Migrate Anyconnect Premium at Apex

Similar Questions

• ASA AnyConnect more vs Apex in version show license

  Hello

  I couldn't find good details on what I should see in 'show version' outings with license AnyConnect more or Apex.

  Can you please direct me to the proper documentation or examples of the 2 'show version' output with more an Apex licenses?

  Thanks in advance!

  Peter

  Hi Pete,.

  Unfortunately the ASA will show not explicit if the user uses a Plus or the license of APEX. In the vpn-sessiondb show detailed Anyconnect. The connection will say that it uses premium Anyconnect license.

  -Randy-

• AnyConnect Premium license

  I'm looking for the purchase of a license for Anyconnect Premium for the ASA5510 running IOS 8.4. I found the following, but I can not find the description of ASA-NZEV-5510 =. Is that what that means unlimited number of users?

  Shared Premium VPN Server License-500 ASA-VPN-500 users =

  Shared premium VPN Participant license - ASA 5510 ASA-NZEV-5510 =

  I worked on IOS 8.2, the CSD is a separatepurchase. Cisco Secure Desktop is included in this license? If this is not the case, what is the part number?

  OK - you need L-ASA-SSL-250.

  Purchase which allows you to get an activation code, which, when installed on your device will change

  AnyConnect Premium peers: 2 perpetual

  "250" (as opposed to the default 2).

  Please evaluate the useful messages.

• ASA 8.4 (1) user AnyConnect Premium upgrade license

  Before version 8.4 (1), Cisco has called their license name for SSL/VPN Premium AnyConnect SSL VPN users and currently the new name of the license is simply AnyConnect Premium.  In addition, the IOS show name amount users VPN/SSL enabled via your license (Exodus 2, 10, 25, 50,...) by running a 'show activation code"went under SSL VPN peers to peers Premium AnyConnect.

  That said, my question is if the upgrade license 10 users to 25 users (L-ASA-SSL-10-25 = -

  ASA 5500 SSL VPN 10 to 25 user Premium upgrade license) on a SAA before 8.4 (1) and an ASA with 8.4 (1) is always topical and the good part number make these upgrades for the two ASAs.  The description of this part number throws me because it says SSL VPN for Premium user, which was the name before 8.4 (1).  I couldn't find any documentation about this part number or to modernize the two ASAs 10 users to 25 users.

  Can someone check this part number is perfectly fine to make these upgrades?  I appreciate any help or advice.

  ' L ASA-SSL-10-25 ' of Cisco is indeed part number correct to use for the upgrade of an ASA with 8.4 (1) a user of 10 to 25 AnyConnect Premium license user.

  I agree that it would be clearer if they simply called it a "AnyConnect Premium" instead of SSL VPN license. This makes it much more confusing since the AnyConnect Essentials and Premium supports the SSL VPN client-oriented. Based on a browser (without customer) is a feature you get with Anyconnect Premium

• What VPN Client for ASA 5550 AnyConnect Premium connection?

  We have version9 a couple of ASA550 I want to put in place a VPN client for use with remote access to administration.  We have included AnyConnect VPN, Premium license peers 2 so I guess we can just use of Cisco AnyConnect VPN client.  I went to Cisco's Web site and it says that I don't have right to the last Anyconnect VPN Client 4.x but I don't have access to the version 3.x.

  The 3.x client is compatible with the ASA and also Windows 10?

  If Yes, what is the correct file to use, there are many files listed for download in AnyConnect 3.x?

  In addition, what is the difference between the AnyConnect 3.x and 4.x customer and why Cisco restricting 4.x?

  Jim

  AnyConnect 4.x has changed the licensing model. AnyConnect 4.x licenses are term based licensing vs perpetual 3.x. There are a number of other differences, mainly due to there being only two license types - more and Apex - no Mobile plus, Advanced Endpoint Assessment, shared VPN etc. Cisco offers a nominal or no license cost of migration until the end of 2015. (depending on what you have: positive Essentials or Apex at premium)

  AnyConnect 3.1 will work with Windows 10 and the latest version of the Software ASA (since Version 3.1.10010). Reference:

  http://www.Cisco.com/c/en/us/TD/docs/security/vpn_client/AnyConnect/ANYC...

  There are two ways it is distributed - as a stand-alone installation or package for the distribution of the ASA station. Both come in Windows, Mac OS X and Linux distributions. For a Windows client, you must use either:

  AnyConnect-Win-3.1.12020-pre-deploy-K9.ISO

  AnyConnect-victory - 3.1.12020 - k9.pkg

  .. .to the current version of these respective form factors.

