Installing AnyConnect Mobile licenses

Similar Questions

• AnyConnect Mobile license

  Hello

  I have 2 questions about the mobile Anyconnect license?

  1. Why is there a mobile separate license for mobile devices for SSL VPN on an ASA firewall in addition to the regular essentials license, but when using the SSL VPN on the latest IOS routers, that a license is required? (I can connect to the IOS router with our mobile devices without error message)

  2 is supported for setting up Cisco IOS ssl vpn on demand router? (Trying to implement access remote jabber)

  1. it is a business of Cisco and just something we implementers should work with. For what it's worth, AnyConnect 4.0 is licensed differently and do not require a separate mobile license.

  2. I don't know about that one.

• AnyConnect mobile license, help

  Hello

  I'm a little lost with licensing

  I have an ASA 5510, and I would like to be able to use mobile devices (Android/iOS) with anyconnect.

  See below my "sh worm":

  ================================

  Cisco Adaptive Security Appliance Version 8.2 software (1)

  Version 6.4 Device Manager (9)

  Updated Wednesday, 5 May 09 22:45 by manufacturers

  System image file is "disk0: / asa821 - k8.bin.

  The configuration file to the startup was "startup-config '.

  api03 - in 29 days 4 hours

  Material: ASA5510, 512 MB RAM, Pentium 4 Celeron 1600 MHz processor

  Internal ATA Compact Flash, 256 MB

  BIOS Flash M50FW080 @ 0xffe00000, 1024 KB

  Hardware encryption device: edge Cisco ASA - 55 x 0 Accelerator (revision 0 x 0)

  Start firmware: CN1000-MC-BOOT - 2.00

  SSL/IKE firmware: CNLite-MC-Smls-PLUS - 2.03

  Microcode IPSec:-CNlite-MC-IPSECm-HAND - 2.04

  0: Ext: Ethernet0/0: the address is 0022.90fe.14c4, irq 9

  1: Ext: Ethernet0/1: the address is 0022.90fe.14c5, irq 9

  2: Ext: Ethernet0/2: the address is 0022.90fe.14c6, irq 9

  3: Ext: Ethernet0/3: the address is 0022.90fe.14c7, irq 9

  4: Ext: Management0/0: the address is 0022.90fe.14c3, irq 11

  5: Int: not used: irq 11

  6: Int: not used: irq 5

  The devices allowed for this platform:

  The maximum physical Interfaces: unlimited

  VLAN maximum: 50

  Internal hosts: unlimited

  Failover: disabled

  VPN - A: enabled

  VPN-3DES-AES: enabled

  Security contexts: 0

  GTP/GPRS: disabled

  VPN SSL counterparts: 50

  The VPN peers total: 250

  Sharing license: disabled

  AnyConnect for Mobile: disabled

  AnyConnect for Linksys phone: disabled

  AnyConnect Essentials: disabled

  Assessment of Advanced endpoint: disabled

  Proxy sessions for the UC phone: 2

  Total number of Sessions of Proxy UC: 2

  Botnet traffic filter: disabled

  This platform includes a basic license.

  ================================

  My cisco contact told me: 'you must only ASA-AC-M-5510.

  can anyone confirm? I would like to be sure before buy you.

  Best regards

  Nicolas

  Yes, that is absolutely right.

  Since you already have the AnyConnect Premium license for 50 users (SSL VPN peers: 50)

  , then to connect mobile devices, all you need is the ASA-AC-M-5510.

• Cisco Anyconnect mobile licenses

  Hello

  We need to buy 1200 anyconnect Apex licence, I read the ordering guide

  for anyconnect but he's confused, I have to mention that we have 2 ASA 5545 - X in cluster mode,

  I don't know how to order. It's the way that I think is true, but I'm not sure.

  part number                                                   Qty

  ----------------------------------------------------------------------

  L AC-APX-5 YR-G AC-APX-5 YR - 1 K - S 1

  L AC-APX-5 YR-G AC-APX-5 YR-100 S 2

  Thank you.

  It would be OK for a 5 years AnyConnect Apex for 1,200 users license.

  Note the Mobile feature is included with Apex or Base Anyconnect 4.x licenses.

• iPad, AnyConnect Mobile license question

  Hello

  I'll put up an ASA5505 allow a VPN with the certificate of the Client AnyConnect Secure Mobility Client (iPad)

  However I get a message 'not of License"return of the ASA on the iPad - Anyconnect.

  I remember reading that the ASA5505 came with two licenses. Or am I wrong?

  Thank you for your help

  Edward

  No, the mobile AnyConnect license allow only ASA accept the SSL of the mobile client connection.

  If you want to use the certificate as authentication, then you will need to purchase the certificate from a CA. OR, you can configure the ASA as the CA server and it can produce certificate for the client.

