Microsoft Windows 7 start and stop

Similar Questions

• Audio playback starts and stops after a few seconds

  original title: Audio playback

  By my speakers (Windows 7) starts and stops after a few seconds.  I have troubleshooted but found no problem.  I configured and tested with good results, but the problem persists.  Anyone else know this or knows how to solve the problem? PLEASE HELP :)

  Hi NuttyNetty444,

  If you have not already the case, follow the steps in this document. This should solve most common sound problems in Windows.

• Microsoft Windows Spooler SubSystem App stopped working and was closed, rises whenever I starts and sometimes my printer driver or the printer disappear!

  Whenever I start my computer when desktop comes up, I get this msg from Microsoft Windows: Spooler subsystem App stopped working and was closed. Most of the time I can still print but occasionally (when I need to print) my printer is missing, and the driver is not installed it is said. I got my printer mfg reinstall constantly for the last 2 weeks because of this problem! Peut anyonehelp!

  Try this:

  http://support.Microsoft.com/GP/printing_problems

• Start and stop is slow in Windows 7

  Original title: I desperately need some help here.

  I have a Toshiba LT, running the Windows 7 operating system. Start and stop is slow, so I downloaded

  MicrosoftFixit to analyze and fix my computer. It is scanned and was told that more than one anti-virus program is running, I'm only using Microsoft

  Security Essentials, also more than one user is logged on when I'm the only person using this computer!

  Several programs are currently running in the background at the start and during the shut down, but I can safely remove. Help, please!

  Hello

  Have you made changes on the computer before this problem?

  Method 1: Resolution of Performance problems.

   

  Optimize Windows 7 for better performance

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

   

  Method 2:

   

  Step 1: Check in safe mode.

   

   

  You can also check if the problem persists in safe mode.

  Reference:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

   

  Step 2: Perform a clean boot and check.

   

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  
  Please note:  After troubleshooting, be sure to start your computer in normal mode by following step 7.

  Hope the above information is helpful.

• MICROSOFT WINDOWS SEARCH INDEXING HAS STOPPED WORKING AND WAS CLOSED

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: Links Internet and e-mail freezes, slow, screen turns off and stops.  When I get the system operational, I get the message MICROSOFT WINDOWS SEARCH INDEXER has STOPPED working AND WAS CLOSED.  Can not activate system restore to go back.

  Hello

  • What e-mail client is installed on your computer?
  • Is the system restore feature is disabled or there is no available system restore point?

  For Internet Explorer from freezing, you can optimize Internet Explorer and see if the problem still occurs.

  How to optimize Internet Explorer

  Because of Windows search indexer, it seems that there is a fix available, you can contact Microsoft Customer Service & provide article kb 952053, which contains the fix.

  Hope the helps of information. Please post back and we do know.
  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to stop the EN icon appear in Windows 7 Pro to start and stop

  I have a language loaded on my computer.  Whenever the computer starts and stops at the icon IN displayed on the screen.  I looked in the obvious places like Start > Control Panel > clock, language and region, for a possible solution for this turn.  The language toolbar is turned off and is not reduced to a minimum or displayed anywhere.

  How can I prevent the EN icon appears?

  Thanks Omnicore you snapped.

  I don't know if that has an effect, but under keyboards, I got two installed?  The keyboard for the United States and the other for the United Kingdom.  I deleted the one for US as I am in England, applies the settings and rebooted the system.  The stop screen does not display the icon of EN, but on the home screen icon EN reappeared.

  So I applied the settings of copy on the administration tab, and after the system restarts, it erased the EN icon on hospitality and the stop of the screens.

  I appreciate you taking the time and allows you to reconfigure your computer to solve this problem for me.

• Start and stop too slow

  My computer starts and stops very very slow (more than 3 minutes)

  Hi AngelAcevedo,

  ·         Did you do changes on the computer before the show?

  ·         The startup problem occurs after the connection or if you are referring to restart is slow?

  Follow these methods.

  Method 1: Run the disk cleanup tool.

  Description of the tool in Windows XP disk cleanup

  http://support.Microsoft.com/kb/310312

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to set performance options in Windows XP

  http://support.Microsoft.com/kb/308417

  For reference:

  How to make a computer faster: 6 ways to speed up your PC

  http://www.Microsoft.com/atwork/maintenance/speed.aspx

• I installed G10-ebook but when open it and write down the username and password it starts and stops immediately and closes what should I do?

  I installed G10-ebook but when open it and write down the username and password it starts and stops immediately and closes what should I do?

  Hello

  Step 1: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.
  The System Configuration Utility dialog box appears.
  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• Start and stop problems under Vista

  My PC has started taking much time to stop and start.  I didn't install something again and stopped all my programs auto starting but always start and stop takes forever. Can help in any...

  Hello

  Make sure you have the services Superfetch and ReadyBoost are running and then try to speed up the boot with the help of my guide [1]. This causes the prefetcher in Windows Vista. This increase startup performance a lot. All other tweaking tools are useless. Use this method only with the Microsoft Toolkit.

  If it is not to speed up the startup process, follow my guide [2] to start track and to compress theboot_BASE + CSWITCH + DRIVERS + POWER_1.etl as RAR or 7z, also make a trace of the judgment and compress theshutdown_BASE + CSWITCH + DRIVERS + POWER_1.etl too and download the 2 files zip on your Skydrive [3] and post the link here.

  I take a look at the trace, maybe I see what's wrong with your Windows.

  André

  [1] http://www.msfn.org/board/index.php?showtopic=140262
  [2] http://www.msfn.org/board/index.php?showtopic=140247
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65 [3] "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Long start and stop times, offline files

  Systems Windows Vista, Windows 8 server, roaming profiles, Outlook using POP3 Microsoft DPM.  local copies of offline files are set to encrypt.

  Because of past problems with several revisions of files group policy is set to synchronize the start and stop.
  Users are complaining of delays and slow performance during periods of start-up and shutdown.  I suspect that this is because of the synchronization.
  What is available to speed up the synchronization process or to monitor the total size and the speed of the process?

  Server gurus hang out in Windows Server support forums, better to ask this kind of question it:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• sound does not play when windows vista starts or stop

  sound does not play when windows vista starts or stop

  Hello

  • When the issue started?
  • Will there be any changes made prior to this issue?
  • Otherwise, the sound works well?

  Step 1: Refer to "the startup sound is not played correctly when you start Windows XP or Windows Vista
  ' http://support.microsoft.com/kb/321735 '.

  Step 2: To change the sound on closing down.

  Audio a.Open and Sound themes by clicking the Start button, clicking Control Panel, hardware and sound, and then clicking sound.

  b. the sounds tab and then, in the list programs, select the event you want to change the sound.

  c.Under sounds, click the sound you want to associate with the event. If the sound you want to use is not listed, click Browse to locate it.

  'Change the sounds of the computer '.
  ": http://windows.microsoft.com/en-US/windows-vista/Change-computer-sounds "

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows install starts and goes out of order

  HI, every time I stat of the programs folder browser, (such as to open a file or save etc), Windows install start and the program become non responsive and I am forced to stop, all iodea how to fix it?

  HI, every time I stat of the programs folder browser, (such as to open a file or save etc), Windows install start and the program become non responsive and I am forced to stop, all iodea how to fix it?

  Hi, Douai,

  This phenomenon occurs with just one or all programs?

  Start > type CMD

  Right ClickON CMD and select run as administrator

  Type sfc/scannow

  Press enter

  Note: There is a space between sfc and / scannow

  Asked may to your WIndows Installation DVD if there is missing or corrupted files.  If the analysis shows a message "can not repair file...", you need to reinstall Windows OS.

  Try to unregister Windows Installer, and then reregister Windows Installer.

  To do this, follow these steps:

  a. Click Start, type cmd, right-click cmd, and then click Run as administrator.

  b. at the command prompt, type "msiexec /unreg" and press ENTER.

  (c) in the command prompt, type "msiexec/regserver" and press ENTER.

  d. check the difference.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/how-can-i-install-the-Windows-Installer-50/4a56421a-863c-4331-ada5-e2d503298a65

• Black horizontal lines on the LCD screen at a specific time during the start and stop

  Hi, I am currently using a Presario CQ61 Notebook PC.  My problem, as indicated in the title, are black lines on the LCD screen, apparently when the screen is reset or enclose itself turned off during the start and stop only. From the judgment, he produced a split second her stops the hard drive, after that the screen is black. The lines and then quickly disappear. At startup, lines appear after the Windows logo has passed and the screen went from black to start loading the login screen.

  The LCD is in perfect condition, all using the PC. No line, no discoloration, etc.. Nothing extraordinary either. The problem does occur only during these two periods, specifically. I am also unable to note the lines when I'm looking directly at the screen. I have to be standing next to the PC, at an angle.

  Now, I had this PC for a considerable amount of time, however, I never paid much attention to the screen when starting upwards or stop, so this could definitely be something that the laptop has done since I bought it. I also read on similar problems, and it could be an outdated video driver or BIOS.

  I want to just make sure that it is not a major problem. Thank you all!

  Hello

  You have a few options in my opinion please try these steps can help you solve your problem.

  1) click Start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility. Under the Services tab, click to select the hide all Microsoft services check box, and then go to tap Start , click on disable all. Click apply OK restart the device.

  (2) please visit the HP website and update the Bios and graphics drivers on the unit.

  Let us know how it goes!

  * Although I am an employee of HP, I speak for myself and not for HP.

  Click the White Star Kudos to say thank you *.

  Please check accept as Solution if it solves your problem *.

  Concerning

  Maton

• My Mac Mini is extremely slow and any video will start but soon stops and intermittently starts and stop immediately. What is the reason?

  My Mac Mini (end 2012) 2.5 ghz memory 8 GB Yosemite 10.10.5 is extremely slow. I read a few articles on communities, but unable to solve the problem. I plan to upgrade memory soon. In addition, a video game doesn't quite work. It starts and stops in 5 seconds and restarts it for a few seconds and stops completely. An advisor to fix the problem will be appreciated.

  When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• After installing something from windows update my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turn off.

  Hello

  After installing something from windows update (about 300 MB in size) my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turns off.
  Then a window pops up saying "Startup Repair cannot repair this computer automatically.
  The details of the problem say;
  Problem event name: StartupRepairV2
  Signature of the problem 01: AutoFailover
  Signature of the problem 02: 6.0.6001.18000.6.0.6001.18000
  Signature of the 04:65537 problem
  Signature of the problem 05: unknown
  Signature of the 06 problem: BadDisk
  Signature of the 09 problem: unknown
  Signature of the 10:1168 problem

  System Restore does nothing, and all the other tools of recovery. :(

  Please help, it will be much apreciated :)
  DOM

  If you are sure that the problems began immediately after installing a Windows Update, use the free support of MS here:
  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.  MS - MVP - Elephant Boy computers - don't panic!