Windows install starts and goes out of order

Similar Questions

• After installing something from windows update my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turn off.

  Hello

  After installing something from windows update (about 300 MB in size) my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turns off.
  Then a window pops up saying "Startup Repair cannot repair this computer automatically.
  The details of the problem say;
  Problem event name: StartupRepairV2
  Signature of the problem 01: AutoFailover
  Signature of the problem 02: 6.0.6001.18000.6.0.6001.18000
  Signature of the 04:65537 problem
  Signature of the problem 05: unknown
  Signature of the 06 problem: BadDisk
  Signature of the 09 problem: unknown
  Signature of the 10:1168 problem

  System Restore does nothing, and all the other tools of recovery. :(

  Please help, it will be much apreciated :)
  DOM

  If you are sure that the problems began immediately after installing a Windows Update, use the free support of MS here:
  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.  MS - MVP - Elephant Boy computers - don't panic!

• just formatted my hard drive and xp wouldn't charge b/c he didn't see the hard drive. I then installed Windows 7 starter and cannot be upgraded

  I formatted my hard drive and xp wouldn't charge b/c he didn't see the hard drive. I then installed Windows 7 starter and cannot be upgraded. .

  Probably, you need to boot in the BIOS of the computer and changed on the hard drive in IDE mode, SATA, so it can be recognized by Windows XP.

  Before that you plan to replace Windows 7 with Windows XP. Have you tried to familiarize yourself with the operating system first?

  http://techingiteasy.WordPress.com/2009/08/19/for-the-former-Windows-XP-user-welcome-to-Windows-7/

  If you want to run Windows XP, you can consider to dual boot Windows 7 and Windows XP. You first need to know if your computer is compatible with Windows XP. Much more modern computers are gradually support for Windows XP.

  How dual boot Windows 7 and Windows XP
  http://notebooks.com/2011/02/01/how-to-dual-boot-Windows-7-and-Windows-XP-Part-1/

  With Windows XP installed first:
  http://notebooks.com/2011/02/17/how-to-dual-boot-Windows-7-and-Windows-XP-Part-2/

• Windows Vista boot and goes directly to the F8 screen

  Windows Vista Boot and goes directly to the F8 screen, when you select an option it the computer goes black and never start. I do not install any program again, I worked with my online banking and the computer freezes I turn it off and restart and from there to show this problem. I test the computer with seetools to test the hard drive but when I hit to accept the test the keyboard won't obey my order; later I test with Hiren and I could make a mini feture call windows xp here I could see the C drive and all files on this too, I was able to open it. What you think about that happening could be the operating system or perhaps another problem?

  Hello

  Please follow the steps mentioned in the link below.

  What to do if Windows does not start successfully http://windows.microsoft.com/en-US/windows-vista/What-to-do-if-Windows-wont-start-correctly

• Windows 7 starts, but goes to a black screen with the mouse before the Welcome screen

  Windows 7 starts up goes to the "starting windows" logo screen, then before you get to the homepage for a connection, becomes black and be left with just a cursor. tried to restart and start up repair but I have no way to access because of safe mode is the same thing then. What is the best way to fix this without losing all the stuff on my computer for work.

  Hello

  Remove all connected devices (except the mouse and keyboard if it is a desktop computer) to the computer and then try to start and check what is happening.

  You can try to boot from the installation disc, and then check if you are able to perform a startup repair, or run the Windows Memory Diagnostic tool.

  Follow the link below.

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  See also:

  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-memory-problems-on-your-computer

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows install start whenever I start office or other applications

  Hello
  I have a new dell laptop 1555 with Windows Vista32bit installed SP1. After you have installed an application on my new pc, I noticed a really annoying problem with windows install: whenever I start a program Suite Microsoft Office Enterprise 2007 (but not only, I have the same problem with other applications, i.e. a merger-splitter pdf free), windows install start to do don't know what who for several seconds (sometimes minutes) ('Wait Configuring Microsoft Office Enterprise 2007 "and then"install... (''), then the application starts successfully.

  I tried Windows Install Cleanup, remove Office Enterprise 2007, and then reinstall but nothing has changed. I read something on the web, but the only solution that has worked for a user with the same problem was to format and reinstall vista...

  can you help me please?

  Thank you very much

  Edit: also tried installing that: http://www.microsoft.com/downloadS/details.aspx?displaylang=it&FamilyID=5a58b56f-60b6-4412-95b9-54d056d6f9f4
  nothing has changed, please help me

  Hi Blain,

  First, create the new profile > make an admin account > and then reinstall office.

  If you need additional assistance, please see Office Online:
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Good luck.

  JohnD
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 starts and ends at a black screen

  Windows 7 starts and go through the loading screen and end up a black screen until password with the slider screen try and run across the network normal mode etc. and ends at the screen even please help

  If you can start the computer in an environment of Safe Mode with command prompt , you might be able to make the operational machine through the system restore. Here is an article on how to get if the process.

  Start the restore of the system from a command prompt

  If you can't in SafeMode with command prompt environment on initialize toward the top, you may need to use the recovery partition to reinstall Windows by default. The initialization process differs from manufacturer to another computer, but it involves usually typing a combination of key or combination of keys at startup.

  Note that this process will remove probably all documents, images, programmes, etc. that you have installed/created since owning the computer. for example, it will restore the computer to a State identical to when it left the factory. Use this class as a last resort and consider having a computer technology to remove the disk to retrieve all personal data (documents, photos, etc.) that are irreplaceable.

• CHKDSK runs everytime I turn on my computer, complete control, the computer tries to start and goes back to CHKDSK every time. Does this mean that my hard drive is crashed?

  CHKDSK finishes control, complete control, the computer tries to start and goes back to CHKDSK everytime, it means my hard drive crashed? and if so, can I just replace the hard drive and then have my technical support help reload my data?

  Hi Karen,.

  ·         Since when are you facing this problem?

  You can check if this article helps.

  CHKDSK runs each time that you start your computer

• Anyone know what is the price of Windows 7 Starter and Home Basic? I need to know the full version (not the cost of upgrade) price

  Anyone know what is the price of Windows 7 Starter and Home Basic? I need to know the price list of the full version (not the cost of upgrade)

  Windows 7 Starter is not available as a product of the retail. It only comes on new NetBook or Nettop computers.

  Windows 7 Home Basic Edition is only available in some markets, it will be difficult to find in the markets developed as the United States.

  Windows 7 price India

  Microsoft Store

  http://www.microsoftstore.co.in/Microsoft/38/ProductList/Windows.aspx

• Unrecognized works drivers and windows install on and on

  Dear Toshiba

  I need some advice and help on some problems with my laptop Toshiba Satellite L550D windows 7 (updated with windows 7 I have purchesed on your part).

  I searched on several Forums (forum of toshiba responses, Microsoft MSDN Web site), but I still have a few problems, and I do not hesitate to ask for help in this way.

  Question 1: My laptop does not recognize some drivers, and it happens as follows: I check in the Device Manager, device system, ATI i/o communications processor smbus controller, shows message: "no drivers are installed for this device. When I chek 'pilot' message: ' no file necessary drivers or embarked for this device.

  When I tried to update driver, there is automatically a message that this driver is up to date and in 'Browse my computer for driver software' we goes to the location of the driver file, and then select the driver to install, the installation of the driver, then "windows has successfully updated the driver software", has finished installing the driver for the software (see above the IO... ATI).

  After that, I downloaded all the drivers available from the Toshiba site yesterday for my OS and my product and the situation is the same, it shows NO file necessary drivers or have been loaded for this device.

  The same situation is with other equipment, as follows: timer event 2) precision, 3) numeric data processor, controller 4) programmable interrput, 5) speakers, 1 memory access controller) direct, clock system 6).

  Question 2: There is also another problem, that some downloaded drivers can be installed, as follows:

  (a) software modem of toshiba 2.2.97 (SM 2297ALDO4), message: you want to allow this program to make changes... ? I click 'Yes', but nothing happens.

  (b) parts of modem select Driver utility, it appears the message "cannot find the support device.

  (c) Mobility Center tiles pilot and driver DVD player, touch pad driver synaptics, for only three drivers there is no Install Shield Wizard on the screen, and installation does not start.

  (4) Toshiba vallue added package 1.2.25, message shows, 'Try to prepare InstallShield wizard', then 'another version of this product is already installed, installation of this version cannot continue. To configure or remove the existing version of this product, use Add/Remove programs from the control panel. {FEDD27A0-B306-45EF-BF58-B527406B42C8}.

  I tried to uninstall Toshiba value added package, but it shows that Error 1612 the installation source for this product is not available. Verify that the source exists and that you can access.

  I also noticed that the existing version on my laptop is 1.2.28 (of the 06.01.2010) and this downloaded version (that cannot be installed) is 1.1.1.4.

  Question No. 3: above all that, every time I have start or restart Windows 7, it displays the message 'windows install installation preparation', short-term, then disappears, (I collapsed, then activated and restarted Windows install) and the error is not resolved.

  How to remedy?

  Thank you

  I have after reading your long post m really to wonder: what do you do?
  DERA Jelena I installed Win7 Toshiba upgrades and clean install Win7 on more than 10 different Toshiba notebooks and didn t have a problem except the feature FN keys on an old Satellite A200.

  Anyway, when you upgrade pre-installed Vista notebook with original Toshiba upgrade kit you need to just follow the instructions you have with her. Instead of the first composite (drivers) drive and it will be your system and you inform that drivers must be removed from the system before the start of the Win7 update. When the drivers and some tools from Toshiba is deleted, you must use second upgrade for Win7 upgrade disk.
  After doing this put the first disk again and check for the installation of compatible drivers.

  That is so easy to do and I don't really understand what is happening with your laptop. After reading your ad I think you've done the installation of own OS and not an upgrade. What did you do exactly? I mean after upgrade cannot be so conflicts of hardware in Device Manager.

• Windows install disappeared and can not install 3.1 v2 or 4.5

  Help me please. All though so I can't install any software. It seems that windows intstaller disappeared.
  I haved downloaded and tried to install 4.5 and windows install 3.1 v2
  3.1 v2 tells me that it is older than my windows service.
  4.5 said it finished the installation but is not the case to find.
  I am at a loss to know what to do. Can someone help me please.
  I really appreciate it.
  I am running windows XP service pak 3 on a Toshiba satellite pro.
  Thank you
  Julie

  Hi juliescharlin,

  Thanks for posting. Please do the following to reinstall the Windows Installer component.

  1.	When the message Press any key to boot from the CD appears on your screen, press a key to start your computer from the Windows XP CD.
  2.	When you see the message to install Windows XP nowand then press ENTER is displayed on the Welcome to the Setup screen, press ENTER.
  3.	Do not choose the option to press R to use the Recovery Console.
  4.	In the Windows XP licensing agreement, press F8 to accept the license agreement.
  5.	Make sure that your current installation of Windows XP is selected in the box, and then press R to repair Windows XP.
  6.	Follow the instructions on the screen to complete the installation.

  I hope this helps!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How to ensure the backup of Windows 7 starts and runs until the end on a laptop which is mode standby, or could be put in mode 'sleep' when the lid is closed.

  Hello

  Many of us with laptops with Windows 7 would like to ensure that, when a Windows backup is scheduled, it starts successfully and goes to full completion, regardless of whether the phone is first 'sleep', or if the user of the laptop close the lid of the laptop, which would normally the laptop mode 'sleep'.  In other words, how to backup Windows or Windows 7 be configured to wake from mode "sleep" and prevent it from sleep mode, when a backup is scheduled and actively running?

  I saw a way to schedule a task that will wake the computer, but I'm looking for something more intelligent than that.  I'm looking to see if Microsoft has already thought this through and allow you to pre-configure operating system such as we have no additional installation software.

  Thank you

  Dave

  We continued this thread in http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/how-do-i-keep-windows-7-from-sleeping-in-the/9602fbe6-f9d2-461d-88ee-710369e6f543

• Stream video slowdown and going out of sync on Satellite P100 - 434 Vista

  I have a Satellite P100-434 pre-loaded with Windows Vista and WinDVD. During playback of DVD video, the video stream slows and goes badly synchronized with audio after a short period of normal play.

  The video then jumps and will be back in sync for a short time before going off again. I found references to this on a general search of the web with the only offer the solution of reloading with XP.

  I confirmed that with Windows XP Home edition, the problem does not occur, and with Vista it always happens with PowerDVD v7 good than not as pronounced. I would like suggestions as to the cause and possible solutions.

  Well, what to say seems the Vista itself or the drivers are responsible for this problem!
  As you already suggested the use of the Win XP operating system would be simpler!

  Anyway, the laptop uses the nVIDIA GeForce Go7600 FX card. Then first try to update the graphics driver and check a few improvements!
  Try to use the drivers from the site omegadrivers.net

  In addition I recommend you disable the acoustic silencer maybe it would help

• Lightroom 6 / Windows 7 / freezes and goes to not responding do not state on launch

  I just bought and office intstalled LR6 on my windows 7 (64B).  When he asked to import my photos that I stressed my "My pictures" directory and it treatment to import each photo/file in the directory... which was more 19 000.  He finished about 2 hours later... and seems to work correctly.  Now the two day I can't program for work at all.  The main screen of LR comes with pictures of mountain, but he's right there with the windows cursor (circle) is going round and round... forever.  When I do a mouse click on the screen, it just says: LR is not responding and I have to stop him.  Don't know what to do... any ideas?

  Can or should I do an uninstall and reinstalled?  Adobe will allow me to do it with the code already used?

  Any help appreciated... Thank you

  Pete

  Hi Pete,.

  Update of Lightroom in version 6.3 first, then check you suggest.

  Visit this link to download the version 6.3: keeping up-to-date for Lightroom

  Kind regards

  Claes

• Microsoft Windows 7 start and stop

  I need to know how to run an .exe on Windows 7 startup and stop file. Thank you!

  Hello Blaine,

  Thank you for your question.

  Right-click on your desktop,

  New-> shortcut

  Enter this in the txt-> shutdown.exe s

  To set the off timer, you enter the txt-> shutdown.exe s t - 45 c "your message".

  the '-t 45"is for seconds, you can change the 45 to any number you want.

  And the '-'your message' c is the message that you want to add. "

  Keep in mind, when you add a message (optional), you put quotes in there-c 'your message '.

  Then after--> the name of the shortcut

  Click Finish.

  If you want to add the icon of stop button for the shortcut that you do a right click on the shortcut-> properties-> tab 'Shortened'-> change icon. You find in the bottom of your tab "shortcut" in the properties.

  If you want a command that gives you a 10 seconds timer to turn off your PC, here's the command...

  Shutdown.exe s t - 10 c "the computer is shut down."

  You can put whatever you want in the ('message'-c), and (-s H0).

  Good luck