• AnyConnect Premium - Rehost license

  Hello

  I´d would like to know how the license Premium Anyconnect rehost. Is this possible?

  I mean, I have 10 license on my ASA and now I´d to put it on an other ASA.

  How to do this?

  Kind regards.

  Sorry but what you ask is available in the case of a number of RMA (Return Material Authorization) of a failed unit. The reasoning is that the old unit will not 'license' for what is already.

  If you are the old unit and rating upgrade - tell to a 5500 to 5500 - Series X - you may be able to get your manager to bring some relief from cost under the technology transfer program, but which differs from the rehosting license.

• migration of databases of apex

  Hello members,
  We intend to migrate a database of 2.2 and applications forms and reports solaris apex apex 8 to windows 2003. There are about 4-5 schemas in the database. The total size is about 40 GB... My plan is to set up the target with Oracle 10 g machine, install apex, export workspaces, applications, export (flow patterns and patterns of object data) of all source database diagrams, import into the target database, import files to the workspace, bind workspaces to imported schemas and finally import applications using the application builder then analyze tables, check all invalid objects and check the account object. Is - to move forward and go to work? Thanks in advance.

  Don't forget to mark the answers useful or correct ;)

• AnyConnect shared license Apex

  Hello!

  If I bought a license shared apex, let's say for 2500 users and provide on 4 different boxes ASA, now can I have 2500 vpn simultaneous session on each box or the number (2500) total will be shared by 4?

  Thank you

  Josh

  A total of 2500 of my understanding.

• Migrating php site at apex, need help

  Hi all

  I am quite new to oracle apex so please forgive me if this could be a noob question.

  Request Express 4.2.2.00.11

  I have these codes for example (in php and html)

  partial php code:

  $getSelectedHospital ="SELECT
    F.FACILITY_NAME,
    F.FACILITY_CODE,
    FD.FACILITY_STATUS,
    F.FACILITY_ABC,
    F.FACILITY_ACCRE_CODE,
    F.FACILITY_ACC_START,
    F.FACILITY_ACC_END,
    F.FACILITY_TYPE,
    F.FACILITY_ADDRESS,
    F.FACILITY_CONTACT,
    F.FACILITY_EMAIL,
    F.FACILITY_HEAD
    FROM FACILITY_DETAIL FD
    INNER JOIN FACILITY F ON FD.FACILITY_ID=F.FACILITY_ID
    WHERE FD.FACILITY_DETAIL_ID=:facilityID";
  
  
  $queryGetHospitalGenInfo = $getSelectedHospital;
  $hospitalGenInfoResult = oci_parse($conn, $queryGetHospitalGenInfo);
  oci_bind_by_name($hospitalGenInfoResult, ":facilityID", $hospitalDetailID);
  oci_define_by_name($hospitalGenInfoResult, 'FACILITY_NAME', $facility_name);
  oci_define_by_name($hospitalGenInfoResult, 'FACILITY_STATUS', $facility_status);
  oci_define_by_name($hospitalGenInfoResult, 'FACILITY_CODE', $facility_code);
  oci_define_by_name($hospitalGenInfoResult, 'FACILITY_ABC', $facility_abc);
  oci_define_by_name($hospitalGenInfoResult, 'FACILITY_ACCRE_CODE', $facility_accre_code);
  oci_define_by_name($hospitalGenInfoResult, 'FACILITY_ACC_START', $facility_acc_start);
  oci_define_by_name($hospitalGenInfoResult, 'FACILITY_ACC_END', $facility_acc_end);
  oci_define_by_name($hospitalGenInfoResult, 'FACILITY_TYPE', $facility_type);
  oci_define_by_name($hospitalGenInfoResult, 'FACILITY_ADDRESS', $facility_address);
  oci_define_by_name($hospitalGenInfoResult, 'FACILITY_CONTACT', $facility_contact);
  oci_define_by_name($hospitalGenInfoResult, 'FACILITY_EMAIL', $facility_email);
  oci_define_by_name($hospitalGenInfoResult, 'FACILITY_HEAD', $facility_head);
  
  oci_execute($hospitalGenInfoResult);
  oci_fetch($hospitalGenInfoResult);
  
  
  

  partial html code:

  <td class="heading_td_top"><?php echo $facility_name;?></td>
  
  

  It is quite easy to view the results of my query in my html code since I can just echo variables of my lines of oci_define_by_name.

  How do I in the oracle apex? you have no need to spoon feed me, you can just point me to a tutorial or some keywords. Thank you!

  PS

  in my two months of game w / apex oracle, I really like it. I miss just the possibility to have codes php at my disposal when I ask things.

