Failure of VPN Client

With UDP encapsulation, it is possible to have multiple VPN clients behind a router that tap one public IP address. IE: A site DSL with Linksys router, can I have multiple clients on the LAN side to connect simultaneously to the VPN Concentor. I know that's not possible without UDP encapsulation and I think that it is not possible with UDP encapsulation, but confirmation sought a way or another.

Thank you

Hello

your understanding is good, it is not possible in two ways in this scenario.

Why, because when you use UDP/IPSec, IKE traffic is always sent using UDP500, and PAT instrument cannot use the same port for more than one machine, thas why you would see 2 customer disconnect the first person, when you try / launch 2nd session behind the same device.

solution is ipsec/tcp, vpn3000 v3.5 + (client concentrator) support.

Mon.02

THX

AFAQ

Tags: Cisco Security

Similar Questions

Authentication failure - 5505 8.3 configuration to windows server RAIDUS vpn client

Hello

I'm trying to put up a 5505 (8.3 running) so that I can use vpn client through the RADIUS authentication

I set up a new local RAIDUS windows box and used the ASDM Assistant and a few other installation guides the 5505.

I get the following error:

INFO: Attempt to <10.0.0.92>IP address authentication test (timeout: 12 seconds)

ERROR: Authentication rejected: failure of the AAA

any help would be greatly appreciated

Here is my config sanitized:

lit5505-02 # sh run

: Saved

:

ASA Version 8.3 (1)

!

hostname lit5505-02

no names

!

interface Vlan1

nameif inside

security-level 100

10.0.0.100 IP address 255.255.255.0

!

interface Vlan2

nameif outside

security-level 0

IP address

!

interface Ethernet0/0

switchport access vlan 2

!

interface Ethernet0/1

!

interface Ethernet0/2

!

interface Ethernet0/3

!

interface Ethernet0/4

!

interface Ethernet0/5

!

interface Ethernet0/6

!

interface Ethernet0/7

!

banner motd ****************************************

Banner motd No. unauthorized access is allowed

banner motd ****************************************

passive FTP mode

DNS server-group DefaultDNS

domain name

network obj_any object

subnet 0.0.0.0 0.0.0.0

object network lotus_notes

host 10.0.0.3

network sonicwall_ssl_2000 object

Home 10.0.0.12

network of the NETWORK_OBJ_10.0.0.0_24 object

10.0.0.0 subnet 255.255.255.0

network of the ABD_LAN object

10.7.0.0 subnet 255.255.0.0

network of the LIT_LAN object

10.0.0.0 subnet 255.255.0.0

network of the LIT_LAN_vlan101 object

subnet 10.0.1.0 255.255.255.0

network of the LIT_LAN_vlan102 object

10.0.2.0 subnet 255.255.255.0

network of the LIT_LAN_vlan103 object

subnet 10.0.3.0 255.255.255.0

network of the LIT_LAN_vlan104 object

10.0.4.0 subnet 255.255.255.0

network of the LIT_LAN_vlan105 object

10.0.5.0 subnet 255.255.255.0

network of the LIT_LAN_vlan106 object

10.0.6.0 subnet 255.255.255.0

network of the LIT_LAN_vlan109 object

10.0.9.0 subnet 255.255.255.0

network of the LIT_LAN_vlan112 object

10.0.112.0 subnet 255.255.255.0

network of the LIT_LAN_vlan114 object

10.0.114.0 subnet 255.255.255.0

network of the LIT_LAN_vlan120 object

10.0.20.0 subnet 255.255.255.0

network of the LIT_LAN_vlan121 object

10.0.21.0 subnet 255.255.255.0

network of the LIT_LAN_vlan100 object

10.0.0.0 subnet 255.255.255.0

network of the LIT_LAN_vlan107 object

10.0.7.0 subnet 255.255.255.0

network of the LIT_LAN_vlan108 object

10.0.8.0 subnet 255.255.255.0

network of the BER_vlan1 object

subnet 10.8.0.0 255.255.255.0

the LIT_VLANS object-group network

network-object, object LIT_LAN_vlan100

network-object, object LIT_LAN_vlan101

network-object, object LIT_LAN_vlan102

network-object, object LIT_LAN_vlan103

network-object, object LIT_LAN_vlan104

network-object, object LIT_LAN_vlan105

network-object, object LIT_LAN_vlan106

network-object, object LIT_LAN_vlan107

network-object, object LIT_LAN_vlan108

network-object, object LIT_LAN_vlan109

network-object, object LIT_LAN_vlan112

network-object, object LIT_LAN_vlan114

network-object, object LIT_LAN_vlan120

network-object, object LIT_LAN_vlan121

the BER_VLANS object-group network

network-object, object BER_vlan1

access list off - in extended permit icmp any one

out-in access-list extended permit tcp any object sonicwall_ssl_2000 eq https

access-list out-in extended permit tcp any eq smtp lotus_notes object

access list-based ip allowed any one

outside_1_cryptomap list extended access permitted ip LIT_VLANS object ABD_LAN object-group

outside_2_cryptomap list extended access permitted ip object-group LIT_VLANS-group of objects BER_VLANS

pager lines 24

asdm of logging of information

Within 1500 MTU

Outside 1500 MTU

ICMP unreachable rate-limit 1 burst-size 1

don't allow no asdm history

ARP timeout 14400

NAT static LIT_VLANS LIT_VLANS destination (indoor, outdoor) static source ABD_LAN ABD_LAN

NAT static LIT_VLANS LIT_VLANS destination (indoor, outdoor) static source BER_VLANS BER_VLANS

!

network obj_any object

NAT dynamic interface (indoor, outdoor)

object network lotus_notes

Static NAT (indoor, outdoor)

network sonicwall_ssl_2000 object

Static NAT (indoor, outdoor)

Access-group all-out in the interface inside

out-in access-group in external interface

Route outside 0.0.0.0 0.0.0.0

Route inside 10.0.1.0 255.255.255.0 10.0.0.254 1

Route inside 10.0.2.0 255.255.255.0 10.0.0.254 1

Route inside between 10.0.3.0 255.255.255.0 10.0.0.254 1

Route inside 10.0.4.0 255.255.255.0 10.0.0.254 1

Route inside 10.0.5.0 255.255.255.0 10.0.0.254 1

Route inside 10.0.6.0 255.255.255.0 10.0.0.254 1

Route inside 10.0.7.0 255.255.255.0 10.0.0.254 1

Route inside 10.0.8.0 255.255.255.0 10.0.0.254 1

Route inside 10.0.9.0 255.255.255.0 10.0.0.254 1

Route inside 10.0.20.0 255.255.255.0 10.0.0.254 1

Route inside 10.0.21.0 255.255.255.0 10.0.0.254 1

Timeout xlate 03:00

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

timeout tcp-proxy-reassembly 0:01:00

dynamic-access-policy-registration DfltAccessPolicy

RADIUS protocol AAA-server litvms03

litvms03 AAA-server (inside) host 10.0.0.92

key *.