  Alternatively, if you require a certificate, such as authentication, then CA certificate is not necessary at all.

• Disable/remove Anyconnect mobile on SAA license?

  Hello

  Recently installed the Anyconnect mobile license to allow users of iPhone/iPad to connect to our SSL VPN from Cisco ASA. However, we want to turn this feature off. Is it possible to remove or disable this license or may not allow users to connect successfully to our Cisco ASA Apple iOS environment?

  BR!

  Patrik

  To remove the license, keep a copy of the current activation key you have. In this case, you want to reactivate the AnyConnect mobile license, then you can just reactivate using the current activation key.

  To actually remove the license activation key AnyConnect, send an email to [email protected] / * /. Include a copy of 'see the version' and advise them that you want to get an activation without the AnyConnect Mobile license key. Once they provide you with the new activation key (which excludes the AnyConnect Mobile license), you can enter this new key on the SAA.

• Question about the license of Cisco's AnyConnect Mobile

  Hello

  I was reading on anycconnect, and I have a doubt,

  Do I need Cisco AnyConnect mobile license if I establish a vpn with the ASA windows desktop using the anyconnect client?.

  or these licenses are needed only when I use anyconnect on mobile platforms (iphone, ipad, Android)?

  hope someone clarify this point for me,

  Kind regards

  Juan Pablo Hidalgo

  It is useless to AnyConnect Mobile licenses for users who connect from a Windows desktop computer. These permits are only required for users with mobile platforms.

• AnyConnect Mobile and Premium SSL free licenses

  Hello

  I currently have a pair of ASA5510 HA, if I understand the 2 free premium licenses can be used by the mobile client, as long as the ASA has the license for mobile clients?

  Can someone confirm that my interpretation is correct, or I have to buy a separate license to the premium one long with the license mobile client to enable this feature?

  Thanks for your time.

  Hello

  That's right! I did the same action on an ASA5505. In this case, you only need the anyconnect mobile license.

  Please mark answered for useful messages.

• Cisco Anyconnect Essentials License - What is it

  Hello community.

  I managed to install an ASA with Anyconnect. The Anyconnect client on my laptop works very well.

  But why now to buy a Cisco Anyconnect Essentials License, what exactly is this license?

  AnyConnect works fine without this license.

  But I can not connect with my IPhone with the Cisco Anyconnect for Iphone App. should I buy the Anyconnect for Mobile license and this license just for a single device or all devices. Because this license is really cheap. Cisco licenses normally are expensiv.

  Thank you and best regards patrick

  If you have not all AnyConnect Premium licenses, then you are limited to two simultaneous connections if you do not have the license of anyConnect Essentials. You are right, for i-devices (and Android...) you need the AnyConnect Mobile license.

  AnyConnect Essentials both AnyConnect Mobile are approved by ASA, not user connections. And AnyConnect Mobile needs AnyConnect essential or Preimium AnyConnect license must be activated.

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• Configure AnyConnect (Mobile) on ASA5505

  I found some tutorials and guides on how to Setup on an ASA5505 AnyConnect, but I wanted to check before to make sure I was going to the right direction.

  Installation program:

  I have a very simple installation and the basic objective.  I have currently just a laptop on my ASA5505 E0/1 and then the ASA is configured with a static IP connected to the Internet.  I have ASA correctly configured and you can browse the web through the laptop.

  I also AnyConnect and AnyConnect Mobile licenses as well.

  Objective:

  I want to configure on the ASA5505 AnyConnect and simply to establish a successful connection to a device mobile android running AnyConnect necessary software on the market.

  ===========

  There are plenty of guides for specifc set ups, but as described, I want to keep it is as simple as possible.

  It would be a good guide to complete this?

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a0080972e4f.shtml

  Also, I am more comfortable with the CLI. Is it easier to use the ASDM Assistant for this?

  Thanks in advance.

  Hello Joffroi,

  Please check the question as answered so future users can learn from your own resolution

  Kind regards

  Julio

• Install the client via a browser web w. ANyConnect Essentials license?

  I wonder if it is still possible for individual users install the AnyConnect client by authenticating is via a web browser and allow the web browser to launch the installation, even if the device that the user connects to is running in mode anyconnect essentials?

  In addition, a bonus question: If there are several groups of tunnel and I want the user to know the name of the tunnel group in order to connect (because I don't want to show which groups of tunnel are available), can I force a user to access a specific URL to connect to this group of specific tunnel? I did it with the premium version of the AnyConnect VPN in my lab, but still works for the most part? And what happens if the user starts the AnyConnect client and connects without using the web browser to open the VPN session? The AnyConnect client remember what tunnel group was finally to that specific device or what I have to show which groups of tunnel are available in the AnyConnect client to allow the user to reconnect to this group of specific tunnel?