  Post edited by: m.davide, typo

  BillyVerreynne wrote:

  Dynamic PL/SQL region.

  Use the following pattern of PL/SQL code as the source for the region:

  HTP. PRN (')

  ' );

  for loop c in (select...)

  HTP. PRN (')'|| c.Col1 |');

  end loop;

  HTP. PRN (»)

  Develop/substitute HTML table set in the shape as needed.

  I would use regions standard report with custom report templates to keep things as declarative as possible. This approach has much better separation of concerns as a dynamic region of PL/SQL. SQL, HTML, and CSS are all treaties in layers separate and are so much easier to understand, debug and modify as PL/SQL with sliders. FOR loops; loads of very tedious HTP. P, string concatenations, '<'s and="" '="">of.

  With a lateral thinking and creative models of the line, expressions and logical query usage, standard APEX reports are able to produce complex structures and layouts:

  • Model number of custom report
  • Custom template: table in a table

  m.Davide wrote:

  90% of my php site has been implemented in my new site of apex. My only complaint are the profiles (which resembles typical profiles, as a profile facebook but for hospitals). I want to just recreate the look of my php site since my boss wants a look almost identical.

  What I intend to do, is create an HTML region where I have my own layout code. My problem is how to fill my custom html table.

  Create the layout using custom of APEX (page/region/State) templates. As Billy says forget the procedural approach of PHP and use the declarative features that provides the APEX.

• Any license of Connect for Mobile

  Hello

  I have a couple of units of ASA5525-X with premium VPN licenses, now when I connect with connect any customer for Androind. I get the message that I don't have a License.

  I found an old thread on this forum that suggests that if you have a Premium VPN license, you should be able to request a license of base as well, but I can't find where I can do or if this information is correct.

  Hello

  Later, you need to order an additional license, called 'AnyConnect for Mobile' order to use mobile devices to connect over Anyconnect.

  But in 2015 has changed the license for Anyconnect schema. Today, "AnyConnect for Mobile" license has expired. I'm not sure if it is possible to order the license today.

  According to the new licensing scheme, you must migrate Anyconnect Premium license for a new licence, called "Anyconnect Apex". With the new license "Anyconnect Apex" you don't need to have "AnyConnect for Mobile" more. Mobile devices will be able to connect using the Anyconnect client.

  Anyconnect Premium Anyconnect apex migration is free.

  But please, attention, the new licenses are subscriptions. So, after the migration to the Apex licenses, you will get a subscription for 3 years. After 3 years, you will need to renew your subscription, and it will be not free.

• Issue of license Apex AnyConnect

  Hello

  I have the AnyConnect 25 peers premium license,

  AnyConnect Premium peer: 25 perpetual
  Counterparts in other VPNS: 750 perpetual
  Total VPN counterparts: 750 perpetual
  AnyConnect for Mobile: disabled perpetual
  AnyConnect Cisco VPN phone: disabled perpetual

  Then, I bought an Apex 50 AnyConnect-user license. I recorded ASA device with number PAK received the following activation key Cisco ASA 5500 Series Adaptive Security Appliance,.

  Premium AnyConnect peers: 750
  Other VPN peers: by default
  Assessment of Advanced endpoint: enabled
  AnyConnect for Mobile: enabled
  AnyConnect VPN phone Cisco: enabled

  It seems to be that I have not 50 but 750 available AnyConnect peers. Why?

  Thank you

  AnyConnect licenses are not additive.

  If you have installed the activation key / license for 50 Apex then you are licensed for 50 users Apex.

  Which replaces the old license that is no longer installed - you can return to it only if you have the old activation key.

• Would become Anyconnect essentials Premium AnyConnect vpn on asa

  Dear team,

  We have a pair of cisco ASA 5520 with version 8.2 (5) works well with active mode / standby. As the situation requires, we intend to change the SSL vpn to clientless SSL VPN (AnyConnect Premium) to anyconnect vpn with mobile clients (IOS & Android)

  Please specify below

  (1) I have read, we cannot have two Anyconnect Essentials & AnyConnect Premium on the same system time. We need to disable accordingly to our need-pl correct me?

  (2) what is the best way to have the device for end-user client deployment? pushing of ASA or install individually on the system? Can I have the best, I mean the latest version of windows, client MAC e.t.c I shud get?

  While pushing ASA LU that much memory cache will be used, since we have IPS (AIP - SSM) modules has also installed on ASA who shud method I adopt here?

  (3) what is the exact product for license Anyconnect Essentials & customer name mobile (IOS & Android) we get from cisco?

  (4) once I get the correct license how do I active in systems? should I remove the failover command and install the license in two devices separately?