RADIUS-common-pw *.

the ssh LOCAL console AAA authentication

Enable http server

http 10.0.0.0 255.255.0.0 inside

No snmp server location

No snmp Server contact

Server enable SNMP traps snmp authentication linkup, linkdown cold start

Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

life crypto ipsec security association seconds 28800

Crypto ipsec kilobytes of life - safety 4608000 association

card crypto outside_map 1 match address outside_1_cryptomap

card crypto outside_map 1 set pfs Group1

map 1 set outside_map crypto peer

card crypto outside_map 1 set of transformation-ESP-3DES-SHA

card crypto outside_map 2 match address outside_2_cryptomap

card crypto outside_map 2 pfs Group1 set

card crypto outside_map 2 defined peer

card crypto outside_map 2 game of transformation-ESP-3DES-SHA

outside_map interface card crypto outside

crypto ISAKMP allow outside

crypto ISAKMP policy 10

preshared authentication

3des encryption

sha hash

Group 2

life 86400

No encryption isakmp nat-traversal

Telnet timeout 5

SSH 10.0.0.0 255.255.0.0 inside

SSH 10.7.0.0 255.255.0.0 inside

SSH timeout 5

SSH version 2

Console timeout 0

management-access inside

a basic threat threat detection

Statistics-list of access threat detection

no statistical threat detection tcp-interception

NTP server 216.14.98.234 prefer external source

NTP server 204.15.208.61 prefer external source

WebVPN

internal jdr_littleport_employee_vpn group policy

attributes of the strategy of group jdr_littleport_employee_vpn

banner value

value of 10.0.0.8 WINS server 10.100.1.141

value of 10.0.0.8 DNS server 10.100.1.141

Split-tunnel-policy tunnelall

jdrcables.com value by default-field

Split-dns value jdrcables.com

IPv6 address pools no

type of tunnel-group ipsec-l2l

Tunnel ipsec-attributes group

pre-shared key *.

type of tunnel-group ipsec-l2l

Tunnel ipsec-attributes group

pre-shared key *.

!

!

context of prompt hostname

Cryptochecksum:6d1868630c83f17fe0c7de41006a1526

: end

Rich

I have checked the road conditions but missed the VIRTUAL LAN address. Sorry about that.

I'm glad to see that you solved the problem and am not surprised that the question seems to have been some incompatible in the serttings server. I think you should be able to close the thread based on your response. Give it a try.

HTH

Rick

Reason of 440. Driver failure. Cisco VPN client

Hello

I have an Asus enrich your life Smart tablet with 8 32-bit windows. I installed the client vpn cisco 5.0.07.0290 without any problem. After you configure the settings and when clicking on connect, the following error message is displayed.

Secure the complete VPN connection locally by the client.

Reason of 440. Pilot failure

I searched and found a few solutions such as changing the description of the registry. service of the dne installation, uninstall the vpn client and the re - install etc but nothing worked.

All the drivers are up to date according to the Asus LiveUpdate program. Don't know what to do.

Help, please.

Hi Dony,

Thanks for posting your question on Microsoft Community!

I suggest you post your question on Windows 8 section Pro of Forums TechNet to better help.

Windows 8 IT Pro.

http://social.technet.Microsoft.com/forums/en-us/category/w8itpro

I hope this helps!

Receive message "Validation of C:\WINDOWS\System32\VSINIT.dll failure" error message when trying to run Cisco VPN Client.

windows\system32\vsinit.dll

I try to run CISCO "VPN Client" connect from my PC at home for my work PC.

Then, I get a message:

Validation failed for C:\WINDOWS\System32\VSINIT.dll

Any ideas?

Martin

Hello

Run the checker system files on the computer. Link, we can see: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe): http://support.microsoft.com/kb/310747

Note that: if he asks you the service pack CD, follow these steps from the link: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker: http://support.microsoft.com/kb/900910 (valid for Service pack 3)

If the steps above is not enough of it please post your request in the TechNet forum for assistance: http://social.technet.microsoft.com/Forums/en/category/windowsxpitpro

% 305013-5-ASA: rules asymmetrical NAT matched for flows forward and backward; Connection refused because of the failure of the path opposite. NAT VPN clients problems after that put 8.3.2 to level.

I've recently updated to 8.3.2 and I have been informed of these NAT changes, but even after reading the https://supportforums.cisco.com/docs/DOC-12569 I am still unable to rectify the communication network 192.168.100.0 VPN with hosts on 172.16.1.0 and 172.16.9.0. VPN clients connect to the external interface, and I try to ping inside and the demilitarized zone, respectable 172.16.1.0 and 172.16.9.0 hosts. VPN client shows that the two previously mentioned networks such as roads of security, but still not to the ping pong.

