).
You must create an extended access list and create the entry
IP access-l ext 195
10 deny ip LOCAL_ADDRESS LOCAL_MASK VPN_POOL VPN_MASK
1000 ip LOCAL_ADDRESS LOCAL_MASK perm all
and apply that list to NAT overload.
This gives a try and let me know.
Edit: Ouch, 12.3 Mainline... Ollllllllllllld
-
Another problem with the configuration of Cisco VPN Client access VPN Site2site
We have a Cisco ASA 5505 at our CORP. branch I configured the VPN Site2Site to our COLO with a Juniper SRX220h, to another site works well, but when users access the home Cisco VPN client, they cannot ping or SSH through the Site2Site. JTACS contacted and they said it is not on their end, so I tried to contact Cisco TAC, no support. So here I am today, after for the 3 days (including Friday of last week) of searching the Internet for more than 6 hours per day and try different examples of other users. NO LUCK. The VPN client shows the route secure 10.1.0.0
Sorry to post this, but I'm frustrated and boss breathing down my neck to complete it.
CORP netowrk 192.168.1.0
IP VPN 192.168.12.0 pool
Colo 10.1.0.0 internal ip address
Also, here's an example of my config ASA
: Saved
:
ASA Version 8.2 (1)
!
hostname lwchsasa
names of
name 10.1.0.1 colo
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.1.1 255.255.255.0
!
interface Vlan2
backup interface Vlan12
nameif outside_pri
security-level 0
IP 64.20.30.170 255.255.255.248
!
interface Vlan12
nameif backup
security-level 0
IP 173.165.159.241 255.255.255.248
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
switchport access vlan 12
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
passive FTP mode
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
object-group network NY
object-network 192.168.100.0 255.255.255.0
BSRO-3387 tcp service object-group
port-object eq 3387
BSRO-3388 tcp service object-group
port-object eq 3388
BSRO-3389 tcp service object-group
EQ port 3389 object
object-group service tcp OpenAtrium
port-object eq 8100
object-group service Proxy tcp
port-object eq 982
VOIP10K - 20K udp service object-group
10000 20000 object-port Beach
the clientvpn object-group network
object-network 192.168.12.0 255.255.255.0
APEX-SSL tcp service object-group
Description of Apex Dashboard Service
port-object eq 8586
object-group network CHS-Colo
object-network 10.1.0.0 255.255.255.0
the DM_INLINE_NETWORK_1 object-group network
object-network 192.168.1.0 255.255.255.0
host of the object-Network 64.20.30.170
object-group service DM_INLINE_SERVICE_1
the purpose of the ip service
ICMP service object
service-object icmp traceroute
the purpose of the service tcp - udp eq www
the tcp eq ftp service object
the purpose of the tcp eq ftp service - data
the eq sqlnet tcp service object
EQ-ssh tcp service object
the purpose of the service udp eq www
the eq tftp udp service object
object-group service DM_INLINE_SERVICE_2
the purpose of the ip service
ICMP service object
EQ-ssh tcp service object
inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 clientvpn object-group
inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group NY
inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group CHS-Colo
inside_nat0_outbound list of allowed ip extended access any 192.168.12.0 255.255.255.0
outside_pri_1_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group NY
outside_pri_access_in list extended access permit tcp any interface outside_pri eq www
outside_pri_access_in list extended access permit tcp any outside_pri eq https interface
outside_pri_access_in list extended access permit tcp any interface outside_pri eq 8100
outside_pri_access_in list extended access permit tcp any outside_pri eq idle ssh interface
outside_pri_access_in list extended access permit icmp any any echo response
outside_pri_access_in list extended access permit icmp any any source-quench
outside_pri_access_in list extended access allow all unreachable icmp
outside_pri_access_in list extended access permit icmp any one time exceed
outside_pri_access_in list extended access permit tcp any 64.20.30.168 255.255.255.248 eq 8586
levelwingVPN_splitTunnelAcl list standard access allowed 192.168.1.0 255.255.255.0
levelwingVPN_splitTunnelAcl list standard access allowed 10.1.0.0 255.255.255.0
outside_pri_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group CHS-Colo
backup_nat0_outbound list extended access allowed object-group DM_INLINE_NETWORK_1 192.168.12.0 ip 255.255.255.0
outside_pri_cryptomap_1 list extended access allow DM_INLINE_SERVICE_2 of object-group 192.168.1.0 255.255.255.0 10.1.0.0 255.255.255.0
outside_19_cryptomap to access extended list ip 192.168.12.0 allow 255.255.255.0 10.1.0.0 255.255.255.0
inside_nat0_outbound_1 to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group CHS-Colo
VPN-Corp-Colo extended access list permits object-group DM_INLINE_SERVICE_1 192.168.12.0 255.255.255.0 10.1.0.0 255.255.255.0
Note to OUTSIDE-NAT0 NAT0 customer VPN remote site access-list
OUTSIDE-NAT0 192.168.12.0 ip extended access list allow 255.255.255.0 10.1.0.0 255.255.255.0
L2LVPN to access extended list ip 192.168.12.0 allow 255.255.255.0 10.1.0.0 255.255.255.0
pager lines 24
Enable logging
debug logging in buffered memory
exploitation forest asdm warnings
record of the rate-limit unlimited level 4
destination of exports flow inside 192.168.1.1 2055
timeout-rate flow-export model 1
Within 1500 MTU
outside_pri MTU 1500
backup of MTU 1500
local pool LVCHSVPN 192.168.12.100 - 192.168.12.254 255.255.255.0 IP mask
no failover
ICMP unreachable rate-limit 100 burst-size 5
ICMP allow any inside
ICMP allow any outside_pri
don't allow no asdm history
ARP timeout 14400
NAT-control
interface of global (outside_pri) 1
Global 1 interface (backup)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 0 inside_nat0_outbound_1 list of outdoor access
NAT (inside) 1 0.0.0.0 0.0.0.0
NAT (outside_pri) 0-list of access OUTSIDE-NAT0
backup_nat0_outbound (backup) NAT 0 access list
static TCP (inside outside_pri) interface https 192.168.1.45 https netmask 255.255.255.255 dns
static TCP (inside outside_pri) interface 192.168.1.45 www www netmask 255.255.255.255 dns
static TCP (inside outside_pri) interface 8586 192.168.1.45 8586 netmask 255.255.255.255 dns
static (inside, inside) tcp interface 8100 192.168.1.45 8100 netmask 255.255.255.255 dns
Access-group outside_pri_access_in in the outside_pri interface
Route 0.0.0.0 outside_pri 0.0.0.0 64.20.30.169 1 track 1
Backup route 0.0.0.0 0.0.0.0 173.165.159.246 254
Timeout xlate 03:00
Conn Timeout 0:00:00 half-closed 0:30:00 udp icmp from 01:00 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 01:00 uauth uauth absolute inactivity from 01:00
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
AAA authentication enable LOCAL console
AAA authentication http LOCAL console
the ssh LOCAL console AAA authentication
http server enable 981
http 192.168.1.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 outside_pri
http 0.0.0.0 0.0.0.0 backup
SNMP server group Authentication_Only v3 auth
SNMP-server host inside 192.168.1.47 survey community lwmedia version 2 c
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Sysopt connection tcpmss 1200
monitor SLA 123
type echo protocol ipIcmpEcho 216.59.44.220 interface outside_pri
Annex ALS life monitor 123 to always start-time now
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set esp-3des-sha1 esp-3des esp-sha-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto ipsec df - bit clear-df outside_pri
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto outside_pri_map 1 match address outside_pri_1_cryptomap
card crypto outside_pri_map 1 set pfs
peer set card crypto outside_pri_map 1 50.75.217.246
card crypto outside_pri_map 1 set of transformation-ESP-AES-256-MD5
card crypto outside_pri_map 2 match address outside_pri_cryptomap
peer set card crypto outside_pri_map 2 216.59.44.220
card crypto outside_pri_map 2 the value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
86400 seconds, duration of life card crypto outside_pri_map 2 set security-association
card crypto outside_pri_map 3 match address outside_pri_cryptomap_1
peer set card crypto outside_pri_map 3 216.59.44.220
outside_pri_map crypto map 3 the value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_pri_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
card crypto outside_pri_map interface outside_pri
crypto isakmp identity address
ISAKMP crypto enable outside_pri
crypto ISAKMP policy 5
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 10
preshared authentication
the Encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
aes-256 encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 50
preshared authentication
aes encryption
md5 hash
Group 2
life 86400
!
track 1 rtr 123 accessibility
Telnet timeout 5
SSH 192.168.1.0 255.255.255.0 inside
SSH timeout 5
Console timeout 0
management-access inside
dhcpd auto_config outside_pri
!
dhcpd address 192.168.1.51 - 192.168.1.245 inside
dhcpd dns 8.8.8.8 8.8.4.4 interface inside
rental contract interface 86400 dhcpd inside
dhcpd field LM inside interface
dhcpd allow inside
!
a basic threat threat detection
statistical threat detection port
Statistical threat detection Protocol
Statistics-list of access threat detection
a statistical threat detection host number rate 2
no statistical threat detection tcp-interception
WebVPN
port 980
allow inside
Select outside_pri
enable SVC
attributes of Group Policy DfltGrpPolicy
VPN-idle-timeout no
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
internal GroupPolicy2 group strategy
attributes of Group Policy GroupPolicy2
Protocol-tunnel-VPN IPSec svc
internal levelwingVPN group policy
attributes of the strategy of group levelwingVPN
Protocol-tunnel-VPN IPSec svc webvpn
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list levelwingVPN_splitTunnelAcl
username password encrypted Z74.JN3DGMNlP0H2 privilege 0 aard
aard attribute username
VPN-group-policy levelwingVPN
type of remote access service
rcossentino 4UpCXRA6T2ysRRdE encrypted password username
username rcossentino attributes
VPN-group-policy levelwingVPN
type of remote access service
bcherok evwBWqKKwrlABAUp encrypted password username
username bcherok attributes
VPN-group-policy levelwingVPN
type of remote access service
rscott nIOnWcZCACUWjgaP encrypted password privilege 0 username
rscott username attributes
VPN-group-policy levelwingVPN
sryan 47u/nJvfm6kprQDs password encrypted username
sryan username attributes
VPN-group-policy levelwingVPN
type of nas-prompt service
username, password cbruch a8R5NwL5Cz/LFzRm encrypted privilege 0
username cbruch attributes
VPN-group-policy levelwingVPN
type of remote access service
apellegrino yy2aM21dV/11h7fR password encrypted username
username apellegrino attributes
VPN-group-policy levelwingVPN
type of remote access service
username rtuttle encrypted password privilege 0 79ROD7fRw5C4.l5
username rtuttle attributes
VPN-group-policy levelwingVPN
username privilege 15 encrypted password vJFHerTwBy8dRiyW levelwingadmin
username password nbrothers Amjc/rm5PYhoysB5 encrypted privilege 0
username nbrothers attributes
VPN-group-policy levelwingVPN
clong z.yb0Oc09oP3/mXV encrypted password username
clong attributes username
VPN-group-policy levelwingVPN
type of remote access service
username, password finance 9TxE6jWN/Di4eZ8w encrypted privilege 0
username attributes finance
VPN-group-policy levelwingVPN
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
type of remote access service
IPSec-attributes tunnel-group DefaultL2LGroup
Disable ISAKMP keepalive
tunnel-group 50.75.217.246 type ipsec-l2l
IPSec-attributes tunnel-group 50.75.217.246
pre-shared-key *.
Disable ISAKMP keepalive
type tunnel-group levelwingVPN remote access
tunnel-group levelwingVPN General-attributes
address LVCHSVPN pool
Group Policy - by default-levelwingVPN
levelwingVPN group of tunnel ipsec-attributes
pre-shared-key *.
tunnel-group 216.59.44.221 type ipsec-l2l
IPSec-attributes tunnel-group 216.59.44.221
pre-shared-key *.
tunnel-group 216.59.44.220 type ipsec-l2l
IPSec-attributes tunnel-group 216.59.44.220
pre-shared-key *.
Disable ISAKMP keepalive
!
!
!
Policy-map global_policy
!
context of prompt hostname
Cryptochecksum:ed7f4451c98151b759d24a7d4387935b
: end
Hello
It seems to me that you've covered most of the things.
You however not "said" Configuring VPN L2L that traffic between the pool of VPN and network camp should be in tunnel
outside_pri_cryptomap to access extended list ip 192.168.12.0 allow 255.255.255.0 object-group CHS-Colo
Although naturally the remote end must also the corresponding configurations for users of VPN clients be able to pass traffic to the site of the camp.
-Jouni
-
Authentication failure - 5505 8.3 configuration to windows server RAIDUS vpn client
Hello
I'm trying to put up a 5505 (8.3 running) so that I can use vpn client through the RADIUS authentication
I set up a new local RAIDUS windows box and used the ASDM Assistant and a few other installation guides the 5505.
I get the following error:
INFO: Attempt to <10.0.0.92>IP address authentication test (timeout: 12 seconds)
ERROR: Authentication rejected: failure of the AAA
any help would be greatly appreciated
Here is my config sanitized:
lit5505-02 # sh run
: Saved
:
ASA Version 8.3 (1)
!
hostname lit5505-02
no names
!
interface Vlan1
nameif inside
security-level 100
10.0.0.100 IP address 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
banner motd ****************************************
Banner motd No. unauthorized access is allowed
banner motd ****************************************
passive FTP mode
DNS server-group DefaultDNS
domain name
network obj_any object
subnet 0.0.0.0 0.0.0.0
object network lotus_notes
host 10.0.0.3
network sonicwall_ssl_2000 object
Home 10.0.0.12
network of the NETWORK_OBJ_10.0.0.0_24 object
10.0.0.0 subnet 255.255.255.0
network of the ABD_LAN object
10.7.0.0 subnet 255.255.0.0
network of the LIT_LAN object
10.0.0.0 subnet 255.255.0.0
network of the LIT_LAN_vlan101 object
subnet 10.0.1.0 255.255.255.0
network of the LIT_LAN_vlan102 object
10.0.2.0 subnet 255.255.255.0
network of the LIT_LAN_vlan103 object
subnet 10.0.3.0 255.255.255.0
network of the LIT_LAN_vlan104 object
10.0.4.0 subnet 255.255.255.0
network of the LIT_LAN_vlan105 object
10.0.5.0 subnet 255.255.255.0
network of the LIT_LAN_vlan106 object
10.0.6.0 subnet 255.255.255.0
network of the LIT_LAN_vlan109 object
10.0.9.0 subnet 255.255.255.0
network of the LIT_LAN_vlan112 object
10.0.112.0 subnet 255.255.255.0
network of the LIT_LAN_vlan114 object
10.0.114.0 subnet 255.255.255.0
network of the LIT_LAN_vlan120 object
10.0.20.0 subnet 255.255.255.0
network of the LIT_LAN_vlan121 object
10.0.21.0 subnet 255.255.255.0
network of the LIT_LAN_vlan100 object
10.0.0.0 subnet 255.255.255.0
network of the LIT_LAN_vlan107 object
10.0.7.0 subnet 255.255.255.0
network of the LIT_LAN_vlan108 object
10.0.8.0 subnet 255.255.255.0
network of the BER_vlan1 object
subnet 10.8.0.0 255.255.255.0
the LIT_VLANS object-group network
network-object, object LIT_LAN_vlan100
network-object, object LIT_LAN_vlan101
network-object, object LIT_LAN_vlan102
network-object, object LIT_LAN_vlan103
network-object, object LIT_LAN_vlan104
network-object, object LIT_LAN_vlan105
network-object, object LIT_LAN_vlan106
network-object, object LIT_LAN_vlan107
network-object, object LIT_LAN_vlan108
network-object, object LIT_LAN_vlan109
network-object, object LIT_LAN_vlan112
network-object, object LIT_LAN_vlan114
network-object, object LIT_LAN_vlan120
network-object, object LIT_LAN_vlan121
the BER_VLANS object-group network
network-object, object BER_vlan1
access list off - in extended permit icmp any one
out-in access-list extended permit tcp any object sonicwall_ssl_2000 eq https
access-list out-in extended permit tcp any eq smtp lotus_notes object
access list-based ip allowed any one
outside_1_cryptomap list extended access permitted ip LIT_VLANS object ABD_LAN object-group
outside_2_cryptomap list extended access permitted ip object-group LIT_VLANS-group of objects BER_VLANS
pager lines 24
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
ICMP unreachable rate-limit 1 burst-size 110.0.0.92>
don't allow no asdm history
ARP timeout 14400
NAT static LIT_VLANS LIT_VLANS destination (indoor, outdoor) static source ABD_LAN ABD_LAN
NAT static LIT_VLANS LIT_VLANS destination (indoor, outdoor) static source BER_VLANS BER_VLANS
!
network obj_any object
NAT dynamic interface (indoor, outdoor)
object network lotus_notes
Static NAT (indoor, outdoor)
network sonicwall_ssl_2000 object
Static NAT (indoor, outdoor)
Access-group all-out in the interface inside
out-in access-group in external interface
Route outside 0.0.0.0 0.0.0.0
Route inside 10.0.1.0 255.255.255.0 10.0.0.254 1
Route inside 10.0.2.0 255.255.255.0 10.0.0.254 1
Route inside between 10.0.3.0 255.255.255.0 10.0.0.254 1
Route inside 10.0.4.0 255.255.255.0 10.0.0.254 1
Route inside 10.0.5.0 255.255.255.0 10.0.0.254 1
Route inside 10.0.6.0 255.255.255.0 10.0.0.254 1
Route inside 10.0.7.0 255.255.255.0 10.0.0.254 1
Route inside 10.0.8.0 255.255.255.0 10.0.0.254 1
Route inside 10.0.9.0 255.255.255.0 10.0.0.254 1
Route inside 10.0.20.0 255.255.255.0 10.0.0.254 1
Route inside 10.0.21.0 255.255.255.0 10.0.0.254 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
RADIUS protocol AAA-server litvms03
litvms03 AAA-server (inside) host 10.0.0.92
key *.
RADIUS-common-pw *.
the ssh LOCAL console AAA authentication
Enable http server
http 10.0.0.0 255.255.0.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
card crypto outside_map 1 match address outside_1_cryptomap
card crypto outside_map 1 set pfs Group1
map 1 set outside_map crypto peer
card crypto outside_map 1 set of transformation-ESP-3DES-SHA
card crypto outside_map 2 match address outside_2_cryptomap
card crypto outside_map 2 pfs Group1 set
card crypto outside_map 2 defined peer
card crypto outside_map 2 game of transformation-ESP-3DES-SHA
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
No encryption isakmp nat-traversal
Telnet timeout 5
SSH 10.0.0.0 255.255.0.0 inside
SSH 10.7.0.0 255.255.0.0 inside
SSH timeout 5
SSH version 2
Console timeout 0
management-access inside
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
NTP server 216.14.98.234 prefer external source
NTP server 204.15.208.61 prefer external source
WebVPN
internal jdr_littleport_employee_vpn group policy
attributes of the strategy of group jdr_littleport_employee_vpn
banner value
value of 10.0.0.8 WINS server 10.100.1.141
value of 10.0.0.8 DNS server 10.100.1.141
Split-tunnel-policy tunnelall
jdrcables.com value by default-field
Split-dns value jdrcables.com
IPv6 address pools no
type of tunnel-group ipsec-l2l
Tunnel ipsec-attributes group
pre-shared key *.
type of tunnel-group ipsec-l2l
Tunnel ipsec-attributes group
pre-shared key *.
!
!
context of prompt hostname
Cryptochecksum:6d1868630c83f17fe0c7de41006a1526
: end
Rich
I have checked the road conditions but missed the VIRTUAL LAN address. Sorry about that.
I'm glad to see that you solved the problem and am not surprised that the question seems to have been some incompatible in the serttings server. I think you should be able to close the thread based on your response. Give it a try.
HTH
Rick
-
With UDP encapsulation, it is possible to have multiple VPN clients behind a router that tap one public IP address. IE: A site DSL with Linksys router, can I have multiple clients on the LAN side to connect simultaneously to the VPN Concentor. I know that's not possible without UDP encapsulation and I think that it is not possible with UDP encapsulation, but confirmation sought a way or another.
Thank you
Hello
your understanding is good, it is not possible in two ways in this scenario.
Why, because when you use UDP/IPSec, IKE traffic is always sent using UDP500, and PAT instrument cannot use the same port for more than one machine, thas why you would see 2 customer disconnect the first person, when you try / launch 2nd session behind the same device.
solution is ipsec/tcp, vpn3000 v3.5 + (client concentrator) support.
Mon.02
THX
AFAQ
-
Number of VPN clients behind a PIX 501, restriction?
Is there a restriction in the number of VPN clients can be behind a PIX 501. Is is just limited by the number of hosts (10, 50, Unlimited)?
Hello
Behind a PIX VPN clients. Will you use NAT - T (must). It will be limited only to the number of users (normal users) through the PIX. So if you have a license to use 10 or 50 then the VPN connection is counted in this list.
Connection VPN Client through PIX is not IKE tunnel. They are normal UDP500 and UDP4500 peers.
Vikas
-
VPN clients cannot access remote sites - PIX, routing problem?