  (5) Finally, I need to authenticate vpn anyconnect essentials with LDAP that is already configured for clientless SSL VPN(AnyConnect Premium). any suggestions here?

  Below the version Sh emitted by the devices, it seems essential Anyconnect is already active... Please correct me?

  Active Firewall
  ===============

  System image file is "disk0: / asa825 - k8.bin.
  The configuration file to the startup was "startup-config '.

  Material: ASA5520, 2048 MB RAM, Pentium 4 Celeron 2000 MHz processor
  Internal ATA Compact Flash, 256 MB
  BIOS Flash Firmware Hub @ 0xffe00000, 1024 KB

  Hardware encryption device: edge Cisco ASA - 55 x 0 Accelerator (revision 0 x 0)
  Start firmware: CN1000-MC-BOOT - 2.00
  SSL/IKE firmware: CNLite-MC-Smls-PLUS - 2.03
  Microcode IPSec:-CNlite-MC-IPSECm-HAND - 2.05

  0: Ext: GigabitEthernet0/0: the address is a493.4ca3.ce0a, irq 9
  1: Ext: GigabitEthernet0/1: the address is a493.4ca3.ce0b, irq 9
  2: Ext: GigabitEthernet0/2: the address is a493.4ca3.ce0c, irq 9
  3: Ext: GigabitEthernet0/3: the address is a493.4ca3.ce0d, irq 9
  4: Ext: Management0/0: the address is a493.4ca3.ce09, irq 11
  5: Int: internal-Data0/0: the address is 0000.0001.0002, irq 11
  6: Int: internal-Control0/0: the address is 0000.0001.0001, irq 5

  The devices allowed for this platform:
  The maximum physical Interfaces: unlimited
  VLAN maximum: 150
  Internal hosts: unlimited
  Failover: Active/active
  VPN - A: enabled
  VPN-3DES-AES: enabled
  Security contexts: 2
  GTP/GPRS: disabled
  SSL VPN peers: 2
  Total of the VPN peers: 750
  Sharing license: disabled
  AnyConnect for Mobile: disabled
  AnyConnect Cisco VPN phone: disabled
  AnyConnect Essentials: enabled
  Assessment of Advanced endpoint: disabled
  Proxy sessions for the UC phone: 2
  Total number of Sessions of Proxy UC: 2
  Botnet traffic filter: disabled

  This platform includes an ASA 5520 VPN Plus license.

  =====================================================

  Firewall standby
  ================

  Updated Saturday, May 20, 11 16:00 by manufacturers
  System image file is "disk0: / asa825 - k8.bin.
  The configuration file to the startup was "startup-config '.

  Material: ASA5520, 2048 MB RAM, Pentium 4 Celeron 2000 MHz processor
  Internal ATA Compact Flash, 256 MB
  BIOS Flash Firmware Hub @ 0xffe00000, 1024 KB

  Hardware encryption device: edge Cisco ASA - 55 x 0 Accelerator (revision 0 x 0)
  Start firmware: CN1000-MC-BOOT - 2.00
  SSL/IKE firmware: CNLite-MC-Smls-PLUS - 2.03
  Microcode IPSec:-CNlite-MC-IPSECm-HAND - 2.05

  0: Ext: GigabitEthernet0/0: the address is 6073.5cab.3fae, irq 9
  1: Ext: GigabitEthernet0/1: the address is 6073.5cab.3faf, irq 9
  2: Ext: GigabitEthernet0/2: the address is 6073.5cab.3fb0, irq 9
  3: Ext: GigabitEthernet0/3: the address is 6073.5cab.3fb1, irq 9
  4: Ext: Management0/0: the address is 6073.5cab.3fb2, irq 11
  5: Int: internal-Data0/0: the address is 0000.0001.0002, irq 11
  6: Int: internal-Control0/0: the address is 0000.0001.0001, irq 5

  The devices allowed for this platform:
  The maximum physical Interfaces: unlimited
  VLAN maximum: 150
  Internal hosts: unlimited
  Failover: Active/active
  VPN - A: enabled
  VPN-3DES-AES: enabled
  Security contexts: 2
  GTP/GPRS: disabled
  SSL VPN peers: 2
  Total of the VPN peers: 750
  Sharing license: disabled
  AnyConnect for Mobile: disabled
  AnyConnect Cisco VPN phone: disabled
  AnyConnect Essentials: enabled
  Assessment of Advanced endpoint: disabled
  Proxy sessions for the UC phone: 2
  Total number of Sessions of Proxy UC: 2
  Botnet traffic filter: disabled

  This platform includes an ASA 5520 VPN Plus license.