# sh nat

Manual NAT policies (Section 1)

1 (inside) to the (whole) source static obj - 172.16.9.0 obj - 172.16.9.0 destination static obj - obj - unidirectional 192.168.100.0 192.168.100.0

translate_hits = 0, untranslate_hits = 0

2 (inside) to the (whole) source static obj - 172.16.1.0 obj - 172.16.1.0 destination static obj - obj - unidirectional 192.168.100.0 192.168.100.0

translate_hits = 0, untranslate_hits = 0

3 (inside) to the (whole) source static obj - 172.16.1.0 obj - 172.16.1.0 destination static obj - 172.16.12.0 obj - one-way 172.16.12.0

translate_hits = 0, untranslate_hits = 0

4 (dmz) to (outside) source static obj - 172.16.9.0 obj - 172.16.9.0 destination static obj - obj - unidirectional 192.168.100.0 192.168.100.0

translate_hits = 0, untranslate_hits = 0

5 (dmz) to (outside) source static obj - 172.16.9.0 obj - 172.16.9.0 destination static obj - 172.16.12.0 obj - one-way 172.16.12.0

translate_hits = 0, untranslate_hits = 0

Auto NAT policies (Section 2)

1 (dmz), to the source (external) static obj - 172.16.9.5 interface tcp www www service

translate_hits = 0, untranslate_hits = 142

2 (dmz) (outdoor) source static obj - 172.16.9.5 - 01 interface service tcp 3389 3389

translate_hits = 0, untranslate_hits = 2

3 (dmz) (outdoor) source static obj - 172.16.9.5 - 02 interface tcp ldap ldap service

translate_hits = 0, untranslate_hits = 0

4 (dmz) (outdoor) source static obj interface - 172.16.9.5 - 03 service ftp ftp tcp

translate_hits = 0, untranslate_hits = 0

5 (dmz) to (outside) of the source static obj - 172.16.9.5 - 04 interface tcp smtp smtp service

translate_hits = 0, untranslate_hits = 267

6 (inside) source static obj - 172.16.9.0 172.16.9.0 (dmz)

translate_hits = 4070, untranslate_hits = 224

7 (inside) to (dmz) source static obj - 10.1.0.0 10.1.0.0

translate_hits = 0, untranslate_hits = 0

8 (inside) to (dmz) source static obj - 172.16.0.0 172.16.0.0

translate_hits = 152, untranslate_hits = 4082

9 (dmz) to dynamic interface of the obj - 172.16.9.0 - 01 source (outdoor)

translate_hits = 69, untranslate_hits = 0

10 (inside) to the obj_any interface dynamic source (external)

translate_hits = 196, untranslate_hits = 32

I think you must following two NAT config

NAT (inside, outside) source static obj - 172.16.1.0 obj - 172.16.1.0 destination static obj - 192.168.100.0 obj - 192.168.100.0
NAT (dmz, external) source static obj - 172.16.9.0 obj - 172.16.9.0 destination static obj - 192.168.100.0 obj - 192.168.100.0

Please configure them and remove any additional NAT configuration and then try again.

AnyConnect VPN client authentication using certificates

Guys, I'm trying to configure my ASA5505 to authenticate the AnyConnect VPN clients using certificates. I have 'Certificates' defined as my method of authentication in my AnyConnect connection profile (see screenshot), but I get 'Certificate Validation failure' whenever I try to connect. The certificate I want to use is a computer issued by my CA certificate company root (Windows Server 2008 running Active Directory Certificate Services). Screenshot of certificate is attached. I added the root certificate on the SAA, and I tried all kinds of combinations by using the corresponding certificate in the AnyConnect Client profile. Each attempt failed, and I'm having no luck finding documentation on how to proceed. Any help would be greatly appreciated!

Hello Shaun,

The problem you're describing, not be able to authenticate through certificate through Microsoft Internet Explorer, is the fact that the certificate is in the computer store. You do not want to confirm with Microsoft, but, I understand that only Microsoft Internet users explore the user store, this certificate is not available to attend the ASA via the Internet browser.

-Craig

ASA vpn client

Hello world

I would like to ask for help in order to correct a customer vpn tunnel. I'm not familiar with the AAS, so please do not laugh if I write something stupid

So I inherit one asa, which has two interface used physical and vlan more. Outdoors, office, management and management. I use my computer on the vlan management, and I can reach the computers on the desktop (192.168.12.0/24) and the branch (192.168.10.0/24). I would realize that I connect to thrught houses a vpn, and I should reach the 12.x and 10.x network as I was in these networks (due to the microsoft allowed wirewall to the local network traffic).

I inherited a vpn configuration which I added my user.

I'm trying to cite only the relevant portion of config:

SSH 192.168.99.0 255.255.255.0 management

access extensive list ip 192.168.99.0 nonat_management allow 255.255.255.0 192.168.99.0 255.255.255.0

access extensive list ip 192.168.99.0 nat_management_branch allow 255.255.255.0 192.168.10.0 255.255.255.0
access extensive list ip 192.168.99.0 nat_management_office allow 255.255.255.0 192.168.12.0 255.255.255.0

IP local pool ippool 192.168.99.100 - 192.168.99.200

NAT-control
Global 1 interface (outside)

NAT (management) - access list 0 nonat_management
nat_management_office list of access 5 NAT (management)
nat_management_branch list of Access 10 NAT (management)

192.168.99.50 management - dhcpd addresses 192.168.99.79
enable dhcpd management

L2TP strategy of Group internal
monty password username * == encrypted nt
monty username attributes
Protocol-tunnel-VPN l2tp ipsec
VPN-framed-ip-address 192.168.99.99 255.255.255.0
attributes global-tunnel-group DefaultRAGroup
ippool address pool
Group Policy - by default-l2tp
IPSec-attributes tunnel-group DefaultRAGroup
pre-shared key *.
tunnel-group DefaultRAGroup ppp-attributes
ms-chap-v2 authentication

I quote the encryption settings, because I can connect to asa, I think that I have problems with the nat or access rules.

I have an ip local pool 192.168.99.100 - 192.168.99.200, but I have the fixed ip with the vpn-framed-ip-address 192.168.99.99 255.255.255.0

Happened when I connect and try to reach the following computers:

I can reach only a freenas 192.168.12.2, and I see in his journal that I have connected with 192.168.99.99 (vpn-framed-ip-address)

I can't reach the computers on networks, however I have two nat rules, working when I'm in the office network 99.0

access extensive list ip 192.168.99.0 nat_management_branch allow 255.255.255.0 192.168.10.0 255.255.255.0
access extensive list ip 192.168.99.0 nat_management_office allow 255.255.255.0 192.168.12.0 255.255.255.0

It seems that these two nat rules do not work with my vpn client.

And it is very important to arrive at the asa with ssh through the tunnel, but I can't.

I don't know if that is the ip address of the vpn client is in the management network, perhaps one should change to another network:

for example 192.168.95.0/24

A vpn asa for Dummies or any help is appreciated.

Thank you very much

Hi Chris,

The following should help:

access-list allowed 192.168.12.0 nonat_office 255.255.255.0 192.168.90.0 255.255.255.0

In this way, returning office subnet pool VPN traffic is exempt from nat. And so you will not get the failure of RPF checking.

In addition, you must change this:

nat_vpn_office to access extended list ip 10.10.10.0 allow 255.255.255.0 192.168.12.0 255.255.255.0

(incoming traffic on the VPN remote access would come from the VPN pool.) Not your home network.)

You must have:

No nat_vpn_office access list extended ip 10.10.10.0 allow 255.255.255.0 192.168.12.0 255.255.255.0

access extensive list ip 192.168.90.0 nat_vpn_office allow 255.255.255.0 192.168.12.0 255.255.255.0

NAT (outside) 5 nat_vpn_office list of outdoor access

Hope this helps, and sorry for the delay.

-Shrikant

P.S.: Please check the question as answered if it was resolved. Do rates all useful messages. Thank you.

Layman to ASA 5505 vpn of the native vpn client internet, tcp 1723

Hi all

I am setting up this asa for connect users at home to my network using vpn clients from microsoft to the native address with windows xp on the internet.

This asa have, on the outside interface an ip public Internet and inside Board have set up in the network of 192.168.0.x and I want to access this network of internet users using native vpn clients.

I tested with a pc connected directly to the external interface and works well, but when I connect this interface to the internet and tried to connect to the vpn user I can see it in the newspapers and unable to connect with error 800.

Request TCP and eliminated from "public_ip_client/61648" outdoors: publicip_outside_interface / 1723 "

Can help me please?, very thanks in advance!

(running configuration)

: Saved

:

ASA Version 8.4 (3)

!

ciscoasa hostname

activate the password * encrypted

passwd * encrypted

names of

!

interface Ethernet0/0

switchport access vlan 2

!

interface Ethernet0/1

!

interface Ethernet0/2

!

interface Ethernet0/3

!

interface Ethernet0/4

!

interface Ethernet0/5

!

interface Ethernet0/6

!

interface Ethernet0/7

!

interface Vlan1

nameif inside

security-level 100

the IP 192.168.0.1 255.255.255.0

!

interface Vlan2

nameif outside

security-level 0

IP address publicinternetaddress 255.255.255.0

!

passive FTP mode

permit same-security-traffic inter-interface

permit same-security-traffic intra-interface

network obj_any object

subnet 0.0.0.0 0.0.0.0

network gatewayono object

Home gatewayofinternetprovideraccess

Description salida gateway ono

service remotointerno object

service destination tcp 3389 eq

Remote description

network pb_clienteing_2 object

host 192.168.0.15

Description Pebble client food bowl 2

service remotoexternopebble object

Service tcp destination eq 5353

Description remotoexterno

network actusmon object

Home 192.168.0.174

Description web news monitor

the Web object service

Service tcp destination eq www

Description 80

irdeto network object

Home 192.168.0.31

Irdeto description

network nmx_mc_p object

host 192.168.0.60

Main description of NMX multichannel

network nmx_mc_r object

Home 192.168.0.61

Description NMX multichannel reserva

network tarsys object

host 192.168.0.10

Tarsys description

network nmx_teuve object

host 192.168.0.30

Nmx cabecera teuve description

tektronix network object

host 192.168.0.20

Tektronix vnc description

vnc service object

destination eq 5900 tcp service

Description access vnc

service exvncnmxmcr object

Service tcp destination EQ. 5757

Access vnc external nmx mc figurative description

service exvncirdeto object

Service tcp destination eq 6531

Description access vnc external irdeto

service exvncnmxmcp object

Service tcp destination eq 5656

service exvnctektronix object

Service tcp destination eq 6565

service exvncnmxteuve object

Service tcp destination eq 6530

ssh service object

tcp destination eq ssh service

service sshtedialexterno object

Service tcp destination eq 5454

puertosabiertos tcp service object-group

Remotedesktop description

EQ port 3389 object

object-group Protocol TCPUDP

object-protocol udp

object-tcp protocol

the DM_INLINE_NETWORK_1 object-group network

network-object object irdeto

network-object object nmx_mc_p

network-object object nmx_mc_r

network-object object nmx_teuve

tektronix network-object

object-group service udp vpn

EQ port 1723 object

DM_INLINE_TCP_1 tcp service object-group

EQ object of the https port

EQ pptp Port object

the DM_INLINE_NETWORK_2 object-group network

network-object object actusmon

network-object object tarsys

inside_access_in remotointerno permitted object extended access list a whole

inside_access_in list extended access allowed object ssh a whole

inside_access_in list extended access allowed object-group TCPUDP any any eq www

inside_access_in list extended access permit icmp any one

inside_access_in list extended access allowed object vnc a whole

inside_access_in of access allowed any ip an extended list

outside_access_in list extended access allowed object remotointerno any object pb_clienteing_2

outside_access_in list extended access allowed object-group TCPUDP any object actusmon eq www

access-list outside_access_in note Acceso tedial ssh

outside_access_in list extended access permit tcp any object tarsys eq ssh

outside_access_in list extended access allowed object vnc any object-group DM_INLINE_NETWORK_1

outside_access_in list extended access permit tcp any any DM_INLINE_TCP_1 object-group

outside_access_in list extended access deny icmp a whole

access-list standard corporate allowed 192.168.0.0 255.255.255.0

Split-Tunnel-ACL access-list allowed standard 192.168.0.0 255.255.255.0

pager lines 24

Enable logging

monitor debug logging

logging of debug asdm

Debugging trace record

Within 1500 MTU

Outside 1500 MTU

IP local pool 192.168.0.100 - 192.168.0.110 mask 255.255.255.0 clientesvpn

IP local pool clientesvpn2 192.168.1.120 - 192.168.1.130 mask 255.255.255.0

ICMP unreachable rate-limit 1 burst-size 1

ICMP allow any inside

ICMP allow all outside

don't allow no asdm history

ARP timeout 14400

NAT (exterior, Interior) static source any service of actusmon of interface static destination Web one-way Web interface