  Oscar

  You can continue to launch web AnyConnect the Essentials installed with a license. In order to direct users to a particular group of tunnel without using an alias and drop-down, you can configure the group URL. For example, you have a tunnel group called employee and another contractor called. With the group URL, users can access the respective web portal by entering https://vpn.test.com/employee or https://vpn.test.com/contractor. For users who already have the AnyConnect client installed, you can either insert the group above url in the connection box, or you can configure a host name address and the host by using a profile.

• ASA 5500 x new anyconnect VPN license structure

  I wonder if anyone can give me some insight on the new ASA VPN (SSL VPN) structure of license.  Currently, I have anyconnect premium license installed on the ASA 5500 series but want to buy the same type of license for x ASA 5500 series.  I understand the premium license is required for SSL VPN and webvpn.  Can someone find out if the premium anyconnect and anyconnect essentials license has been replaced by the Cisco Anyconnect Apex licence?

  The new AnyConnect Apex maps old Premium licenses. They are now focused on the term (1, 3-5 years) and have been approved by a single user (regardless of the number of devices) vs. concurrent users on the old regime.

  Apex (or the old premium) is required for clientless SSL VPN. Regular-based on the SSL VPN client AnyConnect requires no Apex but can be done by using only more licenses.

  The new AnyConnect Plus is the old Essentials plus mobile licenses. There is an option of perpetual and based on the duration.

  By single user licensing is a terms and conditions / EULA stuff and not enforced by technical means at the moment.

• AnyConnect VPN license on ASA 5510

  Hello

  We have ASA 5510 IPS with basic license. We must now Anyconnect support for more than 2 users.

  Anyconnect (tunnel mode) but essentially Anyconnect license enough? Do need me a license for SSL VPN peers?

  What about Anyconnect without customer, I see that I need a premium license?

  This one is pretty ASA5510-SSL50-K9? It's really expensive compared the Anyconnect Essentials.

  Here is my worm out sh:

  The devices allowed for this platform:
  The maximum physical Interfaces: unlimited
  VLAN maximum: 50
  Internal hosts: unlimited
  Failover: disabled
  VPN - A: enabled
  VPN-3DES-AES: enabled
  Security contexts: 0
  GTP/GPRS: disabled
  SSL VPN peers: 2
  The VPN peers total: 250
  Sharing license: disabled
  AnyConnect for Mobile: disabled
  AnyConnect Cisco VPN phone: disabled
  AnyConnect Essentials: disabled
  Assessment of Advanced endpoint: disabled
  Proxy sessions for the UC phone: 2
  Total number of Sessions of Proxy UC: 2
  Botnet traffic filter: disabled

  This platform includes a basic license.

  Yes, AnyConnect Premium includes all the SSL features (including the complete tunnel mode AnyConnect - which is what sustains essential AnyConnect).

  So if you buy the 50 user for AnyConnect Premium license, you can have up to 50 SSL VPN connections, if they are the combination of all without customer, or combination of tunnel without customer and full, or just full tunnel. All with a maximum of 50 simultaneous SSL tunnels.

• I can't install PlayMemories Mobile

  I have a MacBook Pro (retina, 13 inches, early 2015), and I can not install PlayMemories Mobile (application to connect to my Sony camera). The message: "Cannot open the application"PlayMemories Mobile.app"because it is not supported on this type of Mac." There is another option? Thank you!

  Are you sure that the PlayMemories Mobile application is not only for the devices (iPad, iPhone, etc) not for Macs

  that run on the Mac OS X platform.

  The App Store and the Mac App Store are different.

• I can't install the mobile dongle T on Windows Vista.

  Hello

  My problem is simple, I brought a t-moble dongle the other day, but it won't let me install the software on my computer, when I insert the dongle the box blinks for barly 1 second and then goes again and nothing is displayed on the section 'my computer '.

  I tried another dongle and had the same problem, but have you tried my dongle on their computer and works very well.

  my computer is a Compaq Windows Vista

  Help, please!

  Thank you very much, Chris

  Original title: problem installing t-mobile on my Compaq computer

  Hi samjames2009,

  Thanks for posting your query in the Microsoft Community. You seem to have a problem with the dongle T mobile on the Windows Vista-based computer. We can get this fixed number by systematically. It can be frustrating for you. But, don't worry, we're here to help.

  We start with a few questions-

  (1) that you get an error message or error code?

  (2) have you made changes on the computer?

  I would like more information about the issue.

  Method 1-

  It is likely that USB on your computer are defective because your dongle actually works on other computers.

  I'd like you try to connect the dongle on different USB ports and check.

  Method 2-

  I wish that you are running the FixIt-

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Diagnose and automatically fix the Windows USB problems

  http://support.Microsoft.com/mats/Windows_USB_diagnostics

  We know if you need help. We will be happy to help you.

  Thank you.