Microsoft windows xp home edition - stuck in the loop does not restart

Similar Questions

• Windows vista Home premium recovery question - how to get the source for windows vista home edition premium as the recovery does not work since the recovery partition

  How to get the source to windows vista Home premium recovery is not from the recovery partition and gives me an error message

  Hello

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Logon Windows XP Home Edition stuck in the loop - welcome to desktop without icons flash then disconnects from return to the Welcome screen

  @dallasdien: Judging by you in other threads (for example, http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/9ec0baff-5d84-4daf-8766-867bc77e34fd), your computer is still infected. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  PA Bear: It worked fine after analysis and cleaning, including the reboot until the download of updates on 11 September, which seems to be where a lot of other acquired problems. I don't think that it is still infected as each scan was clear.

• Windows Vista Home Basic - problem with the icons does not meet various Windows services after trying to download updates

  I use Windows Vista Home Basic on a Dell Inspiron 1501.  I have recently accepted that some guest downloads Windows with terrible results.  First downloads do not appear to have been accepted and the system of guard stop and startup trying to cancel.  Second as I result, I seem to have lost access to a range of Windows tools.  For example in Panel I can't open system icons or Windows Update.  Nor can I access these services from any other avenue on the computer.  Whenever I have find an icon or a file screen flashes a dialog briefly and then disappears.  The effect of this is that I'm completely unable to access or to implement the recommended tools or services that could solve this problem.  My ability to manage my computer has been reduced to zero.  Dell were not receptive and I can't get a response from Microsoft

  worm post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  One thing you can try try the system restore, safe mode.

  Start the computer in safe mode with networking capabilities (hold DOWN F8 while the computer starts).

  To start your computer in safe mode, you can check the link below:http://windowshelp.microsoft.com/Windows/en-US/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx>

• I am running Microsoft Windows XP Home edition Version 2002 Service pack 3, use the 32-bit or 64-bit upgrade to Windows 7 Home Premium?

  running Microsoft Windows XP Home edition Version 2002 Service pack 3, used the 32-bit or 64-bit Windows 7 Home Premium upgrade?

  I followed the instructions on the card that came with the software... indicating that, if I look at my computer it was telling me that my computer works... either 64 or 32, but it does not work.  So my question is, how do you know?

  You probably have the 32-bit version of XP (in most individuals, and if your system properties page does not have 64-bit, then you have 32-bit.)

  However, if you now have XP 32 - bit or 64-bit XP isn't the issue that relate to your decision to install 32-bit or 64-bit Windows 7.  This decision depends on the question to know if your hardware can support a 64-bit operating system.  In this regard, the main reason for users to install a 64-bit operating system is to allow the use of more than 4 GB of RAM.  If your hardware does support more than 4 GB of RAM, there is no interest to install the 64 bit version of Windows 7.

  You run the Windows 7 Upgrade Advisor?  With what results?

  Click Start > run and type msinfo32 in the "Open" box and click OK.
  After the system information window has had time fill, click Edit > select all, and then click Edit > copy.
  Paste (CTRL + V) into your next reply here.

• Microsoft Windows Vista Home Permium freezes to the logon screen or gets stuck

  Microsoft Windows Vista Home Permium freezes to the logon screen or crashes on the black screen with Copyright Microsoft Corporation with the load with six green bars moving through bar. It will start in safe mode. I ran the auto repair (recommended) when starting after being forced to stop. After it says its full it restarts and remains stuck on the black screen with Copyright Microsoft Corporation with the load bar with six green bars that cross so I force disable it again.

  I had no problem with this computer, he got in last seven. It was working fine yesterday and then the without wire came out, so I restarted the computer to find the connection again as I had done several times before. That's when it froze on the opening of session and password screen. Who started this cycle of freezing or stuck on the black screen with the loading bar permanently running.

  UPDATE:
  Start safe mode then made the instructions on the clean boot. Not checked, all iteams he says and rebooted and it worked. So I went to the next step to select only half to refine the list. Restarted and when at the loading screen for a little over 30 sec - 1 min (which is more short than the time it took to work initially after the first stage of the boot with all unchecked), but it goes to a completely black screen that has not happened before. So now, a little lost, or do I have to keep trying to refine?

  Hi Greg,.

  It will not harm the computer to run it in a boot environment.  Some programs do not work properly because they were probably responsible for their own services and rely on them to work.  You have disabled all non-Microsoft services, and things like printers and software can be difficult.

  Click Start, then options type power and press ENTER.  Let us make sure that the system is not configured to sleep.  Go ahead and put the power plan to High Performance, then click on change Plan settings below.  There will be a framework for "put the computer to sleep".  The value than ever.

  If it continues to turn black in clean boot mode, you may have a hardware problem.  One thing you could do if it's a desktop system and really need to use it now, it is the lid of the machine and aim a fan in the box.  This will help if it is overheating.

  Please complete the steps to diagnose the problem with the boot when you have the chance.
  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why when I run the installer for Windows 8 consumer preview on my computer of Windows XP Home Edition he says: "this platform is not supported"?