NAT (exterior, Interior) static source to any destination interface interface static tarsys one-way sshtedialexterno ssh service

NAT (exterior, Interior) static source any destination interface interface static one-way pb_clienteing_2 service remotoexternopebble remotointerno

NAT (exterior, Interior) static source any destination interface interface static irdeto one-way exvncirdeto vnc service

NAT (exterior, Interior) static source any destination interface interface static one-way vnc exvncnmxmcp service nmx_mc_p

NAT (exterior, Interior) static source any destination interface interface static one-way vnc exvncnmxmcr service nmx_mc_r

NAT (exterior, Interior) static source any destination interface interface static one-way vnc exvncnmxteuve service nmx_teuve

NAT (exterior, Interior) static source any destination interface interface static tektronix one-way exvnctektronix vnc service

NAT (all, outside) interface dynamic source DM_INLINE_NETWORK_2

inside_access_in access to the interface inside group

Access-group outside_access_in in interface out by-user-override

Route outside 0.0.0.0 0.0.0.0 gatewayinternetprovideracces 1

dynamic-access-policy-registration DfltAccessPolicy

identity of the user by default-domain LOCAL

EOU allow none

local AAA authentication attempts 10 max in case of failure

Enable http server

http 192.168.0.0 255.255.255.0 inside

No snmp server location

No snmp Server contact

Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start

No vpn sysopt connection permit

Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac

Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac

Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac

Crypto ipsec transform-set esp-3des esp-md5-hmac ikev1 clientewindowsxp

IKEv1 crypto ipsec transform-set clientewindowsxp transport mode

Crypto ipsec transform-set ikev1 L2TP-IKE1-Transform-Set esp - aes esp-sha-hmac

Crypto ipsec ikev1 transit mode L2TP-IKE1-Transform-Set transform-set

Crypto ipsec ikev2 ipsec-proposal OF

encryption protocol esp

Esp integrity sha - 1, md5 Protocol

Crypto ipsec ikev2 proposal ipsec 3DES

Esp 3des encryption protocol

Esp integrity sha - 1, md5 Protocol

Crypto ipsec ikev2 ipsec-proposal AES

Esp aes encryption protocol

Esp integrity sha - 1, md5 Protocol

Crypto ipsec ikev2 ipsec-proposal AES192

Protocol esp encryption aes-192

Esp integrity sha - 1, md5 Protocol

Crypto ipsec ikev2 AES256 ipsec-proposal

Protocol esp encryption aes-256

Esp integrity sha - 1, md5 Protocol

crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 1 set transform-set clientewindowsxp ikev1

crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 1jeu ikev2 AES256 AES192 AES 3DES ipsec-proposal OF

Crypto-map dynamic L2TP - map 10 set transform-set L2TP-IKE1-Transform-Set ikev1

inside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

inside crypto map inside_map interface

outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

Crypto map L2TP - VPN - dynamic 20-isakmp ipsec L2TP-map map

L2TP-VPN-card interface card crypto outside

Crypto ca trustpoint _SmartCallHome_ServerCA

Configure CRL

IKEv2 crypto policy 1

aes-256 encryption

integrity sha

Group 2 of 5

FRP sha

second life 86400

IKEv2 crypto policy 10

aes-192 encryption

integrity sha

Group 2 of 5

FRP sha

second life 86400

IKEv2 crypto policy 20

aes encryption

integrity sha

Group 2 of 5

FRP sha

second life 86400

IKEv2 crypto policy 30

3des encryption

integrity sha

Group 2 of 5

FRP sha

second life 86400

IKEv2 crypto policy 40

the Encryption

integrity sha

Group 2 of 5

FRP sha

second life 86400

Crypto ikev2 activate out of service the customer port 443

trustpoint to ikev2 crypto Ingeniería remote access

Crypto ikev1 allow inside

Crypto ikev1 allow outside

IKEv1 crypto policy 5

preshared authentication

3des encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 10

authentication crack

aes-256 encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 20

authentication rsa - sig

aes-256 encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 30

preshared authentication

aes-256 encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 40

authentication crack

aes-192 encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 50

authentication rsa - sig

aes-192 encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 60

preshared authentication

aes-192 encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 70

authentication crack

aes encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 80

authentication rsa - sig

aes encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 90

preshared authentication

aes encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 100

authentication crack

3des encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 110

authentication rsa - sig

3des encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 130

authentication crack

the Encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 140

authentication rsa - sig

the Encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 150

preshared authentication

the Encryption

sha hash

Group 2

life 86400

Telnet 192.168.0.0 255.255.255.0 inside

Telnet timeout 5

SSH timeout 5

Console timeout 0

dhcpd dns 8.8.8.8

dhcpd outside auto_config

!

dhcpd address 192.168.0.5 - 192.168.0.36 inside

dhcpd dns 8.8.8.8 8.8.4.4 interface inside

dhcpd auto_config outside interface inside

dhcpd allow inside

!

no basic threat threat detection

no statistical access list - a threat detection

no statistical threat detection tcp-interception

SSL-trust Ingeniería out point

WebVPN

tunnel-group-list activate

internal DefaultRAGroup group strategy

attributes of Group Policy DefaultRAGroup

WINS server no

Server 192.168.0.1 DNS value

Protocol-tunnel-VPN l2tp ipsec

by default no

attributes of Group Policy DfltGrpPolicy

value of server DNS 8.8.8.8

L2TP ipsec VPN-tunnel-Protocol ikev1, ikev2

internal engineering group policy

attributes of Ingeniería group policy

Protocol-tunnel-VPN l2tp ipsec

by default no

L2TP-policy group policy interns

attributes of L2TP-policy-group policy

value of server DNS 8.8.8.8

Protocol-tunnel-VPN l2tp ipsec

Split-tunnel-policy tunnelspecified

Split-tunnel-network-list value Split-Tunnel-ACL

Intercept-dhcp enable

username, password Ingeniería 4fD/5xY/6BwlkjGqMZbnKw is encrypted nt privilege 0

Ingeniería username attributes

VPN-group-policy Ingeniería

password rjuve SjBNOLNgSkUi5KWk/TUsTQ user name is nt encrypted

attributes global-tunnel-group DefaultRAGroup

address clientesvpn pool

address clientesvpn2 pool

authentication-server-group (outside LOCAL)

LOCAL authority-server-group

Group Policy - by default-L2TP-policy

authorization required

IPSec-attributes tunnel-group DefaultRAGroup

IKEv1 pre-shared-key *.

tunnel-group DefaultRAGroup ppp-attributes

No chap authentication

ms-chap-v2 authentication

!

class-map inspection_default

!

!

type of policy-card inspect dns preset_dns_map

parameters

maximum message length automatic of customer

message-length maximum 512

Policy-map global_policy

!

context of prompt hostname

anonymous reporting remote call

Cryptochecksum:59b54f1d10fe829aeb47bafee57ba95e

: end

don't allow no asdm history

I ramon I guess that service policy is not applied in the firewall. So it does not not trust other than the same audience segment.

Apply like this.

global_policy global service policy.

because according to the configs old, I see that the policy has not been applied. Please let me know the results.

Please rate if the given info can help.

Router vpn site to site PIX and vpn client

I have two on one interface on the pix vpn connections that terminate VPN. client vpn and VPN site-to-site have passed phase one and two and decrypt and encrypt the packets. However as in another post I can not ping through the l2l vpn. I checked this isn't a nat problem a nd two NAT 0 on the pix and the NAT on the router access lists work correctly.

ISAKMP crypto RTR #show its
IPv4 Crypto ISAKMP Security Association
status of DST CBC State conn-id slot
66.x.x.x 89.x.x.x QM_IDLE 2001 0 ACTIVE

IPv6 Crypto ISAKMP Security Association

local ident (addr, mask, prot, port): (192.168.2.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (192.168.10.0/255.255.255.0/0/0)
current_peer 66.x.x.x port 500
LICENCE, flags is {origin_is_acl},
#pkts program: 23583, #pkts encrypt: 23583 #pkts digest: 23583
#pkts decaps: 18236, #pkts decrypt: 18236, #pkts check: 18236
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, #pkts compr. has failed: 0
#pkts not unpacked: 0, #pkts decompress failed: 0
#send 40, #recv errors 0

local crypto endpt. : 89.x.x.x, remote Start crypto. : 66.x.x.x
Path mtu 1380, ip mtu 1380, ip mtu BID Dialer0
current outbound SPI: 0xC4BAC5E (206285918)

SAS of the esp on arrival:
SPI: 0xD7848FB (225986811)
transform: aes - esp esp-sha-hmac.
running parameters = {Tunnel}
Conn ID: 3, flow_id: Motorola SEC 1.0:3, card crypto: PIX_MAP
calendar of his: service life remaining (k/s) key: (4573083/78319)
Size IV: 16 bytes
support for replay detection: Y
Status: ACTIVE

the arrival ah sas:

SAS of the CFP on arrival:

outgoing esp sas:
SPI: 0xC4BAC5E (206285918)
transform: aes - esp esp-sha-hmac.
running parameters = {Tunnel}
Conn ID: 4, flow_id: Motorola SEC 1.0:4, card crypto: PIX_MAP
calendar of his: service life remaining (k/s) key: (4572001/78319)
Size IV: 16 bytes
support for replay detection: Y
Status: ACTIVE

outgoing ah sas:

outgoing CFP sas:

Expand the IP NAT access list
10 deny ip 192.168.2.0 0.0.0.255 192.168.10.0 0.0.0.255 (21396 matches)
20 permit ip 192.168.2.0 0.0.0.255 everything (362 matches)
Expand the IP VPN_ACCESS access list
10 permit ip 192.168.20.0 0.0.0.255 192.168.10.0 0.0.0.255 (39724 matches)

I looked on the internet and that it points to a routing error when packets are being encrypted and decrypted, but you can't do a ping on the binding. However when I test the connection I did not enter any of the static routes that networks are connected directly on each side of the pix and the router. any help would be a preciated as I think there's maybe something is blocking the ping to reach the internal network at the end of pix with a configured access list.

is ping failure of the only thing between the site to site VPN? and assuming that all other traffic works fine since it decrypts and encrypts the packets.

If it's just ping, then activate pls what follows on the PIX:

If it is version 6.3 and below: fixup protocol icmp

If it is version 7.0 and higher: select "inspect icmp" under your political map of the world.

Config complete hand and on the other could help determine if it's a configuration problem or another problem.

Cisco VPN client put in place

Hi guru of cisco

Help me please to configure VPN access on ASA 5505 for Cisco VPN Client. I want to let the customers gateway, but access remote 192.168.17.0/24 and 192.168.10.0/24 (connected through site-to-site) networks.

Will be much appreciated for your help.

My config:

Output from the command: 'display conf '.

!
ASA Version 8.2 (2)
!
name of host host1
domain domain name
activate the encrypted password password
encrypted passwd password
names of
!
interface Vlan1
Description INTERNET
0000.0000.0001 Mac address
nameif WAN
security-level 0
IP address a.a.a.a 255.255.255.248 watch a1.a1.a1.a1
OSPF cost 10
!
interface Vlan2
OLD-PRIVATE description
0000.0000.0102 Mac address
nameif OLD-private
security-level 100
IP 192.168.17.2 255.255.255.0 watch 192.168.17.3
OSPF cost 10
!
interface Vlan6
Description MANAGEMENT
0000.0000.0106 Mac address
nameif management
security-level 100
IP 192.168.1.2 255.255.255.0 ensures 192.168.1.3
OSPF cost 10
!
interface Vlan100
Failover LAN Interface Description
!
interface Ethernet0/0
!
interface Ethernet0/1
Shutdown
!
interface Ethernet0/2
Shutdown
!
interface Ethernet0/3
Shutdown
!
interface Ethernet0/4
Shutdown
!
interface Ethernet0/5
switchport access vlan 100
!
interface Ethernet0/6
switchport trunk allowed vlan 2.6
switchport mode trunk
!
interface Ethernet0/7
Shutdown
!
boot system Disk0: / asa822 - k8.bin
passive FTP mode
DNS domain-lookup WAN
DNS server-group DefaultDNS
Server name dns.dns.dns.dns
domain domain name
permit same-security-traffic intra-interface
object-group Protocol TCPUDP
object-protocol udp
object-tcp protocol
object-group service RDP - tcp
RDP description
EQ port 3389 object
object-group Protocol DM_INLINE_PROTOCOL_1
ip protocol object
icmp protocol object
object-protocol udp
object-tcp protocol
Access extensive list ip 192.168.17.0 LAN_nat0_outbound allow 255.255.255.0 192.168.10.0 255.255.255.0
Standard access list LAN_IP allow 192.168.17.0 255.255.255.0
WAN_access_in list of allowed ip extended access all any debug log
WAN_access_in list extended access allowed icmp a.a.a.a 255.255.255.248 192.168.10.0 255.255.255.0 inactive debug log
WAN_access_in list extended access permit tcp any object-group RDP any RDP log debugging object-group
WAN_access_in list extended access allowed icmp a.a.a.a 255.255.255.248 a.a.a.a 255.255.255.248 debug log
MANAGEMENT_access_in list of allowed ip extended access all any debug log
access-list extended OLD-PRIVATE_access_in any allowed ip no matter what debug log
access-list OLD-PRIVATE_access_in allowed extended object-group DM_INLINE_PROTOCOL_1 interface OLD-private 192.168.10.0 255.255.255.0 inactive debug log
access-list OLD-PRIVATE_access_in allowed extended object-group TCPUDP interface OLD-private no matter what inactive debug log
access-list OLD-PRIVATE_access_in allowed extended icmp host 192.168.10.254 interface private OLD newspaper inactive debugging
access-list OLD-PRIVATE_access_in allowed extended icmp host 192.168.17.155 interface private OLD newspaper debugging
access-list 101 extended allow host tcp 192.168.10.7 any eq 3389 debug log
Access extensive list ip 192.168.17.0 WAN_1_cryptomap allow 255.255.255.0 192.168.10.0 255.255.255.0
WAN_1_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.10.0 255.255.255.0
WAN_cryptomap_2 to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.10.0 255.255.255.0
Capin list extended access permit ip host 192.18.17.155 192.168.10.7
Capin list extended access permit ip host 192.168.10.7 192.168.17.155
LAN_access_in list of allowed ip extended access all any debug log
Access extensive list ip 192.168.17.0 WAN_nat0_outbound allow 255.255.255.0 192.168.10.0 255.255.255.0
WAN_nat0_outbound list of allowed ip extended access all 192.168.17.240 255.255.255.252
WAN_nat0_outbound to access extended list ip 192.168.2.0 allow 255.255.255.0 192.168.2.0 255.255.255.248
Access extensive list ip 192.168.17.0 WAN_2_cryptomap allow 255.255.255.0 192.168.10.0 255.255.255.0
permit inside_nat0_outbound to access extended list ip 192.168.10.0 255.255.255.0 192.168.17.0 255.255.255.0
LAN_IP_inbound list standard access allowed 192.168.10.0 255.255.255.0
Standard access list IPSec_VPN_splitTunnelAcl allow a
access extensive list ip 192.168.17.0 vpnusers_splitTunnelAcl allow 255.255.255.0 any
sheep - in extended Access-list allow IP 192.168.17.0 255.255.255.0 192.168.2.0 255.255.255.0
vpn_ipsec_splitTunnelAcl list standard access allowed 192.168.2.0 255.255.255.0
pager lines 24
Enable logging
logging trap information
asdm of logging of information
Debugging trace record
MTU 1500 WAN
MTU 1500 OLD-private
MTU 1500 management
mask 192.168.1.150 - 192.168.1.199 255.255.255.0 IP local pool VPN_Admin_IP
IP local pool vpnclient 192.168.2.1 - 192.168.2.5 mask 255.255.255.0
failover
primary failover lan unit
failover lan interface failover Vlan100
15 75 holdtime interface failover pollTime
key changeover *.
failover interface ip failover 192.168.100.1 255.255.255.0 ensures 192.168.100.2
ICMP unreachable rate-limit 1 burst-size 1
ICMP permitted host b.b.b.b WAN
ICMP allow 192.168.10.0 255.255.255.0 WAN
ICMP permitted host c.c.c.c WAN
ICMP allow 192.168.17.0 255.255.255.0 WAN
ICMP deny any WAN
ICMP permitted host OLD-private b.b.b.b
ICMP allow 192.168.10.0 255.255.255.0 OLD-private
ICMP allow 192.168.17.0 255.255.255.0 OLD-private
ICMP permitted host c.c.c.c OLD-private
ICMP permitted host b.b.b.b management
ICMP permitted host 192.168.10.0 management
ICMP permitted host 192.168.17.138 management
ICMP permit 192.168.1.0 255.255.255.0 management
ICMP permitted host 192.168.1.26 management
ASDM image disk0: / asdm - 631.bin
don't allow no asdm history
ARP timeout 14400
Global (WAN) 1 interface
Global (OLD-private) 1 interface
Global interface (management) 1
NAT (OLD-private) 0-list of access WAN_nat0_outbound
NAT (OLD-private) 1 0.0.0.0 0.0.0.0
WAN_access_in access to the WAN interface group
Access-group interface private-OLD OLD-PRIVATE_access_in
Access-group MANAGEMENT_access_in in the management interface
Route WAN 0.0.0.0 0.0.0.0 a.a.a.185 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
local AAA authentication attempts 10 max in case of failure
Enable http server
http 192.168.1.0 255.255.255.0 WAN
http 0.0.0.0 0.0.0.0 WAN
http a.a.a.a 255.255.255.255 WAN
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Service resetoutside
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
card crypto WAN_map 1 corresponds to the address WAN_1_cryptomap
card crypto WAN_map 1 set peer b.b.b.b
WAN_map 1 transform-set ESP-DES-SHA crypto card game
card crypto WAN_map WAN interface
ISAKMP crypto enable WAN
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
the Encryption
sha hash
Group 1
life 86400
Telnet timeout 5
SSH b.b.b.b 255.255.255.255 WAN
SSH timeout 30
SSH version 2
Console timeout 0
dhcpd auto_config OLD-private
!