  Thank you

  1 correct. You can run one or the other, but not both.

  2 since you have the upgrade memory to 2 GB, you should be fine perform web deployment via the pkg file method.

  3. for a 5520, you need:

  L-ASA-AC-E-5520 =
  L-ASA-AC-M-5520

  .. .to the Essentials and Mobile licenses respectively.

  4. on ASA 8.2, you need licenses for both units. If you upgrade to 8.3 + (8.4 (7) recommend at least), you can share licenses between members of a pair of HA. If you choose not to upgrade, just apply the key of activation on the rescue unit, then on the unit activates. You don't need to move on and in the failover configuration. Failover of the rescue unit status will show as ineligible briefly while he holds the new license is not the case of the active unit. Which will be resolved after you have applied the same license on the main unit. (If you were on 8.3 + would not happen at all).

  5. simply create a new connection profile for customers of Essentials by using the same AAA server group.

• Application migration from one instance to another apex.

  Hello

  I am currently migrating applications to the apex of one instance to another. APEX version is 3.0.1.

  I could install apex and recreate the workspaces in the new instance, but I have problems exporting applications.

  -APEX is not listed in SQL Developer, when I browse to the schema.

  -I'm not able to export with APEXExport.class, I get

  Exception in thread "main" java.lang.AbstractMethodError

  to _Jv_MakeVTable (java.lang.Class) (/ usr/lib/libgcj.so.5.0.0)

  to _Jv_PrepareClass (java.lang.Class) (/ usr/lib/libgcj.so.5.0.0)

  to _Jv_WaitForState (java.lang.Class, int) (/ usr/lib/libgcj.so.5.0.0)

  to java.lang.VMClassLoader.linkClass0 (java.lang.Class) (/ usr/lib/libgcj.so.5.0.0)

  to java.lang.VMClassLoader.resolveClass (java.lang.Class) (/ usr/lib/libgcj.so.5.0.0)

  at java.lang.Class.initializeClass () (/ usr/lib/libgcj.so.5.0.0)

  to oracle.jdbc.driver.OracleStatement.executeQuery (java.lang.String) (unknown Source)

  at oracle.jdbc.dbaccess.DBAccess.setNlsParamsClient (oracle.jdbc.driver.OracleConnection) (unknown Source)

  at oracle.jdbc.ttc7.TTC7Protocol.initNls (oracle.jdbc.driver.OracleConnection) (unknown Source)

  at oracle.jdbc.driver.OracleConnection.OracleConnection (oracle.jdbc.dbaccess.DBAccess, java.lang.String, java.lang.String, java.lang.String, java.lang.String, java.util.Properties) (unknown Source)

  to oracle.jdbc.driver.OracleDriver.getConnectionInstance (java.lang.String, java.lang.String, java.lang.String, java.lang.String, java.lang.String, java.util.Properties) (unknown Source)

  to oracle.jdbc.driver.OracleDriver.connect (java.lang.String, java.util.Properties) (unknown Source)

  at java.sql.DriverManager.getConnection (java.lang.String, java.util.Properties) (/ usr/lib/libgcj.so.5.0.0)

  at java.sql.DriverManager.getConnection (java.lang.String, java.lang.String, java.lang.String) (/ usr/lib/libgcj.so.5.0.0)

  -I'm not able to export using the interface of the apex, because they are not listed.

  Any clue?

  Thank you

  Cyrille

  I answer myself

  The application needed to be "Run and build the Application" in the State to build to be seen.

• Excel applications Apex application migration

  Is it possible to migrate Excel applications applications apex?
  
  Because as much as I know that we can create the worksheet data applications, but is it possible to migrate Excel at apex application such as the migration of forms Microsoft access application/oracle and apex using available apex OR do application reports we have both different ways instead of developing from scratch?
  
  Please notify.
  
  Thank you
  Oar.

  Hello

  It is not possible to Excel applications applications Apex migration.

  Yes, you can create the data of the spreadsheet application.

  Kind regards

  Patel Kartik
  ------------------------------------------------------------------------
  http://patelkartik.blogspot.com/
  http://Apex.Oracle.com/pls/Apex/f?p=9904351712:1

• Installing AnyConnect Mobile licenses

  I want to clarify how exactly a Cisco AnyConnect Mobile license is applied to an ASA. Does as a PAK and then a license key is created? Y at - it a separate to enter specifically for the mobile command?

  The mobile license was delivered as a PAK who was converted into a license key.

  But today, you buy the mobile license more, instead you buy 4 AnyConnect more or APEX which includes the mobile service.

  If you already have Essentials or premium, you can get the license migration until the end of the year.