  Setup of Windows 8 consumer priview

  Why when I run the installer for Windows 8 consumer preview on my computer of Windows XP Home Edition he says: "this platform is not supported"?

  You can see this message if you downloaded Windows 8 64-bit and XP 32-bit. To start the installation of Windows 8, you will need to restart and boot from the installation of Windows 8 media.

  If you want to keep your current installation of Windows, you can install it on a separate partition and dual boot with the Windows 8 Preview of consumer. To install on a separate partition and dual boot, you must create and boot from the installation media.

  (1) first you will need a free partition on hard drive - if you do not you can shrink a partition and create a new one to install Windows 8 Preview of consumer on.
  To reduce a partition and add a new one that you can use EASEUS Partition Master (free):
  http://www.partition-tool.com/personal.htm
   
   
  (2) to install on a separate disk, you can perform an installation DVD or USB key, then boot from it so you can choose the other partition. To download the ISO file and install media:
  Download Windows 8 consumer Preview ISO:
  http://Windows.Microsoft.com/en-us/Windows-8/ISO
  After you download the ISO file - use the Windows USB/DVD Download tool to install media:
  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool
   
   
  (3) installation on a separate partition for dual boot:
  1 make a DVD or USB installation drive - to see the two options above.
  2. start from the DVD or USB install drive and click on install when prompted.
  3. during the installation process, when asked - choose a custom installation.
  4. Select a free partition on the hard disk to install Windows 8 Preview of consumer - this will install Windows 8 on a separate instead of your current Windows partition partition.
  5 continue with the installation.
     
   
   
  First of all please note:
  1 consumer preview Windows 8 is a pre-release and will only work for a limited time - when it expires, you need to remove it.
  2. the overview of consumption is stable and has been tested, but it s not the finished product. Your PC may crash and you may lose important files. You should backup your data and you shouldn't test Windows 8 Preview of consumers on your primary home or business PC.
  3. If you install the preview of consumption on the Windows partition is currently installed, you cannot uninstall the preview of consumption. To return to your previous version of Windows, you will need to reinstall from the recovery or installation media supplied with your PC.
  4. in addition to dual boot, here are a few methods to install Windows 8 Preview of consumers without affecting your current installation of Windows:
  (A) remove your current hard drive and install the Preview of consumers on a spare drive.
  (B) install it on a spare computer.
  (C) install the Preview of consumer in a virtual machine.
   
  For more information - Windows 8 consumer overview FAQ:
  http://Windows.Microsoft.com/en-us/Windows-8/FAQ

• How can I get a CD of Microsoft Windows XP Home Edition Service Pack3

  Caused by a virus, some of the files on my computer were damaged.  I was asked to get the Microsoft Windows XP Home Edition Service Pack 3 CD, so that he can fix my computer to my computer technician.  I'm having a lot of trouble to find this CD.  Anyone know how I can get an or borrow one?

  Hello

  How to replace Microsoft software or hardware, order service packs and replace product manuals
  http://support.Microsoft.com/kb/326246

  See information on the replacement on this link.
  http://social.answers.Microsoft.com/forums/en-us/w7install/thread/fb8230d4-000F-4ee7-b732-c9f8fff28bfd

  I hope this helps.

• Windows xp Home Edition running, at the center of the screen it is large icon for media player. in all programs used. Cannot delete, removing appears again at startup. any suggestions?

  Windows xp Home Edition running, at the center of the screen it is large icon for media player. in all programs used.  Cannot delete, removing appears again at startup. any suggestions?

  Hi louMIRANTI,

  ·         Since when are you facing this problem?

  ·         Remember to make changes?

  ·         This problem occurs on other user accounts?

  ·         How to remove the icon?

  Method 1: Check the question on other user accounts and see if the problem exists.

  Method 2: Let's try to run a scan online for any infection on the computer.

  Malicious software removal tool | Protect your computer

• When I click and drag a window to move its location on the screen does not move properly.

  When I click and drag a window to move its location on the screen does not move properly. It leaves a "track" of windows. Whatever the problem is scroll is also affected when the page moves in waves. Why he started to do this, and if someone can offer a solution? Thank you!

  original title: "leakage" of windows

  It is a common problem with how XP displays the items on your screen. When things get a bit bogged down, you'll start to see trails of the window as you drag. Unfortunately, there is no solution, but future versions of Windows do not have this problem with a new rendering of the graphics system.

• SR400 while the loop does not work

  Hello

  I'm using LabVIEW for control SR400 through a GPIB card.

  I use SR400 to count the number of signal in a second, wait 0.05 s, then again count the signal once, wait 0.05 s once again, and so on.

  However, the while loop didn't iterate. When I started the program, it is only once.

  In execution of highlight mode, when an iteration is finished, he waited a long period starting the next. In normal mode, it doesn't have to iterate.

  Also when I clicked the stop button, it's been clicked. However when I wrote a very simple program, the stop button worked normally.

  In any case the button issue is not very important. I don't care that the program iterates forever or not. I just want to iterate.