I have a problem with routing to remote from our company websites when users connect via their VPN client remotely (i.e. for home workers)
Our headquarters contains a PIX 515E firewall. A number of remote sites to connect (via ADSL) to head office using IPSEC tunnels, ending the PIX.
Behind the PIX is a router 7206 with connections to the seat of LANs and connections to a number of ISDN connected remote sites. The default route on 7206 points to the PIX from traffic firewall which sits to ADSL connected remote sites through the PIX. Internal traffic for LAN and ISDN connected sites is done via the 7206.
Very good and works very well.
When a user connects remotely using their VPN client (connection is interrupted on the PIX) so that they get an IP address from the pool configured on the PIX and they can access resources located on local networks to the office with no problems.
However, the problem arises when a remote user wants access to a server located in one of the remote sites ADSL connected - it is impossible to access all these sites.
On the remote site routers, I configured the access lists to allow access from the pool of IP addresses used by the PIX. But it made no difference. I think that the problem may be the routes configured on the PIX itself, but I don't know what is necessary to solve this problem.
Does anyone have suggestions on what needs to be done to allow access to remote sites for users connected remotely via VPN?
(Note: I suggested a workaround, users can use a server on LAN headquarters as a "jump point" to connect to remote servers from there)
with pix v6, no traffic is allowed to redirect to the same interface.
for example, a remote user initiates an rdp session for one of the barns adsl. PIX decrypts the packet coming from the external interface and looks at the destination. because the destination is one of adsl sites, pix will have to return traffic to the external interface. Unfortunately, pix v6.x has a limitation that would force the pix to drop the packet.
with the v7, this restriction has been removed with the "same-security-traffic control intra-interface permits".
-
Routing issue of Cisco VPN Client ASA
Hi, I use a Barracuda NG for firewalls and I would use a Cisco ASA 5505 for VPN Client connections. But I have the problem that I can't get a connection to the VPN PC connected to the internal network. But I can reach the VPN connected PC from the inside. Here is a diagram of my network:
Here the IP Configuration and the routing of the Barracuda firewall table:
I have a route on the Barracuda NG to the 10.10.10.0/24 network VPN Client on eth0.
The 192.168.1.0/24 LAN I ping the Client comes with Client VPN 10.10.10.11 as it should. But I can't ping or access network resources in the local network for AnyConnected customer's PC that connected through the VPN.
Here is the config Cisco ASA:
: Saved : : Hardware: ASA5505, 512 MB RAM, CPU Geode 500 MHz : ASA Version 9.2(2) ! hostname leela names ip local pool VPN-Pool 10.10.10.10-10.10.10.200 mask 255.255.255.0 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 switchport access vlan 5 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.250 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address dhcp ! interface Vlan5 nameif dmz security-level 50 ip address 172.16.0.250 255.255.255.0 ! ftp mode passive clock timezone CEST 1 clock summer-time CEDT recurring last Sun Mar 2:00 last Sun Oct 3:00 dns domain-lookup inside dns server-group DefaultDNS name-server 192.168.1.10 same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network obj_any subnet 0.0.0.0 0.0.0.0 object network VPN-Pool subnet 10.10.10.0 255.255.255.0 description VPN-Pool object network NETWORK_OBJ_10.10.10.0_24 subnet 10.10.10.0 255.255.255.0 access-list inside_access_in extended permit ip any any access-list inside_access_in extended permit ip object VPN-Pool any access-list dmz_access_in extended permit ip any any access-list global_access extended permit ip any any access-list outside_access_in extended permit ip any any pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 mtu dmz 1500 no failover icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 no arp permit-nonconnected nat (inside,dmz) source static any any destination static NETWORK_OBJ_10.10.10.0_24 NETWORK_OBJ_10.10.10.0_24 no-proxy-arp route-lookup inactive access-group inside_access_in in interface inside access-group outside_access_in in interface outside access-group dmz_access_in in interface dmz access-group global_access global route dmz 0.0.0.0 0.0.0.0 172.16.0.254 1 route inside 0.0.0.0 0.0.0.0 192.168.1.254 tunneled timeout xlate 3:00:00 timeout pat-xlate 0:00:30 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy server-type microsoft user-identity default-domain LOCAL aaa authentication enable console LDAP_SRV_GRP LOCAL aaa authentication http console LDAP_SRV_GRP LOCAL aaa authentication ssh console LDAP_SRV_GRP LOCAL aaa authentication serial console LOCAL http server enable 444 http 192.168.1.0 255.255.255.0 inside snmp-server location Vienna crypto ipsec ikev2 ipsec-proposal DES protocol esp encryption des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal 3DES protocol esp encryption 3des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES protocol esp encryption aes protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES192 protocol esp encryption aes-192 protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES256 protocol esp encryption aes-256 protocol esp integrity sha-1 md5 crypto ipsec security-association pmtu-aging infinite crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES crypto map inside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map inside_map interface inside crypto map dmz_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map dmz_map interface dmz crypto ca trustpoint ASDM_TrustPoint0 enrollment self subject-name CN=leela proxy-ldc-issuer crl configure crypto ca trustpoint ASDM_TrustPoint1 enrollment terminal crl configure crypto ca trustpool policy crypto ca certificate chain ASDM_TrustPoint0 quit crypto ikev2 policy 1 encryption aes-256 integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 10 encryption aes-192 integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 20 encryption aes integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 30 encryption 3des integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 40 encryption des integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 enable dmz client-services port 443 crypto ikev2 remote-access trustpoint ASDM_TrustPoint0 telnet timeout 5 no ssh stricthostkeycheck ssh 192.168.1.0 255.255.255.0 inside ssh timeout 30 ssh key-exchange group dh-group1-sha1 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.254-192.168.1.254 inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept dynamic-filter updater-client enable dynamic-filter use-database ntp server 192.168.1.10 source inside ssl trust-point ASDM_TrustPoint0 dmz ssl trust-point ASDM_TrustPoint0 inside webvpn enable dmz no anyconnect-essentials anyconnect image disk0:/anyconnect-macosx-i386-3.1.05170-k9.pkg 1 anyconnect image disk0:/anyconnect-win-3.1.05170-k9.pkg 2 anyconnect image disk0:/anyconnect-linux-3.1.05170-k9.pkg 3 anyconnect image disk0:/anyconnect-linux-64-3.1.05170-k9.pkg 4 anyconnect profiles AnyConnect_client_profile disk0:/AnyConnect_client_profile.xml anyconnect enable tunnel-group-list enable group-policy DfltGrpPolicy attributes default-domain value group-policy GroupPolicy_AnyConnect internal group-policy GroupPolicy_AnyConnect attributes wins-server none dns-server value 192.168.1.10 vpn-tunnel-protocol ikev2 ssl-client webvpn anyconnect profiles value AnyConnect_client_profile type user group-policy portal internal group-policy portal attributes vpn-tunnel-protocol ssl-clientless webvpn url-list none username tunnel-group AnyConnect type remote-access tunnel-group AnyConnect general-attributes address-pool VPN-Pool authentication-server-group LDAP_SRV_GRP default-group-policy GroupPolicy_AnyConnect tunnel-group AnyConnect webvpn-attributes group-alias AnyConnect enable tunnel-group Portal type remote-access tunnel-group Portal general-attributes authentication-server-group LDAP_SRV_GRP default-group-policy portal tunnel-group Portal webvpn-attributes group-alias portal enable! ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 ! prompt hostname context no call-home reporting anonymous hpm topN enable : end no asdm history enable
Can someone please help me solve this problem?
When I tried to solve this I didn't choose which interface the Packet Tracer?
The interface inside or DMZ interface? Inside, he says it will not work with the dmz but the error did not help me
Anyone here knows why it does not work?
Hello
Inside LAN is directly connected to the right firewall VPN... then I don't think you have to have the itinerary tunnele... can you try to remove the road tunnel mode and check.
entrance to the road that is static to achieve 10.10.10.11 as its display is correct...
Route by tunnel watch also with 255 administrative distance. I've never used that in my scenarios... lets see...
Concerning
Knockaert
Maybe you are looking for
-
email from Apple asking to restore my ID...
Is - this legitimate or someone just phishing?
-
How can I delete individual credit cards to iCloud keychain?
I have a whole bunch of credit cards that arise on iCloud keychain and a good number of them have been cancelled. How can I remove some individual credit cards while keeping the keychain available?
-
What is a BACK BONE.
-
When running my application, the active control in the UI has a black outline that I find unattractive. Is there a way to make disappear? Thank you.
-
My CPU fans startsup on turning the tension but pts just after that.
Original title: fan control My fan starts to power up, but stops just after. and my lab top is hot