a basic threat threat detection
host of statistical threat detection
Statistics-list of access threat detection
a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200
NTP server 129.6.15.28 source WAN prefer
WebVPN
attributes of Group Policy DfltGrpPolicy
Protocol-tunnel-VPN IPSec svc webvpn
internal admin group strategy
group admin policy attributes
DNS.DNS.DNS.DNS value of DNS server
Protocol-tunnel-VPN IPSec
internal vpn_ipsec group policy
attributes of the strategy of group vpn_ipsec
value 192.168.17.80 DNS server dns.dns.dns.dns
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list vpn_ipsec_splitTunnelAcl
the address value vpnclient pools
username admin password encrypted password privilege 15
n1ck encrypted password privilege 15 password username
type tunnel-group admin remote access
tunnel-group admin general attributes
address pool IPSec_VPN_pool
vpnclient address pool
LOCAL authority-server-group
strategy-group-by default admin
tunnel-group admin ipsec-attributes
pre-shared-key *.
tunnel-group b.b.b.b type ipsec-l2l
tunnel-group b.b.b.b General-attributes
strategy-group-by default admin
b.b.b.b tunnel ipsec-attributes group
pre-shared-key *.
NOCHECK Peer-id-validate
type tunnel-group vpn_ipsec remote access
tunnel-group vpn_ipsec General-attributes
vpnclient address pool
Group Policy - by default-vpn_ipsec
vpn_ipsec group of tunnel ipsec-attributes
pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect the icmp

Thanks a lot for the confirmation. There is some lack of configurations and also some configuration errors.

They are here:

(1) Split tunnel-access list is incorrect:

vpn_ipsec_splitTunnelAcl list standard access allowed 192.168.2.0 255.255.255.0

It should be allowed in your internal network. Please, add and remove the following:

standard access list vpn_ipsec_splitTunnelAcl allow 192.168.17.0 255.255.255.0

No vpn_ipsec_splitTunnelAcl of the standard access list only allowed 192.168.2.0 255.255.255.0

(2) NAT 0-list of access should also include the traffic between the local subnet to the Pool of IP VPN:

Access extensive list ip 192.168.17.0 WAN_nat0_outbound allow 255.255.255.0 192.168.2.0 255.255.255.0

(3) dynamic-map has not been created and assigned to crypto card:

Crypto-map dynamic dynmap 10 game of transformation-ESP-3DES-SHA

card crypto ipsec WAN_map 65000-isakmp dynamic dynmap

(4) Finally, you have not enabled protocol IPSec in your group strategy:

attributes of the strategy of group vpn_ipsec

Protocol-tunnel-VPN IPSec

Hope that helps.

If it still does not after the changes described above, please kindly share the latest config and also the output of the following debugs when you try to connect:

debugging cry isa

debugging ipsec cry

Cisco VPN Client causes a blue screen crash on Windows XP Pro (Satellite M30)

Hello

I have a Satellite Pro M30 running Windows XP Professional.

After you start a vpn Tunnel via a customer of Cisco VPN (Version 4.6 and 4.7), the system crashes with a blue screen.

I see that the key exchange is successful, but immediately after the vpn connection is established Windows XP crashes with a blue screen.

Someone has any idea how to solve this problem?

Perhaps by the updated device driver? And if so, which driver should be updated?

Kind regards

Thorsten

Hello

Well, it seems that the Cisco client is a problem.
I m unaware of this product because it of not designed by Toshiba.
I think that the drivers are not compatible with the Windows operating system.
However, I found this site troubleshooting cisco vpn client:
Please check this:
http://www.CITES.uiuc.edu/wireless/trouble-index.html

R7000 vpn client.crt file is empty

My version is 1.0.4.30_1.1.67.

After you generate files of VPNs, client.crt file is empty 0 byte.

The other files are correct.

Can anyone help?

Thank you.

Hi @jli

Welcome to the community!

Try to use the latest beta of firmware 1.0.5.60.

Professional Windows Vista crashes when you use Cisco VPN Client 5.05.0290

I have a Dell Latitude E6400 Windows Vista Business (32 bit) operating system. When I go to turn on the VPN client, I get invited to my username / password and once entered, the system just hangs. The only way to answer, it's a re-start. I took action:

1 disabled UAC in Windows
2 tried an earlier version of the VPN client
3. by the representative of Cisco, I put the application runs as an administrator

If there are any suggestions or similar stories, I would be grateful any offereings.

It IS the COMODO Firewall with the 5.0.x CISCO VPN client that causes the gel. The last update of COMODO has caused some incompatibility. I tried to install COMODO without the built in Zonealerm, but it is still frozen. The only way to solve it is to uninstall COMODOD. Since then, my CISCO VPN client works again...

E3000 VPN Client

Hi, I'm in the strong for the purchase of a new router for my home network and want to use a router from Cisco series e.

On this router, I want to be able to connect with a client through the Internet to my home network using a VPN client.

I have some experience with the E2000, but this model does not have this feature.

The E3000 has this feature? If not, is there a model of the E series that does?

Thanks in advance for your answer.

Robert

Linksys consumer routers do not have this feature. You look at Cisco Small Business or better for VPN access.

Linksys Cisco VPN Client connection drops

I have a Linksys BEFVP41 V2. I have a PC running Windows XP SP2 with customer VPN Cisco 5.0.00.0340. I have a problem when I log in the VPN client with my employer network. It seems to be ok. No problem to do the job, hit their proxy server, etc.. All of a sudden, the connection drops. It seems to 'freeze' the network. No surfing, without PuTTY. Sometimes 5 minutes after the connection or 3 hours later. I have to disconnect the VPN connection, and then reconnect. What could be the problem? My MTU is set to 1432. The Windows Firewall has exceptions for ports 10000, 4500 and 62515. I have a network in place at 172.20.x.x... not the default or typical 10.x.x.x network. Firmware is 1.01.04 on the router.

Failure of VPN Client

Similar Questions

Maybe you are looking for