  I searched the jury and had not could not any related problem.

  Is it better to attach my VI? The VI is in my computer lab.

  Thank you very much!

  This code just feels bad.

  (No real management mistakes, deep, stacked sequences FOR lines that are wired to iterate through only once, controls on the right and right to left, wiring weird code on average the last 10 items (Hint: means ptbypt with a length of 10 sample he would!).) If you want to use the wire of the error, the sequences would not even necessary)

  If the stop button does not reset, it means that the iteration of the loop does not terminate. It can fill in only if the two structures of the sequence ends.

  Have you tried running in execution, emphasizing fashion while looking at the diagram? Probably one of the communications is at a standstill. For example, the instrument sends really 6 bytes at the end? When you set the overall timeout and what is it?

• After HA failover, can I do the VM does not restart?

  After HA failover, can I do the VM does not restart on the target host?

  You can set the priority "VM Restart" to "Disabled" to exclude a VM restarted on another host.

  André

• Windows XP - Home Edition: what is the administrator password? Or how to find / change (OS is OEM - only have not disk) _

  Windows XP - Home Edition - SP3.
  Is there a way to know what administrator account password?

  Standard mode:

  If you have forgotten your password, if you have another user who has administrative privileges account you can log in to that account and change the password of your account of origin of the user accounts applet in Control Panel. If you do not have another account like this set upwards or that you do not have the password which you will need to log on to the built-in Administrator account. In XP Home, start the computer in Mode safe. This, by repeatedly pressing the F8 key as the computer starts. This will put you in the right menu. Navigate using your arrow up; the mouse does not work here. Once in safe mode, you will see the normally hidden administrator account. The default password is white.

  In XP Pro, you don't need to go to Safe Mode. In the home screen, do Ctrl-Alt-Del twice to get the classic Windows logon box. Type in "Administrator" and the password that you assigned when you set up Windows.

  WRITE THE PASSWORDS DOWN AND PUT THEM SOMEWHERE YOU WON'T LOSE THEM.
  MS - MVP - Elephant Boy computers - don't panic!

• Tried to update in Windows Vista Home Premium, stuck in the "Configuring updates" and "reboot" loop 11/05/2011

  Hello! I have a portable M-6752 Gateway under Vista Home Premium.  It was perfectly functional this morning 11/05/2011.  Then I noticed the sign (of exclamation in a circle) who said the new updates.  So I started the update and thought nothing of it.  It was until an hour later and I realize that my laptop was still updated.

  Right now I am stuck in a loop between "Configuring updates: stage 3 of 3-0% complete.»  Do not turn off your computer' and auto restart.
  I tried to restart in 'safe mode' and 'safe mode with network.  These attempts did not help.  I'm still stuck in the loop and my laptop is overheating.  The only thing I could do was to be able to.  Fact that several times already.
  Fortunately, I have another laptop and is able to ask for help.  Can someone help me?  I'm NOT a technical person.  Thank you.

  Thank you, but my laptop WAS running Service Pack 2 when this problem happened.  It has been resolved.  For anyone having this problem, here is my experience and solution.

  When I found myself stuck in a loop and my laptop keeps restarting without giving an error message, it began to overheat.  I turned off.  When I turned on it again the screen "Advanced Boot Options" appeared.  I chose 'Safe Mode'.  Then, I went to "Configuring updates...". ».  Machine started himself reboot again.  It happened a few times.  Finally I had to turn the phone off again.  All of a sudden when I turned on again, the "Windows Error Recovery" screen comes on.  There is a choice, 'Launch Startup Repair'.  I chose this.  Machine asked me if it is allowed to create restore point.  Of course.  Then I GOT!  I was saved by Windows self-diagnosis program.
  If you are not familiar with the screens that I mentioned, please search 'screen name' and the word 'image' as a whole.  You will see what these screens look like.
  Now I realize there is another way to reach the Startup Repair.  When you turn on again, press the F8 key several times.  Which will bring you to the early Startup Options screen.  On advance Boot Options, there is a choice 'repair your computer', scroll down to this choice, press ENTER.
  Turning off my machine during the restart is another way to force the "early start Options" screen appears.
  I read that some do not have the "Repair your computer" option according to your PC in the screen «In advance Startup Options»  You will need to know how to get to the "Windows Error Recovery" screen.
  As a last resort, you can restart Vista recovery disk.  Many manufacturers do not understand that when they send the PC for you.  However, it is available for download for free on the internet.  You can download and make your own within 30 minutes.  I hope this helps!

• Windos Vista update mobile home premium STUCK IN THE LOOP!

  Hi, specialist qualified Windows Vista technology, but at a loss with my own laptop! Recently, I updated and now I'm stuck in an endless loop. It starts, going past logo then update 3 3 0% complete. Stops then it all over again & again & again. You get the picture. Very fustrating. Wondering if there is a known error as happened after updating with the new Explorer not working either...

  Any help appreciated

  Do a system restore and change the update settings:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  Also:
  
  Once in safe mode, to remove the updates you can do this:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your falls into the above category: download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner